Hello, my name is Levi, and welcome to FS2S! (From Shit 2 Sick)! I'm just trying to build cool stuff lol. Building vehicles is my passion and I figured I’d share with with the rest of the world!
Wait so did you cut the firewall or just bang the firewall
@FS2S5 күн бұрын
@@christianmeehl3345 just banged it out a little bit
@christianmeehl33455 күн бұрын
Oh sweet thank you I really didn’t wanna cut mine
@Kingleekofficial15 күн бұрын
Too cold bro I stg
@Kingleekofficial15 күн бұрын
So elite bro I might have to copy 😂
@peterv18419 күн бұрын
How’s the bumper holding up in 2024?
@boldlionpro281419 күн бұрын
Awesome!
@itsup20222 күн бұрын
What size lift ?
@rubendelatorre8324Ай бұрын
Man some 26x16 would look amazing on that
@137kadynАй бұрын
Did you get any engine codes?
@Wicked_RotF30Ай бұрын
Yea, i could never get in a truck that high. Did you re-gear? I’m assuming you didnt because it wasnt shown. What gears are in the truck? I plan on running 37s but on a smaller lift.
@darknes7800Ай бұрын
Without an epoxy primer.....that paint is going flake right off !
@ddunaway2008Ай бұрын
Who did your headlights? Is there a video on it?
@FS2SАй бұрын
I did, and unfortunately no there isn’t. There are videos of how to paint tail lights on my channel, and it’s a very similar process!
@user-jb7fy6ju6dАй бұрын
where did u get the lights and how much
@jaiheira2 ай бұрын
💪🏿💪🏿💪🏿💯💯💯
@king_solomon80292 ай бұрын
When you click to see dude paint a bumper and he puts in lights first instead. I love it 🤣
@alexramon57322 ай бұрын
I need to know what rca’s you connected to
@b_l69152 ай бұрын
now make a turn
@Tomioka_giyuusimp2 ай бұрын
First,pin?
@Tomioka_giyuusimp2 ай бұрын
First, pin?
@nathanholycross41243 ай бұрын
That bumper and fender difference would bug the shit out of me!!
@FS2S3 ай бұрын
Then don’t do it 👍🏼
@user-tg6lf7ye3f3 ай бұрын
I started watching this at 9pm tonight, it's now 9:27 pm an I have my sall saw in my hand headed to my Tahoe 😂
@danree40383 ай бұрын
Where did you get the spacer kit
@tuwhelzreally7413 ай бұрын
Says 15 inch lift my ass
@TheLifted993 ай бұрын
Why arent you shimming or blocking off the egr
@ShillDozer3 ай бұрын
1:38 That is your particulate filter. Roll it up and shove it in the pipe.
@Leadfollowor3 ай бұрын
REALLY HATE YOU!
@NoBusters20233 ай бұрын
Sounds good
@arthurdelacruz68793 ай бұрын
Bout to do this to my tahoe
@beldozer27034 ай бұрын
Where are the headlights from? Was it just plug and play?😍
@richardharber84344 ай бұрын
Cut past the hanger so it’s still holding so close to the muffler
@oralwayne72734 ай бұрын
HOW LOND ARE THOSE LONGER SPRINGS ?
@RandomBodyshopGuy4 ай бұрын
So you left the erg in
@Alex09924 ай бұрын
im shocked you found a buyer for that thing 😂
@mr.louielou43094 ай бұрын
Dude awesome. Do you have a video related to how and where you connected those reverse lights to?
@SRTmixes4 ай бұрын
I just seen you on the rode
@magnusosmond18354 ай бұрын
I really thought he was about to Jack it up to work on it. I can’t stand how dam high it is, it looks like a slug bug on skate board wheels
@mitzxx89954 ай бұрын
Do this and the upper ball joint will fail in six months or less and the truck will ride like shit. lift or level it the correct way don't do what he did trust me.
@mannyknoxville2474 ай бұрын
Liked this video so much I had to watch it twice 👌🏾 also going to pick up my 2007 Suburban tomorrow morning I’m so excited I probably won’t even sleep
@coneyoster12754 ай бұрын
I'm grabbing an 08 w/ 110k miles, so I'm checking out a bunch to see what I wanna do. good luck bro
@FS2S4 ай бұрын
Hell yeah! Did you end up picking it up??
@mannyknoxville2474 ай бұрын
@@FS2S no not the one I wanted, the frame ended up being rusted out right under the driver side passenger door. I’m still keeping my hopes of. It just gives me more time to look at other suburban’s, and also save up for mods.
@Kingleekofficial15 күн бұрын
@@coneyoster1275did you get it? I’m trying to get mine exactly like this nbs
@dannysavagedraftguru5 ай бұрын
C&NT buy a Prius
@Ruffles2065 ай бұрын
Where I can order the tunner?
@samuelking38914 ай бұрын
There is companies in Canada that will ship to US
@ricocolbert91085 ай бұрын
We’re did you buy cd player that nice ?
@POMAH_MOHISH5 ай бұрын
Put a duramax in it
@gonzaf2505 ай бұрын
That’s next on my list. I got a 03 z71 suburban on a 6in lift and a 3in body lift with 3in leveling keys (not cranked). I’m running 37s and want to go 40s!
@FS2S5 ай бұрын
Yesssss 40s take it to the next level!
@thomasriverson35365 ай бұрын
Looks 2 wheel drive otherwise you'd for sure see that front Driveline angle. Also there's no way this is very off-road/flex friendly so mallcrawler at best
@FS2S5 ай бұрын
It’s a 4x4. Only reason drive shaft wasn’t in is because exhaust is in the way.
@malibu456805 ай бұрын
Awesome video bro i like the way it came out.. Just would like to see an updated Video on how is it holding up i also want to do this to my truck... Thanks
@FS2S5 ай бұрын
Thank you! I don’t have the truck anymore, but it held up perfectly while I had it!
@tomhopkins67585 ай бұрын
Looks good 😊
@FS2S5 ай бұрын
Thanks!
@esequielmorales29485 ай бұрын
How much did u $ for the truck
@BCool-qf8em5 ай бұрын
I don't understand English very well, but I would like to know what type of headlights he put on the car. Thank you.
@fishy20255 ай бұрын
Probably sum after market led headlights from online like amazon or something
Пікірлер
4000$ take it or leave it
Wait so did you cut the firewall or just bang the firewall
@@christianmeehl3345 just banged it out a little bit
Oh sweet thank you I really didn’t wanna cut mine
Too cold bro I stg
So elite bro I might have to copy 😂
How’s the bumper holding up in 2024?
Awesome!
What size lift ?
Man some 26x16 would look amazing on that
Did you get any engine codes?
Yea, i could never get in a truck that high. Did you re-gear? I’m assuming you didnt because it wasnt shown. What gears are in the truck? I plan on running 37s but on a smaller lift.
Without an epoxy primer.....that paint is going flake right off !
Who did your headlights? Is there a video on it?
I did, and unfortunately no there isn’t. There are videos of how to paint tail lights on my channel, and it’s a very similar process!
where did u get the lights and how much
💪🏿💪🏿💪🏿💯💯💯
When you click to see dude paint a bumper and he puts in lights first instead. I love it 🤣
I need to know what rca’s you connected to
now make a turn
First,pin?
First, pin?
That bumper and fender difference would bug the shit out of me!!
Then don’t do it 👍🏼
I started watching this at 9pm tonight, it's now 9:27 pm an I have my sall saw in my hand headed to my Tahoe 😂
Where did you get the spacer kit
Says 15 inch lift my ass
Why arent you shimming or blocking off the egr
1:38 That is your particulate filter. Roll it up and shove it in the pipe.
REALLY HATE YOU!
Sounds good
Bout to do this to my tahoe
Where are the headlights from? Was it just plug and play?😍
Cut past the hanger so it’s still holding so close to the muffler
HOW LOND ARE THOSE LONGER SPRINGS ?
So you left the erg in
im shocked you found a buyer for that thing 😂
Dude awesome. Do you have a video related to how and where you connected those reverse lights to?
I just seen you on the rode
I really thought he was about to Jack it up to work on it. I can’t stand how dam high it is, it looks like a slug bug on skate board wheels
Do this and the upper ball joint will fail in six months or less and the truck will ride like shit. lift or level it the correct way don't do what he did trust me.
Liked this video so much I had to watch it twice 👌🏾 also going to pick up my 2007 Suburban tomorrow morning I’m so excited I probably won’t even sleep
I'm grabbing an 08 w/ 110k miles, so I'm checking out a bunch to see what I wanna do. good luck bro
Hell yeah! Did you end up picking it up??
@@FS2S no not the one I wanted, the frame ended up being rusted out right under the driver side passenger door. I’m still keeping my hopes of. It just gives me more time to look at other suburban’s, and also save up for mods.
@@coneyoster1275did you get it? I’m trying to get mine exactly like this nbs
C&NT buy a Prius
Where I can order the tunner?
There is companies in Canada that will ship to US
We’re did you buy cd player that nice ?
Put a duramax in it
That’s next on my list. I got a 03 z71 suburban on a 6in lift and a 3in body lift with 3in leveling keys (not cranked). I’m running 37s and want to go 40s!
Yesssss 40s take it to the next level!
Looks 2 wheel drive otherwise you'd for sure see that front Driveline angle. Also there's no way this is very off-road/flex friendly so mallcrawler at best
It’s a 4x4. Only reason drive shaft wasn’t in is because exhaust is in the way.
Awesome video bro i like the way it came out.. Just would like to see an updated Video on how is it holding up i also want to do this to my truck... Thanks
Thank you! I don’t have the truck anymore, but it held up perfectly while I had it!
Looks good 😊
Thanks!
How much did u $ for the truck
I don't understand English very well, but I would like to know what type of headlights he put on the car. Thank you.
Probably sum after market led headlights from online like amazon or something
Actually I think their called spec d headlights
How much was it for wheels an suspension?
More money than brains