Пікірлер

• 
  @bwset694 күн бұрын

  Do you have 360 camera on your truck ? If so did you move your rear cameras to the topper ?

• 
  @clarencemckimmy943719 күн бұрын

  Just installed ICON 3. Coilovers and their UCA. Did it by watching your video and instruction by Icon. My only problem is now I have a gearshift stock in park unless I use the little pressure switch by the shifter. Going to have to take it to the dealer to erase the codes. Thx for the video.

• 
  @TommyLinebarger19 күн бұрын

  Oh no! That’s odd for that to trigger.

• 
  @clarencemckimmy943719 күн бұрын

  @@TommyLinebarger I OBDII code reader is finding anytthing, so going to head over to Toyota Monday. But again thanks for showing an easier way of doing it.

• 
  @TommyLinebarger18 күн бұрын

  @clarencemckimmy9437 glad it was helpful!

• 
  @clarencemckimmy943713 күн бұрын

  @@TommyLinebarger it was a short in a wire, they just got the parts in and hopefully it will be fixed on the 9th

• 
  @TommyLinebarger12 күн бұрын

  @clarencemckimmy9437 that’s not too bad then

• 
  @kevinpaskovich40622 күн бұрын

  Lol at this guy who commented , sick video man cant wait to keep watching thanks for all the help im learning as well doing this soon on my e36 m3 272k miles

• 
  @TommyLinebarger17 күн бұрын

  Happy to help!

• 
  @yoslater23 күн бұрын

  Great video, I used this to install the same grill and lights that you have in the video. Thanks. You mentioned a wiring diagram in the video, am I missing it somewhere? I am pretty sure I have it but wanted confirmation from a diagram. Thanks again.

• 
  @TommyLinebarger23 күн бұрын

  Should have been the same one included with the kit. Thanks 👍🏼

• 
  @triggerman109224 күн бұрын

  Honking a horn at a stoplight just to check it may be the wrong time dude. Somebody could take that wrong and road rage on your ass. Just a tip

• 
  @tamimahasan5209Ай бұрын

  Hello, I saw that your content quality and Thumbnail is also good. But, your channel is not Growing. Then, I analyzed and I saw that in your channel have some problems. That's why your channel is not growing. Mainly, you are not reaching to your targeted peoples, If you can solve these problems your channel will grow like a storm. Can I tell these problems? Can I tell here? Are you allow? And how are you? can I tell here? Are you here?

• 
  @4rr44EАй бұрын

  Nice skid plate package. They’ll help catch parts when the engine blows 👍

• 
  @clarencemckimmy9437Ай бұрын

  Looks great, how difficult was the UCA to do, getting ready to install Icon 3’’ lift with their UCA’s?

• 
  @TommyLinebargerАй бұрын

  They weren’t hard as long as you remove the stuff under the hood to remove the bolt

• 
  @ryanlight1013Ай бұрын

  Why does the thumbnail say “much fast” do you lick the windows before filming

• 
  @jdjames997Ай бұрын

  This is a great video, nice job. Your Fox lift is fantastic, watched your install video, if I was going to redo my lift, I’d get the same stuff you put on- coilovers and all. Nothing like a little peer pressure to encourage guys to take their $70k-$90k rigs and damage them on a trail. I think your truck is awesome, but rock crawling is probably not its strong suit. I would like to get a tent for a rack on my Tundra crewmax, by i won’t be doing any serious rock crawling, i just want to go to some remote areas and camp. I had a Jeep Rubicon, I think rock crawling is boring, been there, done that, I don’t get the appeal, but I can see why some like it if you have a dedicated rig. Most of the crawl rigs I see are just set up for that, and they don’t care if they damage them because they’re older vehicles to begin with

• 
  @TommyLinebargerАй бұрын

  Yeah was just to experience it and see what the truck is capable of. Won’t be attempting those crazy trails again

• 
  @roymohr7599Ай бұрын

  what size tires were you running?

• 
  @TommyLinebargerАй бұрын

  35x12.5x17

• 
  @AdventureSquadOverlandАй бұрын

  Let’s gooooo, great video!

• 
  @lavio67Ай бұрын

  Buddy ,my take, you should have been better advised. You have terrible approach/ depart angle with the stock bumper. Off road bumpers / 37" tires and at least a mid travel suspension are in order for you to do some legit off road terrain without constantly worrying that you are smashing your truck. I'm driving a 2017 Tundra, I know how it is with the long frame.

• 
  @PwnulolumadАй бұрын

  I wish you had done a better comparison between ported and original blower

• 
  @JordanMcLeod-jl5rhАй бұрын

  Or just remove your air filter & put a mesh screen in place?

• 
  @eugeniocruz3148Ай бұрын

  you truck looks great ..i do have a question what is your total height from the ground to the top of the shark antenna.. i want to lift it but want to keep it in the garage. thanks in advance

• 
  @TommyLinebargerАй бұрын

  It’s about 7’ 1”

• 
  @eugeniocruz3148Ай бұрын

  @@TommyLinebarger thank you

• 
  @wadeschritter6503Ай бұрын

  I bought a 2022 Tundra with this kit installed, but it wasn't ever wired up. The main wiring harness was missing and the LED bar was full of water. I emailed Rave to see about getting a new wiring harness but they were no help. I removed the light bar and found a cheap set of marker lights on ebay with the right wiring harness to get the installed rave marker lights to work.

• 
  @TommyLinebargerАй бұрын

  Shoot, sorry to hear about your experience.

• 
  @ScallwagIncАй бұрын

  ECS Hardware Link 😂

• 
  @214Paul2 ай бұрын

  What are the two silver stems at the bottom my stock one didn’t have those ?

• 
  @aubreyhinkson76832 ай бұрын

  I did the same top five items with the change from an OEM plastic expansion coolant tank to an aluminum Moroso.

• 
  @sbrozyna2 ай бұрын

  Which rear spring height and rate did you go with? I thought you mentioned it in the video but couldn’t find it

• 
  @TommyLinebarger2 ай бұрын

  Hey I went with a 200 pound springs from Dobinson. I probably should’ve gone with the 100 though

• 
  @switzhussane32532 ай бұрын

  And what’s that pink thing called connecting the pink and yellow switch button

• 
  @switzhussane32532 ай бұрын

  Whsy do you use your aux beam for? I got one I just don’t think I’m ganna get anymore lights Im thinking why hook it up if im not ganna use it

• 
  @Mvgical2 ай бұрын

  Brother thanks for the advice, but I'm tryna learn how to take apart a subaru not hear a cold start xD

• 
  @matthewpieffer2 ай бұрын

  @teamoildrop

• 
  @austinratchford95822 ай бұрын

  Great video! Used this weekend to put in my TRD Grill. Question: I have 2 OEM switches (TRD Light Bar & AUXBEAM PODs) and I only have one spare port wire. Can I tap both yellow wires (Switch lighting) into the single spare tan cable?

• 
  @TommyLinebarger2 ай бұрын

  I would avoid overloading the signal wire. Might be a good time to invest in a controller of some sort. That way everything is nicely wired and not drawing too much. Not that it can’t be done, but better to be on the safe side.

• 
  @aserrano83182 ай бұрын

  I did this today. Used the blueprint from this video for a short bed gen 3 taco. Worked really well. I went with 5/8 plywood. There were a few ends that needed to be fit for the bed. After that it was a tight and clean fit. Cost me 160 bucks with today’s prices. I did buy 3M adhesive spray to fit it all tighter. Overall very happy with it. No wobbles or creaks. Thanks for the inspiration.

• 
  @TommyLinebarger2 ай бұрын

  Glad to hear it worked out well!

• 
  @diegoramos51092 ай бұрын

  Hey man where did you order the wrap ? And the spray can for the door handles

• 
  @TommyLinebarger2 ай бұрын

  Spray can from a local paint shop. Wrap from Amazon.

• 
  @kenschoon28692 ай бұрын

  Thanks for doing a. Video on it.

• 
  @myloalbano32982 ай бұрын

  Where did you buy the black s4 logo? It looks sick!

• 
  @zhnnofficial46592 ай бұрын

  hello, we have a carplay product that fits on your 2022 Toyota Tundra, just wondering if you are interested in testing it?

• 
  @TommyLinebarger2 ай бұрын

  Already have CarPlay. Thank you though

• 
  @zhnnofficial46592 ай бұрын

  @@TommyLinebarger ok, do you want to get more features?

• 
  @mdgeist4722 ай бұрын

  Aluminum skids dont save that much weight over the same steel ones...60 lbs vs 90 lbs. The aluminum ones are also disposable, meaning that they are not reusable after damage. The steel ones could be hammered back to shape.

• 
  @Aces12112 ай бұрын

  What rims are those ?

• 
  @shortythefrenchie2 ай бұрын

  Great job, man!

• 
  @2AToday3 ай бұрын

  I LOVE your videos. But the music in this one made me stop watching after the first few seconds. Please consider not using rap/hip hop or whatever this mumbling black dude stuff is.

• 
  @GirdlerFamilyOverland3 ай бұрын

  Great detailed walk through of the grill swap! I'll reference this when I get to mine. Thanks!

• 
  @TommyLinebarger3 ай бұрын

  Thank you

• 
  @2AToday3 ай бұрын

  The music makes this unwatchable.

• 
  @HCD4883 ай бұрын

  Does the B8 has Aux for Phone music or is there no possible way to listen to your music on your phone without a gongle ?

• 
  @barrettgreen85953 ай бұрын

  Why not buy the camper version?

• 
  @TommyLinebarger3 ай бұрын

  I couldn’t justify the $4k difference

• 
  @_iamghost3 ай бұрын

  Wondering if this setup would clear a stock trd pro? The pro has a lift from factory up front.

• 
  @TommyLinebarger3 ай бұрын

  Yeah it will clear. You might see rubbing on the body mount though

• 
  @nastysoda92123 ай бұрын

  this is a mental illness

• 
  @killabandit3 ай бұрын

  You should have mounted the fuse assembly under the hood so its easy to connect any lights to it instead of running all their power wires inside. Just run the main power wire from the battery to the hood.

• 
  @TommyLinebarger3 ай бұрын

  For rear lighting I would have to run the full length as well. I chose to put it in the cab to take it out of the elements.

• 
  @rollylove3 ай бұрын

  How do you like it. I’m installing mine tomorrow

• 
  @TommyLinebarger3 ай бұрын

  It’s awesome! Glad I waited

• 
  @fishwoodcarving60213 ай бұрын

  Hey Tommy, How is the ride? I have icons and they are super stiff. Thanks

• 
  @TommyLinebarger3 ай бұрын

  They're extremely comfortable and responsive to bumps and obstacles.

• 
  @sbrozyna2 ай бұрын

  What dsc settings are you running? I drove mine around for a week and the ride seemed okay but finally adjusted them and found both high and low speed were wide open at softest setting. Bumped it up three clicks on both and still testing it out. Haven’t gone off road, 95% will be on road without much cargo myself

• 
  @TommyLinebarger2 ай бұрын

  I think I’m running around the same. 3 clicks on high speed and I think 4 on low speed

• 
  @Ac227683 ай бұрын

  Fitment looks like garbage on your car.

• 
  @TommyLinebarger3 ай бұрын

  Thank you

• 
  @babylane60283 ай бұрын

  try remove it altogether. it feels much better imo

• 
  @WillPagephotography3 ай бұрын

  Whats your MPG with this setup?

• 
  @TommyLinebarger3 ай бұрын

  13-15

• 
  @beckhamzhang48053 ай бұрын

  Are the solar panel and batteries weather resistant? Did you buy this cooler from Costco? There are 2 batteries in the package? Will consider to buy it.

• 
  @macsgarage84103 ай бұрын

  Let me know how you like.the fox 2.5 dscs, considering Dobinsons MMR.

• 
  @TommyLinebarger2 ай бұрын

  So far they’re amazing!

• 
  @mikeh84983 ай бұрын

  Do you hear it rattling when you're driving?

• 
  @vinhdoan36294 ай бұрын

  How many miles do you have on your 2022 tundra?

• 
  @TommyLinebarger4 ай бұрын

  11k miles