I have an 09 and the code is NOT in that panel...just sayin
@stevenzeoli614711 сағат бұрын
Great video, clear and concise. Any thoughts on this? I have the new actuator motor ready to install. (I didn’t need the gear.) As soon as I turn on the ignition it starts to move, and continues after I shut it down. Anyone know why?
@tinkyoct1416 сағат бұрын
How long does it last before they go yellow again?
@hongfeiwang692916 сағат бұрын
not bad, better than the French car which will make you crazy..
@joeoak7090Күн бұрын
STILL CANT FIND THE USB PORT ????
@MartinsUsedCarsCollectiblesLLCКүн бұрын
AUX port… 2005 to 2009 did not have USB ports.
@rainysunday6186Күн бұрын
Dumbest idea ever. Just another reason to not buy a Ford. Their engineers are morons.
@danbell3378Күн бұрын
The previous owner of my car tried to tint the rear windows and did a shitty job. I got an estimate at a window tint shop that told me he would have to charge an additional $60 to remove the old tint. Thanks so much for your video. You saved me $60!
@privatename8888Күн бұрын
Great video FYI for your viewers I have a 2018 and it's the same removal and install. Also to acknowledge he is right the arrows go facing down because the blower is at the bottom, if the blower were on top the arrows would face up. I just left a shop for an ac diagnostic and they of course tried to sell me this filter but I already had one in the trunk. Well they put the original back in upside down and they also took the glove box off without unhooking plastic strut that you are missing and it became two parts smh good thing I was able to put it back together. It's basically a plunger with a female and male end and just like the inside of a syringe it has a rubber seal that holds enough air to make it act as a strut keeping the glove box from slamming down and cracking or breaking the part on the dash that keeps the glove box from opening all the way to the floor. The little strut has to o rings that keep the male and female pieces from coming apart when it's extended all the way but with a mechanic that doesn't know what he or she is doing and doesn't unhook it before removing the entire box with enough pull that little plastic strut mechanism will come apart.
@CarltonLewisКүн бұрын
Thank you! This was helpful!
@MartinsUsedCarsCollectiblesLLCКүн бұрын
Glad it was helpful!
@wl62792 күн бұрын
lol I think it would have made more sense to just replace the shifter 😃 good video though
@coltharwood4942 күн бұрын
Thanks for the video. You have saved me more than $130; the local Jeep dealer wanted $150 to do the repair on my 2012 Jeep Grand Cherokee.
@Oldskatedude2 күн бұрын
Thank you for this easy fix my ford dealership told me they would install this for $485.00 including labor... Absurd....
@mattsaysitscool13963 күн бұрын
I want to swap out my 07 Shaker 500 radio for an OEM Ford navigation/touch screen radio from the same generation (like the Shelby’s have) would I run into any issues, or would it install just as easily?
@MartinsUsedCarsCollectiblesLLCКүн бұрын
We have not performed that kind of swap. Good luck! 👍🏻
@theresalove98984 күн бұрын
I swear they didn't make anything easy to fix/ replace on this Mustang. 😂😂 Thank you for the video
@ronbunker57784 күн бұрын
I just bought 1985 and I had no idea how to do this. Thank you!
@bkvike4 күн бұрын
Had that exact car in high school. Great on road trips, easily Slept 6. What did you get for it? Shame the original steering wheel is gone, very unique.
@someguy83834 күн бұрын
I have ford Taurus 2021. Engine cooling fan keeps on running
@elizbethmustin79654 күн бұрын
Is there a particular brand to purchase for a code reader that's accurate in diagnosing issues in explorer? Thank you
@MartinsUsedCarsCollectiblesLLC3 күн бұрын
We use the INNOVA 5210. It's a good basic code reader scanner diagnostic tool - Read/Erase ABS Codes, Live Data, Battery/Charging System Test, iOS and Android. Here is a link on Amazon: amzn.to/4eNBWv2
@jacobmathes86815 күн бұрын
Nice & easy! Thanks for the simple but descriptive video sir.
@litriumfi39646 күн бұрын
Did this today but my heater won’t blow hot air and I tried bleeding it this way. Do you recommend anything?
@wesharding26636 күн бұрын
Absolutely fantastic! Thank you!
@craigstuckey7 күн бұрын
I have too say you really are a life saver with this video because I was having issues and just could not figure it out and now this is what I have to do every time when it won’t start and it works so thank you for this video!!
@danitajminer32797 күн бұрын
Take the bumper off to change headlamps. 😬 This is why all the older Mustangs have oxidized lenses. 😂mine included.
@topherseiler34817 күн бұрын
Great video, simple, easy and instructional.
@Dalhax7 күн бұрын
Hello, at 0:48, you disconnected the clip and accidentally touched a black molded hose with 2 hose clamps on each end. It's also a component of the cooling system. I would really like to know the part number of that or the size to find a replacement for my car. It's a short heater hose piece (about 3 inches)
@don76807 күн бұрын
How do you conform the valve is bad before replacing? Disconnect the hose and cable and feel if there is a vacuum still when not powered?
@MartinsUsedCarsCollectiblesLLC3 күн бұрын
Scanner Diagnostic Tool (aka: a code reader) Amazon link: amzn.to/4eNBWv2
@rosemarythyme63517 күн бұрын
Thanks for the helpful tips! I just bought a 2007 Mustang Coupe w/Pony Pkg.
@AldairVazquez-ue1ud8 күн бұрын
"Thank you for the help. I was very desperate about this mistake."
@efrainvasquez50108 күн бұрын
What happen if we eliminate the ruber drains?
@efrainvasquez50108 күн бұрын
Thank you again Sir. Regards from Mexico.
@efrainvasquez50108 күн бұрын
Thank you very much for your video, now I have learned something new. Regards from Mexico.
@jaimemungia62728 күн бұрын
Can you please share link where I can purchase the correct head light lamb. Thank you
@MartinsUsedCarsCollectiblesLLC8 күн бұрын
We found ours (used) on eBay.
@jaimemungia62727 күн бұрын
They’re expensive for a HID Xenon lamb.
@sherrywilliams24458 күн бұрын
Happy Birthday Tom! Hope it's great and wonderful one!!!
@douglasrobinson35938 күн бұрын
Seat recline lever has a snap ring, had to remove that first before taken off lever
@jamieking21138 күн бұрын
I’m literally going this right now with my Nissan Murano SL the seat will lean back and not back up. Everyone kept telling me to go get a brand new seat or it had to be the chair motor
@philippecensier8 күн бұрын
J'ai eu ce problème sur mon grand Cherokee 2011 ainsi que sur un Dodge Nitro 2009 , MERCI pour cette vidéo , c'est PARFAIT
@rebeccafaulkner44109 күн бұрын
You are the best!
@Heavy69Metal9 күн бұрын
Got this CODE. 2006 Mustang 4.0L V6 EVAP System Leak Detected Gross Leak/No Flow P0456
@valdomunoz19399 күн бұрын
Do you know where the fog light relay is?
@valdomunoz19399 күн бұрын
Sabe dónde está el relay de los faros de niebla ?
@chrisadams78209 күн бұрын
Great video! Just picked one up, and your video is right on time.
@amandabrown34929 күн бұрын
Followed the video step by step and finished the job in an hour 👍 thank you so much!
@MartinsUsedCarsCollectiblesLLC9 күн бұрын
So glad it helped you!
@don76809 күн бұрын
If the cowl is quite full of water, you can hear it slosh back and forth on the passenger side when steering back and forth quickly. Pull the passenger side drain tube out the bottom and tons of water (and possibly all your debris) will drain out. The passenger side appears to be worse generally than the drivers side, but pull both and clean inside the rubber drain. If you feel around inside the hole (in the cowl) after the drain tube is removed and it feels clean you may not need to remove the top grate. If you remove the top cowl grate, make sure you get a cabin air filter first as that's a perfect time to do both. I'd recommend purchasing new Cowl Drain Tubes if the old ones are in rough shape. They direct the water and probably prevent some fumes from entering the cabin, especially on the passenger side which contains the fan.
@Megan-nm9lz10 күн бұрын
The realest❤
@TB-md9lm10 күн бұрын
Appreciate you. Wife’s car was tricky but you made me look like a pro 😂
@noeminavarro610210 күн бұрын
Where did you purchase the twilight assembly from?
@MartinsUsedCarsCollectiblesLLC10 күн бұрын
We purchased ours from amazon. Here's a link to a 2013-2016 passenger tail light: amzn.to/3XIj3nb Here's a link to a 2013-2016 driver tail light: amzn.to/3XF3Ym6 Here's a link to a 2017-2020 passenger tail light: amzn.to/3zdcRJv Here's a link to a 2017-2020 driver tail light: amzn.to/3RDpaoM
@KAQueen6311 күн бұрын
Thanks good to know very helpful..
@melissacheatham675111 күн бұрын
Thank you very much for the step by step instructions. It was helpful. (That bottom left 7mm was hard to find. I had to lay on my back on the floor and use a flashlight.) Now I have a new air filter installed. Thank you again.
@chuckgarcia637711 күн бұрын
Great job explanation maybe a little less caffeine though LOL
@brianpreston291111 күн бұрын
I'm having an issue with the fuel gauge sticking. But no code. Is it the sending unit. 2014 mustang gt
Пікірлер
I have an 09 and the code is NOT in that panel...just sayin
Great video, clear and concise. Any thoughts on this? I have the new actuator motor ready to install. (I didn’t need the gear.) As soon as I turn on the ignition it starts to move, and continues after I shut it down. Anyone know why?
How long does it last before they go yellow again?
not bad, better than the French car which will make you crazy..
STILL CANT FIND THE USB PORT ????
AUX port… 2005 to 2009 did not have USB ports.
Dumbest idea ever. Just another reason to not buy a Ford. Their engineers are morons.
The previous owner of my car tried to tint the rear windows and did a shitty job. I got an estimate at a window tint shop that told me he would have to charge an additional $60 to remove the old tint. Thanks so much for your video. You saved me $60!
Great video FYI for your viewers I have a 2018 and it's the same removal and install. Also to acknowledge he is right the arrows go facing down because the blower is at the bottom, if the blower were on top the arrows would face up. I just left a shop for an ac diagnostic and they of course tried to sell me this filter but I already had one in the trunk. Well they put the original back in upside down and they also took the glove box off without unhooking plastic strut that you are missing and it became two parts smh good thing I was able to put it back together. It's basically a plunger with a female and male end and just like the inside of a syringe it has a rubber seal that holds enough air to make it act as a strut keeping the glove box from slamming down and cracking or breaking the part on the dash that keeps the glove box from opening all the way to the floor. The little strut has to o rings that keep the male and female pieces from coming apart when it's extended all the way but with a mechanic that doesn't know what he or she is doing and doesn't unhook it before removing the entire box with enough pull that little plastic strut mechanism will come apart.
Thank you! This was helpful!
Glad it was helpful!
lol I think it would have made more sense to just replace the shifter 😃 good video though
Thanks for the video. You have saved me more than $130; the local Jeep dealer wanted $150 to do the repair on my 2012 Jeep Grand Cherokee.
Thank you for this easy fix my ford dealership told me they would install this for $485.00 including labor... Absurd....
I want to swap out my 07 Shaker 500 radio for an OEM Ford navigation/touch screen radio from the same generation (like the Shelby’s have) would I run into any issues, or would it install just as easily?
We have not performed that kind of swap. Good luck! 👍🏻
I swear they didn't make anything easy to fix/ replace on this Mustang. 😂😂 Thank you for the video
I just bought 1985 and I had no idea how to do this. Thank you!
Had that exact car in high school. Great on road trips, easily Slept 6. What did you get for it? Shame the original steering wheel is gone, very unique.
I have ford Taurus 2021. Engine cooling fan keeps on running
Is there a particular brand to purchase for a code reader that's accurate in diagnosing issues in explorer? Thank you
We use the INNOVA 5210. It's a good basic code reader scanner diagnostic tool - Read/Erase ABS Codes, Live Data, Battery/Charging System Test, iOS and Android. Here is a link on Amazon: amzn.to/4eNBWv2
Nice & easy! Thanks for the simple but descriptive video sir.
Did this today but my heater won’t blow hot air and I tried bleeding it this way. Do you recommend anything?
Absolutely fantastic! Thank you!
I have too say you really are a life saver with this video because I was having issues and just could not figure it out and now this is what I have to do every time when it won’t start and it works so thank you for this video!!
Take the bumper off to change headlamps. 😬 This is why all the older Mustangs have oxidized lenses. 😂mine included.
Great video, simple, easy and instructional.
Hello, at 0:48, you disconnected the clip and accidentally touched a black molded hose with 2 hose clamps on each end. It's also a component of the cooling system. I would really like to know the part number of that or the size to find a replacement for my car. It's a short heater hose piece (about 3 inches)
How do you conform the valve is bad before replacing? Disconnect the hose and cable and feel if there is a vacuum still when not powered?
Scanner Diagnostic Tool (aka: a code reader) Amazon link: amzn.to/4eNBWv2
Thanks for the helpful tips! I just bought a 2007 Mustang Coupe w/Pony Pkg.
"Thank you for the help. I was very desperate about this mistake."
What happen if we eliminate the ruber drains?
Thank you again Sir. Regards from Mexico.
Thank you very much for your video, now I have learned something new. Regards from Mexico.
Can you please share link where I can purchase the correct head light lamb. Thank you
We found ours (used) on eBay.
They’re expensive for a HID Xenon lamb.
Happy Birthday Tom! Hope it's great and wonderful one!!!
Seat recline lever has a snap ring, had to remove that first before taken off lever
I’m literally going this right now with my Nissan Murano SL the seat will lean back and not back up. Everyone kept telling me to go get a brand new seat or it had to be the chair motor
J'ai eu ce problème sur mon grand Cherokee 2011 ainsi que sur un Dodge Nitro 2009 , MERCI pour cette vidéo , c'est PARFAIT
You are the best!
Got this CODE. 2006 Mustang 4.0L V6 EVAP System Leak Detected Gross Leak/No Flow P0456
Do you know where the fog light relay is?
Sabe dónde está el relay de los faros de niebla ?
Great video! Just picked one up, and your video is right on time.
Followed the video step by step and finished the job in an hour 👍 thank you so much!
So glad it helped you!
If the cowl is quite full of water, you can hear it slosh back and forth on the passenger side when steering back and forth quickly. Pull the passenger side drain tube out the bottom and tons of water (and possibly all your debris) will drain out. The passenger side appears to be worse generally than the drivers side, but pull both and clean inside the rubber drain. If you feel around inside the hole (in the cowl) after the drain tube is removed and it feels clean you may not need to remove the top grate. If you remove the top cowl grate, make sure you get a cabin air filter first as that's a perfect time to do both. I'd recommend purchasing new Cowl Drain Tubes if the old ones are in rough shape. They direct the water and probably prevent some fumes from entering the cabin, especially on the passenger side which contains the fan.
The realest❤
Appreciate you. Wife’s car was tricky but you made me look like a pro 😂
Where did you purchase the twilight assembly from?
We purchased ours from amazon. Here's a link to a 2013-2016 passenger tail light: amzn.to/3XIj3nb Here's a link to a 2013-2016 driver tail light: amzn.to/3XF3Ym6 Here's a link to a 2017-2020 passenger tail light: amzn.to/3zdcRJv Here's a link to a 2017-2020 driver tail light: amzn.to/3RDpaoM
Thanks good to know very helpful..
Thank you very much for the step by step instructions. It was helpful. (That bottom left 7mm was hard to find. I had to lay on my back on the floor and use a flashlight.) Now I have a new air filter installed. Thank you again.
Great job explanation maybe a little less caffeine though LOL
I'm having an issue with the fuel gauge sticking. But no code. Is it the sending unit. 2014 mustang gt