Пікірлер

• 
  @prologic24576 күн бұрын

  👍✌️

• 
  @SmellyCatCreations6 күн бұрын

  Thank you :)

• 
  @microreniassance292916 күн бұрын

  I just bought this unit and was pretty confused. Your video helped me get the temp set point I needed. Many thanks.

• 
  @SmellyCatCreations16 күн бұрын

  Your more than welcome. I figured try save some people the same headache

• 
  @JDD_Tech_MODS18 күн бұрын

  How low can you set a constant water temp?

• 
  @SmellyCatCreations18 күн бұрын

  I just have mine set to a constant 20 degrees but you can go lower certainly like 18 degrees. The lower you go the more power if will use though to try and maintain that

• 
  @JDD_Tech_MODS18 күн бұрын

  @@SmellyCatCreations Thank you for the quick reply!!

• 
  @SmellyCatCreations18 күн бұрын

  Your welcome 🙏🏻

• 
  @ThePeterDislikeShow25 күн бұрын

  Does patination oil work on bismuth?

• 
  @SmellyCatCreations25 күн бұрын

  @@ThePeterDislikeShow I have no idea if I'm honest like I say never worked with it. You can only but try a small bit and see. I'm sure it would have some kind of effect

• 
  @ThePeterDislikeShow25 күн бұрын

  @@SmellyCatCreations You should try bismuth. It has many of the properties of lead like low-melting point but way less toxic.

• 
  @SmellyCatCreations25 күн бұрын

  @@ThePeterDislikeShow where do you get it from?

• 
  @ThePeterDislikeShow25 күн бұрын

  @@SmellyCatCreations Bolton Metals. You can buy 50 pounds for $400.

• 
  @SmellyCatCreations25 күн бұрын

  @@ThePeterDislikeShow I will check the material out thank you

• 
  @ThePeterDislikeShow25 күн бұрын

  Does the lead alloy into the brass? I've been hesitating about using metal molds for that reason.

• 
  @SmellyCatCreations25 күн бұрын

  @ThePeterDislikeShow no the melting points of the 2 metals are far too different so have no issues

• 
  @ThePeterDislikeShow25 күн бұрын

  @@SmellyCatCreations The reason for the concern is I know mercury sometimes messes with other metals, so I figured this would be similar. I work with bismuth by the way, which is more sensitive to being contaminated.

• 
  @SmellyCatCreations25 күн бұрын

  @ThePeterDislikeShow I have certainly never worked with bismuth. What do you use that to make?

• 
  @mrjohnnylongsleeves4128Ай бұрын

  Well done Sir! Just got mine and your video really made things clear for me! As much as I love the Worx product line I have always found their manuals woefully lacking in detail. Thank you very much!

• 
  @SmellyCatCreationsАй бұрын

  @@mrjohnnylongsleeves4128 your more than welcome. Thanks so much for the feedback. Will do a video soon on their hydroshot jetwash and leaf blower as been using them a while to save me time.

• 
  @CreatorJJBАй бұрын

  Dont think it has enough holes

• 
  @CreatorJJBАй бұрын

  Nice fagin gloves

• 
  @CreatorJJBАй бұрын

  Hope you got a fire extinguisher

• 
  @CreatorJJBАй бұрын

  Woah Stella!

• 
  @simonsmith7963Ай бұрын

  Good video. You can improve your cable by adding an inline table lamp switch. Then you can avoid sparking by getting your wires connected before turning the switch on. Also you can crimp automotive spade connectors on the cable ends. These work well with batteries that have the clip style connector.

• 
  @SmellyCatCreationsАй бұрын

  Cheers Simon, great tips thank you. I don't generally have to do this very often so it was just a very quick made-up cable but I think if I did it more often I would certainly have a nicer cable and the switch is a great option to add.

• 
  @freshbeatz7403Ай бұрын

  How did you fix?

• 
  @SmellyCatCreationsАй бұрын

  Cleaned and unblocked the nozzle, along with a cold pull

• 
  @neilgage427Ай бұрын

  🔔 ⚡

• 
  @SmellyCatCreationsАй бұрын

  🤘🏻🤘🏻

• 
  @focusfocus8966Ай бұрын

  Fantastic explanation. You are the 1st guy I have seen fixing the hose directly from the tap. Simply superb 😊.

• 
  @SmellyCatCreationsАй бұрын

  Aww thanks so much. I'm glad you found the video useful 😊

• 
  @focusfocus8966Ай бұрын

  Just a quick question, this video you posted a year back, still do you use this equipment. Does it still hold good. Please confirm.

• 
  @SmellyCatCreationsАй бұрын

  I still have the pressure washer and do still use it, yes. I am about to try out the worx hydroshot, though, as I have alot more of their batteries so I may eventually move over to using one of them.

• 
  @focusfocus8966Ай бұрын

  @@SmellyCatCreations that's great, will wait for your worx review as well. Appreciate your reply. Thanks.

• 
  @SmellyCatCreationsАй бұрын

  @@focusfocus8966 your welcome I will get a video made and uploaded

• 
  @rewildyourmind4334Ай бұрын

  do you sell these free diving weights?

• 
  @SmellyCatCreationsАй бұрын

  Hi there, I make rhe custom moulds, but I can also cast them in-house

• 
  @rewildyourmind4334Ай бұрын

  @@SmellyCatCreations Hey , iv sent you a email about them

• 
  @trevorrichardson523Ай бұрын

  Great advice and worked perfectly for me.

• 
  @SmellyCatCreationsАй бұрын

  Your more than welcome. Really pleased it helped

• 
  @joebeeston19952 ай бұрын

  Just tried this on my flashing red Ferrex battery but no dice unfortunately...will try opening it up next!

• 
  @SmellyCatCreations2 ай бұрын

  Ahh shame sometimes it's a little too far gone, that's not to say it still can't be saved of course

• 
  @joebeeston19952 ай бұрын

  @@SmellyCatCreations this is the thing, its not exhibiting symptoms of a flat battery, the status light illuminates and it still powers my tools, it just won't charge on the charger.

• 
  @SmellyCatCreations2 ай бұрын

  @joebeeston1995 might be worth throwing a multimeter onto the charger see what it's putting out

• 
  @rogerstrom11862 ай бұрын

  WELL ORGANIZED SHOP.

• 
  @SmellyCatCreations2 ай бұрын

  It's in the middle of a move around 😉

• 
  @callummondey47612 ай бұрын

  ❤❤❤

• 
  @80ivannoel2 ай бұрын

  I would like to ask how to unlock the trigger, i'm having trouble with mine.😥Do you push or pull the round knob? thank you.

• 
  @SmellyCatCreations2 ай бұрын

  Hammer! Not sure on that one to be honest other than taking her apart and having a look I would assume its just a little stuck

• 
  @80ivannoel2 ай бұрын

  @@SmellyCatCreations Thank you very much!

• 
  @SmellyCatCreations2 ай бұрын

  @@80ivannoel you should just push the trigger lock to the right and then be able to pull the trigger back. So thumb to move the lock while pulling the trigger in

• 
  @80ivannoel2 ай бұрын

  @@SmellyCatCreations ok got it.. Thanks a lot! Appreciate, you taking the time to answer my question.🙏

• 
  @SmellyCatCreations2 ай бұрын

  @80ivannoel your more than welcome. I'm happy to help.

• 
  @davidwarnes61912 ай бұрын

  Thanks very much. It worked fine for my Gtech hedge trimmer using exactly the same batteries as in your video. I had to buy a new battery from Gtech but at least I now have two working so my hedges will look a lot better. The downside is that I won't get as many breaks from work while the battery is being charged!

• 
  @SmellyCatCreations2 ай бұрын

  Your more than welcome, the Gtech batteries don't last too long per charge though do they. Far easier than running a long power cord though.

• 
  @edwardkent68312 ай бұрын

  Great video !!! Did you use the saw to trim your fingernails?😂✌️👍

• 
  @SmellyCatCreations2 ай бұрын

  Thanks, of course I did, multi use tools and all that 😉

• 
  @Velocity04282 ай бұрын

  What does high and low mean? High and low speed or high and low torque?

• 
  @SmellyCatCreations2 ай бұрын

  This should switch between 2 speeds gears

• 
  @Velocity04282 ай бұрын

  @@SmellyCatCreations So it's just the speed that changes, not the torque?

• 
  @SmellyCatCreations2 ай бұрын

  @@Velocity0428 I believe so

• 
  @nickdavies19772 ай бұрын

  Same Aldi/Ferrex battery with same problem. Now fixed thanks to your guide. Cheers!

• 
  @SmellyCatCreations2 ай бұрын

  You are more than welcome. Thanks very much for watching 😊

• 
  @sumitsaxena100013 ай бұрын

  Waste of money 💰 product Dewalt water pressure 👌

• 
  @SmellyCatCreations3 ай бұрын

  I think the issue is not everyone can afford the dewalt brand

• 
  @playdeaths3 ай бұрын

  Noice and tidy ❤

• 
  @SmellyCatCreations3 ай бұрын

  Thank you 😊

• 
  @nexan213 ай бұрын

  cool vid, you need to include F & S , cutters used etc 👍

• 
  @SmellyCatCreations3 ай бұрын

  A tradesman, never gives away all his secrets 🤣 put myself out of a job.

• 
  @GilbertIII-ke1di3 ай бұрын

  Your Pla thought it was tpu

• 
  @SmellyCatCreations3 ай бұрын

  No, just some badly under extruded pla, I need to print some more tpu such a cool material 😎

• 
  @CliveLowe3 ай бұрын

  Thanks this worked for me, I didn't have a spare Gtech battery so I used a Makita 18v Li battery and they are marked up + and - Cheers

• 
  @SmellyCatCreations3 ай бұрын

  Really pleased it saved another battery from being replaced 😀 thanks for watching and commenting

• 
  @dlmcbm3 ай бұрын

  Man thank you so much for making this video. I would have never figured this out from the manual. FYI I am on the Omtech silver that has the same control panel.

• 
  @SmellyCatCreations3 ай бұрын

  No problem at all, I couldn't find anything on this at all, and like you say, the manual doesn't help. I'm really pleased to hear it helped you. 😀 it's a good little controller I changed it all over when I pretty much rebuilt the laser lol

• 
  @tribble103 ай бұрын

  This worked for me, thank you very much! I have the exact same Aldi Active Energy battery & charger and the battery was showing 3x amber lights on the test button but still refused to charge. I only have 1 of the Aldi batteries however I have lots of the Parkside 20V Lidl batteries which I used to jump start the Aldi Battery. I jump charged both the B1 and B2 sides for around 4-5 mins each side and the Aldi Battery now charges fully!

• 
  @SmellyCatCreations3 ай бұрын

  Awesome, I am really pleased to hear this helped you out and allowed you to get the batteries working again :) thanks for checking out the video and please do share with anyone else it may help.

• 
  @stuartbarrett97053 ай бұрын

  Ferret battery’s year in the dud box just fixed thank you !!!

• 
  @SmellyCatCreations3 ай бұрын

  Your more than welcome, glad to hear it was helpful. Badly need to get some more content out. Thanks for watching 😊

• 
  @JustinGibson-sj1pc3 ай бұрын

  Do you sell them?

• 
  @SmellyCatCreations3 ай бұрын

  Hi Justin, I haven't listed them anywhere, but I had planned to. So if you want one, just drop me a message on Instagram or through my website and I can sort that out for you.

• 
  @oksle81324 ай бұрын

  dude audio is bad and you speak too much but thx anyway

• 
  @SmellyCatCreations4 ай бұрын

  Lol thanks dude 😄

• 
  @karenbrown33434 ай бұрын

  Great video for an older woman trying to put together her first chain saw. Thanks very much!!

• 
  @SmellyCatCreations4 ай бұрын

  You're more than welcome, and thanks very much for your comment 😀

• 
  @chipashvilinino79705 ай бұрын

  is the FERREX multitool Carbonless engine ?

• 
  @SmellyCatCreations5 ай бұрын

  I don't think the ones with Blue trigger switches are but they have done a range with light grey triggers that are brushless motors "carbonless"

• 
  @craighayes33165 ай бұрын

  Hello, Could ask a stupid question. I'm wanting tip my toes into the air compressor world. I wondered, I've got some skirting boards to fit in the house. 18mm skirting ( pine) which will be attached to a wall in a traditional UK house, so plaster board and breeze block. In your opinion, would this and it connected compressor be up to the job, just hold whilst the 1900 litre of no nails go off. Cheers.

• 
  @SmellyCatCreations5 ай бұрын

  I would personally say one of these would struggle with that, to be honest, as 18mm skirting alone will need a high driving force. If you check out my video for the cordless worx nailer, to be honest, these days, that's my go-to nailer. It has much greater control over deph penetration, and I use it a lot for stapling u shape staples into panels

• 
  @craighayes33165 ай бұрын

  @SmellyCatCreations great stuff. I will watch that review. Thank you for the quick reply.

• 
  @SmellyCatCreations5 ай бұрын

  @craighayes3316 your welcome and thanks for watching 👀

• 
  @derekhawley96605 ай бұрын

  VCarve Desktop = 28 months of CarveCo Maker. I hate subscription software ... they just dangle you on a string. I'm going to buy VCarve Desktop and if I sell my CNC, the software will go with it (hopefully getting a bit of the cost back). Plus, there is nothing to stop CarveCo putting up their subscription fee. I do agree that the VCarve interface is very old fashioned, but I can live with that. Love the beard!

• 
  @SmellyCatCreations5 ай бұрын

  Haha cheers mate, you do raise a very good point on the subscription side of things. Especially more so lately as everything just seems to be going through the roof price wise. Perhaps good advice would be start on vectrics lowest package until you find it doesn't do something you need then pay the upgrade cost. I moved to affinity designer for artwork to avoid Adobe clouds monthly costs

• 
  @RobertNeaguOfficial5 ай бұрын

  I've just tried it, but still doesn't want to charge it. Even if it got almost full 3 light battery life indicator. What should I check next?

• 
  @SmellyCatCreations5 ай бұрын

  Is your charger still rejecting it?

• 
  @RobertNeaguOfficial5 ай бұрын

  @@SmellyCatCreations yeah

• 
  @SmellyCatCreations5 ай бұрын

  @RobertNeaguOfficial I would assume its most likely due to the cells not being equally balanced, and therefore, most budget Included won't load balance them and just reject charging for safety reasons. Options are to try it on a more advanced charger with balancing connection or open it up and separate and measure the voltage on each cell

• 
  @PoltergeistHC4L5 ай бұрын

  Thanx m9 i always used grandma s extra teath!

• 
  @SmellyCatCreations5 ай бұрын

  Ooh good choice that gives a super high shine finish ✨️

• 
  @MickeyD20125 ай бұрын

  What are they feeding you?!

• 
  @SmellyCatCreations5 ай бұрын

  Smelly food 😆

• 
  @omarjassar46505 ай бұрын

  And the Partridge and a pear tree 😅😅😅

• 
  @SmellyCatCreations5 ай бұрын

  I was all out of those 🤣

• 
  @omarjassar46505 ай бұрын

  @@SmellyCatCreations Darn it

• 
  @PhilsWorkshop19535 ай бұрын

  Nice vid nice tool for light work had a chuckle over the health and safety comments and thanks for your subscription

• 
  @SmellyCatCreations5 ай бұрын

  Your welcome, thanks for taking the time to watch my video 😊

• 
  @kevinwillis67075 ай бұрын

  Cheers for this, ive been looking for a guide on doing this👍

• 
  @SmellyCatCreations5 ай бұрын

  Your more than welcome, thanks for the feedback. If you have anything else you would like to see videos on just let me know

• 
  @junrall5 ай бұрын

  Just curious... this video is two years old... are you still using Carveco over Vectric?

• 
  @SmellyCatCreations5 ай бұрын

  Oh, how time flys. I'm using vectric at the moment, but I'm also in the middle of trying to move over to Fusion 360 for many of my jobs.

• 
  @kanebeatty80446 ай бұрын

  Where can you buy them stamps

• 
  @SmellyCatCreations6 ай бұрын

  Just drop me a message on social media or email me at [email protected] Be happy to sort one for you 😊

• 
  @vivek-13186 ай бұрын

  Awesome

• 
  @SmellyCatCreations6 ай бұрын

  Thank you 😊

• 
  @goldensaw84896 ай бұрын

  Can you make me a seal for burning wood?

• 
  @SmellyCatCreations6 ай бұрын

  I can indeed. If you pop me a message on social media or through my website I will be happy to help. Smellycatcreations.com

• 
  @WoodworkJourney6 ай бұрын

  Nice. I want a little mini forge/furnace so badly 😂

• 
  @SmellyCatCreations6 ай бұрын

  Thanks, they are not all that expensive really. I mean I started with a smaller one. For lead I actually started with a camping stove lol

• 
  @frankphair46756 ай бұрын

  That looks like something I would be interested in buying do you sell these branding irons still

• 
  @SmellyCatCreations6 ай бұрын

  Hi Frank I do indeed. To try and make life easier for people and quoting I have my most common products on my store. Shop.smellycatcreations.com Then take on all types of custom orders as well. Thanks for the comment 👍🏻 and any questions I would be happy to help.