Пікірлер

• 
  @SimplybeingR28 күн бұрын

  I have the white sublimation sticket paper and it is stuck to the sheet and I am not able to peel it off. I used the recommended heat setting as well as lowered heat settings for less time. The stickers will not come apart even after cooled. Any recommendations would be great - thanks

• 
  @sajinalex7607Ай бұрын

  Can I use this paper to make buttons without Mylars sheets?

• 
  @societycrumblesАй бұрын

  I use water decal paper to make decals for nails. I found that if I spray more than 2 coats, it becomes too thick to work with, but if I only do 2 coats, it bleeds. I don't know how to find a happy medium.

• 
  @andreaponder19402 ай бұрын

  Its not printing with my printer at all. Seems to be the thickness.

• 
  @puchianas943 ай бұрын

  how does it look from the other side?

• 
  @puchianas943 ай бұрын

  Is this paper a little traslucid? I need a paper a little bit more traslucid than bond

• 
  @corderoemc1484 ай бұрын

  THANK YOU!!! 🥰

• 
  @yearofthedragontarot55544 ай бұрын

  So it's 400 degrees for 20 seconds? it doesn't specify if you wait for it to cool or pull the transfer sheet asap? This could be a LOT better.

• 
  @mellissafox47474 ай бұрын

  There are hardly any printers that dont use pigment ink? My printer uses Pigment for the black and then the other type for the colours, but it still messes up the prints

• 
  @mellissafox47474 ай бұрын

  When printing with this paper my ink smears, and when I change the settings it drains the colour from my stickers???

• 
  @starlsma20004 ай бұрын

  does ur printer use pigment based ink or dye based ink

• 
  @tias89113 ай бұрын

  I found a tip that said put your settings on plain paper high quality & that worked no more smears

• 
  @varshithahs29075 ай бұрын

  Inkjet inl will not work?

• 
  @marlieyang83255 ай бұрын

  I need help because mine resulted in some white residue after heat press.

• 
  @koalapaper64185 ай бұрын

  Hi, may i know which heat press machine you used?

• 
  @acostajose115 ай бұрын

  👌👌

• 
  @jennhutch15995 ай бұрын

  My HP Inkjet printer won't even feed this paper through

• 
  @user-sh5bk8hc3l5 ай бұрын

  Reviews say the edges curl and once you put the paper in water the ink runs can you comment?

• 
  @koalapaper64185 ай бұрын

  Hello, may i know which waterslide decal you used

• 
  @user-sh5bk8hc3l5 ай бұрын

  This paper has horrible reviews

• 
  @Odolwa26 ай бұрын

  @kavya1638 had the same issue. they shipped me paper in an envelop and it was all bent up. they refused a refund. never do business with koala. who the heck ships printing paper in an envelope and not a box???

• 
  @koalapaper64186 ай бұрын

  You can contact us regarding any after-sales issues at our email: [email protected]

• 
  @funtastic15996 ай бұрын

  what temperature did u use?

• 
  @kavya16386 ай бұрын

  It's good paper, unfortunately, they ship it in a bubble envelope and not a box. Every time I order it, it's bent in 1 corner because the USPS workers are not careful with it. I asked them earlier today if they would ship it in a box and not an envelope, they said to save money they use an envelope and only ship in a box if you order a pack of 4 (over $100 purchase) as if.. buy another brand. I hear inkxpro sells some good paper, just don't buy from these guys.

• 
  @ralphchristianson7 ай бұрын

  I see you have several qualites of color paper such as premium and ultra premium, is there anywhere to see examples of the difference for photos as most of your samples reflect crafty examples which look great but do not show how the different papers reflect the tonal range of photographs, color or black and white.

• 
  @sarahhunter23507 ай бұрын

  No sound. Picture of computer screen is cut off so hard to follow. The Avery 22807 Word download doesn't allow you to move the image to center in the circle. Useless video.

• 
  @koalapaper64187 ай бұрын

  www.koalagp.com/pages/template

• 
  @Volunteerballoons7 ай бұрын

  Quick and to the point! Thank you!

• 
  @johklembarsky65719 ай бұрын

  Thank you for a short, easy to understand video!

• 
  @tamp839010 ай бұрын

  awesome! Thank you so much!

• 
  @cristianservelioriosrasgad780110 ай бұрын

  Hi, ¿where you Get the ICC Profile for that Paper ?

• 
  @Westcoasttrucker91611 ай бұрын

  I’m using a HP Color LaserJet Pro MFP M182nw and I noticed it smudges the paint as in two logos near each other any help would be greatly appreciated and I’m using Hayes clear decal laser paper a3 please help thank you

• 
  @alejandrocorona89204 ай бұрын

  I'm having the same issue, no matter what kind of paper I use. We might gotten non functional HP printers

• 
  @Westcoasttrucker9164 ай бұрын

  @@alejandrocorona8920 when printing use paper type labels and should be good to go I learned that it’s best to have the paper type on computer set to labels

• 
  @Westcoasttrucker9164 ай бұрын

  @@alejandrocorona8920 when printing use paper type labels and should be good to go I learned that it’s best to have the paper type on computer set to labels

• 
  @Westcoasttrucker9164 ай бұрын

  @@alejandrocorona8920 when printing use paper type labels and should be good to go I learned that it’s best to have the paper type on computer set to labels

• 
  @legaltags Жыл бұрын

  thank uuuuuu

• 
  @rogers6168 Жыл бұрын

  Hey there, just wanted to drop you a note-I was having issues with reading the cut sensor. Sometimes it works fine. Other times (like today), doesn't work at all. Tried everything! Spent close to 2 hours on 2 sheets of sticker paper. Found your video, tried the magic marker trick, and it works perfectly! Do not even have to use the matte scotch tape! I didn't even think of the magic marker trick. That is so simple! Thanks for posting video!!

• 
  @CasualCovert Жыл бұрын

  What type of marker did you use? I was about to throw my cricut out the window yesterday after it not reading with the tape just like you lol

• 
  @rogers6168 Жыл бұрын

  @@CasualCovert Used a Sharpie fine point permanent marker. Make sure you get the fine point tip. You want the marker to mimic the printed border, not make border bigger/thicker. Hope that makes sense.

• 
  @CasualCovert Жыл бұрын

  @@rogers6168 You are an actual legend! Thank you much. Excited to try this when I get home!

• 
  @rogers6168 Жыл бұрын

  @@CasualCovert Nah, the person that posted this video is the legend! Let us know if it worked for you. Like I said, worked perfectly for me.

• 
  @SweetCandyKiller Жыл бұрын

  Which sublimation ink did you use? Thank u so much 4 this vid! I KNEW there had to be a way to clean my existing printer for conversion

• 
  @pierresimmons1834 Жыл бұрын

  I have tried all of these ideas and mine still is getting sensor cut errors and i have the maker 3 and the explorer 2 neither one will cut

• 
  @MelissaRodriguez-ut2mb Жыл бұрын

  Same here! I hate it

• 
  @verneevern5 ай бұрын

  Me to I'm just getting a new machine with a different company

• 
  @ellenkency Жыл бұрын

  I can't thank you enough! You literally save my job!!!

• 
  @abbiepenn8009 Жыл бұрын

  How would you go about transferring a logo image with transparent sections? I’m wanting to print a white logo onto a red t-shirt. Will I have to cut out all the blank space individually? Does the white space transfer onto the T-shirt if left uncut? I hope this makes sense 😊

• 
  @mongmm. Жыл бұрын

  So I need to use two papers basically.

• 
  @knottyyarnies450 Жыл бұрын

  Mine says “inkjet” right on it so hopefully it is fine……I just got it today through Amazon so fingers are crossed it doesn’t smudge, I’ll update this once I try it.

• 
  @alegriagarden Жыл бұрын

  How did you go?

• 
  @knottyyarnies450 Жыл бұрын

  @@alegriagarden it worked great! Thanks for asking, totally forgot to come back to say that. I printed off some grungy tags and used “other” paper setting and used “best?” Setting whatever the top notch printing setting is. It’s even just a screen shot of a freebie and still looked/worked wonderfully.

• 
  @Muskette0411 ай бұрын

  I have a laser printer and I change my settings to cardstock and it worked It doesn't rub off

• 
  @krisalis100 Жыл бұрын

  Wow. This couldn't be any more useless. Super.

• 
  @nikkink3 Жыл бұрын

  Love the paper good quality can't wait to try label with my koala set

• 
  @carolineabraham7178 Жыл бұрын

  Do you peel the koala back off first before ironing ?

• 
  @koalapaper6418 Жыл бұрын

  For Koala dark transfer paper, you need to peel the koala back off first before ironing.

• 
  @jasminemiller5157 Жыл бұрын

  @@koalapaper6418 For koala dark transfer paper, how do you peel the back off with damaging the image , and what setting does the heat press has to be on ?

• 
  @Martina-lh8ln Жыл бұрын

  Hi

• 
  @saleemdurrani1394 Жыл бұрын

  Why did you skip one step after peeling the image?

• 
  @mayraganoza3262 Жыл бұрын

  Thank you! Great tips❤️

• 
  @loupwolf9975 Жыл бұрын

  Koalas Transfer is NOT transferring on to my tshirts

• 
  @koalapaper6418 Жыл бұрын

  Please contact our customer service team：[email protected]. We will solve the problem for you in time.

• 
  @rollieravert8954 Жыл бұрын

  Why wasn't the installation process completed. That's what I have been searching for. Do you puncter the seal in a specific manner ? Very poor instructions. A real set of instuctions should have been included with the product.

• 
  @einavrubin6353 Жыл бұрын

  What type of ink should I use for my Inkjet printer?

• 
  @koalapaper6418 Жыл бұрын

  Normal Ink

• 
  @nikkink3 Жыл бұрын

  Love just did my first tshirt wow

• 
  @wapperjaw8282 Жыл бұрын

  Well the fit the key or do I have to transfer the ink to the original bottles?

• 
  @Sulfen12 күн бұрын

  As long as they are 502 keys then it should work without having to transfer.

• 
  @Kendokonnects2 жыл бұрын

  I have the koala paper/sublimation paper 123gsm 100sheets, but i try using it on the mug but is working, please can i get more light on this. New KSP-8, 5x11-123

• 
  @Kendokonnects2 жыл бұрын

  How can i use koala sublimation paper 123gsm for mug

• 
  @koalapaper64182 жыл бұрын

  kzread.info/dash/bejne/pouBl5Kcn6fFhps.html

• 
  @holllyrhode2 жыл бұрын

  Lmao kill me please. Nothing is transferring. Im sat here w plain tshirt and getting nowhere

• 
  @koalapaper64182 жыл бұрын

  Please contact our customer service team：[email protected]. We will solve the problem for you in time.

• 
  @lunaas10292 жыл бұрын

  What kind of paper is the one you showed at the end?

• 
  @audreypiper19732 жыл бұрын

  Can you transfer images other than tshirts like hoodies?

• 
  @Robbie-mw5uu Жыл бұрын

  any cotton fabric

• 
  @amandashay12102 жыл бұрын

  This is the best sublimation paper I have ever used that has the highest transfer rate onto the fabrics!

• 
  @koalapaper64182 жыл бұрын

  Thank you for your support.