Пікірлер

• 
  @robertpetersen61223 сағат бұрын

  Use the box end, never the open end

• 
  @somlysom6315Күн бұрын

  What brand are those piler I gotta get me one of those

• 
  @CBR600RR05Күн бұрын

  Good info thanks for the video

• 
  @user-tp8is1hp3tКүн бұрын

  My trans went out and my aftermarket 3rd brake light started leaking while it’s been sitting waiting on trans to come back from shop and had mold all in it I’m fixing to have to remove everything and pressure wash carpet and let air dry for few days. 2001 Chevy Silverado 1500 extended cab

• 
  @Noypi54494Күн бұрын

  Did you round the corners off on that push lever?

• 
  @simplyofficial292 күн бұрын

  bruh 6.0 is fire also mane

• 
  @user-ob6vu8ji2i2 күн бұрын

  Or you could take the plate off and if the studs need to be removed just buy a 2.50 stud puller from harbor freight.

• 
  @KingAngel-yl5zs3 күн бұрын

  WHAT YEAR WOULD FIT A 2008 CREW CAB SILVERADO

• 
  @danm4003 күн бұрын

  So that pan does not include a gasket? I couldn't tell if the factory pan had one or not. Have you had any leaks or drips since the install?

• 
  @AlexAutrey3 күн бұрын

  Wait what the hell to remove a stud shouldn’t you use two nuts sandwiched. Would have been easier and I believe it’s the right way.

• 
  @isaacstrade93584 күн бұрын

  lol bro don’t know how to use his tools

• 
  @elagant22825 күн бұрын

  great video helped a ton

• 
  @papabapyro6 күн бұрын

  Just found your channel. new sub. Thought it was my hydro boost leaking, but gearbox/pitman arm seal pissing bad. Thanks for calling out the wrench sizes. I'm old(64) but after watching your vid I think I can handle it myself, I do have a lift ;) I flush my fluid every 30K. Cheers

• 
  @vincentjohnson91266 күн бұрын

  Thank you 🙏

• 
  @charlescollins55826 күн бұрын

  hey man, i know this videos 3 years old and you may know this by now. but, when measuring with the digital calipers at 5:00, the 2 protruding sharp fingers coming out from the opposite side you used to measure the inside diameter of the hole can be used to put inside the hole, and expanded until they make contact so you don’t have to eyeball it, and they can make contact to get a precise measurement. nice video!

• 
  @eddie-nc8gu6 күн бұрын

  I used it in my Gunns a few times. Cleans out barrel good.

• 
  @mohamedlabanieh90417 күн бұрын

  I just lost my cobras in a customers engine bay yesterday

• 
  @blohmymind7 күн бұрын

  98

• 
  @no1gpangma8 күн бұрын

  Please explain to me why so much lubricant is needed 🤷🏼‍♂️. Curious as I'm not sponsored by kroil. BTW, Free all works better, and you don't have to waste so much money .

• 
  @severocarbajal83639 күн бұрын

  So im confused! I clicked on the link for the up pipe, but it says driver side. Am i missing something?

• 
  @najeeshahid711610 күн бұрын

  140 foot pounds

• 
  @diggs46911 күн бұрын

  How do you use it

• 
  @stevengleave924111 күн бұрын

  How many miles does your truck have? I have a 06 LBZ 2500 and I'm trying to figure out how heavy of a 5th wheel or trailer I can pull with 375,000 miles? Any input would be greatly appreciated.

• 
  @ogland648211 күн бұрын

  Or, you could use two nuts and loosen it with a common crescent wrench. And you wouldn't mess up the threads for no reason.

• 
  @smokiethebear333412 күн бұрын

  The only flaw is the balancer having to come off to get the water pump out.

• 
  @lucbanks510913 күн бұрын

  There’s no way to get torque wrenche in there so hoping it’s tight enough?

• 
  @Elsanta66614 күн бұрын

  Whats the rpms on that thing, if they too high it will damege the blade after a few cuts

• 
  @beep_beep_beep17 күн бұрын

  Ill stick with klines

• 
  @BigDipper7917 күн бұрын

  Any generic obd scanner will give you that code. Stop playing silly. You must be sponsored. If so you should disclose that.

• 
  @bamf928517 күн бұрын

  Wouldn't even think snap on or knipex.. CHANNEL LOCK 410 or 414

• 
  @nelsoncisneros583917 күн бұрын

  great info, thanks for taking time to make a video..

• 
  @kinanalhawat675318 күн бұрын

  120?

• 
  @kinanalhawat675318 күн бұрын

  nm

• 
  @mrerkman018 күн бұрын

  Thanks for the help with the shoes. How come you didn't change the other bearing and both races?

• 
  @stevesinclair449919 күн бұрын

  This guy is great

• 
  @connorkurtz0120 күн бұрын

  I guess I'm just unlucky, ive cut 2 orings putting that coolant pipe back in

• 
  @ignacioperez226022 күн бұрын

  Did you have to leave the gasket in sun before wraping it around window ? How long did it take to wrap around im having tough time getting it to hold

• 
  @Cantsaydog22 күн бұрын

  That’s a total BS on Chevy part that emergency brake cable. I made mine adjustable back at the leaf spring engineers don’t have to do it so they don’t care now it’s a half hour job instead of having a heart attack trying to get those two together 😁

• 
  @clydecox32725 күн бұрын

  I know a guy that one of the pistons seized up couldn't get freed up. He had it about 4months harbor freight said sorry about your luck. 90day warrantee

• 
  @jsk227625 күн бұрын

  No

• 
  @thecarlonian25 күн бұрын

  Did you ever finish doing the rockers and cab corners?

• 
  @thecarlonian25 күн бұрын

  Sorry to hear about Zeus.

• 
  @zackk69526 күн бұрын

  Hold on! Don’t leave the end of that hose you ran down there open? You’re not worried it will suck air into the motor?

• 
  @kyleh361526 күн бұрын

  Nobody uses a stud instalation/removal tool? Or jam nut it and use a wrench? Pliers are a messy solution when dedicated tools exist

• 
  @carterjohnson816626 күн бұрын

  Very well detailed video

• 
  @Mike-rn8gs27 күн бұрын

  Where did you get the pully put onner

• 
  @edgarkoen123028 күн бұрын

  Channel locks

• 
  @motoxracer8928 күн бұрын

  Do you have to loosen the trans dip stick nut? I unbolted my bands but not the trans dipstick one and the downpipe will not move

• 
  @jimf145028 күн бұрын

  Ram 3500 Cummins HO on CAT scale has like 5500 lbs on the front axle, for price & quality Daytona 4 ton is the way to go

• 
  @Random-ed2xf28 күн бұрын

  And the myth is ? You literally said nothing and I can't understand half of it.

• 
  @josepena5906Ай бұрын

  Purple