Пікірлер

• 
  @user-sy5qd9nq8f21 күн бұрын

  good

• 
  @michaeltamajong298829 күн бұрын

  Another great lecture. So helpful. Please organize lectures so there is a demarcation with other supplementary videos.

• 
  @michaeltamajong298829 күн бұрын

  Would love to have a demarcation between the lectures and the supplementary videos

• 
  @michaeltamajong298829 күн бұрын

  Very great lectures. Thanks so much, however please organize the lectures chronologically. Will greatly appreciate.

• 
  @Samri-rs3wz29 күн бұрын

  Thank you very much

• 
  @SiyabongaSiyabonga-ix8zpАй бұрын

  this is proper where can i get the slides 🔥🔥🔥

• 
  @bibekkafle3348Ай бұрын

  Thank you !!

• 
  @harikumar4757Ай бұрын

  Sir if it is Datum B is mentioned in FCF ,then how to draw the functional gauge wrt Datum B. Movement of datum B wrt datum simulator B only Parallel,no other orientation.

• 
  @harikumar4757Ай бұрын

  Sir, how to understand whether the centre of feature locating zone is at circumference of the pattern locating zone at assembly.

• 
  @harikumar4757Ай бұрын

  Sir, is there any clearance between datum simulator B&C and Datum B&C respectively ,or is this clearance will maintain by the tolerance zone in the gauge pin.kindly reply

• 
  @harikumar4757Ай бұрын

  Sir, how to make gauge pin for PLTZF & FRTZF in composite positional tolerance , kindly reply.

• 
  @aztatzirubioisaac8863Ай бұрын

  Thank you for this video. It is a nice guide.

• 
  @andreya77482 ай бұрын

  Thank you! This video helped me understand the basics of DFMA

• 
  @andreya77482 ай бұрын

  Thank you! This video helped me understand the basics of DFMA

• 
  @sunilsah7862 ай бұрын

  Please post lecture on chapter 11

• 
  @user-vi8ee9hk5i3 ай бұрын

  ❤❤❤❤

• 
  @Life_of_Shravya3 ай бұрын

  Thanks you for nice info.... I would also like to have link to lecture 1 and 2.

• 
  @Auday3653 ай бұрын

  Great video Correction: In metric thread pitch is the distance between two adjacent threads.

• 
  @chickennugget53763 ай бұрын

  Absolutely right. I realized my mistake pretty much as soon as I finished the recording. I need to insert a correction in the video. LOL. Thanks for catching that.

• 
  @mahdyxalid21954 ай бұрын

  Thank you

• 
  @Aswinkarthik-ts1ky5 ай бұрын

  Life saver thank you :)

• 
  @SunilPatel-ju6xi6 ай бұрын

  Hello Sir, this is a nice informative session. May I have a copy of this presentation?

• 
  @abdullahmohammedzainudeen54456 ай бұрын

  Thank you. Please where can I get part 2?

• 
  @user-rf3zc4pu7h6 ай бұрын

  Thanks for sharing. These videos are great.

• 
  @shazindv22397 ай бұрын

  Thank you very very much 😊

• 
  @user-nh7gk1bw7d7 ай бұрын

  In your first example, what would be the diferance when only datum A denoted compare to datum A and datum B both denoted ?

• 
  @chickennugget53767 ай бұрын

  Datums A and B lock the .020" tolerance zone in the Datum Ref Frame and prevent the tolerance zone from shifting, in this case, laterally (Datum B) and vertically (Datum A). If Datum B was omitted the tolerance zone would be free to move laterally, and only be prevented (by Datum A) from moving vertically.

• 
  @krokotube8 ай бұрын

  Error @10:32! "1.5" *DOES NOT* mean that there is, to quote you "1.5 threads per millimetre (or 3 threads every 2 mm)". "1.5" means there is 1.5mm between threads. Skip all that "inverse logic" in metric system! :) This is tight and concise kzread.info/dash/bejne/dWicxM6Dd9K6es4.html

• 
  @chickennugget53768 ай бұрын

  You are correct. Don't know what I was thinking when I froze there and then stated the wrong thing. I was going to say the correct definition but my brain froze. Thanks for catching that.

• 
  @chickennugget53763 ай бұрын

  Thanks. You are of course correct. I noticed this pretty quickly after finishing the video. Need to add a correction to the video soon.

• 
  @user-qm1ng9zt3m8 ай бұрын

  thank you “Composit Position” appears to be meaningless when the part is completely fixed in the assembled state and cannot move or rotate at all. So, is “composit position” used when parts can move or rotate slightly in the assembled state? I am curious in what cases “composit position” is applied to part drawings.

• 
  @simpledanman8 ай бұрын

  Man I wish you’d quit trying to teach the shit and just show me what to do so I could get my stuff over with this semester. Autocad is such dogshit 🙄

• 
  @Zakariae92 Жыл бұрын

  Hello sir, thanks for the video. it is great one with very useful information. I have just one question. Is there anywhere where i can find the rules of parts' assembly (order assembly, assembly diagram....etc) thank you

• 
  @altaykaan Жыл бұрын

  fascinating lecture, thanks

• 
  @altaykaan Жыл бұрын

  Thanks for nice lecture

• 
  @altaykaan Жыл бұрын

  Nice lectures, i appreciated your effort sir, thanks

• 
  @DanielPontoriero Жыл бұрын

  This OnLine Tool and Explanation are Excellent. Thank you very much!

• 
  @richie5629 Жыл бұрын

  What is name of the text and software

• 
  @TheKlickitat Жыл бұрын

  What text book are you using.

• 
  @olanordmann7836 Жыл бұрын

  Hi. Im stuck on the "post process" thing. I am using a homebuilt CNC machine, so what do I select under the "post" selection tab?

• 
  @moisesnavarro6269 Жыл бұрын

  In a half-section view of this part would one of the slots appear down the center, meaning it would be centered 90 deg. from the right and left slots in that view.

• 
  @chickennugget5376 Жыл бұрын

  No. The slot would only appear on the sectioned half of the half-section view and the unsectioned half would appear as viewed from the exterior (with no interior/section view). The unsectioned half should have no hidden lines based on the rule for not showing hidden lines in a section view.

• 
  @moisesnavarro626911 ай бұрын

  @@chickennugget5376 thanks

• 
  @srinivaspoojary839 Жыл бұрын

  Thank you and nice video

• 
  @rishabhtiwari4493 Жыл бұрын

  your vedio is very informative.. thank you so much sir for this vedio.

• 
  @YeetgodYeet Жыл бұрын

  Thank you, this was very helpful

• 
  @mohibs83 Жыл бұрын

  awesome presentation .

• 
  @MrZee-wl7cm Жыл бұрын

  Good video

• 
  @harikumar47572 жыл бұрын

  In level 2 ,form tolerance 0.16 is applying to feature or feature of size,if it is in FOS, tolerance is effecting to derived medium plane, means center of size,is it correct or not . kindly a reply .

• 
  @harikumar47572 жыл бұрын

  Thank you for your all special training in gd&t

• 
  @gilbert43512 жыл бұрын

  Great Video! Very clearly explained and very helpful for my notes in my current Machine Drafting course. Thank You Sir! Will be looking forward for more videos.

• 
  @nityanshsingh97902 жыл бұрын

  Excellent video, all doubts are clear.

• 
  @ghjkrsxcg2 жыл бұрын

  What happened to chapter 1 &2

• 
  @mvccaetautomationengineeri16552 жыл бұрын

  Chapter 1: Introduction to Dimensioning and Tolerancing and 2: Dimensioning and Tolerancing Symbology from GD&T: Application and Interpretation, 7th Edition, By: Bruce A. Wilson (www.g-w.com/gdt-application-and-interpretation-2021) were assigned for reading and did not have a video lecture.

• 
  @cctv502 жыл бұрын

  Good 👍

• 
  @jesalynragel38592 жыл бұрын

  Can i ask? Where did you find out the cost and assembly time? There are tools or software you used to find out?

• 
  @mvccaetautomationengineeri16552 жыл бұрын

  The reference for the cost and assembly time portion of the presentation are from Product Design for Manufacture and Assembly by Boothroyd, Dewhurst, and Knight.

• 
  @celsotardeli96232 жыл бұрын

  Ty very much for this video. Really clear information