U need to tamp the coffee for the express n crema to comr through
@angelwingsadventures3475 күн бұрын
He didn't tamp
@colinsace110 күн бұрын
The spider support started to fall on my Miele W5478 but was 10 years old Miele wrote it off and wouldn’t fix it even though it was totally fixable…
@everybodyneedsadave9 күн бұрын
It a lot of work to fix
@colinsace17 күн бұрын
@@everybodyneedsadaveI get that but isn’t that what I paid insurance for ?? I got a LG turbowash360 10kg now and it washes a lot better than the Miele and is a lot quieter but it wasn’t loud before the drum started to go. Thought it was meant to last 20 years they say but mine wasn’t the case… 😕 But happy with my new one.
@evieemaya8813 күн бұрын
Great video. You said it was thenchain tensioner, but what was wrong with it, did you not get a new replacement in the kit?
@everybodyneedsadave9 күн бұрын
Yes you get tensioner/ guides and sprockets
@everybodyneedsadave9 күн бұрын
The tensioner ends up extended fully but the chain still loose
@guilhermefujizaki922214 күн бұрын
My did the same. Just drop few .
@everybodyneedsadave9 күн бұрын
Sorry to hear that
@crisstu14 күн бұрын
what happend finally what was the problem??
@everybodyneedsadave14 күн бұрын
I will be posting early next week Waiting for oxygen sensor
@muffmuncher9923 күн бұрын
Check your long and short term fuel trims using obd diagnostic tool that looks like a rich condition to me. Does it smell eggy? U might have a bad upstream o2 sensor
@everybodyneedsadave22 күн бұрын
Thanks I will have a look
@JoosySmooyay23 күн бұрын
Try using one of those maguiars car bombs to get rid of the ciggy smell. I had a mate buy a car from a dog owner and he said that cleared the smell up for him. I think it only takes about 10 minutes from start to finish too
@everybodyneedsadave23 күн бұрын
Thanks I will try that
@yueru3324 күн бұрын
Good luck with that mate! I like the video format where you have a video of every stage of the process. Great stuff and I've just subscribed.
@everybodyneedsadave24 күн бұрын
Thank you
@benedictaagbebo8844Ай бұрын
I took my machine to the repair shop for repairs and he said the drum is spoiled and have to replace it another one . I want know if the drum do spoils
@everybodyneedsadaveАй бұрын
What does he mean by spoiled? The spider on the back can break
@christinemcburnie6462Ай бұрын
I like the video
@hybridangel34032 ай бұрын
No ish! Your right but thats obvious.
@everybodyneedsadave2 ай бұрын
Don't understand what you mean
@Macky11012 ай бұрын
How much is scrap price for pewter in UK?
@everybodyneedsadave2 ай бұрын
Sorry don't know
@davedebang-bang61682 ай бұрын
That’s what you get for using quick wash. Quick wash should abolished
@everybodyneedsadave2 ай бұрын
Your not wrong
@cadicorniche2 ай бұрын
This is an insult.
@markg13222 ай бұрын
Really useful review - thank you. How has the BBQ stood the test of time 8 months later? Would you still recommend it?
@everybodyneedsadave2 ай бұрын
Not had it out yet but seems okay
@kazhughes1469Ай бұрын
Is the chain your lightning rod. Stick a match on it incase ignition doesn't work
@ChocolateGaming24 күн бұрын
Can I ask a question, the back infared when it's on can u hear a hissing sound. Even after it's lit? The side infared doesn't do it but I seen there is a gold valve at the back and it's got 4 holes on it. Thinking they are meant to be?
@antoniocoroa14992 ай бұрын
Hi! Good video. Is it possible to replace just the heating element and assemble the pump back? You said you had to brake the mounting?
@everybodyneedsadave2 ай бұрын
Yes I think so
@AdobeAnimateTutorials4 күн бұрын
@@everybodyneedsadave you need to be sure lol
@everybodyneedsadave2 ай бұрын
Thanks maybe one day you will ha e one 😂
@TsianHazel-gl6rw2 ай бұрын
Cool car
@TsianHazel-gl6rw2 ай бұрын
I have
@everybodyneedsadave2 ай бұрын
HAS ANYONE HAD THIS ON THEIR POLO?
@youngyankee133 ай бұрын
the ground coffee aint grounded for an espresso.
@everybodyneedsadave3 ай бұрын
To make an espresso coffee, water is heated and pushed through ground coffee at a really high pressure. If the coffee grind is too coarse, the water will rush straight through and you'll end up with a very watery coffee, but if it's ground finely a whole world of delicious coffee awaits.
@everybodyneedsadave3 ай бұрын
Grounded? Back to school for you to learn English
@quarrgallery16823 ай бұрын
You did more dismantling than may be needed. In order to remove the front of the machine you do not need to remove the control panel. Take out the screws holding the door lock and the Torx 30 below the door. Remove the seal spring as shown and the two screws at the bottom of the front The front will them drop down and clear the pins holding it at the top.
@everybodyneedsadave3 ай бұрын
Thanks for the info
@mlah78103 ай бұрын
Did you submerge the drawer in brick acid or spray it on then clean?
@everybodyneedsadave3 ай бұрын
I just poured a little in the tray
@qsjimford3 ай бұрын
Spectacular views and the commentary is second to none!!!
@everybodyneedsadave3 ай бұрын
Thanks for your input
@regi3.14 ай бұрын
One never gets tired of these gorgeous views.
@everybodyneedsadave4 ай бұрын
I agree
@regi3.14 ай бұрын
I was there for this Newyears eve fireworks at the Harbour. It was too good. You may watch my vlog of the fireworks on my channel when you find the time.
@everybodyneedsadave4 ай бұрын
@@regi3.1 I will Thanks
@user-xs1fc4bz3g4 ай бұрын
What if its show that waterfault alert into miele washing machine sir?
@everybodyneedsadave4 ай бұрын
Check hoses for blockage
@qsjimford4 ай бұрын
Looks hot
@ilyabixon76825 ай бұрын
I have the same machine- no problems
@everybodyneedsadave4 ай бұрын
Can I borrow it 🤔
@combustion14765 ай бұрын
Just done one, horrible design, who would design a chain tensioner without a ratchet, stupidity at it's finest. Probably ratling as got low oil pressure, did you clean the sump , pickup checked ? Mine worked excellent after the replacement, but it is quite a junky car overall.
@everybodyneedsadave4 ай бұрын
Going to look at the pick up next Thanks for your input
@everybodyneedsadaveАй бұрын
Pick up was blocked solid with the chain guide
@combustion1476Ай бұрын
@@everybodyneedsadave not a surprise. Hopefully you got it sorted.
@xcuber1235 ай бұрын
What did it end up being? Chain tensioner?
@everybodyneedsadave4 ай бұрын
Yep it's the tensioner
@sergeydimitrov61055 ай бұрын
Looks like coffee is too fine grounded
@everybodyneedsadave4 ай бұрын
Tried 3 different types
@drivingreview15785 ай бұрын
will it tell you where the airbag fault is or does it just turn off the airbag light?
@guguigugu5 ай бұрын
they literarry just slammed whatever letters on the keyboard and called it a day
@paulb97696 ай бұрын
The thick foil heater rings are a lot cheaper than a new pump.
@christinetanner83586 ай бұрын
No clue about manners. What an annoying person. I would have moved.
@serviceosnobjektsikringas28796 ай бұрын
I Have the same proble with my W1 that is about 7 years old. It looks like Miele are not anymore the Miele.
@grahamdrew10696 ай бұрын
I live in atown where a tank in the loft melted and the burst was over the woman's bed causing her horrific death No tank or metal is better
@Woot-Zee7 ай бұрын
2023... and they still build spiders like these...
@salvatores.77317 ай бұрын
Per toglierlo prendete una pinza di quelle bloccabili e distruggetelo, altrimenti è un lavoro impossibile e da pazzi, il taglierino lasciatelo perdere, rischiate seriamente di ferirvi
@cw21267 ай бұрын
quicker doing it by hand lol
@everybodyneedsadave7 ай бұрын
Maybe but the car manufacturers jack is not very stable ,this is better for the wife.
@agnosticevolutionist35677 ай бұрын
Nice to see a woman doing a man’s job for a change, she’s not got the hands for quick up and down movements.
@everybodyneedsadave7 ай бұрын
Yes we bought as my wife struggled with the manual jack the other day. When home I have professional trolley jack. Never used the balloons type must try one day 👍
@send2gl7 ай бұрын
I seem to recall quite a few years back that an inflatable balloon could be placed under the car, within reason, as it spread the load, it could be positioned anywhere. Scissor jacks were always useful although in my enthusiast days had a nice trolley jack.
@ro63rto7 ай бұрын
I had a mobile tyre guy use one more that 10 years ago on my car. Still had to be careful where he placed it though.
@everybodyneedsadave7 ай бұрын
Yes
@user-ux9sr2te1n7 ай бұрын
It looks and sounds ship...am I right??
@donnamcelrea77748 ай бұрын
We just replaced the two Friction Dampers, Shaft Seal and the V-Belt. All purchased from Miele for our W1213 washer. We were so happy until we tried to turn it on. The beeper was repeatedly beeping and the display showed - - -. We never touched any part of the digital control panel so we cannot figure this out. We took pictures as we took everything apart. Can you help us figure this out? Thank you very much, Donna Mc
@Voltaireooooo8 ай бұрын
Icky.
@everybodyneedsadave8 ай бұрын
Not bent valves ,there is compression on all cylinders
Пікірлер
U need to tamp the coffee for the express n crema to comr through
He didn't tamp
The spider support started to fall on my Miele W5478 but was 10 years old Miele wrote it off and wouldn’t fix it even though it was totally fixable…
It a lot of work to fix
@@everybodyneedsadaveI get that but isn’t that what I paid insurance for ?? I got a LG turbowash360 10kg now and it washes a lot better than the Miele and is a lot quieter but it wasn’t loud before the drum started to go. Thought it was meant to last 20 years they say but mine wasn’t the case… 😕 But happy with my new one.
Great video. You said it was thenchain tensioner, but what was wrong with it, did you not get a new replacement in the kit?
Yes you get tensioner/ guides and sprockets
The tensioner ends up extended fully but the chain still loose
My did the same. Just drop few .
Sorry to hear that
what happend finally what was the problem??
I will be posting early next week Waiting for oxygen sensor
Check your long and short term fuel trims using obd diagnostic tool that looks like a rich condition to me. Does it smell eggy? U might have a bad upstream o2 sensor
Thanks I will have a look
Try using one of those maguiars car bombs to get rid of the ciggy smell. I had a mate buy a car from a dog owner and he said that cleared the smell up for him. I think it only takes about 10 minutes from start to finish too
Thanks I will try that
Good luck with that mate! I like the video format where you have a video of every stage of the process. Great stuff and I've just subscribed.
Thank you
I took my machine to the repair shop for repairs and he said the drum is spoiled and have to replace it another one . I want know if the drum do spoils
What does he mean by spoiled? The spider on the back can break
I like the video
No ish! Your right but thats obvious.
Don't understand what you mean
How much is scrap price for pewter in UK?
Sorry don't know
That’s what you get for using quick wash. Quick wash should abolished
Your not wrong
This is an insult.
Really useful review - thank you. How has the BBQ stood the test of time 8 months later? Would you still recommend it?
Not had it out yet but seems okay
Is the chain your lightning rod. Stick a match on it incase ignition doesn't work
Can I ask a question, the back infared when it's on can u hear a hissing sound. Even after it's lit? The side infared doesn't do it but I seen there is a gold valve at the back and it's got 4 holes on it. Thinking they are meant to be?
Hi! Good video. Is it possible to replace just the heating element and assemble the pump back? You said you had to brake the mounting?
Yes I think so
@@everybodyneedsadave you need to be sure lol
Thanks maybe one day you will ha e one 😂
Cool car
I have
HAS ANYONE HAD THIS ON THEIR POLO?
the ground coffee aint grounded for an espresso.
To make an espresso coffee, water is heated and pushed through ground coffee at a really high pressure. If the coffee grind is too coarse, the water will rush straight through and you'll end up with a very watery coffee, but if it's ground finely a whole world of delicious coffee awaits.
Grounded? Back to school for you to learn English
You did more dismantling than may be needed. In order to remove the front of the machine you do not need to remove the control panel. Take out the screws holding the door lock and the Torx 30 below the door. Remove the seal spring as shown and the two screws at the bottom of the front The front will them drop down and clear the pins holding it at the top.
Thanks for the info
Did you submerge the drawer in brick acid or spray it on then clean?
I just poured a little in the tray
Spectacular views and the commentary is second to none!!!
Thanks for your input
One never gets tired of these gorgeous views.
I agree
I was there for this Newyears eve fireworks at the Harbour. It was too good. You may watch my vlog of the fireworks on my channel when you find the time.
@@regi3.1 I will Thanks
What if its show that waterfault alert into miele washing machine sir?
Check hoses for blockage
Looks hot
I have the same machine- no problems
Can I borrow it 🤔
Just done one, horrible design, who would design a chain tensioner without a ratchet, stupidity at it's finest. Probably ratling as got low oil pressure, did you clean the sump , pickup checked ? Mine worked excellent after the replacement, but it is quite a junky car overall.
Going to look at the pick up next Thanks for your input
Pick up was blocked solid with the chain guide
@@everybodyneedsadave not a surprise. Hopefully you got it sorted.
What did it end up being? Chain tensioner?
Yep it's the tensioner
Looks like coffee is too fine grounded
Tried 3 different types
will it tell you where the airbag fault is or does it just turn off the airbag light?
they literarry just slammed whatever letters on the keyboard and called it a day
The thick foil heater rings are a lot cheaper than a new pump.
No clue about manners. What an annoying person. I would have moved.
I Have the same proble with my W1 that is about 7 years old. It looks like Miele are not anymore the Miele.
I live in atown where a tank in the loft melted and the burst was over the woman's bed causing her horrific death No tank or metal is better
2023... and they still build spiders like these...
Per toglierlo prendete una pinza di quelle bloccabili e distruggetelo, altrimenti è un lavoro impossibile e da pazzi, il taglierino lasciatelo perdere, rischiate seriamente di ferirvi
quicker doing it by hand lol
Maybe but the car manufacturers jack is not very stable ,this is better for the wife.
Nice to see a woman doing a man’s job for a change, she’s not got the hands for quick up and down movements.
Yes we bought as my wife struggled with the manual jack the other day. When home I have professional trolley jack. Never used the balloons type must try one day 👍
I seem to recall quite a few years back that an inflatable balloon could be placed under the car, within reason, as it spread the load, it could be positioned anywhere. Scissor jacks were always useful although in my enthusiast days had a nice trolley jack.
I had a mobile tyre guy use one more that 10 years ago on my car. Still had to be careful where he placed it though.
Yes
It looks and sounds ship...am I right??
We just replaced the two Friction Dampers, Shaft Seal and the V-Belt. All purchased from Miele for our W1213 washer. We were so happy until we tried to turn it on. The beeper was repeatedly beeping and the display showed - - -. We never touched any part of the digital control panel so we cannot figure this out. We took pictures as we took everything apart. Can you help us figure this out? Thank you very much, Donna Mc
Icky.
Not bent valves ,there is compression on all cylinders
my friend had miele actually lasted 20 years