Hey cool video I have the same system which belts did you use I cant find any info on that?
@ProFox-Ай бұрын
I got a bunch of assorted belts in bulk from China and found some that fit.
@collin_0196Ай бұрын
@@ProFox- ok thanks
@corpsegrinderken63992 ай бұрын
Jake, after trying all the other techniques i seen on here that didnt work I tried the glue stick trick, I worked perfect the 1st time.Thx !!!
@matty65983 ай бұрын
I'm thinking of getting an scr 22 it's pretty similar looking to this one
@largemarge53834 ай бұрын
It is very difficult to find any info on cybernet audio
@ofb9234 ай бұрын
It’s been 5 years… Is it still holding up well? Just got mine last December, really enjoying it.
@guitarguts6664 ай бұрын
suction cup should work too
@Simonadas047 ай бұрын
It's really funny that they actually get fooled. I do this all the time
@carlubambi55418 ай бұрын
I used my vacuum cleaner .it worked perfectly
@B.Ruslan197810 ай бұрын
Тake Karcher vacuum.
@David.199010 ай бұрын
I didn't know about this technique. Thank you and have a good day my friend.
@bestopinion925710 ай бұрын
But what is your daily activity? Digging with bare hands?
@ProFox-10 ай бұрын
It's sometimes an activity that I do.
@bestopinion925710 ай бұрын
@@ProFox- Many complained for broken logs with this model. I see yours like ... that and still no broken logs.
@lalestrusawnds180311 ай бұрын
Use vacuum cleaner
@Jordannofun11 ай бұрын
song in the intro?
@MonsterMovee11 ай бұрын
Dude why'd you take the tags off the front grill? That's what makes these so cool!
@TechTokOffical Жыл бұрын
I'm gonna figure out how to restore the orginal stuff as much as possible. The band may be a given but the some people would prefer to keep the orginal bezels and if one could figure out how to repair them and bring them back to spec...
@TechTokOffical Жыл бұрын
If u would have used just a DAB of toothpaste with no water u would have got the results u wanted. If u ever watched someone buff a car look at the amount of product they use and how much surface it covers...it's the same thing with that crystal only scaled WAY down
@valerioginominio8138 Жыл бұрын
Io faccio con il bidone aspiratutto
@triples4good Жыл бұрын
Try using a hair dryer now and shrink the composite of the cone.
@ttyler77414 Жыл бұрын
Should have started with wet 2000 grit then polish
@Dobrovinskiy Жыл бұрын
It works
@Dobrovinskiy Жыл бұрын
👍
@DeepInsideZettaiRyouiki Жыл бұрын
Vacum Cleaner ? ...just go delicate with suction and don't damage it more ...use some elastic cord/rubber tube between hard plastic and speaker.
@StAtus4BGMaddictZZ Жыл бұрын
0:52
@jayAMG7 Жыл бұрын
Just use a piece of scotch tap. Lay the tape on the dent and pull it back up
@lamas92 Жыл бұрын
Not so good for me...
@MyWrock Жыл бұрын
just put your lips and inhale. much better and more efficient 😎
@germanmarambio66 Жыл бұрын
Súper...🧐👌
@goodall1bay Жыл бұрын
I'll try that
@angvuvan9027 Жыл бұрын
???
@bijithachuachu5101 Жыл бұрын
Thanks
@Isaiah134 Жыл бұрын
Very pretty birds look it up we have a few that comes around from time to time
@ttonAb2 Жыл бұрын
This was the only method that was able to somewhat fix my covers. They are fiber caps but if youre careful you can do it without any further damage. I used my big shop vac and they didn't even budge. I found using a hair dryer helped to soften the dome a bit and allowed the hot glue to come off easy after a few slow pulling attempts.
@user-hq6xw6db7h Жыл бұрын
Нет товарного вида 🤣🤣🤣
@songnhacDCB Жыл бұрын
vớ vẩn
@LukeFlegg Жыл бұрын
To release the glue stick you need to twist it, not keep pulling it
@rickastley9469 Жыл бұрын
Naked raygun?
@raybarrett7985 Жыл бұрын
try carefully using a vacuum cleaner works perfectly
@xsauce3858 Жыл бұрын
This worked for me though it takes a the shiny layer of the cone and leaves it a bit rough.
@chinweiong4044 Жыл бұрын
did your watch have lug problem?
@swingmanic Жыл бұрын
I've been pretty successful using a vacuum cleaner but just don't go crazy!!
@Zullkrokus Жыл бұрын
1st of all...u can just buy the replacement glass. Another thing, wouldnt it be more easier if u take the bezel off before polishing it since u r gonna change it to a new one later on..?
@resed00992 жыл бұрын
Ja jsem měl stejný problém on stačí vysavač chapež
@mercedesblack78282 жыл бұрын
Brilliant!
@tinobrouwer2 жыл бұрын
Just use a vacuum cleaner to pull it out
@joshrandall39822 жыл бұрын
You can also use a hoover with a sock over the end so it doesnt damage it
Пікірлер
Nice.
Good vid about a great watch, love mine.
How did you remove the grills?
Hey cool video I have the same system which belts did you use I cant find any info on that?
I got a bunch of assorted belts in bulk from China and found some that fit.
@@ProFox- ok thanks
Jake, after trying all the other techniques i seen on here that didnt work I tried the glue stick trick, I worked perfect the 1st time.Thx !!!
I'm thinking of getting an scr 22 it's pretty similar looking to this one
It is very difficult to find any info on cybernet audio
It’s been 5 years… Is it still holding up well? Just got mine last December, really enjoying it.
suction cup should work too
It's really funny that they actually get fooled. I do this all the time
I used my vacuum cleaner .it worked perfectly
Тake Karcher vacuum.
I didn't know about this technique. Thank you and have a good day my friend.
But what is your daily activity? Digging with bare hands?
It's sometimes an activity that I do.
@@ProFox- Many complained for broken logs with this model. I see yours like ... that and still no broken logs.
Use vacuum cleaner
song in the intro?
Dude why'd you take the tags off the front grill? That's what makes these so cool!
I'm gonna figure out how to restore the orginal stuff as much as possible. The band may be a given but the some people would prefer to keep the orginal bezels and if one could figure out how to repair them and bring them back to spec...
If u would have used just a DAB of toothpaste with no water u would have got the results u wanted. If u ever watched someone buff a car look at the amount of product they use and how much surface it covers...it's the same thing with that crystal only scaled WAY down
Io faccio con il bidone aspiratutto
Try using a hair dryer now and shrink the composite of the cone.
Should have started with wet 2000 grit then polish
It works
👍
Vacum Cleaner ? ...just go delicate with suction and don't damage it more ...use some elastic cord/rubber tube between hard plastic and speaker.
0:52
Just use a piece of scotch tap. Lay the tape on the dent and pull it back up
Not so good for me...
just put your lips and inhale. much better and more efficient 😎
Súper...🧐👌
I'll try that
???
Thanks
Very pretty birds look it up we have a few that comes around from time to time
This was the only method that was able to somewhat fix my covers. They are fiber caps but if youre careful you can do it without any further damage. I used my big shop vac and they didn't even budge. I found using a hair dryer helped to soften the dome a bit and allowed the hot glue to come off easy after a few slow pulling attempts.
Нет товарного вида 🤣🤣🤣
vớ vẩn
To release the glue stick you need to twist it, not keep pulling it
Naked raygun?
try carefully using a vacuum cleaner works perfectly
This worked for me though it takes a the shiny layer of the cone and leaves it a bit rough.
did your watch have lug problem?
I've been pretty successful using a vacuum cleaner but just don't go crazy!!
1st of all...u can just buy the replacement glass. Another thing, wouldnt it be more easier if u take the bezel off before polishing it since u r gonna change it to a new one later on..?
Ja jsem měl stejný problém on stačí vysavač chapež
Brilliant!
Just use a vacuum cleaner to pull it out
You can also use a hoover with a sock over the end so it doesnt damage it
I use a small vacuum cleaner. Works everytime.
thank you share 😍