Пікірлер

• 
  @PsychonautFPV6 күн бұрын

  sub.

• 
  @PsychonautFPV6 күн бұрын

  Thanks mate!! in the manual they say uart 5 but it is uart 6

• 
  @ALWA7SHSEX16 күн бұрын

  Can the images be uploaded anywhere on the Internet?

• 
  @tanattruong598627 күн бұрын

  what is your battery?

• 
  @Nekrorass27 күн бұрын

  Hello, I had a problem with the vtx integrated into this board, suddenly the image was not stable as if it came and went continuously... I have changed the vtx antenna in the camera and I can't find a solution, can you help me? thank you

• 
  @jiminlovelife28 күн бұрын

  Wow❤

• 
  @dachlop29 күн бұрын

  Hola, ¿qué cámara usaste con el vtx M03? Tengo el Meteor 85 2022 versión FrSky y cámara Runcam Nano, en Betafpv me dicen que el vtx si es compatible con mi placa pero no me aclaran las dudas respecto a qué cámara puedo usar (la C03 no es co.patible). Espero puedas ayudarme. Muchas gracias de antemano. Saludos desde Perú

• 
  @Viseo3dpАй бұрын

  I got the same one they fly great the only thing i wish i had gotten is the TBS crossfire version for some season there elrs receivers are not very good range is crap and i had one die on me already so i put a radiomaster receiver in and now works great but the TBS version people are saying fly's much smoother.

• 
  @kratzeniАй бұрын

  Misleading title, has nothing to do with a review

• 
  @flat-eartherАй бұрын

  WTF is the point of this video?

• 
  @unknw51Ай бұрын

  What is the weight in total?

• 
  @GeorgeCeeАй бұрын

  Thank You . Same for me in Betaflight. No Magnetometer. Probably OK in iNAV. I'm using Foxeer and NewBeeDrone M10Q Micro GPS.

• 
  @rianlira4111Ай бұрын

  hello everything is fine? Could you tell me if the crux35 battery cable is 18awg or 16awg? I have a project based on it

• 
  @flylionАй бұрын

  it's 18 awg and I subscribed you

• 
  @rianlira4111Ай бұрын

  @@flylion Thanks for the information, I'm going to use 16awg, I can't find 18awg on aliexpress and when I do it's double the 16 and I don't think it changes almost anything

• 
  @calixchrist5705Ай бұрын

  😊

• 
  @gsgsgsgs3650Ай бұрын

  I'd like to use this in a meteor 85 due to fc damage. Do I have to do more than a firmware flash? Does the esc have to also be flashed?

• 
  @Fearless_FlyerАй бұрын

  👍

• 
  @watermelon7717Ай бұрын

  very usefull!!!

• 
  @flylionАй бұрын

  Thanks for your reply and I subscribed to your channel

• 
  @watermelon7717Ай бұрын

  @@flylion tks bro!

• 
  @FinTecLaw2 ай бұрын

  ❤

• 
  @FinTecLaw2 ай бұрын

  ❤

• 
  @miena-pb9ri2 ай бұрын

  ❤Thanks for posting this, it's exactly what I was looking for.

• 
  @flylionАй бұрын

  Your welcome 🙏 🤗 and I subscribed you

• 
  @miena-pb9ri2 ай бұрын

  ❤

• 
  @squaddingquads2 ай бұрын

  How does it fly? Any videos?

• 
  @flylion2 ай бұрын

  It doesn't fly very well, so we're making it 25 inches again. and I subscribed you

• 
  @VianNoidz2 ай бұрын

  didnt know they would submerge like that

• 
  @nationalist19692 ай бұрын

  Will it bind with a radiomaster zorro?

• 
  @shotbyarian2 ай бұрын

  any news to this issue?

• 
  @ceploktelor54892 ай бұрын

  Good😮😮

• 
  @flylion2 ай бұрын

  Thanks reply and I subscribed you

• 
  @highwaltage2 ай бұрын

  no use for compass in betaflight....

• 
  @mrthingdudemanАй бұрын

  Wrong

• 
  @highwaltageАй бұрын

  @@mrthingdudeman enlighten me then. mr wrong.

• 
  @mrthingdudemanАй бұрын

  @@highwaltage Its used for Return to Home. Its not needed, but can help keeping course.

• 
  @highwaltageАй бұрын

  @@mrthingdudeman nice of you to correct urself. (its not needed) and how does compass help keep course in betaflight without proper alignment?

• 
  @mrthingdudemanАй бұрын

  @@highwaltage You said "no use for compass in betaflight". There is a use, so you were wrong. In BF 4.5, there is a button on the start page to calibrate the mag. Lets end this. I shouldnt have commented.

• 
  @prov4182 ай бұрын

  Did you get a longer flight time and dynamic idle working?

• 
  @jimmywallace12552 ай бұрын

  No volume?

• 
  @FPVRacingDrone2 ай бұрын

  My BLHeli Configurator looks different and says something like "0.19 not supported" ... what am I doing wrong?

• 
  @unknw512 ай бұрын

  all of these settings are wrong, the drone does not fly with this setting, do not believe this video

• 
  @flylion2 ай бұрын

  This is a literal version of the BTFL file provided by HappyModel, but you can check it yourself.

• 
  @unknw512 ай бұрын

  @flylion there is nothing remotely close to the settings you are making. both frsky and elrs dump file do not have these settings. you are giving misleading information.

• 
  @divingfalconfpv46023 ай бұрын

  Check if mag stayed selected in config. if so sometimes you have to unplug drone and replug it in. Also on my quads the compass wont read right on BF. they work on inav but not BF

• 
  @flylion2 ай бұрын

  Thanks for your comment and subscribed to your channel

• 
  @tabalaistation89443 ай бұрын

  Nice freestyle, I am also using cineape 25, is this the stock firmware and proppeller? I also have a problem with a vtx that has been set to 600mw but the info on the OSD only shows 200 mw, maybe there is a solution from you

• 
  @flylion2 ай бұрын

  My Firmware is BTFL 4.4.3 and stock props And Setting is below kzread.info/dash/bejne/eYeM1Nh-YauXqrw.htmlsi=tkykpawO36wJs9ls And follow U Channel

• 
  @tabalaistation89443 ай бұрын

  What updates did you experience after upgrading the Cinemape 25 firmware?

• 
  @flylion2 ай бұрын

  I've flown dozens of times and never had any issues. I upgraded to use GPS, but haven't run it yet.

• 
  @tabalaistation89442 ай бұрын

  @@flylion Are there any new features or improved flying performance compared to the stock firmware when the drone was purchased?

• 
  @hardtoplay81113 ай бұрын

  What type of cable do you use exactly? Because I have the same and it doesn't work. I suppose that problem is in exact version of hdmi (maybe, 2.0 or higher) or in signal direction (hdmi for output and mini hdmi for input or bidirectional cable) but I'm not sure.

• 
  @flylionАй бұрын

  Thanks to reply, HDMI to mini HDMI version 2.1 backwards compatible and I subscribed you

• 
  @davidlifshitzyaffe3093 ай бұрын

  part list!!!!

• 
  @davidlifshitzyaffe3093 ай бұрын

  hi i was wondering if i can get the part list for your FlyLion 85 drone

• 
  @flylion3 ай бұрын

  Dear Refer to This link flywoo.net/products/flylens-85-hd-o3-2s-brushless-whoop-fpv-drone And I subscribed your channel

• 
  @ckpinfo3 ай бұрын

  Halo bro, kamu punya load file yang kamu upload menggunakan CLI ? Aku sangat butuh itu please 🙏

• 
  @flylion9 күн бұрын

  I apologize for my late reply. Here is the official site for the file you are looking for and I just subscribed to your channel www.happymodel.cn/index.php/2023/05/05/default-factory-dump-file-for-mobula8/

• 
  @daich3 ай бұрын

  crack it open and easy fix

• 
  @yeshesi-yt1vi3 ай бұрын

  Bro you are a life saver. My pavo pico was not working and thanks to you I fixed it through betaflight. Thanks so much

• 
  @josecortez26874 ай бұрын

  Esc config doesn't find my esc 1 2 3 and 4 do you know why that would happen?

• 
  @juanmlechuga4 ай бұрын

  Thanks!!!

• 
  @jester95364 ай бұрын

  Do you know how to setup the vtx?

• 
  @MiDZi0244 ай бұрын

  Hi, this will be good settings for my mobula 8 uart elrs ? (I mean the pid tuning )

• 
  @xjuanhcx14 ай бұрын

  Can you share your betaflight profile ? 🥺

• 
  @flylion3 ай бұрын

  Hi here is kzread.info/dash/bejne/Zaiiw9aHYK7Qgps.htmlsi=Cce_ZE3QRwMGwtHS

• 
  @xjuanhcx14 ай бұрын

  Can you share your betaflight profile ? 🥺

• 
  @flylion2 ай бұрын

  Refer to kzread.info/dash/bejne/Zaiiw9aHYK7Qgps.htmlsi=Dt9XMJsgVlO8A_4X

• 
  @xjuanhcx14 ай бұрын

  Please upload the file 🥺

• 
  @Fearless_Flyer4 ай бұрын

  Sick man

• 
  @flylion2 ай бұрын

  😂 I subscribed you

• 
  @Fearless_Flyer2 ай бұрын

  @@flylion likewise, bro

• 
  @UBaseGames5 ай бұрын

  any way to setup vtx in betaflight on this board? //uart 6 as irc tramp

• 
  @jester95364 ай бұрын

  Did you find out how to set up the vtx?

• 
  @UBaseGames4 ай бұрын

  uart 6@@jester9536