Пікірлер

• 
  @alexross98067 күн бұрын

  If you have a cracked wing and loose neck ist that fixable with parts

• 
  @polishvader15 күн бұрын

  I bought that exact kit from a local hobby shop for $80. So happy with it. I have done some customizing with the interior (custom wallpaper for the different rooms in the cabin etc) and am in the process of changing the lighting to show off the interior better.

• 
  @sandal_thong8631Ай бұрын

  It wasn't just that Lennier left Sheridan to die (which was out of character), but that as a leading member of the Religious Caste, expected by Delenn to be her successor on the Grey Council, that he didn't atone for what he did, but instead ran away. I think at some point he joined the Rangers, which could have been the reverse of Neroon who said his heart was Religious, so Lennier might have felt his heart was Warrior.

• 
  @weebus-dweebus9448Ай бұрын

  Mothra is a girl tho

• 
  @stevencooper3992 ай бұрын

  Garibaldi and Doc Franklin as well ...:(

• 
  @xTGRxREAPER2 ай бұрын

  Where can i get this model?

• 
  @thomaswalker92772 ай бұрын

  I'm glad I found your videos. I am about to embark on this exact same project. And I was thinking of printing it 150% scale. I might still do that, but I'm having 2nd thoughts. For the joints, you can add some sandable glue to the ball joints. Then lightly sand it smooth, and it should tighten up the joints.

• 
  @pimuce3 ай бұрын

  Very lucky to have those old vintage robots very hard to find now and becomes so expensive. I got sun Vulcan with popy Italian box,goggle v,bioman with French box,great v and Dynaman in godaikin box

• 
  @justinsluck3 ай бұрын

  I've been a long time viewer over the views, but hadn't seen your channel in quite some time. I'm sorry to hear about the divorce. What is your vlog channel name?

• 
  @robertmunoz75432 ай бұрын

  When you find new channel name you let me know too!😳 Jman

• 
  @smpleleo3 ай бұрын

  I recently broke up with my fiancé and we had a bad break up. I stayed in the apartment without her for about 2 months and I had to move the left over furniture and rearrange it. Part of it was so I didn’t feel horrible every time i walked through the door. Mainly so that I could feel like my life was going in a different direction that I would be okay with. She also left a mess for me to clean up after. Granted she did take care of a good bit of her things but a lot was still left and it was a big burden to move out all those things.

• 
  @smpleleo3 ай бұрын

  Sorry that things didn’t work out. I hadn’t tuned in in a while but I’m glad things are moving forward for you. What’s your vlog channel btw???

• 
  @xxnike0629xx4 ай бұрын

  Thanks for another update.

• 
  @rx-105xigundam24 ай бұрын

  @xxnike0629xx any updates regarding your BOX fort?

• 
  @rx-105xigundam24 ай бұрын

  @xxnike0629xx or if you plan to restart your all-out anti-G-Reco crusade?

• 
  @rx-105xigundam24 ай бұрын

  @xxnike0629xx or maybe no? Because you are still too ...

• 
  @rx-105xigundam24 ай бұрын

  @xxnike0629xx too Charlie Oscar Whiskey Alpha Romeo Delta Lima Yankee to do it again LUL

• 
  @dansgaragedoorrepairandser10985 ай бұрын

  Poor product. I thought I'm stupid and don't know how to use them but this a disaster product.

• 
  @cabellism5 ай бұрын

  Daaaam!

• 
  @badgrendels5 ай бұрын

  It is a large boy....

• 
  @dominickjillian63445 ай бұрын

  *Promo sm*

• 
  @JAMScale6 ай бұрын

  That's one pricey grill and one big model!

• 
  @badgrendels5 ай бұрын

  It sure is, and I am not sure I want to tear that car apart to fix it myself or find someone else to do so

• 
  @N3XUS66 ай бұрын

  Hey, Happy to see you posting again. Life can definitely throw curve balls at us sometimes, just remember all of us go through ruff times, but this is how we learn and and evolve. Take care brother…now is the time to focus on our health! I love building these models and I’m glad people like you exist to share the enjoyment!

• 
  @Francis3620036 ай бұрын

  Nice to see and hear from you again

• 
  @cobrawingman6 ай бұрын

  you might like to look into recycling your failures and make your own fillament. fun house hold ... sounds of kids ... kids help when you're down, gives you something to hold on to. when i spirialled, it helped having my daughter around and a support network

• 
  @xxnike0629xx6 ай бұрын

  Kids will be kids...

• 
  @rx-105xigundam26 ай бұрын

  @xxnike0629xx Suiton will gonna Suiton

• 
  @rx-105xigundam26 ай бұрын

  @xxnike0629xx in other news, G-Reco will have a decade anniversary this year

• 
  @rx-105xigundam26 ай бұрын

  @xxnike0629xx will you gonna restart your all-out anti-G-Reco crusade?

• 
  @rx-105xigundam26 ай бұрын

  @xxnike0629xx or not? Because you are still too ...

• 
  @rx-105xigundam26 ай бұрын

  @xxnike0629xx too Charlie Oscar Whiskey Alpha Romeo Delta Lima Yankee to do it again

• 
  @13aceofspades136 ай бұрын

  Been a long time since I have seen you, hope you are doing well!

• 
  @osbaldorodriguez65766 ай бұрын

  Which silver from what manufacturer did you use?

• 
  @badgrendels6 ай бұрын

  Basic pla from Bambu labs

• 
  @munchkinmodelingman72GAM26 ай бұрын

  you're a good father. they will remember when they get older.

• 
  @cobrawingman6 ай бұрын

  lets see this at a model comp

• 
  @badgrendels6 ай бұрын

  That would be something....

• 
  @aristedes94496 ай бұрын

  I find it curious how you avoid saying the names of either of these models. I presume it's so the STL source doesn't get in trouble.

• 
  @badgrendels6 ай бұрын

  Gurren Logan is a free download, so I am assuming there is no copyright issues with it. As for the Atomic Dragon, that is the name of the file that I am printing from. It would be easier for someone to find if I refer to it that way. It is a Godzilla clone no doubt about it.

• 
  @thegasing6 ай бұрын

  I am new, but I am ready for more

• 
  @badgrendels6 ай бұрын

  Thank you

• 
  @xxnike0629xx6 ай бұрын

  It's fine if you make a mess on the cutting mat. It's what it's for. If you're not making a little mess at least while enjoying your hobby you're not doing it right. It's cheaper and easier to replace a cutting mat has opposed to the actual table/desk. 15:13 I'm still watching. 🙂 It is difficult to not say things like that, but given your situation and the stuff you have to deal with I'm not surprised you would say things like that every now and then. 15:53 That's cool they're getting into video games. Goat Simulator 3 is a surprise though. Hopefully this year you can finally get the house set up and cleaned how you want it. It's been years and with having to watch the kids I'm not surprised it's a very slow process. You'll get there.

• 
  @badgrendels6 ай бұрын

  Thanks

• 
  @rx-105xigundam26 ай бұрын

  @xxnike0629xx yeah, making a mess shouldn't stop you from building a kit again ...

• 
  @rx-105xigundam26 ай бұрын

  @xxnike0629xx instead of spamming wishlists, hoarding boxes ....

• 
  @rx-105xigundam26 ай бұрын

  @xxnike0629xx doing things such as interfering someone's private life ...

• 
  @rx-105xigundam26 ай бұрын

  @xxnike0629xx just like what you did onto a named Gunpla KZreadr years ago ...

• 
  @blueline3086 ай бұрын

  Ok?

• 
  @AirwolfCrazy6 ай бұрын

  I am still watching.

• 
  @badgrendels6 ай бұрын

  Thanks!

• 
  @greyphantom10006 ай бұрын

  John!

• 
  @2spicy4u_lolz6 ай бұрын

  Im genuinelly scared, i searched for mecha godzilla on my computer yesterday and today this video appeared. ITS NOT THE SAME GOOGLE ACCOUNT.

• 
  @SwedDRPlastic7 ай бұрын

  Oh and Marry x-mas btw. oh and the toll used is a metal deburring tool

• 
  @badgrendels6 ай бұрын

  It took me a bit but I did eventually remember.

• 
  @SwedDRPlastic7 ай бұрын

  If you decide not to fix it, give me a shout I'll pay for shipping.

• 
  @badgrendels6 ай бұрын

  A distinct possibility at this point.

• 
  @shadowleader108 ай бұрын

  Hey great video! Do u know how much they go for? Especially dan cougar?

• 
  @nc12378 ай бұрын

  😂😂

• 
  @billwolod74448 ай бұрын

  Thank you for sharing this.. Have a good day !! "May The Force Be With You" 😊

• 
  @petergreen86748 ай бұрын

  Seeing the magnitude of what you are dealing with makes me feel much less daunted about tackling my own maelstrom of clutter!

• 
  @Strato138 ай бұрын

  They kinda look like crude 3d printing.. Pretty cool. I wish they had made the Babylon 5 ships as models, but unfortunately, Star Wars and Star Trek outshine everyone in sci fi in terms of popularity.. I'd love to build an Omega-Class Destroyer. I knw they sell models of them on Ebay, and they are lego-models that come from China at around 200-500$

• 
  @richarddickerson47748 ай бұрын

  Thank you for sharing. I was searching for images of them & came across your video. They're actually almost mint condition. My sister had gotten me both of these in either 1979 or 1980 back when she worked at the mall. Both toys have been gone for several years.

• 
  @redshirtmodels57578 ай бұрын

  Which Bamboo printer is it?

• 
  @Humbertusmarius8 ай бұрын

  Those nylon parts are a remnant of the early days when this model consisted of two vacu-formed halves, which included the control gondola. I built one in the mid-1970s and it was a pain to line them up, even with the provided internal strengtheners, which were vacu-formed too. Glad to see they reworked it into an actual styrene, kit, but it still wasn't very accurate.

• 
  @xxnike0629xx8 ай бұрын

  Very cool

• 
  @rx-105xigundam28 ай бұрын

  @xxnike0629xx its BOX would be a nice addition to your BOX fort

• 
  @Dorkyand408 ай бұрын

  Good call John. I’ve been looking hard at this one for a few months. Just not sure if I print enough anymore. Good to see you uploading again. Take care

• 
  @billwolod74449 ай бұрын

  Thank you for sharing this. Have a good day !😉

• 
  @GearsMcTinkersome9 ай бұрын

  Regards from ModelManTom! I had 22" Eagles on my mind and saw an oldie of yours. And here in the last 24hrs you post this in the last 6 months. Serendipity.

• 
  @petergreen86748 ай бұрын

  Tom! Serendipity indeed, I was chatting to Lou Dalmaso when he visited London UK this weekend about inactive modelling channels I used to watch - and here you are! Glad to know you're OK, you stopped posting videos so abruptly I was concerned. Is the ModelmanTom channel permanently defunct or is there a possibility of more content in the future? (Did you ever finish the Jupiter II?)

• 
  @JAMScale9 ай бұрын

  Great to see you back.

• 
  @andytrewin9 ай бұрын

  Great to see back on the channel. KR AndyT(UK)

• 
  @rx-105xigundam29 ай бұрын

  Been a long time ...

• 
  @Greybeard20129 ай бұрын

  Isn't this the same update from 2 years ago?

• 
  @robertmunoz75432 ай бұрын

  Did seem familiar!🤔 Jman

• 
  @xxnike0629xx9 ай бұрын

  Thanks for another update. Yea I can understand why you would want to remove things in the house that would remind you of your Ex. Honestly, I'm still surprised you guys went through a divorce. I assumed things were fine.

• 
  @rx-105xigundam29 ай бұрын

  @xxnike0629xx will there be an update of you building a kit again?

• 
  @carrieocvirek774110 ай бұрын

  i really enjoyed this