Пікірлер

• 
  @asadquayum6847 сағат бұрын

  how long did you keep it for in the end

• 
  @totome220620 сағат бұрын

  I replace this turbo seal every 2 years, it costs a few € at ME dealer or at AliExpress. I have 250000km and still the original oil cooler, never add oil between regular oil change.

• 
  @AXHMRКүн бұрын

  GTR grill, or a blacked out diamond grill? I’m stuck.

• 
  @co.creator.productions2 күн бұрын

  It's probably one of the better videos done on a car job. Thank you for being thorough and anticipated what question we may have and walking us through it. Now, let's hope this is what needs to be done for code 0720 0721. Do you know if those are the codes you got too?

• 
  @mrixКүн бұрын

  Hello and thanks, one of the biggest parts of the job is simply removing the wheel arch protectors but you never see that side added in videos, regarding the codes in all honesty I cannot remember what the error codes were, something I should of added to the video at the time.... all the very best fixing yours....mrix

• 
  @Eaves19795 күн бұрын

  What were your symptoms of this?

• 
  @mrix4 күн бұрын

  Hello, I have had a rumbling on the engine for quite some time and it was possible to be the transmission mount, after fitting the New mount it never fixed the rumble so I can only assume now its likley more to be the main front engine mounts, however I am pleased to of changed transmission as it was worn etc..... mrix

• 
  @Eaves19794 күн бұрын

  @@mrix was the rumbling at any given time. I have a 1 at about 1500 Rev sometimes

• 
  @mrix4 күн бұрын

  Hi, its mainly when starting off in low gears so could be around 1500 revs, even the tick over when waiting at a stop creates vibration, when travelling along a motorway everything is perfectly find and smooth, I will need to do the engine mount check whereby you place the car in gear at standstill while pressing the brake and gently increase the accelerator etc to see if there is movement with the engine.

• 
  @SrinivasRadaram5 күн бұрын

  I have a 62 plate E220 and yesterday while driving I could hear some noise and on breaking I could sense car go zigzag so I took it to mechanic today and he said the rear subframe is damaged due to corrosion. Can you pls let me know how do I go ahead from here? Which template should I fill etc. to get this sorted from MB?

• 
  @mrixКүн бұрын

  Hello you should no longer have to worry about a template and simply ask for it to be replaced for Free... Mercedes now have replaced so many for Free including mine its now their obligation to replace yours... you would need to go to a official Mercedes garage / dealership.... all the very best having your replaced.....mrix

• 
  @totome22067 күн бұрын

  I have the same engine. I compared febi, blueprint and hengst all very good, very similar and around 60€. All 3 are made in china, but good quality. I also bought one on AliExpress for 25€, but these were just crap. I change all filters every year!

• 
  @mrix7 күн бұрын

  I think next time around I will opt for the cheaper options, as you say many other brands are very good and do the job.... thanks mrix

• 
  @john84518 күн бұрын

  At last, someone who can use a camera properly even in a confined space! 😁 Cheers dude.

• 
  @mrix7 күн бұрын

  Well thank you good sir...... mrix

• 
  @devilsympathy110 күн бұрын

  Hi, I'm glad I came across your video. This morning I went in for an alignment and I found out that part of the rear subframe sheared off and a control arm was freely hanging from the wheel! Had I not gone in for an alignment I wouldn't have known about it as it was never and issue and never noticed excessive corrosion on the subframe during the MOT. To make matters worse this must have put unimaginable amounts of stress on all other suspension components but I'm happy to be alive to tell. I have called the local dealership and they will inspect it and then contact headquarters. The problem is a serious one and I'm without a car now!

• 
  @mrix9 күн бұрын

  Sorry to hear your now without a car however I am glad to hear nothing far worst had happened, looking on a positive front you now have the garage to sort the mess out which should be fr Free!... all that very best and thanks....mrix

• 
  @devilsympathy19 күн бұрын

  Thank you! I have called them and they will look at it free of charge on Monday the 15th. I'm sure they will keep the car as it will be deemed unsafe until fixed. I'll let you know afterwards on what the outcome is.

• 
  @devilsympathy17 күн бұрын

  @@mrix Update. MB has agreed to change the subframe free of charge. Now waiting for the parts. I forgot to ask if this one is the same as the original or an updated one, silly me 😅 I guess I was too happy when I heard the good news. 😆

• 
  @lazygsxr15 күн бұрын

  I changed mine on a e class 250 driver rear. no lights on dash when started and then running but traction control would almost put can in limp mode once u press the throttle to go and any normal speed like the car thought it was wheel spinning so had to change it back the the one that came out and was fine and back to normal but now get the warning lights ever now and then

• 
  @hctiBelttiL18 күн бұрын

  F it, I'm necroing this because they're still doing it. Why would you even think to ascribe to incompetence that which can be explained by malice? We're talking about a huge corporation here, incompetence is not a possibility. I swapped 2 hard glass screen protectors this month alone because of this design "feature".

• 
  @mrix17 күн бұрын

  Yes shocking after so very long they have not bothered to resolve the issue....mrix

• 
  @Jumpeyuk20 күн бұрын

  why is everything so complicated? I've been changing wipers for 50 years but lately I must watch a video on KZread how to do it? so thank you!

• 
  @mrix20 күн бұрын

  Hello and thanks, Yes you would of thought the process should be self explanatory and so very easy but its not.... mrix

• 
  @nickplenzick260221 күн бұрын

  Another video from a guy whos from Scotland said 8nm for a total touque setting for the pan.

• 
  @ronbrasnell652222 күн бұрын

  Don’t forget to close the door first, I couldn’t do it for ages then I closed the door and it worked.

• 
  @mrix22 күн бұрын

  Interesting tip but if it worked all good.....mrix

• 
  @michaeldimarzio507823 күн бұрын

  Great tip!!!

• 
  @mrix22 күн бұрын

  Thanks and glad to of helped..... mrix

• 
  @Maxton72026 күн бұрын

  Hi thanks for the video. Was it easyer to replace the rear one? My diagnostic says right rear axle rpm sensor mechanical fault

• 
  @mrix25 күн бұрын

  Hello, all my videos are basically jobs on the car I am required to do and mainly for the DiY mechanics among us, presently I have had no issues with the rare sensors so have had no reason to replace them. I assume there is not much difference in the process.... all the very best .....mrix

• 
  @maxxxkraft26 күн бұрын

  Thanks a lot, this is very helpful! The new forks change the geometry quite a bit, right? The new forks seem much longer than the original ones. Also, does the handlebar still fold as nicely as before?

• 
  @mrix25 күн бұрын

  Hi, yes the bike feels a little higher at the front which I dont dislike, its a really relaxed riding style and along with my suspension stem and seat its like riding a couch in comfort, from a cosmetic point of view since the change of the forks we have not known so many people look and stare and state how cool the bikes look, if you purchase one of these bikes you will need to replace the forks if you want more comfortable riding. All the very best...... mrix

• 
  @maxxxkraft25 күн бұрын

  @@mrix Thanks for your quick reply! I already have that bike and changed a few parts, but still have the original forks. I have never changed the forks on a bike, but using your detailed tutorial, I think I'll be able to do it. Could you perhaps tell me whether the two 'pipes' of the new fork interfere with the folding mechanism in some way? Du to the design with the two horizontal bars (hope you know what I mean) they extend further upwards than the original ones. I don't suppose it is a problem for folding, but if it is, there are forks that look more like the original ones and I fold that bike often. Thanks again!

• 
  @maxxxkraft25 күн бұрын

  To answer my own question, I don't think it's a problem for the folding mechanism after looking at it again. I'll report back after changing the fork!

• 
  @SNOW-zl5jp27 күн бұрын

  damn I wish I found this video sooner. Great stuff

• 
  @mrix25 күн бұрын

  Hello and thanks for spending the time to comment, very much appreciated, also very glad to of helped....mrix

• 
  @FINELINEVAN29 күн бұрын

  Taking the wheels off working on flat would be a lot easier

• 
  @mrix28 күн бұрын

  Yes I agree it would make life easier..... mrix

• 
  @ecemava29 күн бұрын

  This oil leak is best fixed installing an oil catch can between the out of the pcv valve and before the turbo intake.

• 
  @mrix28 күн бұрын

  Yes technically a catch can is the way to go, unfortunately on the C350 there is no position to add a catch can in the position you mention, I did attach a catch can but it caused no end of black smoke for whatever reason so decided not to go down that route but I could not add a catch can where you suggested unfortunately.....mrix

• 
  @antikdeela562529 күн бұрын

  set of 4 sensors $48 on Amazon, installed them today. Cleared codes, re-scanned, no DTC's.

• 
  @mrix28 күн бұрын

  Result!.....mrix

• 
  @blizzardsailing8020Ай бұрын

  Thank you so much! Other videos showed snapping it back in, but didn’t point out the fact of it sliding back into the cover and clicking in place. I almost broke mine trying to force it in without releasing it so the clip sticks out past the cover. Much appreciated!

• 
  @mrixАй бұрын

  Very pleased to of helped, all the very best.....mrix

• 
  @AnvilPro100Ай бұрын

  Why are you doing that silly voice?

• 
  @mrixАй бұрын

  Because I do ? sorry to upset and annoy you.....mrix

• 
  @st-bx1cdАй бұрын

  Thanks mate for the informative video!!

• 
  @mrixАй бұрын

  No problem 👍 glad you found it useful....mrix

• 
  @blackhat856Ай бұрын

  Motivation is $$$…BIG PETROLEUM…BUDDY BOYS👽👽👽🛸🛸🛸🇬🇷🇬🇷🇬🇷

• 
  @IsobarBrokenFlameАй бұрын

  Remember to replace both seals. The turbo inlet and PCV seal when replacing the air intakes Y. Also if there is a lot of oil in the turbo, it is worth replacing the PCV value. Not a huge job, you will need a few small tools to get the DPF differential pressure sensor mount off and out of the way.

• 
  @mrixАй бұрын

  Hi, I have replaced the PCV valve with a brand New genuine part and another one from another brand and it never helped at all, the PCV I am sure can no longer cope with older engines and the extra blow by and that`s why many tend to opt for a catch can, however so far so good this end.... mrix

• 
  @IsobarBrokenFlameАй бұрын

  @@mrix that’s unfortunate, some oil blow by is expected but not huge amounts if you are not dumping the throttle. Quick opening and closing of the throttle, does tend to suck up oil from the crankcase

• 
  @nilesdauphney5925Ай бұрын

  Did the brake switch fix your abs light problem? My codes are on staedy with EBD, ABS, and ESC inoperable. Thank you for the video

• 
  @mrixАй бұрын

  Hello, my brake switch never fixed the problem and I was required to replace the wheel speed sensors which I made another video on, I was hoping it was going to be the more easier option but alias not.... mrix

• 
  @Flackadder1000Ай бұрын

  Actually, a really good video that shows that it is never as easy as it appears to be. Or, easy when you know how. Informative. Thanks.

• 
  @mrixАй бұрын

  Hello and thanks for your kind words much appreciated....mrix

• 
  @rorymurray78Ай бұрын

  One question does the badge out of the other grill come out ..and can you put it onto the new grill

• 
  @mrixАй бұрын

  Yes if you want to use the same badge then yes it will fit..... mrix

• 
  @tonyboswell5414Ай бұрын

  Very informative 👍

• 
  @mrixАй бұрын

  Thanks glad you found the video interesting....mrix

• 
  @damianparrish2572Ай бұрын

  Looks grand fella

• 
  @mrixАй бұрын

  Thank you good sir....mrix

• 
  @tarkwellАй бұрын

  My CLS has the corrosion and its going in for inspection at Poole MB on Wednesday, charging me over £100 to look at it. I just hope their "goodwill' covers all the costs in the end.

• 
  @mrixАй бұрын

  If there is the same type of corrosion you should not have to pay at all.... all the best with a positive outcome.....mrix

• 
  @merc3202Ай бұрын

  Just had my 2012 E Class estate rear subframe replaced free of charge. It has a full Mercedes service history and whilst it was in for service in June 2023, they sent a video showing me the hole in the subframe. I was informed parts were on back order and they will call me as soon as one arrives. 10 months later I had to slam on my brakes and the back of the car almost felt detached. At first I thought the front left brake was defective but then realised it could be the subframe. Took it to a local garage and yes the subframe was badly corroded to the point it failed. I called Mercedes who informed me to get it recovered as this will get my car seen straight away. 2 days later my car was ready to be picked up, not a penny to pay but I did opt for them to put under seal on whilst it was in. It’s definitely worth getting it done as it feels like a new car now!

• 
  @mrixАй бұрын

  Obviously your situation could of been very dangerous but on a positive note the sub-frame was replaced very quickly... well as it should of been I suppose.... mrix

• 
  @kalishinkoАй бұрын

  Several German companies sell a replacement silicone T pipe for getting rid of this gasket from the om642. I can't post a link without getting my comment auto-banned by youtube but Google "Repair Kit Intake Mercedes Benz CDI OM642"

• 
  @mrixАй бұрын

  Never heard of that but will do a search with your key words, huge thanks....mrix

• 
  @Havisham1Ай бұрын

  I only have one sensor on the passenger side, is this correct? It's not a dual setup like the driver's side is.

• 
  @mrixАй бұрын

  Exactly that is correct.....mrix

• 
  @Havisham1Ай бұрын

  Thank god for that, had me worried. Now my only issue is finding replacement speed sensor bolts. Plus one of mine is rounded off, guess it's a garage job for one of them.

• 
  @consistencyisthesolution2 ай бұрын

  Is it plastic? The chrome one

• 
  @mrix2 ай бұрын

  Hello, the original was chrome looking as you could see but they are made from some kind of hard plastic material..... mrix

• 
  @youngsod54942 ай бұрын

  How long did it take for you to get yours back? I sent mine in on April 15th and it’s still there lol wondering if I should call them or wait for a call from them ?

• 
  @mrix2 ай бұрын

  Hello, I left mine at my local Mercedes garage for 3 days, they did say it would be 2 days but they run into a few complications but 3 days in total.....mrix

• 
  @LukeSmith-br3nd2 ай бұрын

  Life saver ! Done it myself today

• 
  @mrix2 ай бұрын

  Its a job which is not really that complicated but saves a huge amount of money if you can manage it on your own! glad you found the video useful..... mrix

• 
  @konstantinostselios11292 ай бұрын

  Yes absolutely yesterday I dropped my 2015 e350 rear subframe corroded and almost had an accident here in New York it’s covered under extended warranty they will replace it but my question is the new subframe isn’t going to have the same issue? Few years from now?

• 
  @mrix2 ай бұрын

  That did also cross my mind but we are likely talking another 5 to 10 years before any issues start arising again especially if they do actually use the same sub-frame used originally, mine lasted 9 years and if it lasted another 9 personally I have no issues ...... mrix

• 
  @danieljoseph4672 ай бұрын

  Mine has similar reactions to yours.

• 
  @davefrancis72132 ай бұрын

  Is the oil on it from a split boot leaking on to the abs ring? Iv got the same issue with the warning lights on the dash. Hoping I don’t have to replace the ring to lol. Thanks

• 
  @mrix2 ай бұрын

  I guess your always going to get a certain amount of muck and oil being in the wheel and brakes area being there for over 5 years....mrix

• 
  @davefrancis72132 ай бұрын

  @@mrix Iv solved the problem. I was looking to deep into it lol. I full locked the steering from left to right and felt it was stiff then the issue cleared up. Maybe an air bubble in the steering fluid. Who knows just a glitch maybe lol

• 
  @kraut-performance2 ай бұрын

  This wasn't a good idea... Maybe you should have switched the crank case breather valve instead. 😉

• 
  @mrix2 ай бұрын

  Hi on these engines I am sure its clear to many that the crankcase breather no longer works, it may of been suitable on the engine when it was New but its clear it cannot cope with the amount of blow by you get with a older engine, I have replace the crack case breather twice now and I can assure you its not going to help on these aged engines, you stop the blow by oil by using my method or a catch can.... nothing else will help.... mrix

• 
  @thedieiscast97292 ай бұрын

  I used this product ( the petrol version) when my car failed its test. The mechanic said it was time for a new catalytic convertor. I used the product just as it said in the instructions. Went for a retest and passed without any problems.

• 
  @mrix2 ай бұрын

  Interesting, something to keep in my when a catalytic converter is mentioned for re-newel...... thanks mrix

• 
  @KingSB1872 ай бұрын

  Great video mate

• 
  @mrix2 ай бұрын

  Thanks much appreciated....mrix

• 
  @user-iw4vx3dq9q2 ай бұрын

  Quick way to do it is book it in for a rear subframe inspection and they will see it needs changing and they contact Mercedes in Germany for authorisation to carry out the work and it will be free

• 
  @mrix2 ай бұрын

  Yes it should be a far easier and quicker process now..... mrix

• 
  @user-iw4vx3dq9q2 ай бұрын

  Dave Evan’s helped me get mine done too.free of charge 🎉

• 
  @mrix2 ай бұрын

  Glad to hear that, it was him who started me on my journey to getting my Free subframe done..... mrix

• 
  @raymensah10832 ай бұрын

  I’m taking mine to Liverpool Mercedes on Saturday 27th April 2024 , I’ll let you know how I get on

• 
  @mrix2 ай бұрын

  Thanks and all the very best of luck with a positive outcome....mrix

• 
  @AchintSharma2 ай бұрын

  Hey, the ulanzi case engraves the GoPro and leaves a bad mark on it, is there a solution for it?

• 
  @mrix2 ай бұрын

  Hi, when I was using the case I never had the problem so I cannot help unfortunately.... all the best mrix

• 
  @AchintSharma2 ай бұрын

  @@mrix oh I believe I have an older version of the case, thanks for the response though, appreciate the message.

• 
  @janehopley16113 ай бұрын

  Mine is going in tomorrow- it snapped, which was scary because I drive up and down the motorway everyday

• 
  @mrix3 ай бұрын

  Now that is the most extreme thing I have heard to date... I dont think there should be any issue of replacing for Free in that situation... all the best ...mrix

• 
  @janehopley16113 ай бұрын

  @@mrix tbh I kept hearing a knocking noise when I went over a bump- thought of it my shocks- took it to my mechanic- nooooo it’s the subframe- you can’t drive it!!!! Tow truck booked to take it to Mercedes tomorrow

• 
  @Frol3R3 ай бұрын

  Thanks for tour effort. Did gréat. Bought a 100 000 km w204, after 2000 km, this shut happened. Nevers happened on my french and japanese car or m'y skoda. Shame for such a quality brand. Never Mercedes agaib for me cause it's poor quality and expensive price tag

• 
  @mrix3 ай бұрын

  Thanks for your feedback, I was quoted many hundreds for the garage to do the job and for me it was pretty much around the £100 in total doing the job myself... I am also a little disappointed in a car I thought was meant to be a quality brand.....mrix