For me, Schuyler is much more readable and easier on my eyes than an Allan and Cambridge. Although the font I have is either 10 or 11.
@chien-shengtsai8626Ай бұрын
Thanks for demonstrating. I just bought one, didn't know how to use it, so I found your video. Going to use it to remove clips for my Volvo A/C repair.
@gothickingroachjfs5677Ай бұрын
Hey just wanted to thank you so much, I have a reflector on the bottom of my bumper that's been loose and driving me crazy ever since I got my car 2 months ago. When I would unscrew the T screws it wouldn't budge. I have it off and tightening that reflector down!
@adrianlaverick80402 ай бұрын
You're not wrong, the Epiq series is clearly the best made box out there. Other companies make nice boxes, but they are typically just as expensive, and a lot are not 30in deep, or not as heavy duty. Talking with apprentices and helpers in the shop, I try to find out if they want to do this long term before suggesting snap on to them. If this is just a job for them for a time, get a US general box, if it's a career, buy a name brand box. I work in heavy equipment, tooling gets HEAVY very fast. Ease of replacement parts and warranty is important to me, for the guys that are gonna do this long term, and want to tool up very heavy (we have the luxury of a well stocked tool room so many people just borrow the bigger stuff from the tool room) absolutely go out and get a name brand box. Nothing else will take the weight of our 3/4 and 1in drive tools, 1.5-2+ in wrenches as well as an epiq will.
@j.dieason75272 ай бұрын
Nice bibles… all of them are wonderful
@jacobstacy5883 ай бұрын
I like snap on boxes there nice but I’ll always have a matco 6s I have the longest and deepest single box on the market Mr big and xl are more than one box put together by my 6s is 87 inches long 31 inches deep them extra inches do help a lot in depth
@CountryMileGarage3 ай бұрын
Have pride in what you do and it shows. Nothing wrong with taking care of your stuff that makes you money everyday. I agree with the 3 categories
@CountryMileGarage3 ай бұрын
Have pride in what you do and it shows. Nothing wrong with taking care of your stuff that makes you money everyday. I agree with the 3 categories
@proverbs91033 ай бұрын
The best thing about any Bible is not the covers or the paper it's the words that matter 😊
@BA-pz3lo5 ай бұрын
i dont know why they cover up the screw driver holes like that with the mat. then you have to cut the mat? very strange 🧐🤔
@megalyon5 ай бұрын
Thanks for sharing, this is a great watch for anyone looking for a premium KJV 😁
@Greeko_Poloz6 ай бұрын
I can fix a lot of stuff on my own car. Not that, that is crazy.
@vc97326 ай бұрын
This is what made me give up my 89 Ford Taurus! 😢 I loved that car and wish I could find one now.
@Chopppaa7_6 ай бұрын
Mane I’ve worked on cars and replaced blower motors but damn the whole dashboard Dawg I know u had a beer after work
@kevindrye6 ай бұрын
That car goes to the junkyard with that problem.
@snapontoolreview6 ай бұрын
I agree it should
@1apart5177 ай бұрын
Americans are so spoiled.
@omarguzman63987 ай бұрын
Bro, I can hear you breathe, hella loud
@JohnTaylor-bd1uy9 ай бұрын
Good video brother! God bless!!!
@fishersofmen47279 ай бұрын
You nailed it! Cambridge has the best insides, Allen the best outside, and Schyuler is the most balanced. Honestly if Schuyler had more of a classic font I would say they are the best(and if they would take the Jerusalem cross of the cover, just personal preference.) I remember when Schyuler first started they did a TBS Westminster reference Bible clone and it looked awesome, but sadly they don't do that anymore. If you ever want to try something different but still classy try the Clarion from Cambridge, didn't think I would like it, the covers are nice but could be better, but they layout has become my favorite(my Allen 43 and 63 are tied with it for first tho)... Just make sure you get a 2016 or newer version that has the better paper, most goatskin versions have it.
@snapontoolreview9 ай бұрын
I agree about the Jerusalem cross.
@trentgilliam51926 ай бұрын
I’m not a fan of the Jerusalem cross either. I’m not even exactly sure why. I just don’t prefer it. That’s why I’ve never bought a Schyuler.
@jdc12645 ай бұрын
You guys really need to stop complaining about the cross
@jcoul1sc9 ай бұрын
Yes you can see spot welds as you move camera. Lid is solid
@gcfcos10 ай бұрын
Wow What a set up! Beautiful collection
@aedwards449611 ай бұрын
Shame you didn't actually show us how to remove the bumper. Maybe next time??
@Imsaved777 Жыл бұрын
Cambridge all the way!
@paulsouders3489 Жыл бұрын
How do you get that sticker for your hutch My snap on guy said it must be something custom Cause I tried to order one for my hutch I ordered the one for the roll cart
@snapontoolreview Жыл бұрын
It is custom
@danielgeng2306 Жыл бұрын
I kind don’t like that there is no barrier between the crow bar/screwdriver holes which is probably why they didn’t cut the holes out, I can picture all of my 10mm sockets disappearing down those holes ! Lol
@keithehopkins Жыл бұрын
Thank you didn’t know about tail light nuts
@twostroke12v71 Жыл бұрын
Commenting on the video for the algorithm
@theyoungsg2054 Жыл бұрын
Would u be able to show us how to take out the pins without breaking the teeth?
@Stay_Zero13 Жыл бұрын
How did you mount the tv? And what size in inches is the tv
@snapontoolreview Жыл бұрын
Used a small low profile tv mount. I believe it's a 27" tv
@MidwestToolReview Жыл бұрын
Hi Tim, I love your setup so much that I had to binge on your vids!!
@christopherlastname7638 Жыл бұрын
I spent a lot of money on my tools they pay the bills I keep the clean and in there place ! I buy snap on tools made in America by American workers like me and you
@jesseochoa5964 Жыл бұрын
Just got mine last week and I took that top mat and hole punched all the holes out then put the plastics in holding down the mat. Came out really nice.
@saulsvt6828 Жыл бұрын
Can you show more details on how you mounted the tv. And what size it is. I like how clean it looks
@tspugsley39 Жыл бұрын
What size is the monitor? I’m wanting to do the same thing but 32” looks like it might be too big to fit between the lid struts. The next option was 24” which would fit but obviously want as big a screen as possible lol
@snapontoolreview Жыл бұрын
The one in the video is I believe an odd size. I want to say it was a 28 or 29 inch. I have since replaced it with a 24 inch. And find it to be just fine. If you can find a a 32 with very little border trim I believe it would work.
@tspugsley39 Жыл бұрын
I ended up finding a 32” Samsung that worked great! Had to switch the struts to the outside of the mounts but no big deal there. Thanks for the idea!
@spencermaiers8322 Жыл бұрын
I would like to make a simple comment just to mention that the Mueller Kueps clip lifter kit (5pcs and 3pcs long) tools are very nice. Mueller also sells a fuse plier that works well for certain small head trim clips as well. I'd like to test those Steck pliers. They look very nice. Frankly to do almost perfect work for clips, you'd probably have to invest in several tools for trim! I also like the miniature Stahlwille lever bar with the green handle. It has a little "spoon" tip and SUPER thin and seems very strong. Really helpful for damage free removal and or starting of extremely tight low tolerance interior trim pieces. Scuffing these tight tolerance high dollar european cars pieces can start to feel a little shabby, mistakes happen and some marring is unavoidable. Hot tip - A small piece of sticky tape or dumdum (butyl tape) works well to start screw bolt covers (door panels, etc) where there's basically absolutely no way to remove the plug cover without scuffing or wedging the piece out. It's fun to try to make it look like you were never there when doing these types of repairs. We've all seen dozens of "whatever screwdriver was available" to remove the trim cover. And sometimes that's the best solution! Best regards
@georgesolano4679 Жыл бұрын
What did you use to hang the monitor/tv on the cart.
@snapontoolreview Жыл бұрын
I used a cheap low profile tv wall mount from Walmart. There are 2 threaded holes in lid to mount to.
@georgesolano4679 Жыл бұрын
@@snapontoolreview thanks 🙏
@2wrdr Жыл бұрын
How about metal u-shaped spring clips, the types which dig into the plastic. Somehow the metal pin(sort of) must be retracted or entire clip somehow spread very wide to release the grip. Would love to know how others do it.
@jacobgarcia4617 Жыл бұрын
What’s the part number for the top on the other tool cart ?
@snapontoolreview Жыл бұрын
JKRR33W55A
@craigspeirs6639 Жыл бұрын
Put a couple drops if oil on draw slides it helps, i use 3 n 1. oil
@antoniofalise3282 Жыл бұрын
Did you get the bluepoint service kit off the snap on truck ??? My snap on guy never has any full sets like that!
@snapontoolreview Жыл бұрын
I bought that set from a pawn shop
@kipmitchell7288 Жыл бұрын
So funny story I own that cart now
@sphdg Жыл бұрын
Sick set up. Not a fan of the TV inside the box. lol. But to each there own.
@armandocastro4548 Жыл бұрын
Tim, how many premium Bibles do you have? just curious... Also, thanks so much for your review. I agree that Allen is the best when it comes to the quality of the leather and Cambridge has this readability that I don't see in other Bibles. Schuyler is also great.
@snapontoolreview Жыл бұрын
Currently 6.
@Randy12902 жыл бұрын
You ever drop anything on those side prybar holes?
@snapontoolreview Жыл бұрын
No I never had
@LHRtoJFKconcorde2 жыл бұрын
Great video/review. I'm with you 100%... Often disappointed that if I want the premium features; I have to get the large or extra large version; case in point here. 40"x30" is flat out too big for me. $5k+ is the last nail in the coffin. I'm looking for more portable and smaller footprint; ~ 32"x20". Looks like SO has the only one that is not an import. So, I'll probably save a little longer and get that. Might look into upgrading/retrofitting to Epic or Cornwell slides and casters. Probably also get a cabinet shop make fit a stainless steel [overlay] top. @Cornwell tools: If you listening; I wish you would make the Platinum cart in 32"x20". Maybe I'm not the only one?
@snapontoolreview Жыл бұрын
I have to agree. A premium cart in a smaller foot print.
@shirley97802 жыл бұрын
Hello, I am a supplier of auto clips from China. Do you need auto clips or removl tools?
@sistercalhoun44442 жыл бұрын
Yes for Honda vehicles new models? Push pin clip removal tool for the Honda vehicles.
@paulsouders34892 жыл бұрын
I wish there was a krl Version cart with the nice casters wheels just under the epic i dont like those cheapy looking wheels lol
@jacobstacy5882 жыл бұрын
I work in a 4 bay shop so I don’t really need a big roll cart that one plus but when we’re busy you wish you had more room in the shop we got 3 twin post lifts and 1 alignment rack
@donaldpainter9562 жыл бұрын
Shop tools are always abused and get used by people that don't know how to use them and don't care how they treat them that's why I buy my own shop tools
@and0pand02 жыл бұрын
That cart isn't close to being full.. I dunno man kinda think you're blowing some cash
Пікірлер
For me, Schuyler is much more readable and easier on my eyes than an Allan and Cambridge. Although the font I have is either 10 or 11.
Thanks for demonstrating. I just bought one, didn't know how to use it, so I found your video. Going to use it to remove clips for my Volvo A/C repair.
Hey just wanted to thank you so much, I have a reflector on the bottom of my bumper that's been loose and driving me crazy ever since I got my car 2 months ago. When I would unscrew the T screws it wouldn't budge. I have it off and tightening that reflector down!
You're not wrong, the Epiq series is clearly the best made box out there. Other companies make nice boxes, but they are typically just as expensive, and a lot are not 30in deep, or not as heavy duty. Talking with apprentices and helpers in the shop, I try to find out if they want to do this long term before suggesting snap on to them. If this is just a job for them for a time, get a US general box, if it's a career, buy a name brand box. I work in heavy equipment, tooling gets HEAVY very fast. Ease of replacement parts and warranty is important to me, for the guys that are gonna do this long term, and want to tool up very heavy (we have the luxury of a well stocked tool room so many people just borrow the bigger stuff from the tool room) absolutely go out and get a name brand box. Nothing else will take the weight of our 3/4 and 1in drive tools, 1.5-2+ in wrenches as well as an epiq will.
Nice bibles… all of them are wonderful
I like snap on boxes there nice but I’ll always have a matco 6s I have the longest and deepest single box on the market Mr big and xl are more than one box put together by my 6s is 87 inches long 31 inches deep them extra inches do help a lot in depth
Have pride in what you do and it shows. Nothing wrong with taking care of your stuff that makes you money everyday. I agree with the 3 categories
Have pride in what you do and it shows. Nothing wrong with taking care of your stuff that makes you money everyday. I agree with the 3 categories
The best thing about any Bible is not the covers or the paper it's the words that matter 😊
i dont know why they cover up the screw driver holes like that with the mat. then you have to cut the mat? very strange 🧐🤔
Thanks for sharing, this is a great watch for anyone looking for a premium KJV 😁
I can fix a lot of stuff on my own car. Not that, that is crazy.
This is what made me give up my 89 Ford Taurus! 😢 I loved that car and wish I could find one now.
Mane I’ve worked on cars and replaced blower motors but damn the whole dashboard Dawg I know u had a beer after work
That car goes to the junkyard with that problem.
I agree it should
Americans are so spoiled.
Bro, I can hear you breathe, hella loud
Good video brother! God bless!!!
You nailed it! Cambridge has the best insides, Allen the best outside, and Schyuler is the most balanced. Honestly if Schuyler had more of a classic font I would say they are the best(and if they would take the Jerusalem cross of the cover, just personal preference.) I remember when Schyuler first started they did a TBS Westminster reference Bible clone and it looked awesome, but sadly they don't do that anymore. If you ever want to try something different but still classy try the Clarion from Cambridge, didn't think I would like it, the covers are nice but could be better, but they layout has become my favorite(my Allen 43 and 63 are tied with it for first tho)... Just make sure you get a 2016 or newer version that has the better paper, most goatskin versions have it.
I agree about the Jerusalem cross.
I’m not a fan of the Jerusalem cross either. I’m not even exactly sure why. I just don’t prefer it. That’s why I’ve never bought a Schyuler.
You guys really need to stop complaining about the cross
Yes you can see spot welds as you move camera. Lid is solid
Wow What a set up! Beautiful collection
Shame you didn't actually show us how to remove the bumper. Maybe next time??
Cambridge all the way!
How do you get that sticker for your hutch My snap on guy said it must be something custom Cause I tried to order one for my hutch I ordered the one for the roll cart
It is custom
I kind don’t like that there is no barrier between the crow bar/screwdriver holes which is probably why they didn’t cut the holes out, I can picture all of my 10mm sockets disappearing down those holes ! Lol
Thank you didn’t know about tail light nuts
Commenting on the video for the algorithm
Would u be able to show us how to take out the pins without breaking the teeth?
How did you mount the tv? And what size in inches is the tv
Used a small low profile tv mount. I believe it's a 27" tv
Hi Tim, I love your setup so much that I had to binge on your vids!!
I spent a lot of money on my tools they pay the bills I keep the clean and in there place ! I buy snap on tools made in America by American workers like me and you
Just got mine last week and I took that top mat and hole punched all the holes out then put the plastics in holding down the mat. Came out really nice.
Can you show more details on how you mounted the tv. And what size it is. I like how clean it looks
What size is the monitor? I’m wanting to do the same thing but 32” looks like it might be too big to fit between the lid struts. The next option was 24” which would fit but obviously want as big a screen as possible lol
The one in the video is I believe an odd size. I want to say it was a 28 or 29 inch. I have since replaced it with a 24 inch. And find it to be just fine. If you can find a a 32 with very little border trim I believe it would work.
I ended up finding a 32” Samsung that worked great! Had to switch the struts to the outside of the mounts but no big deal there. Thanks for the idea!
I would like to make a simple comment just to mention that the Mueller Kueps clip lifter kit (5pcs and 3pcs long) tools are very nice. Mueller also sells a fuse plier that works well for certain small head trim clips as well. I'd like to test those Steck pliers. They look very nice. Frankly to do almost perfect work for clips, you'd probably have to invest in several tools for trim! I also like the miniature Stahlwille lever bar with the green handle. It has a little "spoon" tip and SUPER thin and seems very strong. Really helpful for damage free removal and or starting of extremely tight low tolerance interior trim pieces. Scuffing these tight tolerance high dollar european cars pieces can start to feel a little shabby, mistakes happen and some marring is unavoidable. Hot tip - A small piece of sticky tape or dumdum (butyl tape) works well to start screw bolt covers (door panels, etc) where there's basically absolutely no way to remove the plug cover without scuffing or wedging the piece out. It's fun to try to make it look like you were never there when doing these types of repairs. We've all seen dozens of "whatever screwdriver was available" to remove the trim cover. And sometimes that's the best solution! Best regards
What did you use to hang the monitor/tv on the cart.
I used a cheap low profile tv wall mount from Walmart. There are 2 threaded holes in lid to mount to.
@@snapontoolreview thanks 🙏
How about metal u-shaped spring clips, the types which dig into the plastic. Somehow the metal pin(sort of) must be retracted or entire clip somehow spread very wide to release the grip. Would love to know how others do it.
What’s the part number for the top on the other tool cart ?
JKRR33W55A
Put a couple drops if oil on draw slides it helps, i use 3 n 1. oil
Did you get the bluepoint service kit off the snap on truck ??? My snap on guy never has any full sets like that!
I bought that set from a pawn shop
So funny story I own that cart now
Sick set up. Not a fan of the TV inside the box. lol. But to each there own.
Tim, how many premium Bibles do you have? just curious... Also, thanks so much for your review. I agree that Allen is the best when it comes to the quality of the leather and Cambridge has this readability that I don't see in other Bibles. Schuyler is also great.
Currently 6.
You ever drop anything on those side prybar holes?
No I never had
Great video/review. I'm with you 100%... Often disappointed that if I want the premium features; I have to get the large or extra large version; case in point here. 40"x30" is flat out too big for me. $5k+ is the last nail in the coffin. I'm looking for more portable and smaller footprint; ~ 32"x20". Looks like SO has the only one that is not an import. So, I'll probably save a little longer and get that. Might look into upgrading/retrofitting to Epic or Cornwell slides and casters. Probably also get a cabinet shop make fit a stainless steel [overlay] top. @Cornwell tools: If you listening; I wish you would make the Platinum cart in 32"x20". Maybe I'm not the only one?
I have to agree. A premium cart in a smaller foot print.
Hello, I am a supplier of auto clips from China. Do you need auto clips or removl tools?
Yes for Honda vehicles new models? Push pin clip removal tool for the Honda vehicles.
I wish there was a krl Version cart with the nice casters wheels just under the epic i dont like those cheapy looking wheels lol
I work in a 4 bay shop so I don’t really need a big roll cart that one plus but when we’re busy you wish you had more room in the shop we got 3 twin post lifts and 1 alignment rack
Shop tools are always abused and get used by people that don't know how to use them and don't care how they treat them that's why I buy my own shop tools
That cart isn't close to being full.. I dunno man kinda think you're blowing some cash
all drawer all empty no space efficient lol