Пікірлер

• 
  @CorranHorn_R93 күн бұрын

  You know as I'm watching this, it just occured to me. With your passion for teaching, have you ever considered teaching shop class?

• 
  @smerkin50003 күн бұрын

  Kind of. A few years ago while I was in childcare I realised I had no interest in all the planning and paperwork that is involved in being a teacher.

• 
  @bitfighterrosemoor7978 күн бұрын

  You did a great job on the stop motion, well done. I like that you do the really old LEGO sets

• 
  @smerkin50008 күн бұрын

  Thanks, glad you enjoyed it

• 
  @heighRick8 күн бұрын

  That's a cool set! Thanks Smerkin, helps a lot

• 
  @smerkin50008 күн бұрын

  It was one of my favourites 😊

• 
  @andrewb95909 күн бұрын

  I still have mine.

• 
  @smerkin50009 күн бұрын

  Noice

• 
  @DavidGarciaSMD11 күн бұрын

  Can you connect more than 2 mics to one receiver?

• 
  @smerkin500011 күн бұрын

  Not that I’m aware of as when the mics connect to the receiver one is the left channel and the other is the right channel, or they can also be mixed together as mono.

• 
  @heighRick15 күн бұрын

  Ah, propping up the rear axle and switching to the Gun/Torch pieces to support -- nice touch. Thanks for a great video Smerkin, helps a lot! 🙂

• 
  @smerkin500015 күн бұрын

  It always surprises me how the kit designers use the pieces.

• 
  @theeightbitdad22 күн бұрын

  how do you change the brightness of the screen?

• 
  @smerkin500022 күн бұрын

  I don’t think it’s possible, the manual doesn’t say anything about it.

• 
  @heighRick22 күн бұрын

  Such a cool little truck, thanks Smerkin, helps a lot!

• 
  @smerkin500022 күн бұрын

  I love the Shell logo on the doors

• 
  @heighRick29 күн бұрын

  Such a great tune!! Thanks for sharing the build, helps a lot.

• 
  @smerkin500029 күн бұрын

  Great memories with that tune 😊

• 
  @ZinluOmenborn23 күн бұрын

  I definitely second this.

• 
  @louisegrimhelm3041Ай бұрын

  I wonder if one of those bearings will work in my nerdy gurdy

• 
  @smerkin5000Ай бұрын

  Mayhaps

• 
  @gazzalancheАй бұрын

  AWESOME haul!! Hope they fit your router!! I assume you made sure.. Especially when the deal is too good to be true!!

• 
  @smerkin5000Ай бұрын

  Yup, they fit both of my routers so all is good 👍🏾

• 
  @Heimer_DАй бұрын

  Worth it 100%!

• 
  @smerkin5000Ай бұрын

  Totally agree

• 
  @gazzalancheАй бұрын

  How fancy? Reaalllll FAAAACNNCCCYYY!! :)

• 
  @smerkin5000Ай бұрын

  😂

• 
  @gazzalancheАй бұрын

  Royalty Free YT song... I was waiting for your channel song ya got done for ya streaming!! Haha

• 
  @smerkin5000Ай бұрын

  I honestly forgot about that lol

• 
  @FF-xl7ywАй бұрын

  love the cap idea!!!!!

• 
  @smerkin5000Ай бұрын

  Awesome

• 
  @rexhossАй бұрын

  Seems like there is a lot of static or wind noise in the background of much of your recording. Is that something in your room or just that that mics have a noisy sound floor?

• 
  @smerkin5000Ай бұрын

  I had a 8xHDD NAS behind me and also the mic at the beginning was the modmic while I was doing the unboxing. Pay attention to the top left where I indicate which mic you are listening to throughout the video. I also applied no post processing to any of the audio for this video.

• 
  @gazzalanche2 ай бұрын

  I see the pilot lost his head a few times...

• 
  @smerkin50002 ай бұрын

  Must’ve stood into the blades 🤣 🚁

• 
  @RaylayRTS2 ай бұрын

  Once i connect it to my camera via the 3.5 jack, can i press record from my camera and it automatically starts taking audio from the new mic ?

• 
  @smerkin50002 ай бұрын

  Yes

• 
  @dragonstar783722 ай бұрын

  SO CLOSE TO 1000 U CAN DO IT

• 
  @smerkin50002 ай бұрын

  Soon

• 
  @gazzalanche2 ай бұрын

  I love the magic of doing it hands-free!!! :D

• 
  @smerkin50002 ай бұрын

  I do like a touch of magic

• 
  @gazzalanche2 ай бұрын

  touch free!!@@smerkin5000

• 
  @robjarv47573 ай бұрын

  Does that not use materials ?

• 
  @smerkin50003 ай бұрын

  When you use the calculator the materials are free however there is an option to take materials from storage if available (if I remember correctly)

• 
  @HushR6Official3 ай бұрын

  My one question, is it possible to upgrade the 4gb of storage or is it the only way for your standalone recording

• 
  @smerkin50003 ай бұрын

  There’s no upgrade option unfortunately

• 
  @HushR6Official3 ай бұрын

  @@smerkin5000 cool just recieved mine in mail today but was at work, I think I can still manage with the 4gb since it should be around 9 hours of capture time or so if I'm not mistaken

• 
  @smerkin50003 ай бұрын

  @@HushR6Official awesome, I’m sure you’ll love it and the storage should be more than ample

• 
  @HushR6Official2 ай бұрын

  @@smerkin5000 I have been experimenting w/ it. The storage has been wayy more than enough so far, But been having an issue w/ recording I have been trying Mono and only one of the transmitters is recording internally, but I have both recording or at least indicating that they are recording. So, unfortunately I have had 0 luck on Mono mode. I did do Stereo once with good audio, but it was muffled from the noise cancellation on top of my sound proofing of my helmet. So tomorrow I will be trying Stereo again to see if maybe when on mono it only decides to record 1 transmitter even though both are recording on separate locations, (Setup Explained) so I have my helmet mic a Purple Panda lav w/ a dead cat connected to Transmitter 1, and my bag mic Solo Transmitter 2 w/ Dead cat capturing exhaust, So far the exhaust has always come through, But my helmet mic has been hit or miss. No sound just static but not in response to my voice or exhaust. I am also ensuring my lav mic is securely in and not loose or able to be pulled easily either via the wind or me turning a certain way. Was wondering if during your testing Mono ever gave you any issues when using both transmitters at the same time. From my understanding Mono should be single track use from one or both transmitters if using both while stereo would be dual track use via one or both transmitters if using both or is that just me having a lack of knowledge moment?

• 
  @JeanDearCanada3 ай бұрын

  Oh shit, you don't own a synthesizer. My videos have never been served outside synthesizer land...

• 
  @smerkin50003 ай бұрын

  Yeah I was watching another video on synths and I think because of that your video was recommended

• 
  @JeanDearCanada3 ай бұрын

  @@smerkin5000 It's a pretty big deal for me! Virtually all of my audience, also has a KZread about a room full of badly played synthesizers. Being served outside of that silo is an important milestone, because I need to change the voice of my writing!

• 
  @badalbadal59043 ай бұрын

  can you randomise the delays between each clicks, lets say 0,10ms and 0,05 can it randomise the mouse clicks between those paeameters between each click

• 
  @smerkin50003 ай бұрын

  I doubt it as the mouse software just repeats it in a loop

• 
  @alsheypankow22213 ай бұрын

  I like the use of two cameras.

• 
  @smerkin50003 ай бұрын

  Thank you

• 
  @heighRick4 ай бұрын

  weirdo 😉 ...Great upgrade, thanks Smerkin, helps a lot!

• 
  @smerkin50004 ай бұрын

  🤪

• 
  @HeilTec4 ай бұрын

  Great!

• 
  @smerkin50004 ай бұрын

  Been using it today, it works really well

• 
  @HeilTec4 ай бұрын

  Doing something the first time is always unpredictable in time.

• 
  @smerkin50004 ай бұрын

  Agree

• 
  @HeilTec4 ай бұрын

  ⛳Nice woodworking.

• 
  @smerkin50004 ай бұрын

  Thanks

• 
  @heighRick4 ай бұрын

  Smerkin, remember to do the thing!! That's a nice addition to your bench. Goes to check if the similar power pack he has is 5, 12 or 24v ...hmm. Thanks, helps a lot!

• 
  @smerkin50004 ай бұрын

  Thanks for the reminder, I nearly forgot

• 
  @erikm97684 ай бұрын

  What if you dont grab it all, is the crate still there then?

• 
  @smerkin50004 ай бұрын

  Yes, it remains until all items are removed

• 
  @erikm97684 ай бұрын

  @@smerkin5000 thanks man appreciate 👌

• 
  @smerkin50004 ай бұрын

  @@erikm9768 no worries

• 
  @The.Original.Potatocakes4 ай бұрын

  Is there a skip Bo tournament. I’m really good, I’ve been playing 25 years

• 
  @smerkin50004 ай бұрын

  Sounds like you'll certainly make for good competition at a tournament if there was one!

• 
  @Giannis_Krimitzas4 ай бұрын

  Thank you

• 
  @jamesknauer5404 ай бұрын

  Thank you! Love the pup in your hand!

• 
  @smerkin50004 ай бұрын

  Glad the video is helpful. The pup is Randy, he’s very helpful when I was streaming 🤣

• 
  @louisegrimhelm30414 ай бұрын

  I was aghast to see him using the nice scriber I bought him as a centre punch

• 
  @smerkin50004 ай бұрын

  Mistakes were made 🤪

• 
  @heighRick4 ай бұрын

  Longer than expected ... close to every time! I'm either bad at estimating in my head or super easily distracted. Looking forward to wiring and assembly next time. Thanks Smerkin, helps a lot!

• 
  @smerkin50004 ай бұрын

  Yep, sometimes I can estimate well but it's the things I didn't take into consideration that get me distracted.

• 
  @BMindfulofLove4 ай бұрын

  this is so cool all i wanna do is live in a world of glass lol

• 
  @smerkin50004 ай бұрын

  Glad you liked it

• 
  @heighRick4 ай бұрын

  Thanks Smerkin, helps a lot!

• 
  @smerkin50004 ай бұрын

  🎉

• 
  @gazzalanche4 ай бұрын

  Was wondering if this project was still in the works!!

• 
  @smerkin50004 ай бұрын

  Yep, the router table side tracked me for a while

• 
  @morgant1c4 ай бұрын

  I'm still on a backlog with the router table videos... But this turned out very well! I like both the idea and how you put it into practice. I would not have dared to try and get that done on a drill press, but rather tried to find someone who owns a lathe :D

• 
  @gazzalanche4 ай бұрын

  No such thing as failure!! Just lessons learned!!

• 
  @smerkin50004 ай бұрын

  Very true

• 
  @gazzalanche4 ай бұрын

  Was a very good craft by the way! SHows appreciation for the gift with more than just a thanks, well played! @@smerkin5000

• 
  @dervakommtvonhinten5175 ай бұрын

  ok 2 questions. 1. does it still work or did update 8 screw that up like a bunch of mods i was working for hours yesterday trying to make work? 2. can you also copy something to a different location?

• 
  @smerkin50005 ай бұрын

  Yes it should work, the website has been updated to work with update 8 and is independent on mods. You can paste on any location, it’s all about pasting on top of a foundation you’ve put down in the game.

• 
  @goodie2shoes5 ай бұрын

  oh yeah!! nice

• 
  @smerkin50005 ай бұрын

  Thanks 😊

• 
  @pitchitworld5 ай бұрын

  Loved this series! What's next?

• 
  @smerkin50005 ай бұрын

  Glad to hear you loved it. I've got something plant related next and then check this video out for some other things I've got planned kzread.info/dash/bejne/eH13tdtuosmwntY.html

• 
  @heighRick5 ай бұрын

  Smerkin thanks for taking us along for the ride! Table is super nice and yeah, we'd better see it in use some time or we're going to be pretty mad 🙂 Thanks again, helps a lot!

• 
  @smerkin50005 ай бұрын

  Appreciate the kind words, for sure you'll see it in action soon.

• 
  @gazzalanche5 ай бұрын

  You should be proud mate, that's come up really really well!! We need to see it in action though too... so I expect to see a episode 15.1 sooner than later!! 🤣🤣 Job well done Smerkin.

• 
  @smerkin50005 ай бұрын

  Thanks for the positive feedback, glad you liked it. I got some projects coming up that will use it for sure!

• 
  @gazzalanche5 ай бұрын

  Brilliant! Look forward to it! @@smerkin5000

• 
  @heighRick5 ай бұрын

  They look super smart, and great additions! Thanks Smerkin, helps a lot.

• 
  @smerkin50005 ай бұрын

  Thanks for the positive vibes 😊

• 
  @heighRick5 ай бұрын

  Nice additions. Thanks Smerkin, helps a lot! If I'm just now seeing something that you've had for a good while or doesn't mean what I think it means, I'm so dumb, sorry, but man did you and L get married?

• 
  @smerkin50005 ай бұрын

  We got engaged a while ago, not sure when we’ll get married but we’re not in a rush 😊

• 
  @heighRick5 ай бұрын

  @@smerkin5000 then a belated congratulations on your engagement ♥️

• 
  @smerkin50005 ай бұрын

  @@heighRick thank you very much 😊

• 
  @gazzalanche5 ай бұрын

  Liking it good sir!! WHat's the next build planned?

• 
  @smerkin50005 ай бұрын

  Floral

• 
  @gazzalanche5 ай бұрын

  SO close to finishing before the new year!!

• 
  @smerkin50005 ай бұрын

  You bet, hope you have a great one 🎉

• 
  @gazzalanche5 ай бұрын

  Yo're saving that time for your annual worldwide NYE stream yes? :D @@smerkin5000