It never rain Southern California, "They tell Me"!!!
@nathancunningham8717Күн бұрын
Just got this same one for my Typhon 6s TLR. Very smooth and fast. No issues yet. I have a AFGRC 20kg 0.055 sec servo in my Typhon 3s and it's been great the last 2yrs
@818_Custom_GarageКүн бұрын
@@nathancunningham8717 they are solid and reliable!!!!!
@saaarrruhhhКүн бұрын
Where's your beard bro???
@818_Custom_GarageКүн бұрын
@@saaarrruhhh Haha!!! It’s taking a leave of absence for a couple weeks
@saaarrruhhh2 күн бұрын
Pretty sweet street shot there!!!
@818_Custom_GarageКүн бұрын
@@saaarrruhhh I like that angle..trying to see the hit
@willepolite12112 күн бұрын
Also tires are bigger so you may have to gear down to compensate for cogging try 16 or 18 tooth pinion
@818_Custom_GarageКүн бұрын
@@willepolite1211 good looking out
@willepolite12112 күн бұрын
If that’s a spektrum receiver they need to lay flat in order to work correctly that may be your problem
@818_Custom_Garage2 күн бұрын
@@willepolite1211 original receiver was bad and was laying flat. New receiver can be mounted on its side or flat and is working great!! Thanks for the feedback!!
@randallbradley4658 күн бұрын
I have a question, where did you get the side plates & wheel covers from & is that the correct name for it
@818_Custom_Garage8 күн бұрын
@@randallbradley465 the wheel wells and sides are from scorched scorchedparts.co.uk/collections/arrma-infraction/products/arrma-infraction-inner-fenders-mudguards
@jimk9628 күн бұрын
Dude so sick keep up great work.
@818_Custom_Garage8 күн бұрын
@@jimk962 thank you very much!!! Having a blast
@cacanjacowans5408 күн бұрын
Better packs will definitely get you 100mph+ those 4S OVONIC won't get it *SMC, CHNL, YOWOO GRAPHENE* .... The formula for 100mph (speed pinion, an 8S ESC & quality lipos that can actually keep up with the taller gearing) 🚀🤙🏾❤️
@818_Custom_Garage8 күн бұрын
@@cacanjacowans540 I’m surprised the ovonics have pushed it as hard as it has. Over 100mph easy.
@cacanjacowans5408 күн бұрын
@818_Custom_Garage true... but with a good ESC and the appropriate gearing you can hit 105mph *on 6S*
@818_Custom_Garage7 күн бұрын
@@cacanjacowans540 agreed but the temps on motor would not be great for normal use which is the goal for this truck…100mph capable and basher all day without overheating.
@cacanjacowans5407 күн бұрын
@818_Custom_Garage yeah the stock motor won't do that but the CASTLE XLX2/1100KV combo is very capable *hint-hint* 😉👌🏽🐍🏰💚
@prokedd551312 күн бұрын
Stock? Clickbait!!
@saaarrruhhh13 күн бұрын
Why you so handsome though?! 🤔
@johnericksen227816 күн бұрын
Nice Softail Bro. I like the paint job!!!
@818_Custom_Garage16 күн бұрын
@@johnericksen2278 much appreciated!!!’
@johnericksen227816 күн бұрын
Nice Softail Bro. I like the paint job!!!
@runerally116 күн бұрын
I wonder if two batteries of this size 139x47x25mm per piece will fit in oustcast 4s v2
I know Scorched recommend titanium towers for heavy bashing, but how do you think the carbon fiber would hold up? I've got some scorched carbon fiber Towers coming from my Typhon. Great analysis, sub'd!
@818_Custom_Garage18 күн бұрын
@@brucecampbellx ifs it going to be an on road typhon it will be good. If you are going to be jumping it and bashing it off-road, I would go titanium or with a set of M2C towers.
@cjchannel12RC22 күн бұрын
Awesome build man and i loved the video, 86 on 6s then 103 on 8s that's smoking fast i just bought my first Arrma on road platform a Felony and i might do some of the same mods you have on that Infraction you have. I already have a Castle MMX8s\1717 1,650kv combo for it i pulled from my XO-1 that was my first high speed on road platform but had a lot of issues with but will fix someday but i want to try out my new Arrma for awhile.
@818_Custom_Garage18 күн бұрын
@@cjchannel12RC it’s a great platform and a blast!! Enjoy!!!
@cjchannel12RC17 күн бұрын
@@818_Custom_Garage Thank you for the kind words, I got the chance to run my new Arrma Felony yesterday for a short bit and it handled amazing. and with some trimming on the steering it went straight as an arrow and compared to my XO-1 the Felony is so much easier to drive. My XO-1 would dance all around on the road and would need constant trimming.
@818_Custom_Garage17 күн бұрын
@@cjchannel12RC I built an XO-1 drag/speed run car for someone and it was always tough to get to run straight. I finally had it running straight once I worked on the alignment and added a slight toe out which adds a little drag but made a huge improvement
@cjchannel12RC17 күн бұрын
@@818_Custom_Garage Neat idea, I should try that when i get my XO-1 back up and running next month since i took all the electronics out of it for the Felony. But i do have an older Hobbywing Max 6 G1\4985 1,650kv combo i'm going to put in the XO-1.
@818_Custom_Garage16 күн бұрын
@@cjchannel12RC that would be a good combo
@JasonGunn41822 күн бұрын
Diff rear 500K, front 2ooK or 3ooK. Lock up the middle with ear plugs.
@818_Custom_Garage22 күн бұрын
@@JasonGunn418 thanks for the feedback
@JasonGunn41822 күн бұрын
If your going to bash it, leave it as a 6s. All that nice new carbon fiber will crack, and you will be back to stock. The big tire arrma are for bashing. You bash with that esc it will thermo lock on you. Keep bashing it will pop the caps on the side of that esc. 6s is good for bashing and drifting.
@818_Custom_Garage22 күн бұрын
@@JasonGunn418 thanks for the feedback
@user-wg1bp1wr7u22 күн бұрын
Love to see what that xmaxx could do with a wider and bigger ramp😀, thanx for testing the dboots backflips, just ordered a set😎
@818_Custom_Garage22 күн бұрын
@@user-wg1bp1wr7u I am working on making it wider. Just need to get the material
@JasonGunn41822 күн бұрын
Arrma doesn't build a stock 8S Infraction. Your running an upgraded esc which is their 8S version. This has been done tons of time buy other speed runners, such as myself. The 8S Spektrum esc's always cut out, they are pretty much JONK escs, like Hobbywing. They are a version of each other. Your not running anything stock, your not showing the live readings of your GPS either, LOL!!!! So their is nothing stock about your infraction, it's not stock, lol..... I have 10 versions of these car/truck. The trucks are the slowest, a long with the felony because of te rear gears. Most of my stuff has been converted to the limitless style for speed runs. By the way yes you lost some weight removing the brake, but it does inprove your stopping in a straight line as well.
@818_Custom_Garage22 күн бұрын
@@JasonGunn418 thank you for the feedback
@TRAELEVATION24 күн бұрын
Nice!!!!!! I just bought same motor esc combo. Did you ever figure out cogging issue?
@818_Custom_Garage22 күн бұрын
@@TRAELEVATION yes, with the gearing I turned the punch down a little and it went away. I think the Esc wires are a little long, with that length a cap pack would be helpful
@blocc13125 күн бұрын
I found if you shave of the lip on the esc tray just a bit you can fit the XLX2 pretty straight. I have it that way in my infraction and limitless. Great video
@RC-Closer131325 күн бұрын
Are you really using that as a drag car? You would have fun building a real drag truck/car, unless you have already done it before? I have two drag trucks… Losi and Traxxas… I’ve built them kind of here and there… they both would smoke that car on 2s… if I throw a 3s battery in it would blow your mind…
@818_Custom_Garage25 күн бұрын
@@RC-Closer1313 yeah I’m not really into the 2WD drag cars. To easy…wanted to build something that would be a challenge. Eventually it will most likely end up on foams and need some serious prep. This is all just testing right now.
@RC-Closer131325 күн бұрын
Hey bro, the make tire bands that hold the tire on perfect while the glue dries… they work awesome
@dorsettcook26 күн бұрын
Good job Grace
@dorsettcook26 күн бұрын
Great job, keep pushing
@curtiswilliams450126 күн бұрын
Great, build love the video. Keep it up. Love watching.
@818_Custom_Garage26 күн бұрын
@@curtiswilliams4501 greatly appreciated!!! We are learning more and having a blast!!
@lilsmurfdawg26 күн бұрын
You need foams……. Grp’s will do better than any hoons, but just try foams bsr.
@saaarrruhhh26 күн бұрын
Pretty rad video dude!!!
@818_Custom_Garage26 күн бұрын
@@saaarrruhhh we are having fun!!!
@owen853828 күн бұрын
Have you done the 6s hinge pin upgrade best upgrade plus the chassis brace you got fitted :)
@818_Custom_Garage28 күн бұрын
@@owen8538 haven’t done the 6s hinge pins. I haven’t seen the need yet. I have just sheered shock shafts and broken hubs. The arms and bulkheads have handled the abuse of major crashes so far
@owen853828 күн бұрын
@@818_Custom_Garage Gr8 upgrade tho they can break there and will help alot
@stephencartwright979229 күн бұрын
Very nice build. I'm running the same set up but had drama with the rear center dog bone.i went with a scorched pinocchio spool & shafts...went with PP spool & carbon shafts in my limitless...I personally like the arrma heat sink on the motor but Power Hobby has a 47-49mm mount that will except 2x 40mm rocket fans...also if you want grip go with grp tires. Hoons are no good around a hundred
@818_Custom_Garage28 күн бұрын
@@stephencartwright9792 that’s a bummer on the rear shaft but understandable due to its length. I have a drag limitless we are working on that has the Perfect Pass setup as well. I think I like the scorched setup a little more. We are definitely going to GRPs as well, just wanted to see what we could do since it’s just a bash build
@Hungrybird47429 күн бұрын
I have the wide box here with tie rods from arrma . Just being lazy .
@818_Custom_Garage28 күн бұрын
@@Hungrybird474 do it!! It’s a great upgrade
@shaneogarro29 күн бұрын
How much would that build cost
@818_Custom_Garage29 күн бұрын
@@shaneogarro it’s not the cheapest, but could be done and a smaller budget. You could keep everything pretty stock and just do the ESC and motor combo. I would definitely tune the diff and center or do a spool
@shaneogarro28 күн бұрын
@@818_Custom_Garage yea I'm new to the whole Adult rc so I'm still learning whats what I don't think I can do the things you did yet lol
@818_Custom_Garage28 күн бұрын
@@shaneogarro just take your time and patience. I honestly look at a lot of the schematics for the cars to see how they are assembled before I just jump in. You will pick a lot up by just doing and testing
@shaneogarro27 күн бұрын
@@818_Custom_Garage Whats the name of the Gps device you guys use
@marcfitrcanthony641929 күн бұрын
hey love your video. please tell me how you removed the red top base plate in the front by the shock tower. I'm struggling with mine. I want to fit the scortched carbon centre brace.. thnk you
@818_Custom_Garage29 күн бұрын
@@marcfitrcanthony6419 there are the screws on the top that need to be removed. You also need to remove the upper hinge pins as the rear hinge pin brace is screwed to the top plate
@curtiswilliams450129 күн бұрын
Would like to see you run in a longer Spot love the Video.
@818_Custom_Garage29 күн бұрын
@@curtiswilliams4501 I’ve been checking around. My only problem is I usually don’t have a lot of time so can’t travel very far
@RC-Closer1313Ай бұрын
The only thing I think was work you didn’t need to do was that gaudy heat sink😳 they make way nicer ones out of better aluminum (draws heat faster) for a few bucks since you have the fan… just my opinion… awesome build other than that bro🤙🏻
@818_Custom_GarageАй бұрын
@@RC-Closer1313 what heat sinks do you recommend? Would love to know know as I do a lot of different builds and always looking to improve
@RC-Closer1313Ай бұрын
@@818_Custom_Garage I’ll get the brand and get it to you better. If you like they have set ups with a thermostat that doesn’t run the fan unless it reaches a certain temp..
@818_Custom_Garage29 күн бұрын
@@RC-Closer1313 greatly appreciated!!!
@JoeGerdingRcАй бұрын
Great job by all!!! I've ran a similar setup for awhile now and as like ypu said it works for some parking lot bashing and some higher speeds. Involving the kids is epic...i try to mine as much as possible...memories they will remember forever!! 💯🔥💥🚀
@818_Custom_GarageАй бұрын
@@JoeGerdingRc thank you very much!!! We are having a blast and the infraction is one of my favorites for sure!! The kids are having fun as well. I hope they keep it going into the future!!!
@owen8538Ай бұрын
Another gr8 upgrade is all arm hinge pins fit m2c 6s ones and the m2c hinge pin arm holders
@818_Custom_GarageАй бұрын
@@owen8538 that’s awesome!!!
@junelopez9520Ай бұрын
I just dusted mine off ❤ can't wait to fire it up - thanks for sharing
@818_Custom_GarageАй бұрын
@@junelopez9520 it was great getting it back together!!! So much fun
@rbotgam3z675Ай бұрын
Just bought one two weeks ago, still ironing out the little issues but just put on its performance exhaust and its already a big improvement.
@818_Custom_GarageАй бұрын
@@rbotgam3z675 they are super fun!!!!
@rbotgam3z675Ай бұрын
@@818_Custom_Garage you damn right there
@saaarrruhhhАй бұрын
You guys are rockstars I tell ya!!!
@justinm6110Ай бұрын
Nice job , I have one in pieces to but the expensive parts are there like tires electrics and body that was used as a parts truck for another one ,
@818_Custom_GarageАй бұрын
@@justinm6110 they are awesome!!! It was a fun restoration
@marquezpradoluisjavier7754Ай бұрын
😺✌🏻
@modykujoperez261Ай бұрын
Little man got some skills watch when he get older
@AndrzejGodlewski-fq6tnАй бұрын
Where you bought the fans?
@818_Custom_GarageАй бұрын
It’s a Kraton heat sink that’s modified and the custom dual 50mm mount is from campsite carbon
@ianjohnhorwood2605Ай бұрын
it's sure looks like a 7th scale because it was behind you on your intro , making it look smaller than it really is on the vid 🤔 🤣🤣🤣 😜 Although it doesn't really look any larger than my FTX SUPERFORZA GT road car either on your vid . It's scale size , looks deceiving on video 🤣🤣🤣
@818_Custom_GarageАй бұрын
It’s a beast!!! I should have put it next to a 8s Kraton. It makes the XMaxx look small
@alm2417Ай бұрын
Great vid , as a bigger, could you say what the up grades are and how they make the car go faster, ie from bigger to advanced thanks again
@Hungrybird474Ай бұрын
You like it better ?
@818_Custom_GarageАй бұрын
It’s way better!
@Hungrybird47429 күн бұрын
@@818_Custom_Garagecool . I ll eventually do it . Thanks
@Eagles25Ай бұрын
Did u use the original servo saver?
@818_Custom_GarageАй бұрын
On the 3s and 4s Arrma’s I use a Kimbrough 124 that is slightly modded
Пікірлер
It never rain Southern California, "They tell Me"!!!
Just got this same one for my Typhon 6s TLR. Very smooth and fast. No issues yet. I have a AFGRC 20kg 0.055 sec servo in my Typhon 3s and it's been great the last 2yrs
@@nathancunningham8717 they are solid and reliable!!!!!
Where's your beard bro???
@@saaarrruhhh Haha!!! It’s taking a leave of absence for a couple weeks
Pretty sweet street shot there!!!
@@saaarrruhhh I like that angle..trying to see the hit
Also tires are bigger so you may have to gear down to compensate for cogging try 16 or 18 tooth pinion
@@willepolite1211 good looking out
If that’s a spektrum receiver they need to lay flat in order to work correctly that may be your problem
@@willepolite1211 original receiver was bad and was laying flat. New receiver can be mounted on its side or flat and is working great!! Thanks for the feedback!!
I have a question, where did you get the side plates & wheel covers from & is that the correct name for it
@@randallbradley465 the wheel wells and sides are from scorched scorchedparts.co.uk/collections/arrma-infraction/products/arrma-infraction-inner-fenders-mudguards
Dude so sick keep up great work.
@@jimk962 thank you very much!!! Having a blast
Better packs will definitely get you 100mph+ those 4S OVONIC won't get it *SMC, CHNL, YOWOO GRAPHENE* .... The formula for 100mph (speed pinion, an 8S ESC & quality lipos that can actually keep up with the taller gearing) 🚀🤙🏾❤️
@@cacanjacowans540 I’m surprised the ovonics have pushed it as hard as it has. Over 100mph easy.
@818_Custom_Garage true... but with a good ESC and the appropriate gearing you can hit 105mph *on 6S*
@@cacanjacowans540 agreed but the temps on motor would not be great for normal use which is the goal for this truck…100mph capable and basher all day without overheating.
@818_Custom_Garage yeah the stock motor won't do that but the CASTLE XLX2/1100KV combo is very capable *hint-hint* 😉👌🏽🐍🏰💚
Stock? Clickbait!!
Why you so handsome though?! 🤔
Nice Softail Bro. I like the paint job!!!
@@johnericksen2278 much appreciated!!!’
Nice Softail Bro. I like the paint job!!!
I wonder if two batteries of this size 139x47x25mm per piece will fit in oustcast 4s v2
?
Part #’s for the shocks and arms?
@@justinalbright2137 www.amainhobbies.com/losi-lmt-shock-set-2-los243013/p1276080?gad_source=1&gbraid=0AAAAAD_WU4CvEUa-0JjByCmh1FVnHWvWh&gclid=EAIaIQobChMI9r3Nm7SjhwMVygutBh0lYQW-EAQYBCABEgJTbPD_BwE www.horizonhobby.com/product/lwr-shck-mount-4-link-barset-15-4-lmt-ttlmt/TLR144000.html?gad_source=1&gbraid=0AAAAAD_XYFkLZ2F1DtU211-c26y6kNhas&gclid=EAIaIQobChMI9r3Nm7SjhwMVygutBh0lYQW-EAQYHCABEgKVAPD_BwE
I know Scorched recommend titanium towers for heavy bashing, but how do you think the carbon fiber would hold up? I've got some scorched carbon fiber Towers coming from my Typhon. Great analysis, sub'd!
@@brucecampbellx ifs it going to be an on road typhon it will be good. If you are going to be jumping it and bashing it off-road, I would go titanium or with a set of M2C towers.
Awesome build man and i loved the video, 86 on 6s then 103 on 8s that's smoking fast i just bought my first Arrma on road platform a Felony and i might do some of the same mods you have on that Infraction you have. I already have a Castle MMX8s\1717 1,650kv combo for it i pulled from my XO-1 that was my first high speed on road platform but had a lot of issues with but will fix someday but i want to try out my new Arrma for awhile.
@@cjchannel12RC it’s a great platform and a blast!! Enjoy!!!
@@818_Custom_Garage Thank you for the kind words, I got the chance to run my new Arrma Felony yesterday for a short bit and it handled amazing. and with some trimming on the steering it went straight as an arrow and compared to my XO-1 the Felony is so much easier to drive. My XO-1 would dance all around on the road and would need constant trimming.
@@cjchannel12RC I built an XO-1 drag/speed run car for someone and it was always tough to get to run straight. I finally had it running straight once I worked on the alignment and added a slight toe out which adds a little drag but made a huge improvement
@@818_Custom_Garage Neat idea, I should try that when i get my XO-1 back up and running next month since i took all the electronics out of it for the Felony. But i do have an older Hobbywing Max 6 G1\4985 1,650kv combo i'm going to put in the XO-1.
@@cjchannel12RC that would be a good combo
Diff rear 500K, front 2ooK or 3ooK. Lock up the middle with ear plugs.
@@JasonGunn418 thanks for the feedback
If your going to bash it, leave it as a 6s. All that nice new carbon fiber will crack, and you will be back to stock. The big tire arrma are for bashing. You bash with that esc it will thermo lock on you. Keep bashing it will pop the caps on the side of that esc. 6s is good for bashing and drifting.
@@JasonGunn418 thanks for the feedback
Love to see what that xmaxx could do with a wider and bigger ramp😀, thanx for testing the dboots backflips, just ordered a set😎
@@user-wg1bp1wr7u I am working on making it wider. Just need to get the material
Arrma doesn't build a stock 8S Infraction. Your running an upgraded esc which is their 8S version. This has been done tons of time buy other speed runners, such as myself. The 8S Spektrum esc's always cut out, they are pretty much JONK escs, like Hobbywing. They are a version of each other. Your not running anything stock, your not showing the live readings of your GPS either, LOL!!!! So their is nothing stock about your infraction, it's not stock, lol..... I have 10 versions of these car/truck. The trucks are the slowest, a long with the felony because of te rear gears. Most of my stuff has been converted to the limitless style for speed runs. By the way yes you lost some weight removing the brake, but it does inprove your stopping in a straight line as well.
@@JasonGunn418 thank you for the feedback
Nice!!!!!! I just bought same motor esc combo. Did you ever figure out cogging issue?
@@TRAELEVATION yes, with the gearing I turned the punch down a little and it went away. I think the Esc wires are a little long, with that length a cap pack would be helpful
I found if you shave of the lip on the esc tray just a bit you can fit the XLX2 pretty straight. I have it that way in my infraction and limitless. Great video
Are you really using that as a drag car? You would have fun building a real drag truck/car, unless you have already done it before? I have two drag trucks… Losi and Traxxas… I’ve built them kind of here and there… they both would smoke that car on 2s… if I throw a 3s battery in it would blow your mind…
@@RC-Closer1313 yeah I’m not really into the 2WD drag cars. To easy…wanted to build something that would be a challenge. Eventually it will most likely end up on foams and need some serious prep. This is all just testing right now.
Hey bro, the make tire bands that hold the tire on perfect while the glue dries… they work awesome
Good job Grace
Great job, keep pushing
Great, build love the video. Keep it up. Love watching.
@@curtiswilliams4501 greatly appreciated!!! We are learning more and having a blast!!
You need foams……. Grp’s will do better than any hoons, but just try foams bsr.
Pretty rad video dude!!!
@@saaarrruhhh we are having fun!!!
Have you done the 6s hinge pin upgrade best upgrade plus the chassis brace you got fitted :)
@@owen8538 haven’t done the 6s hinge pins. I haven’t seen the need yet. I have just sheered shock shafts and broken hubs. The arms and bulkheads have handled the abuse of major crashes so far
@@818_Custom_Garage Gr8 upgrade tho they can break there and will help alot
Very nice build. I'm running the same set up but had drama with the rear center dog bone.i went with a scorched pinocchio spool & shafts...went with PP spool & carbon shafts in my limitless...I personally like the arrma heat sink on the motor but Power Hobby has a 47-49mm mount that will except 2x 40mm rocket fans...also if you want grip go with grp tires. Hoons are no good around a hundred
@@stephencartwright9792 that’s a bummer on the rear shaft but understandable due to its length. I have a drag limitless we are working on that has the Perfect Pass setup as well. I think I like the scorched setup a little more. We are definitely going to GRPs as well, just wanted to see what we could do since it’s just a bash build
I have the wide box here with tie rods from arrma . Just being lazy .
@@Hungrybird474 do it!! It’s a great upgrade
How much would that build cost
@@shaneogarro it’s not the cheapest, but could be done and a smaller budget. You could keep everything pretty stock and just do the ESC and motor combo. I would definitely tune the diff and center or do a spool
@@818_Custom_Garage yea I'm new to the whole Adult rc so I'm still learning whats what I don't think I can do the things you did yet lol
@@shaneogarro just take your time and patience. I honestly look at a lot of the schematics for the cars to see how they are assembled before I just jump in. You will pick a lot up by just doing and testing
@@818_Custom_Garage Whats the name of the Gps device you guys use
hey love your video. please tell me how you removed the red top base plate in the front by the shock tower. I'm struggling with mine. I want to fit the scortched carbon centre brace.. thnk you
@@marcfitrcanthony6419 there are the screws on the top that need to be removed. You also need to remove the upper hinge pins as the rear hinge pin brace is screwed to the top plate
Would like to see you run in a longer Spot love the Video.
@@curtiswilliams4501 I’ve been checking around. My only problem is I usually don’t have a lot of time so can’t travel very far
The only thing I think was work you didn’t need to do was that gaudy heat sink😳 they make way nicer ones out of better aluminum (draws heat faster) for a few bucks since you have the fan… just my opinion… awesome build other than that bro🤙🏻
@@RC-Closer1313 what heat sinks do you recommend? Would love to know know as I do a lot of different builds and always looking to improve
@@818_Custom_Garage I’ll get the brand and get it to you better. If you like they have set ups with a thermostat that doesn’t run the fan unless it reaches a certain temp..
@@RC-Closer1313 greatly appreciated!!!
Great job by all!!! I've ran a similar setup for awhile now and as like ypu said it works for some parking lot bashing and some higher speeds. Involving the kids is epic...i try to mine as much as possible...memories they will remember forever!! 💯🔥💥🚀
@@JoeGerdingRc thank you very much!!! We are having a blast and the infraction is one of my favorites for sure!! The kids are having fun as well. I hope they keep it going into the future!!!
Another gr8 upgrade is all arm hinge pins fit m2c 6s ones and the m2c hinge pin arm holders
@@owen8538 that’s awesome!!!
I just dusted mine off ❤ can't wait to fire it up - thanks for sharing
@@junelopez9520 it was great getting it back together!!! So much fun
Just bought one two weeks ago, still ironing out the little issues but just put on its performance exhaust and its already a big improvement.
@@rbotgam3z675 they are super fun!!!!
@@818_Custom_Garage you damn right there
You guys are rockstars I tell ya!!!
Nice job , I have one in pieces to but the expensive parts are there like tires electrics and body that was used as a parts truck for another one ,
@@justinm6110 they are awesome!!! It was a fun restoration
😺✌🏻
Little man got some skills watch when he get older
Where you bought the fans?
It’s a Kraton heat sink that’s modified and the custom dual 50mm mount is from campsite carbon
it's sure looks like a 7th scale because it was behind you on your intro , making it look smaller than it really is on the vid 🤔 🤣🤣🤣 😜 Although it doesn't really look any larger than my FTX SUPERFORZA GT road car either on your vid . It's scale size , looks deceiving on video 🤣🤣🤣
It’s a beast!!! I should have put it next to a 8s Kraton. It makes the XMaxx look small
Great vid , as a bigger, could you say what the up grades are and how they make the car go faster, ie from bigger to advanced thanks again
You like it better ?
It’s way better!
@@818_Custom_Garagecool . I ll eventually do it . Thanks
Did u use the original servo saver?
On the 3s and 4s Arrma’s I use a Kimbrough 124 that is slightly modded