Sorry I’m not sure on what this means but thanks for watching 😊
@joeblow17115 күн бұрын
Oil and gas? Or something specialist? i do industrial refrigeration in NSW and i feel like we have some similar skills hahaha
@njpw14024 күн бұрын
Yeah refrigeration mechanic is not something I’ve ever done 👍
@joeblow17115 күн бұрын
mate mate this is the 2nd vid of yours ive watched. I really appreciate your skill set on multiple things. Its really awesome aye. please keep up the good work its rare to have someone like you on youtube
@njpw14024 күн бұрын
Thank you so much ☺️
@joeblow17115 күн бұрын
13:10 mate you unknowlingly just showed 100ish noobs how to use 2 spanners together but I still guarantee they will struggle with orientation at least for their first 20 tries of this technique hahahaha I would love to know what your trade is too because your skill set seems very familiar as a self confessed wanna be car mechanic specialising in something completely different!!
@njpw14024 күн бұрын
Thanks heaps I started out as an automotive mechanic then Diesle, then HDfitter, then boilie 🤣 will it ever stop probably not 🤣😊👍
@geoffodger10 күн бұрын
What engine are you going to be using for conversion LS?
@njpw140210 күн бұрын
Not an LS and I’m still enjoying the tb so I will have to wait and see thanks for watching 👍
@chase_that_feeling10 күн бұрын
I know what the engine will be haha
@gunners252325 күн бұрын
Nice job looks mint weird checked the doors on my dx already has coro tub and holes for every door might be lucky and not have to drill.
@njpw140225 күн бұрын
Awesome 🤩 I wish mine did but it does now 😁 thanks for watching 😊
@-garagehome4444Ай бұрын
Why were these things changed? Was the carburetor used?
@njpw1402Ай бұрын
Yeah it was second hand and the carburettor did not like the steep angles
@-garagehome4444Ай бұрын
Helow My engine tb45s Holley 480 Distributor 12 Rpm 800 1-At the beginning of startup, the engine runs well, and when I travel a long distance, the rpm drops and the engine begins to vibrate and become unstable. 2-When the engine is turned off, it starts to vibrate as if the engine wants to start again, but after two seconds it stops.
@njpw1402Ай бұрын
Cool a tb45, engine run on is common for carbon build up which maybe it’s getting a bit too much fuel checking the jet sizing is a good idea and try reducing the fuel mixture thanks for watching and the comment 😊
@-garagehome4444Ай бұрын
@@njpw1402 Thank you
@dtpprojectsАй бұрын
Nice! should be a seriously awesome build mate!
@njpw1402Ай бұрын
It’s taking shape now
@BenBen-ef5biАй бұрын
Was it backfiring when cold before your serviced the carby
@njpw1402Ай бұрын
Yeah big time
@BenBen-ef5biАй бұрын
@@njpw1402 thanks
@robertgeddes5113 ай бұрын
On my 80 series I upgraded the speaker with pioneer speakers. And 3D printed housings to accommodate the new speakers in the existing location with the original covers on the outside so it looks like it did from the factory.
@njpw14023 ай бұрын
Cool I’ve always wanted to do some 3d printing I will have to get one one day
@joshcook45154 ай бұрын
😂 youre welcome 🎉
@njpw14024 ай бұрын
🤪
@joshcook45154 ай бұрын
I know exactly what that is 🔥
@njpw14024 ай бұрын
Owh yeah 👍
@user-yr3jn2zm4e4 ай бұрын
Very informative and helpful thank you very much
@njpw14024 ай бұрын
Thank you you’re a legend 👍
@markwright1965 ай бұрын
You just need to test covering one then up to all but one. This makes sure your bypass diodes are correct and isolates shaded/low output panels while charging off the rest.
@njpw14024 ай бұрын
Thanks man
@RustyCandyAdventures5 ай бұрын
The light, 3m orange or red tape. Look at seek adventures. Removable solar panel matrax lock. Using the panel. Fridge, lock your hubs, voltage step up converter. 24 volt oven with step up converter. Going overland, washing video. Eyewash fix.
@njpw14024 ай бұрын
Thanks
@terrykeil67515 ай бұрын
Looks like it works for you and that is all that matters. Maybe some door seals to keep out the dust?
@njpw14025 ай бұрын
Thanks are thinking of the fridge box
@njpw14025 ай бұрын
The vents seem to be adequate for the running of the fridge but I have had water in the bottom when it’s been raining as travelling but nothing has caused any issues so far it’s only very minimal thanks for your comment 😊
@chase_that_feeling5 ай бұрын
Aww Mocha dog
@njpw14025 ай бұрын
She still going amazing puppy dog 🐕☺️
@chase_that_feeling5 ай бұрын
Crazy mate haha after talking to you the other day and about her it was great to see her in this video.
@MrKeenaz5 ай бұрын
Great set up. Do you get much moisture from rain or condensation in the fridge area when it’s closed up or flying down the road when it’s raining for example?
@KellyWelch5 ай бұрын
🙌 "Promo sm"
@njpw14025 ай бұрын
Thanks ☺️
@paulholubecki63866 ай бұрын
Did you consider that it may have been the other pump. Easy way to check is to just pull the fuse one at a time to isolate the faulty pump. Guaranteed it has a busted bolt on the conrod bolt. Common problem. That was so frustrating to watch you destroy that compressor.. Guaranteed its the other pump. Hope you dont charge by the hour😅
@njpw14026 ай бұрын
All good I had tested the other pump and these are mine so I was lazy and I have a few more thanks for the comment I think it was the first time I’ve pulled one apart 🤣
@paulholubecki63866 ай бұрын
You didn't need to pull half those bolts to pull that apart. Dont use a drill gun to pull the thing apart, thats how you bust bolts.😮
@njpw14026 ай бұрын
Thanks
@user-hd4vn4kf4n7 ай бұрын
Thankyou. I am just getting my first Landcruiser soon. Need to swat up on this
@njpw14027 ай бұрын
No worries thank you ☺️
@CourtneyGross-zi5iz7 ай бұрын
Hey mate, just wondering how thick those speaker pods were? Looks awesome mate. Good video🤙
@njpw14027 ай бұрын
43mm at the thickest point thanks for watching 😊
@njpw14027 ай бұрын
43mm at the thickest point thanks for watching
@muruyamayukari.75237 ай бұрын
Thats how easy you fix older engines. Love it. Cant do that on todays cars.
@njpw14027 ай бұрын
Thanks it’s nice to play with old cars
@muruyamayukari.75237 ай бұрын
@@njpw1402 indeed fixed a old volvo p1800 during my education to become a mechanic. Had no spare parts avaible for it to order so we had to diy fix it and it still runs today years later. Found it funny how my class mates did not take up on this rare offer but oh well.
@njpw14027 ай бұрын
@@muruyamayukari.7523 the skills you learn by building your own parts will stay with you forever and the ability to custom make things is so rewarding 😁
@mikelewis69657 ай бұрын
Link? I definitely need one
@njpw14027 ай бұрын
I bought them through TJM thanks for the comment
@harmondadd63767 ай бұрын
Hey mate love how the raptor coat looks on the cruiser! Did you use the standard raptor pearl white kit or is it tinted kit. im considering painting my cruiser in raptor white
@njpw14027 ай бұрын
Hay mate thanks for the comment and it’s still the goods, it’s the tintable version, you won’t regret it cheers for watching 😊
@basiizroda7 ай бұрын
Nothing wrong in getting a better than a Toyota vehicle 😁 man how I miss my GU
@njpw14027 ай бұрын
Haha fun but I am constantly working on it 🤣
@joshcook45157 ай бұрын
You've seen the light 🎉
@njpw14027 ай бұрын
Yeah but now the subs may drop or they may rise 🤣🤣
@joshcook45157 ай бұрын
Can't wait to find out
@njpw14027 ай бұрын
Same
@LostandFoundTravel7 ай бұрын
I have my back sliders "faux tinted" with that same material they wrap buses in. Black with tons of tiny small holes. Easy to apply and cheap compared to tint film.
@njpw14027 ай бұрын
Awesome thanks for the comment that sounds effective for the job
@LostandFoundTravel7 ай бұрын
@@njpw1402 Thanks for the vid. I've been hunting for some non generic covers. Also good for keeping prying eyes off of all your gear. I'll mention the channel in the order when I pick them up before US summer.
@njpw14027 ай бұрын
@LostandFoundTravel thanks heaps ☺️
@wade26698 ай бұрын
What an absolute belter of a home base mate, you hit it out of the ballpark grate job man 👍👍👍 can't wait to see you using it in your future adventure's cheers.
@njpw14028 ай бұрын
Thanks heaps mate I really appreciate the comment and the sub
@southerndiy19 ай бұрын
Great video and the speaker pods look quality 👍 for anyone watching, I’d recommend applying sound deadening to the metal door skins while you’ve got the door trims off. Made a big difference in my 80, wish I took a before and after dB reading.
@njpw14029 ай бұрын
Thanks for watching and yeah I should have
@rosskelly82689 ай бұрын
Wow, thank you! I wanted to see one of these Ridgebacks being used, and I was HOPING you would take us inside of it ... and you did!!
@njpw14029 ай бұрын
No worries, thanks for watching still enjoying it but there are some things I would change about it but only small things
@zhangharry63149 ай бұрын
Sick😂❤
@njpw14029 ай бұрын
Cheers 🍻
@51KTM51Hurricane9 ай бұрын
Good job. You work like I do so... There is a small chance that I can do that too😅
@njpw14029 ай бұрын
Thanks for watching you know you can 😉
@MrKeenaz10 ай бұрын
G’day Jason. New subby and I like your work. Thanks for posting this vid ay. I see it’s been a month now, how has the tent held up so far, any signs of wear on the fly mesh from being squashed down due to keeping your bedding in there as well? I’m in the market for one and so far darche is the brand to go for. Cheers from Mario.
@njpw140210 ай бұрын
Thanks Mario the tent is good I’m in it right now the mesh is still in new condition I will follow up on a long term review in a few months as I’m using it a lot
@geoffodger10 ай бұрын
Yes I have mine on the drivers side easy to fit as you showed
@njpw140210 ай бұрын
Cool thanks 😊
@WACampingAdventures11 ай бұрын
Onya brother! 24mins compared to 4 mins huge!!!
@njpw140211 ай бұрын
I think I’m just getting lazy 🤣🤣
@davidowencunningham2743 Жыл бұрын
Give us a update ? Tell me they are not Sucksion cups holding it on? WE ALL KNOW HOW THAT GO'S IN 60'C
@njpw1402 Жыл бұрын
Yes they are suction cups I have had some come loose and I just stuck them back on nothing fell off yet but I assume time will tell, they have been on for six months and through summer in the Pilbara, thanks for the comment 😊
@davidowencunningham2743 Жыл бұрын
Does it leak? Follow up Review? Is it worth the $4,000,000
@njpw1402 Жыл бұрын
No leaks yet haha 😂 and it did not cost even slightly that much thanks for the comment 😁
@tobo26 Жыл бұрын
Hi, pretty sure you installed the struts upside down, your seals will dry out and the struts will fail over time.
@njpw1402 Жыл бұрын
Thanks for the tip I’ll be sure to check thanks 😊
@joshcook4515 Жыл бұрын
Nice bit of kit, I might need a kit for the patrol
@njpw1402 Жыл бұрын
Yeah you know it 😆
@TimsBitsnPieces Жыл бұрын
Just one comment.. You need to look into a directional microphone or move the camera closer, as your audio level is quite low 0:00 - 9:50 and then BAM very loud as your holding the camera (and the same in your other videos I've watched) and being so far away it picks up the wind noise much louder than you.... I had to turn my PC speakers up way higher than usual and every time the wind blew across the microphone I had to turn it down as it hurt my ears.... and I also have hearing aids and it doesn't help with the increased volume level and then a sound closer or louder than your voice.....
@njpw1402 Жыл бұрын
Thanks man I’m hoping I have rectified this issue by using a different camera and wireless microphone thanks for the comments
@TimsBitsnPieces Жыл бұрын
This is exactly what a lot of people do not understand and is an issue here in Australia that each state has their own set of rules which differ from state to state... and many of the people that upgrade their 4wd's are more than likely putting themselves in a situation to have a canary put on their vehicle when they do go interstate...... Also, the cost involved in getting an engineer's certificate is very expensive and involves a lot of running around getting details and tick boxes ticked as I have found out here in Melbourne.. my 80 series has a 2" lift and it suits me just fine...
@njpw1402 Жыл бұрын
Yeah it would be nice if all states were the same, I wonder if the states know we are one country 🤣🤣🤣
@TimsBitsnPieces Жыл бұрын
I have been looking into these armrests and other options for a while and the only thing for me is I Don't need nor Want a drink holder up there on the door frame. I would be cutting the thing off.. It is a pity they are not longer to fit the whole length of the door... that is what I am looking for but no one makes them like I am after.....
@njpw1402 Жыл бұрын
It’s nice they can easily be removed and I don’t think Toyota thinks too much about driver comfort but all is good, thanks for the comment
@BeauRaven33 Жыл бұрын
Thanks for this video. It has helped with my choosing a window to replace where the thieves broke in.
@njpw1402 Жыл бұрын
Sorry to hear that but I’m glad to hear this helped in some way, thanks for watching
@Garbosgarage Жыл бұрын
could you also just measure the angle of the flange instead of measuring the distance? This seems like it would be easy since you removed the shaft.
@njpw1402 Жыл бұрын
Yeah that is right I did not have an angle gauge or small level as this would be great but I was not very well equipped “thanks”
@adrianthomas2251 Жыл бұрын
Will that work on a gxl electric windows thanks by the way thanks for the video
@njpw1402 Жыл бұрын
Yeah I can’t see why not thanks for watching
@Bolinski9287 Жыл бұрын
Awesome work mate! Check out outback cleanups Australia this is our full time gig!
@njpw1402 Жыл бұрын
Yeah thanks I’m a big fan love your work
@chase_that_feeling Жыл бұрын
Mate by now you have more cable in that 80 than in your house haha
Пікірлер
FBI. Holland. Melanie Tuck Freire.
Sorry I’m not sure on what this means but thanks for watching 😊
Oil and gas? Or something specialist? i do industrial refrigeration in NSW and i feel like we have some similar skills hahaha
Yeah refrigeration mechanic is not something I’ve ever done 👍
mate mate this is the 2nd vid of yours ive watched. I really appreciate your skill set on multiple things. Its really awesome aye. please keep up the good work its rare to have someone like you on youtube
Thank you so much ☺️
13:10 mate you unknowlingly just showed 100ish noobs how to use 2 spanners together but I still guarantee they will struggle with orientation at least for their first 20 tries of this technique hahahaha I would love to know what your trade is too because your skill set seems very familiar as a self confessed wanna be car mechanic specialising in something completely different!!
Thanks heaps I started out as an automotive mechanic then Diesle, then HDfitter, then boilie 🤣 will it ever stop probably not 🤣😊👍
What engine are you going to be using for conversion LS?
Not an LS and I’m still enjoying the tb so I will have to wait and see thanks for watching 👍
I know what the engine will be haha
Nice job looks mint weird checked the doors on my dx already has coro tub and holes for every door might be lucky and not have to drill.
Awesome 🤩 I wish mine did but it does now 😁 thanks for watching 😊
Why were these things changed? Was the carburetor used?
Yeah it was second hand and the carburettor did not like the steep angles
Helow My engine tb45s Holley 480 Distributor 12 Rpm 800 1-At the beginning of startup, the engine runs well, and when I travel a long distance, the rpm drops and the engine begins to vibrate and become unstable. 2-When the engine is turned off, it starts to vibrate as if the engine wants to start again, but after two seconds it stops.
Cool a tb45, engine run on is common for carbon build up which maybe it’s getting a bit too much fuel checking the jet sizing is a good idea and try reducing the fuel mixture thanks for watching and the comment 😊
@@njpw1402 Thank you
Nice! should be a seriously awesome build mate!
It’s taking shape now
Was it backfiring when cold before your serviced the carby
Yeah big time
@@njpw1402 thanks
On my 80 series I upgraded the speaker with pioneer speakers. And 3D printed housings to accommodate the new speakers in the existing location with the original covers on the outside so it looks like it did from the factory.
Cool I’ve always wanted to do some 3d printing I will have to get one one day
😂 youre welcome 🎉
🤪
I know exactly what that is 🔥
Owh yeah 👍
Very informative and helpful thank you very much
Thank you you’re a legend 👍
You just need to test covering one then up to all but one. This makes sure your bypass diodes are correct and isolates shaded/low output panels while charging off the rest.
Thanks man
The light, 3m orange or red tape. Look at seek adventures. Removable solar panel matrax lock. Using the panel. Fridge, lock your hubs, voltage step up converter. 24 volt oven with step up converter. Going overland, washing video. Eyewash fix.
Thanks
Looks like it works for you and that is all that matters. Maybe some door seals to keep out the dust?
Thanks are thinking of the fridge box
The vents seem to be adequate for the running of the fridge but I have had water in the bottom when it’s been raining as travelling but nothing has caused any issues so far it’s only very minimal thanks for your comment 😊
Aww Mocha dog
She still going amazing puppy dog 🐕☺️
Crazy mate haha after talking to you the other day and about her it was great to see her in this video.
Great set up. Do you get much moisture from rain or condensation in the fridge area when it’s closed up or flying down the road when it’s raining for example?
🙌 "Promo sm"
Thanks ☺️
Did you consider that it may have been the other pump. Easy way to check is to just pull the fuse one at a time to isolate the faulty pump. Guaranteed it has a busted bolt on the conrod bolt. Common problem. That was so frustrating to watch you destroy that compressor.. Guaranteed its the other pump. Hope you dont charge by the hour😅
All good I had tested the other pump and these are mine so I was lazy and I have a few more thanks for the comment I think it was the first time I’ve pulled one apart 🤣
You didn't need to pull half those bolts to pull that apart. Dont use a drill gun to pull the thing apart, thats how you bust bolts.😮
Thanks
Thankyou. I am just getting my first Landcruiser soon. Need to swat up on this
No worries thank you ☺️
Hey mate, just wondering how thick those speaker pods were? Looks awesome mate. Good video🤙
43mm at the thickest point thanks for watching 😊
43mm at the thickest point thanks for watching
Thats how easy you fix older engines. Love it. Cant do that on todays cars.
Thanks it’s nice to play with old cars
@@njpw1402 indeed fixed a old volvo p1800 during my education to become a mechanic. Had no spare parts avaible for it to order so we had to diy fix it and it still runs today years later. Found it funny how my class mates did not take up on this rare offer but oh well.
@@muruyamayukari.7523 the skills you learn by building your own parts will stay with you forever and the ability to custom make things is so rewarding 😁
Link? I definitely need one
I bought them through TJM thanks for the comment
Hey mate love how the raptor coat looks on the cruiser! Did you use the standard raptor pearl white kit or is it tinted kit. im considering painting my cruiser in raptor white
Hay mate thanks for the comment and it’s still the goods, it’s the tintable version, you won’t regret it cheers for watching 😊
Nothing wrong in getting a better than a Toyota vehicle 😁 man how I miss my GU
Haha fun but I am constantly working on it 🤣
You've seen the light 🎉
Yeah but now the subs may drop or they may rise 🤣🤣
Can't wait to find out
Same
I have my back sliders "faux tinted" with that same material they wrap buses in. Black with tons of tiny small holes. Easy to apply and cheap compared to tint film.
Awesome thanks for the comment that sounds effective for the job
@@njpw1402 Thanks for the vid. I've been hunting for some non generic covers. Also good for keeping prying eyes off of all your gear. I'll mention the channel in the order when I pick them up before US summer.
@LostandFoundTravel thanks heaps ☺️
What an absolute belter of a home base mate, you hit it out of the ballpark grate job man 👍👍👍 can't wait to see you using it in your future adventure's cheers.
Thanks heaps mate I really appreciate the comment and the sub
Great video and the speaker pods look quality 👍 for anyone watching, I’d recommend applying sound deadening to the metal door skins while you’ve got the door trims off. Made a big difference in my 80, wish I took a before and after dB reading.
Thanks for watching and yeah I should have
Wow, thank you! I wanted to see one of these Ridgebacks being used, and I was HOPING you would take us inside of it ... and you did!!
No worries, thanks for watching still enjoying it but there are some things I would change about it but only small things
Sick😂❤
Cheers 🍻
Good job. You work like I do so... There is a small chance that I can do that too😅
Thanks for watching you know you can 😉
G’day Jason. New subby and I like your work. Thanks for posting this vid ay. I see it’s been a month now, how has the tent held up so far, any signs of wear on the fly mesh from being squashed down due to keeping your bedding in there as well? I’m in the market for one and so far darche is the brand to go for. Cheers from Mario.
Thanks Mario the tent is good I’m in it right now the mesh is still in new condition I will follow up on a long term review in a few months as I’m using it a lot
Yes I have mine on the drivers side easy to fit as you showed
Cool thanks 😊
Onya brother! 24mins compared to 4 mins huge!!!
I think I’m just getting lazy 🤣🤣
Give us a update ? Tell me they are not Sucksion cups holding it on? WE ALL KNOW HOW THAT GO'S IN 60'C
Yes they are suction cups I have had some come loose and I just stuck them back on nothing fell off yet but I assume time will tell, they have been on for six months and through summer in the Pilbara, thanks for the comment 😊
Does it leak? Follow up Review? Is it worth the $4,000,000
No leaks yet haha 😂 and it did not cost even slightly that much thanks for the comment 😁
Hi, pretty sure you installed the struts upside down, your seals will dry out and the struts will fail over time.
Thanks for the tip I’ll be sure to check thanks 😊
Nice bit of kit, I might need a kit for the patrol
Yeah you know it 😆
Just one comment.. You need to look into a directional microphone or move the camera closer, as your audio level is quite low 0:00 - 9:50 and then BAM very loud as your holding the camera (and the same in your other videos I've watched) and being so far away it picks up the wind noise much louder than you.... I had to turn my PC speakers up way higher than usual and every time the wind blew across the microphone I had to turn it down as it hurt my ears.... and I also have hearing aids and it doesn't help with the increased volume level and then a sound closer or louder than your voice.....
Thanks man I’m hoping I have rectified this issue by using a different camera and wireless microphone thanks for the comments
This is exactly what a lot of people do not understand and is an issue here in Australia that each state has their own set of rules which differ from state to state... and many of the people that upgrade their 4wd's are more than likely putting themselves in a situation to have a canary put on their vehicle when they do go interstate...... Also, the cost involved in getting an engineer's certificate is very expensive and involves a lot of running around getting details and tick boxes ticked as I have found out here in Melbourne.. my 80 series has a 2" lift and it suits me just fine...
Yeah it would be nice if all states were the same, I wonder if the states know we are one country 🤣🤣🤣
I have been looking into these armrests and other options for a while and the only thing for me is I Don't need nor Want a drink holder up there on the door frame. I would be cutting the thing off.. It is a pity they are not longer to fit the whole length of the door... that is what I am looking for but no one makes them like I am after.....
It’s nice they can easily be removed and I don’t think Toyota thinks too much about driver comfort but all is good, thanks for the comment
Thanks for this video. It has helped with my choosing a window to replace where the thieves broke in.
Sorry to hear that but I’m glad to hear this helped in some way, thanks for watching
could you also just measure the angle of the flange instead of measuring the distance? This seems like it would be easy since you removed the shaft.
Yeah that is right I did not have an angle gauge or small level as this would be great but I was not very well equipped “thanks”
Will that work on a gxl electric windows thanks by the way thanks for the video
Yeah I can’t see why not thanks for watching
Awesome work mate! Check out outback cleanups Australia this is our full time gig!
Yeah thanks I’m a big fan love your work
Mate by now you have more cable in that 80 than in your house haha
So true 🤣🤣🤣