how did it go? my hunch is it would tend to get too hot quite quickly then cool down quite quickly when the fire went out. My cold weather small boat cruising heating method is just have a hot water bottle in the sleeping bag. I know someone that made a vest that could take a hot water bottle front and back, for under the wet weather gear while on watch!
@KaamosBoats3 күн бұрын
@@dominictarrsailing It didnt go too Hot quick, but it cool down soon after the fire went down. Weather was aeound + 2-5 c.
@dominictarrsailing3 күн бұрын
@@KaamosBoats interesting. I bet a double layer on the tent would make a big difference. condensation tends to form on the outside layer, but the inside will be dry and I think it would be worth it for that, but bet it would stay warm longer too
@DIYCameraGuy5 күн бұрын
I’m building a similar boat right now. It’s going to have Lee boards.
@misiumalowany10 күн бұрын
Good speed ! The paint - is this two part paint polyurethane ? ( I saw that You used some serious breathing protection )
@barrydavies297712 күн бұрын
Great cockpit tent. Turns the boat into a proper mini cruiser.
@misiumalowany13 күн бұрын
Hello - what is the glue in the tube that You are using - I assume that it is not epoxy but very convenient !
@KaamosBoats13 күн бұрын
@@misiumalowany hi, it is polyurethane glue. Soudal purocol. I use it for gluing stringers etc
@misiumalowany10 күн бұрын
@@KaamosBoats Thank You - this will really speed up the process!!
@markpalmquist16 күн бұрын
So cool! Camper/boat
@aloysiusjones398521 күн бұрын
Nice, let that be lesson always wear a PFD. Not too sure about the fire though. 🇦🇺👍🍺
@johndarmiento22 күн бұрын
miss my homemade puddle duck but i just got too old
@vlocipede22 күн бұрын
Thanks for sharing this. It’s useful information as I start building my own Goose Explorer.
@KaamosBoats21 күн бұрын
I made additional dry storage to inside cabin. If you havent build roof yet you can build those, but needs extra sheet of ply
@vlocipede20 күн бұрын
@@KaamosBoatsGood idea. Where in the cabin did you make the extra dry storage?
@@KaamosBoatsthank you! That looks like a great solution.
@markpalmquist22 күн бұрын
Great video, Kitos!
@barrydavies297722 күн бұрын
For a 12 foot dinghy with a lid, this is very impressive. With a small float at the top of the mast, it would come back up dry.
@martinhachler173322 күн бұрын
Make a swimmer on top of the mast?
@ButterflyMattАй бұрын
Nice! Serene paddle and beautiful sunset. I love your boats.
@KaamosBoatsАй бұрын
Thanks
@BillEatsАй бұрын
You should pull the motor all the way out of the water it’s dragging and slowing you down
@KaamosBoatsАй бұрын
Yes you are right. I actually noticed it , but I didnt mind it...
@HalCasteel30005Ай бұрын
Just bought your plans today, I live in Brazil and Florida, will build Goose Explorer in Florida first for sailing the inland waters, and maybe a bit of Gulf Coast. Do you know of any that have been built in the US south-east?
@KaamosBoatsАй бұрын
Hi I dont know anyone, but you can ask from Goose Facebook group : facebook.com/share/kkg1sCu7kseDLKUa/
@vlocipedeАй бұрын
What a beautiful sunrise!
@s3b_Leney2 ай бұрын
This is why I'm a fan of the pivoting center boards as opposed to a dagger board, it'll just swing right back into the boat an do far less damage, provided that your going forwards of course...
@MinSredMashАй бұрын
100%. I live in a very rocky place and wouldn't have half as much fun without the peace of mind of a pivoting centerboard. Just need to dig chips of rock out of the rudder with pliers on occasion... (A dory's slanted rudder post with sliding pintle is also key here.)
That's a kayak... Got the build for the boat in this video?
@misiumalowany2 ай бұрын
Had to watch it twice as I could not believe - this magic ! ;-)
@KaamosBoats2 ай бұрын
Hah, thanks!
@markpalmquist2 ай бұрын
So cozy! Where do you sail? It looks like south western Finland. My father was born in Jurva. What kind of camera is on the end of your stick?
@KaamosBoats2 ай бұрын
Near Jyväskylä, Juva is actually quite close , ca 120km away, close to where my father has born - Anttola. The camera is inta360 camera on end of long selfie stick. ( stick is left on blondi angle so it look like a drone shot )
@markpalmquist2 ай бұрын
@@KaamosBoats kitos. My GoPro is on the brink. It keeps going dead just when I need it. I think it’s the battery connection cause if I pull the battery out and back in it works for about 10 minutes.
@lauriev2 ай бұрын
Crikey, that definitely wasn't sand!
@KaamosBoats2 ай бұрын
Had to be a stone
@MrBennybrice2 ай бұрын
Owee! Glad the little man didn't tip overboard! Love your work!
@KaamosBoats2 ай бұрын
Yep, nothing serious happened..
@FlightWatTerra2 ай бұрын
wow! Have you done any damage to the well?
@KaamosBoats2 ай бұрын
Only to back edge of the centerboard needs some sanding and epoxy, Nothimg serious...
@cybe7772 ай бұрын
What about all the gear? 10 liters of water, hammock, tarp, titanium stove, food, etc etc ? another trailer behind that one perhaps? :D
@KaamosBoats2 ай бұрын
All fits inside the kayak while cycling. When paddling and bicycle os inside- hmm maby not..
@robhosailor2 ай бұрын
Oops❗❗❗
@KorayU.3 ай бұрын
Çok güzel. Ne kadar balast var? Balastı ne ile sağlıyorsunuz?
@KaamosBoats3 ай бұрын
Hi, no ballast jos youtu.be own weight.
@pupiczemli63644 ай бұрын
It's brilliant)) I had the same problem when I built the kayak...I found a way out, the front wheels are from a wheelchair. They are just 8 inches, under the inner diameter of the hatch, with a camera
@KaamosBoats4 ай бұрын
Thanks for comment
@666devilknight4 ай бұрын
This looks like a puddle duck.
@emilianoalvarez71914 ай бұрын
Desde Argentina! You are great
@KaamosBoats4 ай бұрын
Ha Thanks!
@warjacare5 ай бұрын
Your boat is great, but your camera is a sh..t !
@Chinchilla271505 ай бұрын
This is pretty cool. You are a very creative fellow. Is this an off-the-shelf tent? If so, would you mind sharing info about it?
@KaamosBoats5 ай бұрын
Thanks, I drew the tent quite quicly and just sew it.. I think it can be used also without heater
@Chinchilla271505 ай бұрын
@@KaamosBoats Very impressive that you designed and sewed the tent yourself! You are the designer of the Goose Explorer too, right (as a modification of Storer's Oz Goose)? I would love to see more videos of it. Do you think it is reasonably safe to sail it in protected coastal waters? It looked like the kids who sailed with you in a prior video really enjoyed riding in it on what looked to be a lake (I am trying to inspire my little one to enjoy nature adventures in boats, and I bought the plans). The Ooze Goose (also your design, I think) looked really practical for similar purposes too, but alas it seems to have been retired. Surely those huge flotation tanks would make them pretty safe.
@KaamosBoats5 ай бұрын
@@Chinchilla27150 thanks, yep
@OkieBobby5 ай бұрын
RockStar!!!
@ButterflyMatt5 ай бұрын
Nice!
@perttukorhonen21295 ай бұрын
It is flame retardant, so lets hope it wont burn...
@rafabrodnicki82155 ай бұрын
Your ideas work! I've build two yours kayaks and in this summer I will build third - pro a canoe !
@perttukorhonen21295 ай бұрын
@@rafabrodnicki8215 vow, thanks!
@rafabrodnicki82155 ай бұрын
Super! Is this special cloth that it is not burning?
@markandoyo22045 ай бұрын
How many knots were that speed?
@perttukorhonen21295 ай бұрын
Hi , I dont know or remember. It is quite a long tume a go..
@womplestilskin6 ай бұрын
This is Luonteri? Is it the same design as the ones that fit your bicycles?
@KaamosBoats6 ай бұрын
This is luonteri. Yep, I have fit bicycle with this one and also to shorter one, which I havent make plans. I am drawing bicycle modifications ad on to Luonteri plans which shows bike mods. Thanks Perttu
@womplestilskin6 ай бұрын
Thanks for the subtitles!
@andreberezovskiy6 ай бұрын
Wow, not very fast, but very cool!!!
@jockamofeno76326 ай бұрын
The cabin was the most impressive part for me
@alextheboatguy3997 ай бұрын
How long is the boat?
@KaamosBoats7 ай бұрын
3666mm , www.kaamosboats.com/goose%20explorer.htm
@alextheboatguy3997 ай бұрын
@@KaamosBoats thank you
@craybiz998 ай бұрын
Really impressed with the canoe designs which you can paddle and sail including sailing with outriggers. Wow ...! Would it be possible to have a joiner in the middle of the canoe for easy transport? Kind regards Carl from Australia ...
@KaamosBoats8 ай бұрын
Thanks. It would be possible. Now that canoe is joined nrar Stern, from two full ply sheets lengtg
@jvaldesbartroli8 ай бұрын
first
@ozziethecat6498 ай бұрын
thats the goose explorer? whats the name and where do i get the project
@KaamosBoats8 ай бұрын
Hi Yes it is. There are also sailing wideo on my Chanel and plans can be found duckworks.com/goose-explorer-plans/
@andrasvarga40669 ай бұрын
A legjobb nyaralás....
@mikegooch13959 ай бұрын
This looks a great build, have you done any capsize tests? I guess you're sacrificing some bouyancy if the cuddy gets swamped
@KaamosBoats9 ай бұрын
Ho I havent , maybe I Will on nect summer. Cabin hatch should be closed and secured, when there are risk of capsize, then not much water should go inside the cabin. Thanks.
@adddude752410 ай бұрын
oh wow, that looks fun!
@kailue149910 ай бұрын
Clever folding design, Top👍
@KaamosBoats10 ай бұрын
Thanks!
@gerworks10 ай бұрын
Nice bicycle design!!!
@KaamosBoats10 ай бұрын
Thanks!
@curtlynn8495 Жыл бұрын
If you don’t mind me asking, what thickness of material are you using?
Пікірлер
how did it go? my hunch is it would tend to get too hot quite quickly then cool down quite quickly when the fire went out. My cold weather small boat cruising heating method is just have a hot water bottle in the sleeping bag. I know someone that made a vest that could take a hot water bottle front and back, for under the wet weather gear while on watch!
@@dominictarrsailing It didnt go too Hot quick, but it cool down soon after the fire went down. Weather was aeound + 2-5 c.
@@KaamosBoats interesting. I bet a double layer on the tent would make a big difference. condensation tends to form on the outside layer, but the inside will be dry and I think it would be worth it for that, but bet it would stay warm longer too
I’m building a similar boat right now. It’s going to have Lee boards.
Good speed ! The paint - is this two part paint polyurethane ? ( I saw that You used some serious breathing protection )
Great cockpit tent. Turns the boat into a proper mini cruiser.
Hello - what is the glue in the tube that You are using - I assume that it is not epoxy but very convenient !
@@misiumalowany hi, it is polyurethane glue. Soudal purocol. I use it for gluing stringers etc
@@KaamosBoats Thank You - this will really speed up the process!!
So cool! Camper/boat
Nice, let that be lesson always wear a PFD. Not too sure about the fire though. 🇦🇺👍🍺
miss my homemade puddle duck but i just got too old
Thanks for sharing this. It’s useful information as I start building my own Goose Explorer.
I made additional dry storage to inside cabin. If you havent build roof yet you can build those, but needs extra sheet of ply
@@KaamosBoatsGood idea. Where in the cabin did you make the extra dry storage?
@@vlocipede drive.google.com/file/d/1WKi1LNDH0ZDChLHMUHot7-QpLd58lc9k/view?usp=drivesdk
@@KaamosBoatsthank you! That looks like a great solution.
Great video, Kitos!
For a 12 foot dinghy with a lid, this is very impressive. With a small float at the top of the mast, it would come back up dry.
Make a swimmer on top of the mast?
Nice! Serene paddle and beautiful sunset. I love your boats.
Thanks
You should pull the motor all the way out of the water it’s dragging and slowing you down
Yes you are right. I actually noticed it , but I didnt mind it...
Just bought your plans today, I live in Brazil and Florida, will build Goose Explorer in Florida first for sailing the inland waters, and maybe a bit of Gulf Coast. Do you know of any that have been built in the US south-east?
Hi I dont know anyone, but you can ask from Goose Facebook group : facebook.com/share/kkg1sCu7kseDLKUa/
What a beautiful sunrise!
This is why I'm a fan of the pivoting center boards as opposed to a dagger board, it'll just swing right back into the boat an do far less damage, provided that your going forwards of course...
100%. I live in a very rocky place and wouldn't have half as much fun without the peace of mind of a pivoting centerboard. Just need to dig chips of rock out of the rudder with pliers on occasion... (A dory's slanted rudder post with sliding pintle is also key here.)
Where's the build videos? :)
kzread.info/dash/bejne/p6WjsrWOj9fZmMo.htmlsi=oVj0xkINlB5mYT5u
That's a kayak... Got the build for the boat in this video?
Had to watch it twice as I could not believe - this magic ! ;-)
Hah, thanks!
So cozy! Where do you sail? It looks like south western Finland. My father was born in Jurva. What kind of camera is on the end of your stick?
Near Jyväskylä, Juva is actually quite close , ca 120km away, close to where my father has born - Anttola. The camera is inta360 camera on end of long selfie stick. ( stick is left on blondi angle so it look like a drone shot )
@@KaamosBoats kitos. My GoPro is on the brink. It keeps going dead just when I need it. I think it’s the battery connection cause if I pull the battery out and back in it works for about 10 minutes.
Crikey, that definitely wasn't sand!
Had to be a stone
Owee! Glad the little man didn't tip overboard! Love your work!
Yep, nothing serious happened..
wow! Have you done any damage to the well?
Only to back edge of the centerboard needs some sanding and epoxy, Nothimg serious...
What about all the gear? 10 liters of water, hammock, tarp, titanium stove, food, etc etc ? another trailer behind that one perhaps? :D
All fits inside the kayak while cycling. When paddling and bicycle os inside- hmm maby not..
Oops❗❗❗
Çok güzel. Ne kadar balast var? Balastı ne ile sağlıyorsunuz?
Hi, no ballast jos youtu.be own weight.
It's brilliant)) I had the same problem when I built the kayak...I found a way out, the front wheels are from a wheelchair. They are just 8 inches, under the inner diameter of the hatch, with a camera
Thanks for comment
This looks like a puddle duck.
Desde Argentina! You are great
Ha Thanks!
Your boat is great, but your camera is a sh..t !
This is pretty cool. You are a very creative fellow. Is this an off-the-shelf tent? If so, would you mind sharing info about it?
Thanks, I drew the tent quite quicly and just sew it.. I think it can be used also without heater
@@KaamosBoats Very impressive that you designed and sewed the tent yourself! You are the designer of the Goose Explorer too, right (as a modification of Storer's Oz Goose)? I would love to see more videos of it. Do you think it is reasonably safe to sail it in protected coastal waters? It looked like the kids who sailed with you in a prior video really enjoyed riding in it on what looked to be a lake (I am trying to inspire my little one to enjoy nature adventures in boats, and I bought the plans). The Ooze Goose (also your design, I think) looked really practical for similar purposes too, but alas it seems to have been retired. Surely those huge flotation tanks would make them pretty safe.
@@Chinchilla27150 thanks, yep
RockStar!!!
Nice!
It is flame retardant, so lets hope it wont burn...
Your ideas work! I've build two yours kayaks and in this summer I will build third - pro a canoe !
@@rafabrodnicki8215 vow, thanks!
Super! Is this special cloth that it is not burning?
How many knots were that speed?
Hi , I dont know or remember. It is quite a long tume a go..
This is Luonteri? Is it the same design as the ones that fit your bicycles?
This is luonteri. Yep, I have fit bicycle with this one and also to shorter one, which I havent make plans. I am drawing bicycle modifications ad on to Luonteri plans which shows bike mods. Thanks Perttu
Thanks for the subtitles!
Wow, not very fast, but very cool!!!
The cabin was the most impressive part for me
How long is the boat?
3666mm , www.kaamosboats.com/goose%20explorer.htm
@@KaamosBoats thank you
Really impressed with the canoe designs which you can paddle and sail including sailing with outriggers. Wow ...! Would it be possible to have a joiner in the middle of the canoe for easy transport? Kind regards Carl from Australia ...
Thanks. It would be possible. Now that canoe is joined nrar Stern, from two full ply sheets lengtg
first
thats the goose explorer? whats the name and where do i get the project
Hi Yes it is. There are also sailing wideo on my Chanel and plans can be found duckworks.com/goose-explorer-plans/
A legjobb nyaralás....
This looks a great build, have you done any capsize tests? I guess you're sacrificing some bouyancy if the cuddy gets swamped
Ho I havent , maybe I Will on nect summer. Cabin hatch should be closed and secured, when there are risk of capsize, then not much water should go inside the cabin. Thanks.
oh wow, that looks fun!
Clever folding design, Top👍
Thanks!
Nice bicycle design!!!
Thanks!
If you don’t mind me asking, what thickness of material are you using?
Hi, 4mm ply