You can always tell the Johnny popper tractor by the sound!😊
@nellsonstout700111 күн бұрын
That’s a straight, later model TR-14 or TR-14A. The serial tag is sadly missing though.
@clarencetrice444211 күн бұрын
the 1ST thing that shouldve been was 2 clean the points and the sparkplugs and check the coil 2 see if its any good and the starter shouldve been took off and had it rebuilt it sounds like its still on the old 6 volt battery its turning the engine over and thats all a old battery is no good either 😮😮 OMG 6 22 2O24
@clarencetrice444212 күн бұрын
don't know if tractor 🚜 😮 has a oil plate on the bottom anything in the engine should fell out and that tractor 🚜 should've had a choke rod it should start up W out using the choke /yall have good fields 4 pull starting tractors if U have 2 😊😊 OMG 6 22 2O24
@hobert49713 күн бұрын
That is what a tractor is supposed to sound like...
@retiredlife84819 күн бұрын
2nd
@LakeEscape-fishing19 күн бұрын
First
@jackgraham339319 күн бұрын
I born in 1941, first tractor I remember was a 39 G. It was an unstyled version, steering gear exposed. By the timee I was 5, I spent many days on that tractor, plowing, haying, etc. We also had a model D that mostly ran the thrashing machine, don't know what year it was, probably 42 or 43. Still have the first tractor I bought new, a 1953 model 70. Also has a 730 and a 4020,all bought new. Can't beat these old machines of iron. Enjoyed your video. Thank you.
@DarkVoidIII20 күн бұрын
That plow should get a complete overhaul, and check all of the hydraulic lines to see that they're all working properly, and aren't leaking hydraulic oil or losing pressure anywhere. It looks like a good plow, a bit of TLC will fix it right up good as new!
@christianworthinton800027 күн бұрын
A bright yellow paint job!🤔👍🇨🇦
@jeffdymarczyk441328 күн бұрын
I would go through whole machine mechanics.Fix what needs to fix and put it back to work.Put a new comfortable seat.Great Tractor,Best of luck 🍀
@paulguodace299319 күн бұрын
Thanks for the tips!
@adamkrolikowski89228 күн бұрын
Ciekawe!@*..
@SchnelleKat29 күн бұрын
Awesome unit! Sure is a dream machine for me. But ain't much use on an Michigan Orchard lmao! Must have an old IRON LUNG Cummins in it. 220 250 275 probably.
@paulguodace299319 күн бұрын
225 hp with a 50 hp turbo. 275hp total.
@LarsDcCase29 күн бұрын
Neat old tractor. This is the first time I heard of Wagner tractors.
Why do some keep calling it Cummings? There is no G in Cummins...😁
@anttimaja9931Ай бұрын
Wagner Power??? Horspower!!
@glennspreeman1634Ай бұрын
Remarkable , especially for 1958! Had to about # 2 or 3 built! Not showing the old girl much quarter, beast alright. What a playground!
@nellsonstout700111 күн бұрын
That’s actually a later TR-14. They were building them in 1956 believe it or not.
@roryheggie7633Ай бұрын
Great video
@brocluno01Ай бұрын
Good video. What a cool old machine 😀
@42lookcАй бұрын
Love that Wagner and plow! Hopefully you can get the plow sorted out. Would love to see it turning furrows again!
@paulguodace2993Ай бұрын
We're hoping to use the plow in August. If we do, I'll make sure to record and post it!
@canvids1Ай бұрын
I operated Wagner container machines with the CN railway back in the 80's and they were new with Cummins engines. Moving Overseas containers. They had six cylinder Cummins. They could do the work but were too big and long Made in the USA. I would have loved to see your Wagner pulling that flat bottom.
@rongrose3746Ай бұрын
What a great project !!
@rudycarlson8245Ай бұрын
Love the videos that you have done! Especially the ones on the model A I do have a question is about this Wagner what engine is in it? Is it possible it is a Detroit? You got yourself a new subscriber
@paulguodace2993Ай бұрын
It is a Cummins 225 horse power with a 50 horse turbo.
@doughboy1966Ай бұрын
What a beast
@4640johnderreАй бұрын
I see you got done with your project. Congratulations.🎉
@mystic24100Ай бұрын
Rebuilt my brother-in-laws 1936 A. Sometimes it would start on the first crank and sometimes it would not.
@davidwhite4474Ай бұрын
If I'm the one you have mentioned me thank you . That's the one I was looking for . My grandfather had one when I was younger .
@paulguodace2993Ай бұрын
Glad we were able to video it for you!
@davidwhite4474Ай бұрын
Thank you both .
@dannyrasdom6119Ай бұрын
Nice tractor s
@hm12460Ай бұрын
You just gotta love a model A.
@michaelbaker826Ай бұрын
That's the greatest video!! Thank you for sharing it. NEAT
@richardschaffling9882Ай бұрын
It sounded great
@haroldadkins770Ай бұрын
Love that old Iron
@russwabuda1556Ай бұрын
we run john deere tractors on our farm. i once asked my uncle if we should get a lightening start tractor. his curt new england reply was if you're too weak to crank, you're too weak to farm. our '39 b is still with us and getting ready for another hay season, her 84th. hearing her run ls like the voice of an old friend.
@paulguodace2993Ай бұрын
That's awesome!
@guyvossen1640Ай бұрын
Pure nostajgie
@DavidBrown-fd8edАй бұрын
Now drive it into my shed.
@j.c.9461Ай бұрын
Yes and ?
@scottcroney1703Ай бұрын
Such a good looking tractor!!!
@paulguodace2993Ай бұрын
Thanks!
@rudycarlson8245Ай бұрын
Model A?
@paulguodace2993Ай бұрын
Yep!
@scottcroney1703Ай бұрын
how much does it cost to restore one of these? i have a 51 model that my great uncle used to have
@paulguodace2993Ай бұрын
If you already have the tractor, you could probably do it for less than $5K. We have less than that in parts and paint on this one. It all depends how good of shape yours is in. Some of the parts can get spendy. We got lucky. Had a good tractor to start with!
@rudycarlson8245Ай бұрын
@@paulguodace2993 could that cracked flywheel that you took off be welded?
@paulguodace2993Ай бұрын
@rudycarlson8245 I'm not sure. I suppose it could screw up the weight distribution and as much as it spins, not sure it would be worth trying.
@randyscott8660Ай бұрын
Always let the big engine spin over until it builds oil pressure before releasing the decompression lever and advance the throttle..
@Duck69969Ай бұрын
Oh a John Deere model A. I have one of those but I need a starter for it
@paulguodace2993Ай бұрын
Get you one and get it running!
@joemueth4077Ай бұрын
Everyone needs a makeover . Show us when she's all prettied up with a new life.
@paulguodace2993Ай бұрын
Stay tuned! Hopefully, within the next week, we'll have it together and running!
@scottcroney1703Ай бұрын
It shakes like the flywheel or the weight in the clutch drum isn't lined up 🤔 the steering wheel shouldn't be shaking that much
@paulguodace2993Ай бұрын
We were just trying to get it out to paint. We'll be getting it all fine tuned when we get it back!
@richarddhutchens6359Ай бұрын
How r u doing seat diamond tuck or roll pleated😊
@paulguodace2993Ай бұрын
We're doing it, order new seat from Steiner Tractor Parts and put them on! LOL!
@richarddhutchens6359Ай бұрын
Nice shop😊
@paulguodace2993Ай бұрын
It's our paint guy's shop!
@richarddhutchens6359Ай бұрын
2 the person painting bike frame, you see what you get when you use spray gun, not a spray can😮
Пікірлер
You can always tell the Johnny popper tractor by the sound!😊
That’s a straight, later model TR-14 or TR-14A. The serial tag is sadly missing though.
the 1ST thing that shouldve been was 2 clean the points and the sparkplugs and check the coil 2 see if its any good and the starter shouldve been took off and had it rebuilt it sounds like its still on the old 6 volt battery its turning the engine over and thats all a old battery is no good either 😮😮 OMG 6 22 2O24
don't know if tractor 🚜 😮 has a oil plate on the bottom anything in the engine should fell out and that tractor 🚜 should've had a choke rod it should start up W out using the choke /yall have good fields 4 pull starting tractors if U have 2 😊😊 OMG 6 22 2O24
That is what a tractor is supposed to sound like...
2nd
First
I born in 1941, first tractor I remember was a 39 G. It was an unstyled version, steering gear exposed. By the timee I was 5, I spent many days on that tractor, plowing, haying, etc. We also had a model D that mostly ran the thrashing machine, don't know what year it was, probably 42 or 43. Still have the first tractor I bought new, a 1953 model 70. Also has a 730 and a 4020,all bought new. Can't beat these old machines of iron. Enjoyed your video. Thank you.
That plow should get a complete overhaul, and check all of the hydraulic lines to see that they're all working properly, and aren't leaking hydraulic oil or losing pressure anywhere. It looks like a good plow, a bit of TLC will fix it right up good as new!
A bright yellow paint job!🤔👍🇨🇦
I would go through whole machine mechanics.Fix what needs to fix and put it back to work.Put a new comfortable seat.Great Tractor,Best of luck 🍀
Thanks for the tips!
Ciekawe!@*..
Awesome unit! Sure is a dream machine for me. But ain't much use on an Michigan Orchard lmao! Must have an old IRON LUNG Cummins in it. 220 250 275 probably.
225 hp with a 50 hp turbo. 275hp total.
Neat old tractor. This is the first time I heard of Wagner tractors.
2024 - Mud Guards - flimsy Plastic 1950 - Mud Guards - 0.5" steel plate
Great video I have TR6 wagner it is also a 1958
That tractor would look nice with a paint job.🤔
Why do some keep calling it Cummings? There is no G in Cummins...😁
Wagner Power??? Horspower!!
Remarkable , especially for 1958! Had to about # 2 or 3 built! Not showing the old girl much quarter, beast alright. What a playground!
That’s actually a later TR-14. They were building them in 1956 believe it or not.
Great video
Good video. What a cool old machine 😀
Love that Wagner and plow! Hopefully you can get the plow sorted out. Would love to see it turning furrows again!
We're hoping to use the plow in August. If we do, I'll make sure to record and post it!
I operated Wagner container machines with the CN railway back in the 80's and they were new with Cummins engines. Moving Overseas containers. They had six cylinder Cummins. They could do the work but were too big and long Made in the USA. I would have loved to see your Wagner pulling that flat bottom.
What a great project !!
Love the videos that you have done! Especially the ones on the model A I do have a question is about this Wagner what engine is in it? Is it possible it is a Detroit? You got yourself a new subscriber
It is a Cummins 225 horse power with a 50 horse turbo.
What a beast
I see you got done with your project. Congratulations.🎉
Rebuilt my brother-in-laws 1936 A. Sometimes it would start on the first crank and sometimes it would not.
If I'm the one you have mentioned me thank you . That's the one I was looking for . My grandfather had one when I was younger .
Glad we were able to video it for you!
Thank you both .
Nice tractor s
You just gotta love a model A.
That's the greatest video!! Thank you for sharing it. NEAT
It sounded great
Love that old Iron
we run john deere tractors on our farm. i once asked my uncle if we should get a lightening start tractor. his curt new england reply was if you're too weak to crank, you're too weak to farm. our '39 b is still with us and getting ready for another hay season, her 84th. hearing her run ls like the voice of an old friend.
That's awesome!
Pure nostajgie
Now drive it into my shed.
Yes and ?
Such a good looking tractor!!!
Thanks!
Model A?
Yep!
how much does it cost to restore one of these? i have a 51 model that my great uncle used to have
If you already have the tractor, you could probably do it for less than $5K. We have less than that in parts and paint on this one. It all depends how good of shape yours is in. Some of the parts can get spendy. We got lucky. Had a good tractor to start with!
@@paulguodace2993 could that cracked flywheel that you took off be welded?
@rudycarlson8245 I'm not sure. I suppose it could screw up the weight distribution and as much as it spins, not sure it would be worth trying.
Always let the big engine spin over until it builds oil pressure before releasing the decompression lever and advance the throttle..
Oh a John Deere model A. I have one of those but I need a starter for it
Get you one and get it running!
Everyone needs a makeover . Show us when she's all prettied up with a new life.
Stay tuned! Hopefully, within the next week, we'll have it together and running!
It shakes like the flywheel or the weight in the clutch drum isn't lined up 🤔 the steering wheel shouldn't be shaking that much
We were just trying to get it out to paint. We'll be getting it all fine tuned when we get it back!
How r u doing seat diamond tuck or roll pleated😊
We're doing it, order new seat from Steiner Tractor Parts and put them on! LOL!
Nice shop😊
It's our paint guy's shop!
2 the person painting bike frame, you see what you get when you use spray gun, not a spray can😮
Spray gun is the way to go!
It’s looking really good!
Thanks!!