I build Junk You may experience different content randomly, that’s because I’m still finding my way on this content creating thing. 👍🏼 so enjoy ; ) Sub if you want.
got a 2015 Chevy lml ltz fully loaded with broke crank for sale
@BoughtToBuild_Күн бұрын
Pm my instagram
@808kahulaa3 күн бұрын
Did you ever diagnose the shake? From other sources, a >4 in drop the yoke can butt up against the trans. Whatever it was hope the truck is going well. Thanks for your content
@BoughtToBuild_3 күн бұрын
Yessir I’m pretty sure it’s the driveshaft angle, I have to shim it up. But trucks been down lately haven’t had time to messing with it and fixing everything. I appreciate you from watching it, Means a lot!
@calebkelly25567 күн бұрын
How do you plan on bolting in the new school seats?
@BoughtToBuild_6 күн бұрын
I haven’t gotten that far yet lol I’m sure ima fabricate some brackets probably
@codya868427 күн бұрын
They make upper control arms with offset bushings to push the top of the tires back out, might just make bushings that do the same
@BoughtToBuild_26 күн бұрын
Yea I found this out after all this lol
@stevencaskey944027 күн бұрын
now you need to get the Titan Rear window Swap and the Sunroof Spoiler Swap for it.
@BoughtToBuild_26 күн бұрын
Yessir 😎
@azizshammari425227 күн бұрын
Is it possible to swap a 2016 dash in a 2009 Silverado?. because I haven’t seen anyone do it yet
@BoughtToBuild_26 күн бұрын
I think it’s easier tbh
@grant31781Ай бұрын
That yellow foam on the firewall will start breaking down and making the truck reek of a crayon smell that gets in your clothes.
@Monsterx13Ай бұрын
probably the stupidest thing I’ve seen putting a L 84 when they have higher and lifter failure rate then the L83 three or regular old ls for the money I would’ve just put a built LS
@KillerRage360Ай бұрын
Can't wait to boost mine, I'm like your set-up. I need to look into getting a Tig welder to make things easier and clean looking. Keep it up 🏁
@BoughtToBuild_Ай бұрын
Yolo right 🤷🏻♂️ tig definitely is nice, if you want perfection though it’s about making sure cuts are nice and hand is steady.
@SlowBuilt5.3Ай бұрын
Bro, you should have just went with the IHC camber correction upper control arms.
@BoughtToBuild_Ай бұрын
Yea definitely, but lesson learned lol everyone told me about these though.
@ethans6.0Ай бұрын
With everything tore apart and gutted would have been chill to add sound and temperature shielding on the sheet metal love this build bratha
@ethans6.0Ай бұрын
Maybe I didn’t catch it in the video, but after I saw you already changed the break pedal you can do the hydro brake that’s connected to the power steering instead of the vacuum brake system with the booster
@ethans6.0Ай бұрын
What did you need for the steering wheel conversion? For example, air bag, clock spring? Where did you connect power for heated steering wheel?
@ethans6.0Ай бұрын
For the glove box scuff if they didn’t come out try using black trim restore/ or the dash(interior) shine/protection
@JoseHernandez-xr6zoАй бұрын
Would you be interested in doing my 05s LLY head gasket and injectors? lol. Here in GA I’m getting charged practically 17k to do the work. Sure it’ll have new PPE pipes, up bridge etc but….. idk if it’s worth the 17k
@BoughtToBuild_Ай бұрын
Yea 17k is a lot I feel, especially being the injectors have to come out anyway so tht should be little to nothing in my opinion. I feel Thts a solid $10-12k job maybe but i definitely don’t know what parts they quoted lol so just a very rough estimate.
@SalvadorQuiroga-ij8ym2 ай бұрын
DO YOU STILL HAVE YOUR 4X4 DASH HARNESS , IM WILLING TO BUY IT. YOU MOTIVATED ME TO DO THE DASH SWAP BUT IM DOING IT IN MY 1993 SINGLE CAB STEP SIDE
@BoughtToBuild_2 ай бұрын
It’s a 4x4 engine harness buddy but yes I still have it
@AustinLedlie-qi2vw2 ай бұрын
Is that white smoke normal for these lml’s
@BoughtToBuild_2 ай бұрын
Oh yea totally
@khalidbakir30162 ай бұрын
I can i do this project in my GMC 5.3 2005 with out changing engine and the new Speedometer will work??
@BoughtToBuild_2 ай бұрын
I’m sure it could be possible but idk how
@travissheehan60822 ай бұрын
Nobody gonna mention it doesn’t even cover the whole door wtf is this
@sunnyyang6722 ай бұрын
Idk man, personally I like keeping the old panels and wrapping them in soft touch/leather fabric. Same with dash and centre console with custom embroidery stitching
@ryanvanbooven71392 ай бұрын
Can you just swap the door panels without doing the dash swap and have it fit?
@BoughtToBuild_2 ай бұрын
Prolly not
@I-TILE2 ай бұрын
Too much nice
@jacobparker98612 ай бұрын
You've made my dreams come to life man words can not express!!!!! It would mean the world if you could do this for me on my truck
@aden61282 ай бұрын
How much negative camber did you have
@Ryder415x42 ай бұрын
Brooo u think I can do it to my 03 gmc yukon xl?
@AndrewLong-xu9cg2 ай бұрын
Have you found a solution for attaching seat belts to the B pillar for new seats?
@BoughtToBuild_2 ай бұрын
07-13 ext cab middle panel and fab the seat belt brackets
@user-vv3ll2ph2i2 ай бұрын
Watching all your videos, late comment but keep up the cool content your awesome.
@BoughtToBuild_2 ай бұрын
Thanks man! It means a lot 😎
@user-vv3ll2ph2i2 ай бұрын
Your awesome man keep going! Congrats on the bike
@JosiahDuenas2 ай бұрын
I want to do it on my 2011😢
@jordanciaramitaro63512 ай бұрын
Why not modify the stock manifolds?
@cullinwilson18242 ай бұрын
Can you swap out the back door panels on a crew cab as well? I’d love to do this swap but not if I can only do my front doors lol
@logangreer36293 ай бұрын
Thanks, Sean O'Malley
@BoughtToBuild_3 ай бұрын
Bruh
@josezuazua79363 ай бұрын
You think a high country interior would follow closely to this?
@BoughtToBuild_3 ай бұрын
It would, the dash is pretty much the same thing
@vreckless8173 ай бұрын
What motor mounts?
@BoughtToBuild_3 ай бұрын
I custom made some, let me know if you need some.
@harizon88623 ай бұрын
First we had Zachary McFarlin puttin 2016 King Ranch interiors into 1999 Fords, then this guy putting 2014 interiors into older Chevys. Now we just need someone who can put a full 4th Gen interior into a 3rd Gen Dodge Ram. And I mean the full interior; dashboard, seats, center console has been done but no gauge cluster or door panels
@hskenyonful3 ай бұрын
Hey how did you mount the engine?
@BoughtToBuild_3 ай бұрын
I made custom mounts, I could sell you the same set I used because I’m going a different route
@eBay3 ай бұрын
looking good!
@MuscleMustang073 ай бұрын
dopes all the plugs just plug in and work?
@BoughtToBuild_3 ай бұрын
It’s all from the same year model truck so yea, just using the 01 shell.
@MuscleMustang073 ай бұрын
@@BoughtToBuild_ so you're saying an 01 and a 2019 cluster and radio all use the same connectors?
@BoughtToBuild_3 ай бұрын
@@MuscleMustang07 no I’m saying I have everything from a 14-19 truck minus the 2001 body/shell. All harnesses are from a 2014-2019 gm truck.
@MuscleMustang073 ай бұрын
@BoughtToBuild_ ahh ok, including like the bcm I guess? Guess I'm just confused how you went about powering them. Do you have a video on that?
@MuscleMustang073 ай бұрын
@@BoughtToBuild_ I'm about to attempt this in my OBS which is why I'm asking
@NardoStarGarage3 ай бұрын
Yes sir . Have you seen any similar crew cab swaps ????????
@AbstractDreamz3 ай бұрын
my L8tTdoes not have the AFM or DFM. L8T is what is going in my 72 Blazer.
@noahhicksdawson50773 ай бұрын
This whole truck looks like a 16yo in his dad's garage got a hold of it
@dmykoleflims90213 ай бұрын
We're are you located, I wanna do a 2019 high country conversation in my 2005 cat eye z71
@BoughtToBuild_3 ай бұрын
Sorry I don’t do customer work
@Gratitude6ixty9ine3 ай бұрын
I wanna shout out the 3 other yt accounts I forgot the passwords to that are also subbed to you 😂😂😂
@BoughtToBuild_3 ай бұрын
I appreciate that 😂
@johndeanda39083 ай бұрын
I need to get on a ft call with you bro i have so many questions
@johndeanda39083 ай бұрын
Just subscribed bro your a fucking Genius
@BoughtToBuild_3 ай бұрын
Thanks man!
@johndeanda39083 ай бұрын
Mannn bro that’s cleanest interior i seen i like it broo how much was the conversion 2k or above less?
@BoughtToBuild_3 ай бұрын
I so far got like $5k in it
@johndeanda39083 ай бұрын
@@BoughtToBuild_ dammit boiiiii thats fucking amazing bro love the videos bro is different you know i had never seen tht or anyone attempt tht i have notifications on so im set for whenever you drop
@BoughtToBuild_3 ай бұрын
@johndeanda3908 I appreciate that homie!
@gonthabeat76713 ай бұрын
Looking pretty good got me wanting to take my whole inside out my 2014 and out it in my 02 when I upgrade the 14 to the high country interior
@BoughtToBuild_3 ай бұрын
Aye you’ll have a pair parts going to waste if not 🤷🏻♂️
@Wayne098313 ай бұрын
Just found your channel a bit ago. Love your work and your imagination. Wanting to do the same to my 06. Keep it up!
@BoughtToBuild_3 ай бұрын
Thanks buddy! Feed back helps a lot so I appreciate your comment.
@Mike1942____4 ай бұрын
Bad ass why buy the new chevys old ones are better
@BoughtToBuild_4 ай бұрын
Exactly!
@dude45124 ай бұрын
is that a old toyota hiace?😭
@BoughtToBuild_4 ай бұрын
Lmao no
@rogerramirezp.58854 ай бұрын
Yo wtf
@BoughtToBuild_4 ай бұрын
Playing peekaboo 😂
@JohnAbrahamOfArmenia4 ай бұрын
I have it in reverse in my s10 the controller is in the ash tray
@BoughtToBuild_4 ай бұрын
Oh really? Fits good?
@JohnAbrahamOfArmenia4 ай бұрын
@@BoughtToBuild_ yeah man fits perfect in mine I don’t have a electronic one though just a manual knob, there is another one that looks like a gauge I’m thinking of getting.
Пікірлер
got a 2015 Chevy lml ltz fully loaded with broke crank for sale
Pm my instagram
Did you ever diagnose the shake? From other sources, a >4 in drop the yoke can butt up against the trans. Whatever it was hope the truck is going well. Thanks for your content
Yessir I’m pretty sure it’s the driveshaft angle, I have to shim it up. But trucks been down lately haven’t had time to messing with it and fixing everything. I appreciate you from watching it, Means a lot!
How do you plan on bolting in the new school seats?
I haven’t gotten that far yet lol I’m sure ima fabricate some brackets probably
They make upper control arms with offset bushings to push the top of the tires back out, might just make bushings that do the same
Yea I found this out after all this lol
now you need to get the Titan Rear window Swap and the Sunroof Spoiler Swap for it.
Yessir 😎
Is it possible to swap a 2016 dash in a 2009 Silverado?. because I haven’t seen anyone do it yet
I think it’s easier tbh
That yellow foam on the firewall will start breaking down and making the truck reek of a crayon smell that gets in your clothes.
probably the stupidest thing I’ve seen putting a L 84 when they have higher and lifter failure rate then the L83 three or regular old ls for the money I would’ve just put a built LS
Can't wait to boost mine, I'm like your set-up. I need to look into getting a Tig welder to make things easier and clean looking. Keep it up 🏁
Yolo right 🤷🏻♂️ tig definitely is nice, if you want perfection though it’s about making sure cuts are nice and hand is steady.
Bro, you should have just went with the IHC camber correction upper control arms.
Yea definitely, but lesson learned lol everyone told me about these though.
With everything tore apart and gutted would have been chill to add sound and temperature shielding on the sheet metal love this build bratha
Maybe I didn’t catch it in the video, but after I saw you already changed the break pedal you can do the hydro brake that’s connected to the power steering instead of the vacuum brake system with the booster
What did you need for the steering wheel conversion? For example, air bag, clock spring? Where did you connect power for heated steering wheel?
For the glove box scuff if they didn’t come out try using black trim restore/ or the dash(interior) shine/protection
Would you be interested in doing my 05s LLY head gasket and injectors? lol. Here in GA I’m getting charged practically 17k to do the work. Sure it’ll have new PPE pipes, up bridge etc but….. idk if it’s worth the 17k
Yea 17k is a lot I feel, especially being the injectors have to come out anyway so tht should be little to nothing in my opinion. I feel Thts a solid $10-12k job maybe but i definitely don’t know what parts they quoted lol so just a very rough estimate.
DO YOU STILL HAVE YOUR 4X4 DASH HARNESS , IM WILLING TO BUY IT. YOU MOTIVATED ME TO DO THE DASH SWAP BUT IM DOING IT IN MY 1993 SINGLE CAB STEP SIDE
It’s a 4x4 engine harness buddy but yes I still have it
Is that white smoke normal for these lml’s
Oh yea totally
I can i do this project in my GMC 5.3 2005 with out changing engine and the new Speedometer will work??
I’m sure it could be possible but idk how
Nobody gonna mention it doesn’t even cover the whole door wtf is this
Idk man, personally I like keeping the old panels and wrapping them in soft touch/leather fabric. Same with dash and centre console with custom embroidery stitching
Can you just swap the door panels without doing the dash swap and have it fit?
Prolly not
Too much nice
You've made my dreams come to life man words can not express!!!!! It would mean the world if you could do this for me on my truck
How much negative camber did you have
Brooo u think I can do it to my 03 gmc yukon xl?
Have you found a solution for attaching seat belts to the B pillar for new seats?
07-13 ext cab middle panel and fab the seat belt brackets
Watching all your videos, late comment but keep up the cool content your awesome.
Thanks man! It means a lot 😎
Your awesome man keep going! Congrats on the bike
I want to do it on my 2011😢
Why not modify the stock manifolds?
Can you swap out the back door panels on a crew cab as well? I’d love to do this swap but not if I can only do my front doors lol
Thanks, Sean O'Malley
Bruh
You think a high country interior would follow closely to this?
It would, the dash is pretty much the same thing
What motor mounts?
I custom made some, let me know if you need some.
First we had Zachary McFarlin puttin 2016 King Ranch interiors into 1999 Fords, then this guy putting 2014 interiors into older Chevys. Now we just need someone who can put a full 4th Gen interior into a 3rd Gen Dodge Ram. And I mean the full interior; dashboard, seats, center console has been done but no gauge cluster or door panels
Hey how did you mount the engine?
I made custom mounts, I could sell you the same set I used because I’m going a different route
looking good!
dopes all the plugs just plug in and work?
It’s all from the same year model truck so yea, just using the 01 shell.
@@BoughtToBuild_ so you're saying an 01 and a 2019 cluster and radio all use the same connectors?
@@MuscleMustang07 no I’m saying I have everything from a 14-19 truck minus the 2001 body/shell. All harnesses are from a 2014-2019 gm truck.
@BoughtToBuild_ ahh ok, including like the bcm I guess? Guess I'm just confused how you went about powering them. Do you have a video on that?
@@BoughtToBuild_ I'm about to attempt this in my OBS which is why I'm asking
Yes sir . Have you seen any similar crew cab swaps ????????
my L8tTdoes not have the AFM or DFM. L8T is what is going in my 72 Blazer.
This whole truck looks like a 16yo in his dad's garage got a hold of it
We're are you located, I wanna do a 2019 high country conversation in my 2005 cat eye z71
Sorry I don’t do customer work
I wanna shout out the 3 other yt accounts I forgot the passwords to that are also subbed to you 😂😂😂
I appreciate that 😂
I need to get on a ft call with you bro i have so many questions
Just subscribed bro your a fucking Genius
Thanks man!
Mannn bro that’s cleanest interior i seen i like it broo how much was the conversion 2k or above less?
I so far got like $5k in it
@@BoughtToBuild_ dammit boiiiii thats fucking amazing bro love the videos bro is different you know i had never seen tht or anyone attempt tht i have notifications on so im set for whenever you drop
@johndeanda3908 I appreciate that homie!
Looking pretty good got me wanting to take my whole inside out my 2014 and out it in my 02 when I upgrade the 14 to the high country interior
Aye you’ll have a pair parts going to waste if not 🤷🏻♂️
Just found your channel a bit ago. Love your work and your imagination. Wanting to do the same to my 06. Keep it up!
Thanks buddy! Feed back helps a lot so I appreciate your comment.
Bad ass why buy the new chevys old ones are better
Exactly!
is that a old toyota hiace?😭
Lmao no
Yo wtf
Playing peekaboo 😂
I have it in reverse in my s10 the controller is in the ash tray
Oh really? Fits good?
@@BoughtToBuild_ yeah man fits perfect in mine I don’t have a electronic one though just a manual knob, there is another one that looks like a gauge I’m thinking of getting.
Hide the wires 😭
lol no doubt