Пікірлер

• 
  @momsmachines54765 күн бұрын

  Thank you!😊. I love him too!❤❤. Somehow, he gets in a lot of my videos!!! He’s so curios. 😅

• 
  @marygreen65 күн бұрын

  I love the black cat assistant!

• 
  @03Chloe15 күн бұрын

  I wonder if I have the honor to ask you to help me introduce our products-global first bread slicer,I believe that it won't let you down.🥰🥰🥰

• 
  @momsmachines547610 күн бұрын

  I buy machines and products that I need for my house and life and just do videos on these. What is the name of your product and brand and I will look at it. If I decide its something I could use, I will buy it and try it out, then maybe do a video on it. Thank you and thank you for watching my videos!

• 
  @momsmachines547622 күн бұрын

  I have gotten the message “minimum three waypoints” for a working area but never too many for a transport path. Let me go back to my machine (and owner’s manual) and see what I can find out.

• 
  @momsmachines5476Ай бұрын

  Thank you for your question. When I started it the first time, the vacuum itself would not take on the cleaning solution. When I called customer service, they had me take out the water and cleaning solution in the base container and put in pure water. I just swished the plain water around to unstick the sensors. Then I put water and cleaning solution back in the container of the base. It worked fine after that!! Let me know if this helps.

• 
  @LolaMelsKitchenАй бұрын

  Did you say you have to use just pure water only?

• 
  @Boodieman7214 күн бұрын

  You can use other cleaning solutions which are listed on the iRobot site

• 
  @glong2720Ай бұрын

  We purchased this unit and discovered the robot would not self-fill from the solution reservoir. We contacted the company who disclosed that they would add the new software and so reregistration was started and it worked fine the first time. On the second charge and return to vacuuming and cleaning, the tank again would not self-fill. Upon calling again the technician asked what type of solution we were using and so I disclosed we were using Bona, that referred to by their company. She asked me to shake the container to energize the sensors. Once again, the unit failed to wash the floor or refill. The next day all the unit would do was vacuum the floor. After just 1.5 weeks we were tired of baby-sitting this unit and called, disclosed our discontent with the unit and requested either a new unit or refund. The technician on the line stated that we had purchased the unit 2.5 weeks prior (I didn't know that warranty started upon purchase not date of delivery) and so either would be my option. I asked if the new unit would start a new warranty due to it being new and that the other unit was defective. She said it would not, that the warranty would be the one where the older unit began. I have seen this type of hold on to the unit until the warranty is up and you have no recourse with RING door Bell. I opted for return with refund and I am in the process of looking at another company. We had the J7 and the mopping unit from Roomba, so we will return to using them until we find another company. I find a great deal of reviews cater to the companies..... possibly because they are sponsored by them....sad. Wish I had the luck you had with yours.

• 
  @momsmachines5476Ай бұрын

  And if you click on the 6:02 in the comments, it will take you to that in the video! I just figured that out!

• 
  @momsmachines5476Ай бұрын

  Not 13:57. He talks about the weights at 6:02! Sorry about that. I’m leaning on KZread too!!

• 
  @momsmachines5476Ай бұрын

  The one in the demo was 3200lbs. He talks about the weights starting at 13:56. Thank you for the question!

• 
  @benswinnen6006Ай бұрын

  If i have a big working area and make 5 smaller work areas in it, can i then make only 1 transportpath that runs through all of the smaller workarea’s? Will that work?

• 
  @momsmachines5476Ай бұрын

  That’s a great and new question!! From what I understand, you have to have a transport path to each working area, but I haven’t tried it with a bigger working area and smaller ones within that. My 550 will not go to an area unless it has a transport path to it. It will say something like “destination not reachable”.

• 
  @momsmachines5476Ай бұрын

  I would try it and see what happens. I’m curious to know!😊

• 
  @TheGhostLV28 күн бұрын

  @@momsmachines5476 Did you try it? I got error at some point that it shows "Too many waypoints", but there is only two paths on same road.

• 
  @momsmachines5476Ай бұрын

  Right on!! It was acting so crazy after the damage….like a rogue automower!! Seems to be acting fine in my test area. The true test is to put it to work for real!!

• 
  @luckspellАй бұрын

  Lightning was like that's so dumb do it in a straight line.

• 
  @tubyrusedaysАй бұрын

  Miter saw works great too.

• 
  @momsmachines5476Ай бұрын

  Which type of miter saw? Compound, sliding or compound sliding? I believe the bread slicer would be best for even slices though.

• 
  @tj5948Ай бұрын

  What is the weight??

• 
  @Jonny._.Ай бұрын

  Thank you, this was a very helpful video 👍

• 
  @momsmachines5476Ай бұрын

  Thank you! I’m learning as well as I’m setting up the mowers and other machines on my channel. Any questions, comments and suggestions are needed and welcome!!!

• 
  @dcfrank93262 ай бұрын

  Hi, do you have to use the reference station with the EPOS?

• 
  @momsmachines5476Ай бұрын

  For my particular Automower, I needed the reference station. I’m not sure about others, but I will check into that. Thank you for your question.

• 
  @dnrspdr03canadian952 ай бұрын

  Idk if you'll respond to this but ive been looking for a good quality deli meat slicer, like sandwhich meat and i see this advertised sometimes as a deli slicer and other times as a bread slicer and ive been wondering if it'll actually cut deli meat, especially since the grooves in the blade are not your typical deli slicing blade.

• 
  @momsmachines54762 ай бұрын

  This is just a bread slicer. The blade has the wave pattern on the edge which is great for bread, but probably not helpful with meat. From what I’ve seen of meat slicers at deli’s and such, the blades have smooth edges. I also think it would be hard to keep clean if you sliced meat with it. I hope this answer helps! Let me know if you have any more questions.

• 
  @RichardFowler-ns7lz2 ай бұрын

  For whatever reason, I’ve created too many transport paths to the same area. Do you know how to delete a transport path so I can try again?

• 
  @momsmachines54762 ай бұрын

  That’s a great question! Go into the automower app, then into maps, and scroll down through all the work areas, stay out zones and the paths to the work areas. When you see the one you want to edit, click on that one. On the next screen, you can make it inactive or delete it. I hope that helps!

• 
  @kgarden89603 ай бұрын

  Very helpful videos with info I haven't seen elsewhere, thank you. You mention you had mounted the reference station on some steps as a temporary solution. Did you have to re-make all the zones when you put up a permanent pole or is it OK to move the reference station? I would like to have a temporary solution for my reference station too, so I can get started, as I will need professional help to mount it on my roof

• 
  @momsmachines54763 ай бұрын

  Thank you for your comment and questions. I went ahead last season and put in all my work areas with the reference station on my "temporary' location, which is on an aluminum ladder. I had planned to replace the ladder with a wooden post at the same location and height. Sadly (and pathetically!), I have not done this. I did remove the box which it sat on since that got wet in the rain and began to fall apart. This made it about 6 inches lower and doesn't seem to interfere with the mower's working ability at all. I was wondering about moving it to a totally new location as well. The owner's manual states that "the items on the map will change position if you move the reference station. Adjust the items on the map or do the installation again in the Automower Connect app." I might just have to move it and see what happens!!!! I remember reading or seeing a video from Husqvarna that does NOT advise putting the reference station on a building or house. I believe they did suggest this in the past, but no longer do. I hope this helps you.

• 
  @kgarden89603 ай бұрын

  ​ @momsmachines5476 Very helpful thank you. I have put reference station on a pole in the best possible position (just so I could get started, my previous Automower 450X with boundary-wire has got old and tired, wire needing repair etc. and I decided to replace it with 520 EPOS ... but the grass needed cutting NOW! so "temporary" for starters). The pole looks an eyesore where it is (I knew it would), so once the grass is under control I want to find best location. Interesting about roof advice; my understanding was roof would be best (might be different here in UK with building materials / building height and elevation of satellites in sky from our latitude ...). I've only had the EPOS a few days but compared to previous 450X it is SO much better. No wire problems, obviously, but the ability to set areas suits me really well, and pattern-mowing covered the whole area in much less time than random did (previously needed 3-days-continuous after break if grass had got long, new EPOS did the whole area in 24 hours). I have a large garden and complex lawn layout / paths etc. I started with mapping perimeter to create one work area, and then did stay-out zones for each flowerbed etc. but I need it to mow different areas in different directions - everything "on the wonk" doesn't look right! - but thanks to your advice I will hold off making all the work areas until I have permanent position for reference station. I will have loads of waypoints and adjusting each will be a lot of effort (unless there is a "Change all THESE by THIS much N-S and THIS much E-W", as I guess they will all be off-by-same-amount; but my experience of Husqvarna APP is that the last 10% of useful functionality is missing, and when I need it that takes 90% of MY time!) I had 5 existing Automowers (4 distinct areas with fences between), and the other area the boundary wire, with all the stay out zones, was too long, so had to split into 2 mowers). The other benefit, for me (which I had not anticipated), is that I can just take the new EPOS mower to one of my other mower zones, create a Work Area, and then I have "cover" for any of the other mowers which get sick / break-a-wire. I can see me replacing all the old ones with EPOS. But I will need to raid a bank!

• 
  @user-tf7ur3fe8f4 ай бұрын

  hey liz how many acres is your 550 cutting total? and how many days does it take to cut it all?

• 
  @momsmachines54764 ай бұрын

  Thanks for the question! The area my mower mows is about 2.12 acres.

• 
  @momsmachines54764 ай бұрын

  It keeps the area mowed, so it goes out each day and mows different areas and is on an auto schedule. I couldn’t say how long it would take since it doesn’t mow like you would mow your grass once a week.

• 
  @bigboybuilder5 ай бұрын

  First thing you need to know is grease is free. Don't believe me work on something you didn't grease.

• 
  @momsmachines54765 ай бұрын

  Thank you for watching and your comment! Can you explain what you mean?

• 
  @pickels1985 ай бұрын

  Very helpful, just purchased a 2022 Renegade RV on the S2RV chassis, going to start putting together similar survival kit. And first I heard of the App, downloading now. Thanks so much.

• 
  @momsmachines54765 ай бұрын

  I’m glad you found the video helpful and thank you for watching!!! Bobby with Freightliner is very knowledgable and helpful. Let me know how you like the app. and also the toll free help number.

• 
  @Runitback4056 ай бұрын

  Too much of a hassle switching pads

• 
  @momsmachines54765 ай бұрын

  I don't find it much of a hassle.

• 
  @judycunningham53096 ай бұрын

  How do set it back to factory default I’d like to remap now that all Christmas mess is put away

• 
  @momsmachines54766 ай бұрын

  I have never set it back to the factory default, but will look into that. I do notice, however, that when I move furniture around, both the S9+ and M6 seem to remap the areas. I usually do the "map everywhere" mode. Also, you can go in and remap different areas and change room dividers, etc.

• 
  @juliequintero53286 ай бұрын

  Hi Liz, does Christine recognize power strips in its path or will it spray no matter what is in its way?

• 
  @momsmachines54766 ай бұрын

  Hi Julie! Thanks for the question. I have a few power strips, but they are not out where Christine will go anyway, so I couldn't answer that question with 100% confidence. However, I do have some carpets (the LLBean waterhog mats) and Christine does not spray these. The mats are lower than my power strip. Maybe I will pull a power strip out and try it!!

• 
  @Foxybiker727 ай бұрын

  Hi Liz can I ask you where you got your tressle keyboard stand from as im busy looking for 1 like yours. Thank you Scott

• 
  @momsmachines54766 ай бұрын

  Hi Scott! Thank you for your question. The Keyboard star is a dual keyboard stand. (You can get stands for up to 4 or 5 keyboards. I believe the brand is Jansen and my brother purchased it from a company call Thomas Music. I hope this helps!

• 
  @francoisplaniol14897 ай бұрын

  Doesnt like a pipe organ.

• 
  @momsmachines54766 ай бұрын

  Its hard to get the full sound through the video. For example, in the video, we talk about the air sounds from the actual pipe organ, but that does not come through on the video. He also plans to upgrade the speakers. Of course, nothing replaces sitting in the church and listening to the organ!!

• 
  @snoolee79507 ай бұрын

  What model MOTU is the MIDI interface? Thanks 🙂

• 
  @momsmachines54766 ай бұрын

  Its a MOTU 5. (I had to go back and ask too.). Thanks for the questions.

• 
  @robertwiebe61457 ай бұрын

  Perfect slice everytime i like it.

• 
  @momsmachines54767 ай бұрын

  Yes! It was surprisingly easy to use too!

• 
  @user-yg2qk3ji9l7 ай бұрын

  Que merda só fala um tempão e não toca, .......

• 
  @kristinfrazee20977 ай бұрын

  So can I just ask the obvious why would we buy a machine like that when we could just use a bread knife?🤷🙋

• 
  @momsmachines54767 ай бұрын

  Thank you for asking that question. I delayed getting a bread slicer for a good many years. As I mentioned in the video, I liked the ones in the grocery store bakeries, but they are huge and slice the whole loaf at one time. We have bean using a bread cutting knife until I finally found this slicer. As @robertwiebe6145 says, it makes a perfect slice every time! It was so easy to use and cut through the bread amazingly!

• 
  @kristinfrazee20977 ай бұрын

  @@momsmachines5476 well I guess that's what you do is find machines right LOL

• 
  @reubx7 ай бұрын

  ​@@momsmachines5476Have knives suddenly lost the ability to cut perfect slices one at a time? Granted, this does offer the thrill of more easily losing a finger...

• 
  @wvan49866 ай бұрын

  What is best about this is that it will cut almost any loaf including sourdough bread which at times can be difficult with a very good bread knife. The blade is below the surface which helps finish the cut in a clean manner. This is very reasonable and seems very practical. Although knives are less expensive.

• 
  @momsmachines54766 ай бұрын

  Very good point on pointing out how the blade on the bread slicer is below the surface! Maybe I will have to have a bread slicing competition between the bread slicer and a knife.

• 
  @steamboat750437 ай бұрын

  Hauptwerk has put pipe organs in the hands of thousands who'd never afford to have one. I retro fitted a number of dead Conn 653 and other consoles with midiboutique controllers to give those old electronic organs a new life with sounds that their designers could only dream off. I also have wired up a number of pedal manuals to provide an economical solution since even the pedal manuals are pricey for set ups just like this one.

• 
  @momsmachines54767 ай бұрын

  Thank you for watching and your comment. All I know is just a plain old piano, so I learned a good deal and enjoyed making this video!

• 
  @MightyMongoosecola7 ай бұрын

  Thanks for the video Liz. What an interesting demo of a self assembled midi home organ. Your bro is truly a Mad Organist

• 
  @momsmachines54767 ай бұрын

  Thank you for watching the video and your comment! The sound is truly amazing in person. He still has a few things to set up.

• 
  @SilentGloves7 ай бұрын

  It is a CRIME AGAINST HUMANITY to use a DX7 as a MIDI keyboard! 🤯 That thing should be belting out the sweet FM tones god intended. 😁

• 
  @momsmachines54767 ай бұрын

  Thank you for your input.

• 
  @LibertyWarrior687 ай бұрын

  Mom's Machines, you might want to rethink that channel name.

• 
  @momsmachines54767 ай бұрын

  Thank you.

• 
  @pharmerdavid14327 ай бұрын

  I was confused by the title, thought he was a she, but his is not hers, and she is not he....he he he!!!

• 
  @momsmachines54767 ай бұрын

  Ha, ha!

• 
  @antoniodalessandro29587 ай бұрын

  Very impressive! A bit of a piety to use the dx7 as a midi controller though :(

• 
  @t55a27 ай бұрын

  It is a good controller due to the ability to send aftertouch and velocity

• 
  @andrewmcbain66617 ай бұрын

  At time 9:10 its mentioned that each mower comes with a unique four-digit pin code. When I bought my EPOS 550H the pin code was on a printed sheet of paper that was inside the mower box. It's pretty easy to miss if you didn't know it was there. I looked for several hours before I realized where it was.

• 
  @momsmachines54767 ай бұрын

  I’m glad you found your code, even if it was after a few hours of looking! I searched and searched as well, but could not find it. I called the dealer whom I bought it from, and they had to call the manufacturer. I finally got it after a couple of days. So if anyone buys a new one, make sure to get the code before you take your Automower home!

• 
  @artorokkonen47077 ай бұрын

  The first time the main circuit board was probably replaced but with the wrong software for the drive wheels. This is why the automower reverses instead of forward. Just reprogramming the main circuit board.

• 
  @momsmachines54767 ай бұрын

  Thank you for this suggestion. I’m not sure what happened when it was fixed the first time, but that sounds correct. We just updated the new software and it was still backing up.

• 
  @artorokkonen47077 ай бұрын

  Start by disconnecting a connector to the loop and see what happens to the LED on the charging station. If it continues to glow with a solid green light, the circuit board in the charging station may be defective.

• 
  @momsmachines54767 ай бұрын

  I will try this next week when I am back at that Automower. Thank you for this suggestion!

• 
  @artorokkonen47077 ай бұрын

  The circuit board in the charging station may be broken even though the light is green

• 
  @momsmachines54767 ай бұрын

  Thank You!

• 
  @kanitdechkhum16907 ай бұрын

  Hi there and thank you for your review . I just bought the s9 and for some reason it doesn’t finish the job . When ever I have the robot do the whole home cleaning it wouldn’t finish I would get a message said cleaning completed but the map would still have white area like the whole room . Could it be my house is not as bright ?

• 
  @momsmachines54767 ай бұрын

  Thank you for your question. I looked back at my finished cleaning map and to see if I have the same thing going on. On mine, it looks like I have areas where the robot has vacuumed before, so they are on the map, but for some reason did not clean. One white area is a bathroom which it has cleaned before, but the door was closed when it did this last cleaning. Another area is a corner of the room where we moved a chair in front of it and the robot could not get to that area. I keep night lights along any areas that are darker so I don't have a problem with it not cleaning in those areas. I hope this helps, if not, I would call customer service and tell them what's going on. Let me know what you find out!

• 
  @DanielAcostaAZ8 ай бұрын

  Glad this has worked well for you. We had four i7+'s and two J7+'s all fail within a year. Roomba's electrical contact design doesn't last and eventually no longer communicates between the robot and the base. We have since moved on to Roborock.

• 
  @momsmachines54768 ай бұрын

  Thanks for your comment. I haven't had any problems with the contacts and charging.

• 
  @momsmachines54766 ай бұрын

  I have only had the S9+, so don't have experience with the i7+ and J7+.. I know several owners of the S9+ and they have had not issues. Thanks for your input!

• 
  @joelwang61348 ай бұрын

  I got the similar problem when hit by lightning. The mower is OK. the circuit board of the charge station was broken, I replaced it and everything works fine.

• 
  @momsmachines54768 ай бұрын

  That's great to hear! I hope they can repair mine. I don't need the mower since I have the 550H, but just want to know.

• 
  @momsmachines54767 ай бұрын

  Thank you again for your comment. I will ask them to check the base station circuit board.

• 
  @BerkianPerformance8 ай бұрын

  Hello The Sticky Notes are where the display unit received a firmware update

• 
  @momsmachines54768 ай бұрын

  Thank you! I will read them the next time I go to their shop!

• 
  @hyperformancellc8 ай бұрын

  Clay was talking about one of these mowers getting struck by lightning!

• 
  @momsmachines54768 ай бұрын

  My mower is definitely damage. I hope they can get it going again.

• 
  @geesocreative5678 ай бұрын

  Great video!!

• 
  @momsmachines54768 ай бұрын

  Thanks!