Sir how did u take the length and breathe of rectangle!!??
@VijethaVardhanRNСағат бұрын
First construct the hexagon, then use a rectangle in such a way that all corners fit inside the rectangle, then measure the size of the rectangle.
@omprakashk3280Күн бұрын
Sir file link?
@VijethaVardhanRNСағат бұрын
solidedge.siemens.com/en/free-software/overview/
@kapilvijay91419 күн бұрын
sir where is the link, i want the files to install
@VijethaVardhanRN9 күн бұрын
solidedge.siemens.com/en/free-software/overview/ Letest version link
@geethasridhar106815 күн бұрын
Sir can you give the software link to download
@VijethaVardhanRN15 күн бұрын
solidedge.siemens.com/en/free-software/overview/
@user-bv5oc4xw1t17 күн бұрын
Sir ,its corner condition
@VijethaVardhanRN16 күн бұрын
Yes it is a corner resting only.
@royalflames653317 күн бұрын
Sir why axis is inclined 41° to VP since the question has mentioned 40° to VP ??? Can't we incline directly 40° to VP ?
@VijethaVardhanRN16 күн бұрын
Hi, 👋 a good question, to explain the concept, the axis is parallel to VP in stage one front view (FV). By stage 2, the axis is inclined to HP, and its projections in top view is a reduced length (apparent length). 30° to VP was the true angle, so we constructed the apparent angle which is 41°.
@SupriyaPriya-zp8eo18 күн бұрын
Tq🎉 sir
@VijethaVardhanRN18 күн бұрын
Welcome
@queenofhearts295624 күн бұрын
Thanks a lot sir Idk how can I pass in this exam if u r not there 🥺
@VijethaVardhanRN24 күн бұрын
Always welcome
@KarishmaRaj-ub2fi25 күн бұрын
🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏TQ uh soo much sir🙏🙏🙏🙏🙏
@VijethaVardhanRN25 күн бұрын
Welcome 😁
@rameshpatil627525 күн бұрын
Sir ur videos are very helpful thank u sir
@VijethaVardhanRN25 күн бұрын
So nice of you
@user-oq6nc5wr4j25 күн бұрын
Excellent lecturing 👏
@VijethaVardhanRN25 күн бұрын
Thanks 👍😊
@MeghaMegha-ws8in25 күн бұрын
Tq u so much sir.. because we have final exams I m seeing only your videos ..very helpful ❤
@VijethaVardhanRN25 күн бұрын
All the best
@shorts.podcast0726 күн бұрын
Thank u sir ❤🎉🎉
@VijethaVardhanRN25 күн бұрын
Most welcome 🤗
@gaganyt997626 күн бұрын
Sir i wish you were with me to teach 😫 But for real ur explanation is next level sir Please make more such videos to help us 🙏☺️
@VijethaVardhanRN25 күн бұрын
Thanks for your positive feedback, yeah sure will create more videos.
@Royal-gamerz0726 күн бұрын
Sir please make on square pyramid
@VijethaVardhanRN26 күн бұрын
It is already available in playlist
@pruthvipruthvitha663826 күн бұрын
Thank you 🎉
@VijethaVardhanRN26 күн бұрын
You’re welcome 😊
@marulasiddappamarulasiddap468926 күн бұрын
Perfect explaining
@VijethaVardhanRN26 күн бұрын
Glad you think so!
@Trisha88426 күн бұрын
Good sir TQ u so muchhhh
@VijethaVardhanRN26 күн бұрын
Welcome
@ashrita131526 күн бұрын
Y beta angle sir
@VijethaVardhanRN26 күн бұрын
Axis is inclined to both HP and VP
@its_arrrpit26 күн бұрын
Why didn't u scale it to 0.816 ?
@shashankb329326 күн бұрын
he did
@its_arrrpit26 күн бұрын
Ohh yaa thanks 😁
@VijethaVardhanRN26 күн бұрын
It was scaled at the end.
@swatim11427 күн бұрын
thankyou sir please make videos on development as well
@VijethaVardhanRN27 күн бұрын
Sure I will
@punitpatil263327 күн бұрын
Thanks bro
@VijethaVardhanRN27 күн бұрын
Welcome
@Trisha88427 күн бұрын
TQ u sirr ..
@VijethaVardhanRN27 күн бұрын
Welcome
@khushibm-qc3js27 күн бұрын
Thank you sir
@VijethaVardhanRN27 күн бұрын
Thanks 👍
@sharanya485027 күн бұрын
Sir how do we get to know we are getting apparent length and we need to cut the arc ??
@VijethaVardhanRN27 күн бұрын
If any line is inclined to both principal planes, then obviously we need to draw the apparent angle
@user-tv8mz2nb7j27 күн бұрын
Sir tomorrow is my caed exam . Im scared a bit
@VijethaVardhanRN27 күн бұрын
Just watch isometric and see the development chapter you can pass
@user-tv8mz2nb7j27 күн бұрын
@@VijethaVardhanRN thank you sir ull really motivate all of us. By the way sir I can pass easily but tge thing is I want to score more marks .anyways sir thank you for suggestion I'll follow the same
@preethis413427 күн бұрын
Thank you so much sir😊
@VijethaVardhanRN27 күн бұрын
Most welcome
@vaishnaviVaishu-eu3kz27 күн бұрын
Sar pls important questions cade
@VijethaVardhanRN27 күн бұрын
Ping me personally
@ArjumanNaz28 күн бұрын
Sir how to cancel copy after copying once
@VijethaVardhanRN28 күн бұрын
Just uncheck the copy option
@VijethaVardhanRN28 күн бұрын
Just uncheck the copy option
@pavithraks987728 күн бұрын
Sir axis inclination+base inclination =90° so we take 50° to HP it is right?
@VijethaVardhanRN28 күн бұрын
Yes absolutely perfect 👍
@SahanaB.S-t7b28 күн бұрын
Sir on which type of problems we need to cut the arc on hp inclination line
@VijethaVardhanRN28 күн бұрын
For all problems you can follow arc method or rectangle method
@DhanushSP_1628 күн бұрын
Thank you sir🙏🏻
@VijethaVardhanRN28 күн бұрын
Most welcome
@ananyaananya123528 күн бұрын
Sir really good appreciate for you sir ❤
@VijethaVardhanRN28 күн бұрын
So nice of you
@user-mg2wk8pt4j28 күн бұрын
Tmw exam ....tqsm fr ur help sir😊
@VijethaVardhanRN28 күн бұрын
Welcome 😊
@VijethaVardhanRN28 күн бұрын
All the very best
@rakshitha35628 күн бұрын
The way you teach is fabulous 👌
@VijethaVardhanRN28 күн бұрын
So kind of you. Thanks 👍
@KarishmaRaj-ub2fi29 күн бұрын
🙏🙏🙏🙏tqsm a lot
@VijethaVardhanRN28 күн бұрын
Welcome 🤗
@swatim11429 күн бұрын
sir it is said corner n u have rested it on edge in 1st step?
@VijethaVardhanRN28 күн бұрын
No it is a corner resting only, see the images properly.
@EC_STATIC_29 күн бұрын
Thank you so much sir ❤️
@VijethaVardhanRN28 күн бұрын
Most welcome
@AmmuAmmu-rc8lg29 күн бұрын
How to check full planes chapter sir
@VijethaVardhanRN28 күн бұрын
You can check this playlist Computer Aided Engineering Drawing (BCEDK103/BCEDK203) as per 2022 Scheme under VTU, Common to all Branches.: kzread.info/head/PLmtkUWvLLBMqjNycXknjpe2elK8ZTHyWM
@AyaanShaikh-uo9tv29 күн бұрын
Sir, why did you reduce only the hemisphere into the isometric scale but not the sphere?
@VijethaVardhanRN28 күн бұрын
In the 4 arc method, the diameter will be reduced. But the diameter of the sphere will never be reduced
@dhananjayff182029 күн бұрын
What if we forgot to trim those unecessary lines ? ? Will they cut marks ?
@VijethaVardhanRN28 күн бұрын
Nope 👎 you can retain the construction lines as thin lines
@user-qf7fl2ym3i29 күн бұрын
Thankyou sir
@VijethaVardhanRN28 күн бұрын
Welcome 😊
@Sinchana-cr3yw29 күн бұрын
Sir atlast when you convert whole into isometric then radius of hemisphere also converted into isoradius ???
@VijethaVardhanRN28 күн бұрын
In the four arc method, obviously the diameter will be reduced, but this is the easiest way to construct the hemisphere
Пікірлер
Sir how did u take the length and breathe of rectangle!!??
First construct the hexagon, then use a rectangle in such a way that all corners fit inside the rectangle, then measure the size of the rectangle.
Sir file link?
solidedge.siemens.com/en/free-software/overview/
sir where is the link, i want the files to install
solidedge.siemens.com/en/free-software/overview/ Letest version link
Sir can you give the software link to download
solidedge.siemens.com/en/free-software/overview/
Sir ,its corner condition
Yes it is a corner resting only.
Sir why axis is inclined 41° to VP since the question has mentioned 40° to VP ??? Can't we incline directly 40° to VP ?
Hi, 👋 a good question, to explain the concept, the axis is parallel to VP in stage one front view (FV). By stage 2, the axis is inclined to HP, and its projections in top view is a reduced length (apparent length). 30° to VP was the true angle, so we constructed the apparent angle which is 41°.
Tq🎉 sir
Welcome
Thanks a lot sir Idk how can I pass in this exam if u r not there 🥺
Always welcome
🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏TQ uh soo much sir🙏🙏🙏🙏🙏
Welcome 😁
Sir ur videos are very helpful thank u sir
So nice of you
Excellent lecturing 👏
Thanks 👍😊
Tq u so much sir.. because we have final exams I m seeing only your videos ..very helpful ❤
All the best
Thank u sir ❤🎉🎉
Most welcome 🤗
Sir i wish you were with me to teach 😫 But for real ur explanation is next level sir Please make more such videos to help us 🙏☺️
Thanks for your positive feedback, yeah sure will create more videos.
Sir please make on square pyramid
It is already available in playlist
Thank you 🎉
You’re welcome 😊
Perfect explaining
Glad you think so!
Good sir TQ u so muchhhh
Welcome
Y beta angle sir
Axis is inclined to both HP and VP
Why didn't u scale it to 0.816 ?
he did
Ohh yaa thanks 😁
It was scaled at the end.
thankyou sir please make videos on development as well
Sure I will
Thanks bro
Welcome
TQ u sirr ..
Welcome
Thank you sir
Thanks 👍
Sir how do we get to know we are getting apparent length and we need to cut the arc ??
If any line is inclined to both principal planes, then obviously we need to draw the apparent angle
Sir tomorrow is my caed exam . Im scared a bit
Just watch isometric and see the development chapter you can pass
@@VijethaVardhanRN thank you sir ull really motivate all of us. By the way sir I can pass easily but tge thing is I want to score more marks .anyways sir thank you for suggestion I'll follow the same
Thank you so much sir😊
Most welcome
Sar pls important questions cade
Ping me personally
Sir how to cancel copy after copying once
Just uncheck the copy option
Just uncheck the copy option
Sir axis inclination+base inclination =90° so we take 50° to HP it is right?
Yes absolutely perfect 👍
Sir on which type of problems we need to cut the arc on hp inclination line
For all problems you can follow arc method or rectangle method
Thank you sir🙏🏻
Most welcome
Sir really good appreciate for you sir ❤
So nice of you
Tmw exam ....tqsm fr ur help sir😊
Welcome 😊
All the very best
The way you teach is fabulous 👌
So kind of you. Thanks 👍
🙏🙏🙏🙏tqsm a lot
Welcome 🤗
sir it is said corner n u have rested it on edge in 1st step?
No it is a corner resting only, see the images properly.
Thank you so much sir ❤️
Most welcome
How to check full planes chapter sir
You can check this playlist Computer Aided Engineering Drawing (BCEDK103/BCEDK203) as per 2022 Scheme under VTU, Common to all Branches.: kzread.info/head/PLmtkUWvLLBMqjNycXknjpe2elK8ZTHyWM
Sir, why did you reduce only the hemisphere into the isometric scale but not the sphere?
In the 4 arc method, the diameter will be reduced. But the diameter of the sphere will never be reduced
What if we forgot to trim those unecessary lines ? ? Will they cut marks ?
Nope 👎 you can retain the construction lines as thin lines
Thankyou sir
Welcome 😊
Sir atlast when you convert whole into isometric then radius of hemisphere also converted into isoradius ???
In the four arc method, obviously the diameter will be reduced, but this is the easiest way to construct the hemisphere
@@VijethaVardhanRN Thank you sir
wt abt freely suspended problems from 13???
Out of syllabus
@@VijethaVardhanRN thank u sir
Your teaching is excellent!!
Glad you think so!
Thank you so much sir !! It's so helpful to me 😊
Welcome 🤗
Welcome 🤗
Thank you so much sir
Most welcome
It is not a beta problem And it us edge condition
Yes you are absolutely correct
Thank you sir 🙏
Most welcome
Thank you so much sir
Most welcome