Пікірлер

• 
  @juice-gotcha833Ай бұрын

  What scale size is this considered?

• 
  @CJR5052 ай бұрын

  Everything is shiny because it’s a new airplane. The real D.VII’s were the same way when rolled off the production line.

• 
  @mrvoyagerm3 ай бұрын

  I've flown mine since they first came out - fabulous plane. I changed the look to match the one Lothar Von Richthofen flew. I also changed the flyscreen on the front to a much larger opening size (1/4" screen) and that helped a lot. Mine flies on an Admiral 60cc equivalent motor, 12s with 150 Amp ESC using a 24x10 Falcon prop. After a few flights I changed out the skid for a tailwheel and it works much better. Very nice flier with a flight stabilizer that comes in handy on windy days. The fact that each pair of upper and lower wings can remain attached while sliding them onto the center section and the fuse is a game changer at the field. Eight minutes to assemble the plane. Fabulous. Hats off to Eli Machninchy on this one.

• 
  @planeben4 ай бұрын

  I do the same thing with any ARF, new or restoring an old ratty flier. Can't stand plastic on scale rag wings.

• 
  @donallen12554 ай бұрын

  I wish you had more detail on edges covering Hanger 9 makes a very fine plane I was impress

• 
  @Warpig03215 ай бұрын

  Anymore progress on this since your last vid? I really want to see!!! WOW VERY NICE!

• 
  @kentnelson75687 ай бұрын

  Nice job

• 
  @davidshelby86107 ай бұрын

  Try an acrylic coat of AK Ultra Matte Varnish...the best true matte finish on the market for models

• 
  @octane20998 ай бұрын

  This is gold

• 
  @petercyr35088 ай бұрын

  I cant believe you recovered and painted but did not add trailing edge scalloping!

• 
  @MarkCroucherRC4fun8 ай бұрын

  Great build

• 
  @Erdie659 ай бұрын

  Great flight!! Can you explain what motor / prop setup are you using, please?

• 
  @n26fe34 Жыл бұрын

  Ist doch kein Projekt..eine ARF Kiste zusammen kloppen..so n Bullshit

• 
  @tommystone4563 Жыл бұрын

  I got one last year and repainted it yellow with a black nose, looks great...

• 
  @wimingevb Жыл бұрын

  mijne is besteld, komt ergens juni 2023, maar wordt brandstof.....

• 
  @MrMadtractor Жыл бұрын

  hey love this videos looks amazing! how did it fly? what’s the status on the dvll

• 
  @airfoilsinmotion4777 Жыл бұрын

  Thank you, it is nice to see the ease with which you program. I might just have to get one for myself🎉

• 
  @zelalortac7935 Жыл бұрын

  You are the best! Thx for sharing

• 
  @Jay-zc7iq Жыл бұрын

  Beautiful flying thankyou for sharing absolutely inspiring good job sir

• 
  @jeremygilbert30052 жыл бұрын

  Hi Egbert, as I have the same ESCs as you, can you tell me how you cool them? I had my first and second flight, sadly at the second flight one ESC reached 100 degrees C and it switched off. I did an emergency landing with luckily minor damage. But I need to cool them in flight. Can you tell me how you do that or give me a suggestion? Always happy landings from Germany, Jens

• 
  @eflaan2 жыл бұрын

  Hello Jens. I don't have any form of cooling for my ESCs. How much amp are you drawing? I use up till 80 amp and never had an issue with the temperature.

• 
  @jeremygilbert30052 жыл бұрын

  @@eflaan Hello Egbert, the motors only draw 60 amps. Can you tell me where your ESCs are mounted and what your max temp was? My ESCs are mounted left and right side on top of the plywood in the fuselage under the middle wing section where the CG is.

• 
  @jeremygilbert30058 ай бұрын

  Hi, just to let you know. My Jeti ESCs were factory faulty, I got new ones ghat are ok now. But I now added some small cooling 😊

• 
  @josec.2782 жыл бұрын

  I can hear a vibration noise that was not in other of your OV10 videos. Prop balance? Beautiful flight by the way.

• 
  @arlingtonburney86742 жыл бұрын

  What's your average flight time? Also, what motors and ESCs are you using?

• 
  @eflaan2 жыл бұрын

  Average flight time is between 8 and 10 minutes. I am using xpwr 32cc motors from extreme flight and jeti mezon ESC

• 
  @timmytom2 жыл бұрын

  Out of interest how much did the covering and painting increase the weight of the model? Looking forward to seeing your video of this flying.

• 
  @eflaan2 жыл бұрын

  I don't know exactly how much weight increase I have. I didn't put it on a scale before the old covering was removed. The plane is flying very nice. There is a short video where you can see it flying

• 
  @ChristianGijselsPilot2 жыл бұрын

  what is the status now ?

• 
  @eflaan2 жыл бұрын

  Everything is a little delayed because of the birth of my daughter. I will post an update shortly

• 
  @ChristianGijselsPilot2 жыл бұрын

  @@eflaan congratulations !!

• 
  @ariane119702 жыл бұрын

  Wenn ich dir ein kleinen Tipp geben darf, ersetze bitte die Xoar mal durch Fiala. Die Xoar haben sich auf meinem Propellerprüfstand in Sachen Schub und Leistungaufnahme als absoluter Müll herausgestellt. Da war jede Hobbyking Billigschraube besser aufgestellt. Eine 16x10 bspw. hatte bei Höchstdrehzahl nur 5,6kg Schub bei 95A ... die selbe Fiala 7,5kg bei 88A. Die Xoar hat bei Vollgas das Flattern angefangen, was man bei dir im Video auch gut hören kann. 😉 Ansonsten Top Baby und schön geflogen ! 🤗

• 
  @eflaan2 жыл бұрын

  Danke schon fur deinen Tipp. Ich mochte das ausprobieren.

• 
  @ariane119702 жыл бұрын

  @@eflaan Die gibt's auch in Schwarz oder Grau . 😉

• 
  @nickanrc2 жыл бұрын

  Well done! Can't wait for maiden flight!

• 
  @eflaan2 жыл бұрын

  Maiden flight is already online, kzread.info/dash/bejne/hK6mltyIYNjAcaw.html

• 
  @josephkerkau25202 жыл бұрын

  Just take some satin clear finish over it and make it dull

• 
  @gdcarter012 жыл бұрын

  Nice review, I agree with you, the gloss should have been matt.

• 
  @jeremygilbert30052 жыл бұрын

  Hello Egbert, one question to your elevator. Did you simply split the cable from the servo via y-cable into two Individual lines and you put them together via a 2nd y-cable in the fuselage so you have one to plug into the receiver? All the best Jens

• 
  @eflaan2 жыл бұрын

  Hello Jeremy. Yes that's exactly what i did. Because there are so many connectors this will eliminate a connection failure.

• 
  @Urria1102 жыл бұрын

  What happened with the f35 project?

• 
  @eflaan2 жыл бұрын

  Work in progress! The next video will be online soon.

• 
  @sachithradhananjaya43032 жыл бұрын

  😍😍

• 
  @jamiesullivan6442 жыл бұрын

  How are you doing the thrust reverse on a twin motor setup? Are you using Horizon's Smart ESCs or another brand?

• 
  @eflaan2 жыл бұрын

  I'm using a Jeti mezon 85 amp pro. They also have a thrust reverse option. They work the same as the horizon's will do.

• 
  @jamiesullivan6442 жыл бұрын

  @@eflaan Thanks!

• 
  @jeremygilbert30052 жыл бұрын

  @@eflaan do you do this with an extra switch or how do you activate it? All the best Jens

• 
  @eflaan2 жыл бұрын

  @@jeremygilbert3005 yes i activate this with a push button on my transmitter. As soon as I push this button my throttle stick will control the reverse rpm.

• 
  @sachithradhananjaya43032 жыл бұрын

  Nice work

• 
  @elandamor2 жыл бұрын

  Just saw this from #RamyRC channel… Had to see the entire video… FANTASTIC!!!

• 
  @eflaan2 жыл бұрын

  Thanks!

• 
  @jorgarciahern2 жыл бұрын

  Nice job, a lot of work. Why dont you directly print a negative 3d piece. Sand, wax and pvc and you have your mold ready?

• 
  @Lino-zd4ft2 жыл бұрын

  What's the propeller you used ?

• 
  @eflaan2 жыл бұрын

  It's a xoar propeller 22x8

• 
  @Lino-zd4ft2 жыл бұрын

  @@eflaan any issues using the prop with the electric motor ? What motor are you using ?

• 
  @eflaan2 жыл бұрын

  No issues at all. A lot of power. I'm using a xpwr40cc from Extreme Flight with 12 s lipo

• 
  @rodeopilot74952 жыл бұрын

  👍 beautiful bird , what flight time are you getting ? And what batteries?

• 
  @eflaan2 жыл бұрын

  Thanks. Flight time is between 8 and 10 minutes. I use 6s 5100 mah gens ace batteries.

• 
  @luiseduardojatarmontano19832 жыл бұрын

  Great explanation!! I have a few questions my dear friend: 1) is the 3d printed vertical stabilizer printed with some infill or is it empty? 2)What is the type of wood you used? 3)Can I use another fiber like for example mat 450 to reinforce the 3d printed part?

• 
  @eflaan2 жыл бұрын

  Thank you! 1 it's printed with some infill. The biggest problem is that the 3d print will start to bend easily. 2 its a multiple layer of wood with a thin plastic top layer. I have no idea how it's called. 3 you can use any kind of reinforcement. It must be able to follow the contour. Good luck

• 
  @luiseduardojatarmontano19832 жыл бұрын

  @@eflaan Thanks a lot, I am developing a similar project but I had had some troubles with the reinforcement, tomorrow I'll try again. Thanks again, it is a great video my friend!!

• 
  @erikkoets2 жыл бұрын

  Hallo Egbert ik heb je zien vliegen op Odoorn in september, super!! Het heeft me doen besluiten ook een Bronco te kopen (die staat nu hier 😃) mijn vraag is welke maat propellors gebruik jij? BTW ik neem aan dat jouw Xpwr30ccv2 motoren dezelfde zijn als de Xpwr 32cc bij Bert ?

• 
  @eflaan2 жыл бұрын

  Hallo Erik. Wat leuk om te horen dat jij een Bronco hebt gekocht omdat je die van mij hebt zien vliegen in Odoorn. Ik gebruik 19x8 electric houten props van xoar. Misschien zou 1 slag groter ook nog kunnen, maar dit gaat dan weer ten koste van je vliegtijd. De xpwr32cc is de opvolger van de xpwr30cc. Wat specs betreft zijn ze hetzelfde, de 32 zou verbeterd moeten zijn als het om duurzaamheid gaat. Als je nog meer vragen hebt mag je me ook altijd bereiken via facebook of instagram als je dat makkelijker vind.

• 
  @jeremygilbert30052 жыл бұрын

  Hi egbert, did you try other propellers with 20" or are you satisfied with the 19x8?

• 
  @renerosentraeger2 жыл бұрын

  Hi Egbert, thanks for this nice little video. I enjoyed it from the beginning to the end. Editing and music fit perfectly. 👍👍

• 
  @eflaan2 жыл бұрын

  Thanks René

• 
  @jeremygilbert30052 жыл бұрын

  Hi, can you tell what flight time you get with your setup? All the best.

• 
  @eflaan2 жыл бұрын

  Approximately 10 minutes

• 
  @jlester422 жыл бұрын

  Very nice. Wish I had done this with mine. How much Oratex did you use ?

• 
  @NickSimoens2 жыл бұрын

  Egbert, wat doe je met dat draadje op 2:54?

• 
  @eflaan2 жыл бұрын

  Nick, daarom controleer ik of de afstand tussen vleugel en stabilo aan beide kanten hetzelfde is. Daarmee weet ik dat het spul haaks staat.

• 
  @hudsonvalleywanderer16112 жыл бұрын

  That landing was perfect. She settled down like a feather

• 
  @hudsonvalleywanderer16112 жыл бұрын

  You have my dream plane! So jealous. haha

• 
  @hudsonvalleywanderer16112 жыл бұрын

  Wow, that low and slow pass was amazing. I got nervous just watching the video hahaha Great flying!

• 
  @craigschray44862 жыл бұрын

  I love the glossy surface

• 
  @monty94632 жыл бұрын

  Oh yeah I forgot to mention. Not sure what country you're in but I wonder if your colour scheme would raise some eyebrows in Germany and Austria. I'm in Australia so it's not much of an issue but I assume it's HG's scheme when he was a WW1 ace. Great livery but.... You know...... the association..... But then again as a modeller you should be free to paint it in whatever scheme you want😁

• 
  @louispetherbridge9754 Жыл бұрын

  Crosses are ok in Germany but the swastika is a no no , German government trying to hide the past - sad

• 
  @monty94632 жыл бұрын

  While I spray everything (often basecoat with two pack hardener -- light, super high pigment so need very little volume, fuel proof and flexible) I LOVE your idea of rolling on paint🥰 for such a model it's ideal and like spraying you can apply evenness and not much paint at that but also on fabric the texture is just right. Great stuff

• 
  @ChristianGijselsPilot2 жыл бұрын

  What is the status Egbert ?