Пікірлер

• 
  @sicsempertyrannis32516 сағат бұрын

  So screwed up they put a 10 cent piece of plastic on with 2 steel rivets that are hell to remove

• 
  @chillvibesonly7205 күн бұрын

  Do you need to attach anything to it or just to the car wheel?😊

• 
  @GarageMahalStuff5 күн бұрын

  Just to the car valve, good to go right away

• 
  @justindilio50088 күн бұрын

  Nice video.

• 
  @GarageMahalStuff8 күн бұрын

  Thank you

• 
  @GarageMahalStuff8 күн бұрын

  Thank you for watching and commenting 😀

• 
  @nogara615611 күн бұрын

  How many pumps would you say is needed to put a good amount of grease

• 
  @GarageMahalStuff11 күн бұрын

  You'll see it kind of plump up... that's when it is enough

• 
  @nogara615610 күн бұрын

  @@GarageMahalStuff thank you . Also, do I have to jack it up? I don’t have a jack

• 
  @nogara615611 күн бұрын

  Mine just started today and i order parts on amazon. Do i have to poke 2 holes or could I just poke 1

• 
  @GarageMahalStuff11 күн бұрын

  You can get away with one, just slow and steady

• 
  @dl94lopez11 күн бұрын

  messy

• 
  @GarageMahalStuff11 күн бұрын

  Clean

• 
  @user-ey5cd5er2q11 күн бұрын

  So it has to be hooked to output for it to even jump start ?.

• 
  @GarageMahalStuff11 күн бұрын

  Output? Not sure what you mean, but it is pretty easy to select mode on the dials.

• 
  @victorresendez265216 күн бұрын

  thnx for the video ! its great and to the point

• 
  @GarageMahalStuff16 күн бұрын

  Thank you and thank you for watching 😀

• 
  @PRO4XKEV17 күн бұрын

  get the OEM oil pan skid plate here.. Z-1 OFFROAD Part #: 50842-7S000

• 
  @jackcampbell736523 күн бұрын

  I went to grab a drink from the cooler in my trunk and I closed it without realizing I put my keys in there and then I had luckily unlocked my doors before putting them in there I was gou g yo take my back seats out to pull the release but you have to pull the release to take the seats out. Thanks for saving me time and money lol

• 
  @GarageMahalStuff23 күн бұрын

  Here to help and glad I could 😀 Thank you for watching and commenting

• 
  @MrDoughboimajic24 күн бұрын

  Does this register what pressure is in your tires currently?? Looking for a bike that can hold 70lbs of air and don’t want the tire blowing up

• 
  @GarageMahalStuff24 күн бұрын

  Yes it does. Easy and great to use.

• 
  @LANCETHEMASTER27 күн бұрын

  My 24 doesnt come with the utiltrak system

• 
  @GarageMahalStuff27 күн бұрын

  Uh oh...

• 
  @IsmAil-fo6hc29 күн бұрын

  thank you for review. after one year of ur post is it durable? any issues ?

• 
  @GarageMahalStuff29 күн бұрын

  We have it for emergency use in our vehicles, however it is our go to bicycle tire inflator 😉 still working and holds a charge for a long time...months.

• 
  @robertomeza635524 күн бұрын

  @@GarageMahalStuff Thanks for sharing it

• 
  @chadntm8189Ай бұрын

  Thank you i was loosin my shit over this. also...who dafuq is snoring lmao ?

• 
  @GarageMahalStuffАй бұрын

  You are welcome and that is Darth... may the Force Be With You

• 
  @petermagugu3828Ай бұрын

  Very educative and now i have confidence and can DIY

• 
  @GarageMahalStuffАй бұрын

  Absolutely!

• 
  @integra8502Ай бұрын

  What do you think happens when it rains around your suspension ??

• 
  @GarageMahalStuffАй бұрын

  Hmm...

• 
  @trevorknell9587Ай бұрын

  Do the bolts from the clamps rub against the vinyl?

• 
  @GarageMahalStuffАй бұрын

  On the top itself? No.

• 
  @trevorknell9587Ай бұрын

  @@GarageMahalStuff thanks!

• 
  @onlyme8870Ай бұрын

  Was the brake holding it if so u can release some tension from the rear to access the tensioner. Made it easy. My axle nut was 30 mm on and 07. I am dealing with the snap ring popping followed new install. Snug the new nut. Spun the NEW drum counter clockwise 10 times while torque to 174ft lbs. The next day noise. Pulled tire 1/2 inch gap took off nut and drum looked inside the snap ring that was factory installed was popped out and the bearing moved in that eztra 1/2 in. I rest the bearing installed the snap ring. Used my other new nut. Same procedure. Next day same thing happened. Not sure if this China made drum is defective from Autozone DuraLast or theres an issue with the hub. I dont see anything like burs or damage but this is odd to happen. I did the other side with a AC delco and no issue in 5 years. This Dura last is a replacement under warranty and its not working. I just dont know how to know if defective or not. But ive already had 2 failures in 2 days with proper torque and installation. Anyone have a thought. If defective ill remove and take back i hope they honor it again becasue nuts are 16 bucks where i am for 1 already went through 2 in 2 days as you can reuse them.

• 
  @GarageMahalStuffАй бұрын

  Did you compare old with new? Sometimes there can be slight difference s.

• 
  @onlyme8870Ай бұрын

  @@GarageMahalStuff they have Autozone here so its a Duralast under warranty the 1st one last less than a year bearing seized. This time goes on flush tighten then spin cc 10x then torque to spec. Doesnt hold. 3 locking nuts later this last time the tire came off. Tonight. The drivers side is an Ac Delco and I put that on and no issue 5yrs already.

• 
  @onlyme8870Ай бұрын

  Had car towed taking the wheel off drum and returning the drum as defective 3x and something isnt right. Maybe the axle. Ill inspect it in the daylight further. I clean it and chdcked for any noticeable damage but im not an expert just diy. I may even skip return and just get another Ac delco drum. Thx.

• 
  @onlyme887020 күн бұрын

  Update went with another AC Delco drum w bearing. Its been a few days since install no issues so far. Now onto the front suspension. Someone hit vehicle while parked bent tierod and control arm and snapped the swaybar link. Thats tomorrow's project.

• 
  @paullouis6902Ай бұрын

  Thanks for the excellent diagnosis! My Model 3 after 4.5 years has developed the identical problem, This helped me to understand exactly what the problem is 🙂 I will be buying the upper control arms from tesla and getting them Installed.

• 
  @GarageMahalStuffАй бұрын

  I'm here to help, glad I could 😀

• 
  @PewpewlasorzАй бұрын

  came for the tips. stayed for darth vader

• 
  @GarageMahalStuffАй бұрын

  May The Force Be With You!

• 
  @kazimohammadzayed5242Ай бұрын

  Hey Everyone, mine is 92k kms on it and it started making this noise. The next service centre is 300 kms from here and the wait time is 9 days. What grease should I use?

• 
  @GarageMahalStuffАй бұрын

  I have all you need in the description

• 
  @kazimohammadzayed5242Ай бұрын

  @@GarageMahalStuff thanks. My mechanic did this and it was all good until the grease started to come out. The squeaky noise is back again. Do you have any recommendations?

• 
  @andrerodriguez7603Ай бұрын

  Of course if your car is still under warranty, Tesla will replace ‘both’ ball joints with updated control arms free of charge, even if just one side is squeaking.

• 
  @GarageMahalStuffАй бұрын

  Under warranty.......

• 
  @gamedia3489Ай бұрын

  I had the same issue on my model 3 long range 2021 and I just fixed it the same way you did it on this video. Thank you so much for sharing the quick solution!

• 
  @GarageMahalStuffАй бұрын

  I'm here to help and glad I could 😀 Thank you for commenting ☺️

• 
  @kennedym548614 күн бұрын

  Any issues since?

• 
  @gamedia348913 күн бұрын

  @@kennedym5486 no issues so far. I think it's good to take out the wheel, free up the control arm and move it around a little bit after refilling for optimal results. GL!

• 
  @josephperez4249Ай бұрын

  What year?

• 
  @GarageMahalStuffАй бұрын

  A while since I made that vid, but I think it was the 2nd gen, but I've run across a bunch of different years that have this.

• 
  @nilesengerman8263Ай бұрын

  Great video. Just started happening to mine. Is this safe to drive on

• 
  @GarageMahalStuffАй бұрын

  If it just started and you do this procedure, it will definitely get you a lot more miles out of it for sure.

• 
  @nilesengerman8263Ай бұрын

  @GarageMahalStuff thank you. It's been gradual. Over a few weeks. Finally realized today it was more than standard tesla noise. Bringing it in 12 days. Should he okay til then??

• 
  @timmryan1351Ай бұрын

  Is there any concern that the seal is broken by the 2 needle holes?

• 
  @GarageMahalStuffАй бұрын

  It is so small it almost "self seals" and the grease pushes through with the positive pressure. We did 30k+ more miles with no issues before we traded it in...

• 
  @user-ey2te5vs3zАй бұрын

  The engineer who designed this oil filter location must have gotten a D. Brutal.

• 
  @GarageMahalStuffАй бұрын

  Right...

• 
  @ericfan1223Ай бұрын

  Tire mounted backwards?

• 
  @ericfan1223Ай бұрын

  Flag facing forward is how it is on the jeep gc wl

• 
  @GarageMahalStuffАй бұрын

  Non directional tires...

• 
  @ericfan1223Ай бұрын

  @@GarageMahalStuff nice to know

• 
  @MustangSamАй бұрын

  I just got one. How do you charge it? I was baffled completely with it until I saw your video. The instructions are terrible.

• 
  @GarageMahalStuffАй бұрын

  It has a C cable, plug into a USB port on a PC or cell phone charging block.

• 
  @MustangSamАй бұрын

  Thanks for the reply . It's funny but I thought it was a larger size from the picture on the ad. I'll give it a try. 👌

• 
  @IsmAil-fo6hc29 күн бұрын

  whats ur opinion too abt it ?

• 
  @MustangSam29 күн бұрын

  I gave it to a friend. I got one of those that looks a gun. You just pull the trigger and there is a gauge on top.Much easier to use.

• 
  @kiltedpiper982 ай бұрын

  I found that after just adding the grease I needed to remove the bolt and move the pin around for a while. The two of those fixed it right up. Thanks!!

• 
  @GarageMahalStuff2 ай бұрын

  Here to help, I'm glad I could, 😊 thank you for watching and commenting

• 
  @thomasritter15392 ай бұрын

  This can’t cause any problems in the future can it?

• 
  @GarageMahalStuff2 ай бұрын

  This is a temporary fix, it will definitely extend the life of the ball joint and control arm, but at some point, it will have to be replaced.

• 
  @mrkeopele2 ай бұрын

  one of the greatest convenience items for inflated tires ever, thank you, there is one rated to 260 which will do air suspension also, just fantastic!!

• 
  @GarageMahalStuff2 ай бұрын

  Thank you

• 
  @bdavis78012 ай бұрын

  Thank you!!!

• 
  @GarageMahalStuff2 ай бұрын

  Thank you for watching and commenting 😀

• 
  @bidhanpatel49792 ай бұрын

  very nice , thank you very much my friend, you save me tone of money ....

• 
  @GarageMahalStuff2 ай бұрын

  Here to help, glad I could, Thank you for watching and commenting 😀

• 
  @SCORE11062 ай бұрын

  The book says 6.6 quarts for 1.5 motor

• 
  @GarageMahalStuff2 ай бұрын

  I always check the dip stick afterwards and 5 quarts is right at the full line...

• 
  @aliislam5802 ай бұрын

  Thank you so much for this informative video- quick question, what do you do about the exposed holes you’ve poked? doesn’t it leave space for contamination or leakage?

• 
  @GarageMahalStuff2 ай бұрын

  The holes kind of "seal" themselves with grease and pressure of the rubber. Again, a bandaid, however this got me more than 36k+ miles more before I replaced the control arms.

• 
  @alantzul18792 ай бұрын

  @@GarageMahalStuffhow much did it cost to replace arms?

• 
  @michaeltheoret89202 ай бұрын

  And if the button doesn’t work what I have to do?

• 
  @GarageMahalStuff2 ай бұрын

  Make sure you have power to the car, jump from the front engine compartment

• 
  @Youngandsuccessful332 ай бұрын

  Just saw this video uploaded by you on our Facebook group and I’m just curious to know this is a temporary fix but ultimately we would have to get new parts right?

• 
  @GarageMahalStuff2 ай бұрын

  It's like a super band-aid, but I went another 36k before I ultimately changed them out.

• 
  @Youngandsuccessful332 ай бұрын

  @@GarageMahalStuff well it was raining super hard out here in Washington. I put some in still makes some noise. I’ll try to see if I can put more in tomorrow.

• 
  @rogerklurfeld883 ай бұрын

  I own a 2018 Model 3. A few months ago I ran through a few inches of rain in a construction zone. Squeaking started, then stopped, and recently came back. So at the end of March 2014 I took it to Tesla service. The technician knew immediately it was the driver side upper control arm. Apparantly it happens often and the part had been re-designed 3 times since 2018. Two years ago Tesla applied a urathane sealent to both front upper control arms, but it didn't last. This time Tesla replaced both front upper control arms (they need to be replaced as a pair). My car is two years out of warrenty, so I expected to pay for the repair. Tesla charged me $180 for the parts ($90 each) and ate the installation labor (no charge for the 1.02 hours). Tesla also charged me $20 to make a EPAS alignment check. So it cost $200 to fix the problem. All in all, I thought Tesla was very nice to comp the installation labor. By the way, JD Power says the price range for a control arm is $220 to $530 and installation labor adds $150 to $200. So Tesla charging a total of $200 for the job, including an alignment check, is fabulous.

• 
  @GarageMahalStuff3 ай бұрын

  Good info. Little grease, needle and 10 minutes you could have saved a few bucks... but yes, temp. Fix.

• 
  @thesingingshrink3 ай бұрын

  Used a grease needle to inject fresh grease into the rubber housing on the ball joint, then used a lot of silicone lubricant on the control arm joints where they connect to the vehicle body (looked a bit rusty). Still squeaking the next day, but drove about 100 miles and all squeaking/creaking is now gone! I removed the tire to get a little more room for the spray can, but i don't think it was necessary.

• 
  @GarageMahalStuff3 ай бұрын

  Good feedback 😀

• 
  @iaroslavlysenko86213 ай бұрын

  need spry for nose operator

• 
  @GarageMahalStuff3 ай бұрын

  I have a video coming on that 😉

• 
  @daseface51153 ай бұрын

  Did this earlier today on my 2019 Tesla model 3. It wasn’t until I took the car for a ride for a few hours after applying the oil treatment when I noticed the squeaking stopped. It would be an understatement to say this video was very helpful. Thank you

• 
  @GarageMahalStuff3 ай бұрын

  Glad it was able to help 😀

• 
  @leesauriol58663 ай бұрын

  P r o m o s m

• 
  @GarageMahalStuff3 ай бұрын

  Yes

• 
  @shauncorless89653 ай бұрын

  Just bought one ,,,come in very handy 😅,

• 
  @GarageMahalStuff3 ай бұрын

  I put one in each of my children's cars... lifesavers!

• 
  @Leeandemma884 ай бұрын

  Thank you very much for this video. You have just save me a lot of time and effort 👍 just ordered my needles now. Got to ask though is Darth Vader recording this video for you 🤣

• 
  @GarageMahalStuff4 ай бұрын

  Thank you and may the Force Be with You!

• 
  @lowfuel60894 ай бұрын

  The link to the grease no longer works, can you provide a new one?

• 
  @GarageMahalStuff4 ай бұрын

  Yes, I see that... updated 😀

• 
  @maibanguyenalex4 ай бұрын

  Hi, will oil leak again ?

• 
  @GarageMahalStuff4 ай бұрын

  Oil leak? But this is a temporary fix and or preventative maintenance

• 
  @maibanguyenalex4 ай бұрын

  @@GarageMahalStuff thanks

• 
  @rubenperez47264 ай бұрын

  I did it. Problem solved. Thank you so much

• 
  @GarageMahalStuff4 ай бұрын

  Excellent 😀

• 
  @wilsontrygg79284 ай бұрын

  💖 Promo-SM

• 
  @GarageMahalStuff4 ай бұрын

  Nothing wrong with self prom ✨️ 😌

• 
  @joelpena82124 ай бұрын

  This is sad my 2021 Tesla model y LR with only 49.5k miles and it’s doing this after a snow storm here in nyc, it’s funny that the warranty is about to expire in 500 miles and the next available appointment is in 2 weeks

• 
  @GarageMahalStuff4 ай бұрын

  Press the dealership, if you are that close they should honor it... otherwise use this as a way to make it last longer.