Get some height for the drop to form into a sphere. Look into how shot towers worked
@Chad-Giga.Ай бұрын
Not very ethical?
@JohnSmith-nh9vr5 ай бұрын
What did you use to stop sticking to the metal ramp ?
@vdog479911 ай бұрын
I love it! Thats how I melted my first batch of lead. With a weed burner
@mwnciboo Жыл бұрын
You could grade the shot with meshes... then empty each layer to Grade to more consistent shot.
@kengordinier6318 Жыл бұрын
Remington use to make turkey shot that was 2x4- 2x5 shot size called duplex worked great on turkey out to 40 yards out of my Rem 870, with a tight turkey choke .660 wished they would bring it back the shot was copper plated
@cory4cali Жыл бұрын
Lawrence makes copper plated shot #4-#7 when available, copper plating does help alot
@UNKNOWNALIEN34 Жыл бұрын
Hey it may be a short video but it got the job Done Thanks man. Ima new learner on these CNC Machines. Andi just got done replacing the mother brushes.
@roberttolliver9402 Жыл бұрын
Sweet! Thank you!
@wildrangeringreen Жыл бұрын
increase the drop to 3 feet or so, they should come out round. Then get sieves to grade out the sizes.
@rogerlibby14613 Жыл бұрын
This is correct. There is a reason for shot TOWERS.
@bobsunkees33922 жыл бұрын
Okay this is an old welding teacher in me less heay just enough to barley melt the Lead the Lead balls that drop need to make contact 3 times before they hit the water ps the water should be no more than 1/4" from that lip you will be very happy with it .
@erik0419822 жыл бұрын
You did a lot better then me! I was impressed
@cory4cali2 жыл бұрын
Lol think what helped me most was the chalking the slide, wanted to try a grooved slide to see if that would roll a better ball.
@luiscasaleiro38462 жыл бұрын
Podias vender me chumbo
@zakariazaki75132 жыл бұрын
Thanks for video keep going 🤠 greeting from Morocco
@thetobaccoguy17512 жыл бұрын
That is the coolest thing I've seen in a month. And I watch some crazy stuff. You seriously should market a cheap kit of some kind. I'd pay. I'm sure you could use a screen system to somewhat sort the shot sizes.
@cory4cali2 жыл бұрын
Thanks, Was a fun little project I did with junk I had laying around lol.
@vizprave67212 жыл бұрын
lets troll the state lmfao
@bobwolf18112 жыл бұрын
What do you mean that it is 'not very ethical?' I see nothing unethical about making your own shot.
@cory4cali2 жыл бұрын
Hey Bob, Funny story, made this video years ago and was thinking practical, but came out ethical. Makes no sense don't feel like editing it. Thanks for viewing
@bobwolf18112 жыл бұрын
@@cory4cali That makes sense. I figure you meant something else.
@nixonringmiso1383 жыл бұрын
Is it water or oil?
@cory4cali3 жыл бұрын
It was water
@danieln39992 жыл бұрын
I think you want something more viscous so the shot moves more slowly though the liquid as it goes to the bottom. I see people using fabric softener but have also heard ethylene glycol will do as well. Keep it moving with a bilge pump or aerator pump so it cools evenly.
@priyacreation95843 жыл бұрын
What's the price
@michaelpriest62423 жыл бұрын
Sort it with various sizes of screen. Viola! The iconsistency problem is solved.
@eielson19783 жыл бұрын
I don't see anything that Jeff Foxworthy would comment about. No-One I've Seen So Far is using a Metal Paint Roller Tray with a Piece of Angle Iron laid around the Inside of the the Tray and a Slab of Steel Lining the Bottom as the Heat Sink!!
@eielson19783 жыл бұрын
Shot Inconstancy may be because of the Long Drip tray and a little to much heat. You may want to angle your Torch a bit further back on the Tray.
@user-sw6kx8sb3c3 жыл бұрын
I want to buy this HOW match
@saltcreekammo3 жыл бұрын
Looks like the shot Winchester puts in their shells.
@rosierojas77574 жыл бұрын
If you want consistency with what you got, just run them through a screen, I like this, you have variety of sizes that way
Пікірлер
Get some height for the drop to form into a sphere. Look into how shot towers worked
Not very ethical?
What did you use to stop sticking to the metal ramp ?
I love it! Thats how I melted my first batch of lead. With a weed burner
You could grade the shot with meshes... then empty each layer to Grade to more consistent shot.
Remington use to make turkey shot that was 2x4- 2x5 shot size called duplex worked great on turkey out to 40 yards out of my Rem 870, with a tight turkey choke .660 wished they would bring it back the shot was copper plated
Lawrence makes copper plated shot #4-#7 when available, copper plating does help alot
Hey it may be a short video but it got the job Done Thanks man. Ima new learner on these CNC Machines. Andi just got done replacing the mother brushes.
Sweet! Thank you!
increase the drop to 3 feet or so, they should come out round. Then get sieves to grade out the sizes.
This is correct. There is a reason for shot TOWERS.
Okay this is an old welding teacher in me less heay just enough to barley melt the Lead the Lead balls that drop need to make contact 3 times before they hit the water ps the water should be no more than 1/4" from that lip you will be very happy with it .
You did a lot better then me! I was impressed
Lol think what helped me most was the chalking the slide, wanted to try a grooved slide to see if that would roll a better ball.
Podias vender me chumbo
Thanks for video keep going 🤠 greeting from Morocco
That is the coolest thing I've seen in a month. And I watch some crazy stuff. You seriously should market a cheap kit of some kind. I'd pay. I'm sure you could use a screen system to somewhat sort the shot sizes.
Thanks, Was a fun little project I did with junk I had laying around lol.
lets troll the state lmfao
What do you mean that it is 'not very ethical?' I see nothing unethical about making your own shot.
Hey Bob, Funny story, made this video years ago and was thinking practical, but came out ethical. Makes no sense don't feel like editing it. Thanks for viewing
@@cory4cali That makes sense. I figure you meant something else.
Is it water or oil?
It was water
I think you want something more viscous so the shot moves more slowly though the liquid as it goes to the bottom. I see people using fabric softener but have also heard ethylene glycol will do as well. Keep it moving with a bilge pump or aerator pump so it cools evenly.
What's the price
Sort it with various sizes of screen. Viola! The iconsistency problem is solved.
I don't see anything that Jeff Foxworthy would comment about. No-One I've Seen So Far is using a Metal Paint Roller Tray with a Piece of Angle Iron laid around the Inside of the the Tray and a Slab of Steel Lining the Bottom as the Heat Sink!!
Shot Inconstancy may be because of the Long Drip tray and a little to much heat. You may want to angle your Torch a bit further back on the Tray.
I want to buy this HOW match
Looks like the shot Winchester puts in their shells.
If you want consistency with what you got, just run them through a screen, I like this, you have variety of sizes that way
Nice video. Tim [email protected]
какая цена?
very helpful
That won't work on newer machines
Set up the dripper up higher. The lead shot needs time to fall and form into balls
This
How did you make your drippers? What could I use to make my own
best one so far. Yo gave me a good idea
I wonder what's "not very ethical" about making your own shot.
Me too
In the back c of oils for car
hello which kind of plate u r using and lead is not pasting on it. please confirm me.
NADEEM BUTT I was using regular mild steel 4140 or close to it, sanded smooth and coated with soap stone or chalk for the ramp
What size shot?
Looks like #6
simplicity is always good.
voce pode me esplicar como fazer esferas de chumbo
I drilled the holes with a #69 drill bit which came out to about a .028 hole.
Did you make your dripper bolt? If so what size did you drill it to? Good job, it worked! Now all you need is to fine tune it...