Пікірлер

• 
  @rolesroys1220 сағат бұрын

  Can add on hobby egle gyro A3 super 4

• 
  @tedh1733 күн бұрын

  Great crosswind landing.. 9.5 score.

• 
  @greenie434 күн бұрын

  Bbb b🧈😎👍

• 
  @carbidedge10 күн бұрын

  Another Great Video, Thank you

• 
  @ChunkyC_RC12 күн бұрын

  Very nice buddy 👍🏼Thanx!!!

• 
  @8HrToGo11 күн бұрын

  Glad you enjoy it. Thanks.

• 
  @jeffreynelson93312 күн бұрын

  Happy Independence Day

• 
  @carbidedge13 күн бұрын

  What a super video, good speed, easy to follow, well done, keep up the good work.

• 
  @8HrToGo12 күн бұрын

  Glad you enjoy it. Thanks for the kind comment. Happy 4th!

• 
  @359bullrack14 күн бұрын

  Smooth landing

• 
  @SuspicousTrashcan17 күн бұрын

  I thought i was war thunder for a sec

• 
  @tedh17318 күн бұрын

  Awesome.. nice camera work!

• 
  @Skelevon_gaming25 күн бұрын

  All we need is the brrrrrrrt

• 
  @randallpatrickc27 күн бұрын

  Good job one of the best videos on this subject

• 
  @8HrToGo26 күн бұрын

  Glad you enjoy it. Thanks.

• 
  @olaf20011Ай бұрын

  Do you know how to update the Rx firmware with a redundancy satellite Rx connected via SBus? Have a TDR18 and a TDMX as satellite (SBus in). When following all the steps as usual the Rx for which the FW update is intended will not be recognized. Any idea how to update in this setup?

• 
  @8HrToGoАй бұрын

  Try doing it separately, pull out the TDMX and update each receiver OTA separately, then reconnect once done.

• 
  @flyrightrcАй бұрын

  Just found your channel looking for FrSky Ethos tips. Amazing videos. Keep up the great work.

• 
  @8HrToGoАй бұрын

  Awesome, thank you for tuning in.

• 
  @ohiorc5586Ай бұрын

  Little too high alpha haha

• 
  @JM-vz7qpАй бұрын

  Awesome job! Thanks for sharing.

• 
  @8HrToGoАй бұрын

  Awesome, thanks for tuning in.

• 
  @olegmerkel597Ай бұрын

  RESPEKT 👍👍👍👍👍👍

• 
  @8HrToGoАй бұрын

  Thanks! Awesome.

• 
  @juanmmondillo7347Ай бұрын

  Thank you for the video, I will follow it step by step since I am very new to frsky but I am working to get things started with my radio and all frsky components. This video also helped me set up the multiprotocol so that I can use other receivers that are different brands. Fantastic information, thank you so much.

• 
  @8HrToGoАй бұрын

  You will like FrSky as many are transitioning to. Thank you for your kind comments.

• 
  @elifnursuleymanefe9619Ай бұрын

  link of the site?

• 
  @8HrToGoАй бұрын

  kzread.info/dron/R9SVT9FUCMChKNX9KQD3lw.html

• 
  @kimgj3072Ай бұрын

  모형비행기 ..ㅋ

• 
  @user-jr1bl6tc3kАй бұрын

  Not top gun son slow & steady catchee monkee😅

• 
  @christinepierce7560Ай бұрын

  👩‍🎤 Practice Practice Practice 👍🛬🛫

• 
  @charlieboutin3341Ай бұрын

  Damn looks like the real deal! Great replica! 👍👍👌

• 
  @jerryf5931Ай бұрын

  I would say he’s not on a stable approach……I guess wind sheer isn’t helping either.

• 
  @johnthee4300Ай бұрын

  Try touch and go

• 
  @michaelpeck8677Ай бұрын

  Not flying the TD yet but still helpful to watch. Your previous videos have helped me a lot. I do have one question. When I loaded the lua script for the SR10+ it created SRx Stable and SRx Calibration modules but did not create SRx Basic as shown in your video. Did something go wrong with the lua file load and, do I need SRx Basic? Keep up the great videos please.

• 
  @8HrToGoАй бұрын

  The SRx Basic is used with a RB Mixer, so you don't need it. But you should see it on your radio after u copied it over from PC. You can try to copy it again and see.

• 
  @afterburnerrc6333Ай бұрын

  Great video, FRSKY should pay you to make setup vids! I like how you went through the steps very quickly but made sure to emphasize information where needed. The stabilization mode can be tricky, is it better to check direction of flight surfaces first and invert where needed than run the self check or run the self check and then invert flight surfaces where needed? Also, I don't understand why FRSKY can't just do the calibration setup when the receiver is in the plane, like Spektrum, it just seems like a waste of time.

• 
  @8HrToGoАй бұрын

  Yeah I wish.. but I enjoyed doing these hobby videos to share with colleagues, friends and families, and for myself to go back to when forget things.. anything after that is bonus. For setting up stabilization mode.. please do the self check first along with verifying direction of flight surfaces as you move the receiver/plane to correct behavior to make sure gyro is working.. Then after that, get out of the script, and go back to the Outputs icon, and verify direction of flight surfaces normally. You can refer to the video (Howto setup Canards, Elevons plane with SR10+ FrSky #Stabilizer receiver) I attached in the description to see a similar setup on a full airplane with a similar FrSky SR10+ receiver (about at 7:00 minute mark). Thanks.

• 
  @kristanleАй бұрын

  You are very clear and helpful. 👍

• 
  @8HrToGoАй бұрын

  Awesome, thanks for tuning in.

• 
  @Colt-4570Ай бұрын

  Good video! It helps to have straight forward step by step visuals for things like this. I haven't done stabilized receivers yet, but your video makes it much less worrisome. Thanks!

• 
  @8HrToGoАй бұрын

  Thanks for watching. The FrSky receiver and stabilize feature are solid.

• 
  @ALonelyCorsairАй бұрын

  Where to buy this?!

• 
  @jhue73Ай бұрын

  it would be nice to be able to bluetooth to the pc and use as a game controller

• 
  @FatGuyFliesRCАй бұрын

  Thanks so much for this!

• 
  @8HrToGoАй бұрын

  Glad you enjoy it. Thanks.

• 
  @Darren-RC-videosАй бұрын

  That has come out really well, i like your weathering of it, I'm thinking of getting one of these myself.

• 
  @8HrToGoАй бұрын

  Go for it, T34 is a very good running tank model without de-tracking.

• 
  @nigelhutt99212 ай бұрын

  Looks fantastic

• 
  @8HrToGo2 ай бұрын

  Happy u like it. Thanks.

• 
  @wladimirrezende14752 ай бұрын

  Amazing tip. Thank you Sir.

• 
  @8HrToGo2 ай бұрын

  Awesome, thanks.

• 
  @rcrotorfreak2 ай бұрын

  :) Thank you for taking you're time to make a video. I just got a x20s red from Frsky Steve :)

• 
  @Aero_Rc.2 ай бұрын

  Sweet ! Is this hemet?

• 
  @8HrToGo2 ай бұрын

  Yes

• 
  @frankyesjosh5872 ай бұрын

  Hi , can you give us ,the lenght and winspan of this georgous plane (without engine ) please ? thanks a lot

• 
  @8HrToGo2 ай бұрын

  Wingspan 60 inches. Length (without motor) about 52 inches.

• 
  @frankyesjosh5872 ай бұрын

  @@8HrToGo thanks

• 
  @user-iq6wz8cl5l2 ай бұрын

  Looks like a toy plane. ?

• 
  @8HrToGo2 ай бұрын

  RC turbine jet.

• 
  @user-rm7ip9tj1o2 ай бұрын

  RC

• 
  @8HrToGo2 ай бұрын

  👍

• 
  @LouisPerez-rm2so2 ай бұрын

  Toy plain 😂😂😂😂😂😂

• 
  @8HrToGo2 ай бұрын

  RC turbine jet.. closest to real jet.

• 
  @1Ocqueoc2 ай бұрын

  Bennett Field, Las Vegas??

• 
  @8HrToGo2 ай бұрын

  @Hemet, CA.

• 
  @Robyrob77712 ай бұрын

  Very sexy plane!

• 
  @8HrToGo2 ай бұрын

  Viper all the way😃

• 
  @doughughes51072 ай бұрын

  Not a frog!

• 
  @banyuarka91182 ай бұрын

  Samsung Galaxy A 10 hadir bro

• 
  @BOBANDERSON51502 ай бұрын

  AWESOME VIDEO!!! I never really understood the telemetry side of the receiver. Thanks for sharing.

• 
  @8HrToGo2 ай бұрын

  Thanks for tuning in!

• 
  @briandesmond41532 ай бұрын

  Let's put a cut out of James Bond in there. 😎👍🏁

• 
  @ElseysEmpireRacing3 ай бұрын

  I can't get mine to work. The full page says Zavionix Cells at the top but just a grey screen. I tried other scripts and get "Please use full screen" (in yellow) even though I have. This is ETHOS V2.5.4, the latest version. Any help is appreciated.

• 
  @8HrToGo3 ай бұрын

  Sorry, I havenot use Ethos1.5.4 as waiting to be stable, as for Zavionix, you might want to check out on his page if the has the latest script.

• 
  @7demo7review3 ай бұрын

  Can you make a video linking the elevator to crow mode… meaning when you use more elevator it increases the crow. I’m wanting to use it for high alpha like the videos from John on the 2 brothers rc channel

• 
  @8HrToGo3 ай бұрын

  Sorry, not sure who John you mentioned is.. maybe he has a video of how to do it (I do know a John V. from Bay Area that fly turbine). Yes, but I will look into it. Thanks.

• 
  @Natesh-ShankaraanandАй бұрын

  it's really easy, just make a free mix in the mixer menu, set the source as channel - elev - then create a curve,- expo - , then set 2 channel outputs for the 2 ailerons( usually ch 1 and ch 6).. then that's it! just check that your ailerons are going the right way up or down, reverse channels accordingly if need be..

• 
  @rickfeith63723 ай бұрын

  I can’t find that bottle of Mop & Glo that you are using…does anyone have any idea what else I could use or what is the equivalent? Everything smells like lemons. NELP!! What is Mod Podge? That’s a funny word. Anyone….?

• 
  @8HrToGo3 ай бұрын

  We got Mop Glo via Amazon, but you can also use those Minwax that everyone used. Thanks.