Пікірлер

• 
  @taneryanci91553 күн бұрын

  Ustam ugraşmana gerek yok basit bulaşık veya çamaşır makina muslugundan ya hava bas yada 5 litrelik bir bidonla su dök çözüm basit biz bu şekil buluyoruz

• 
  @user-pe6tr8se6b8 күн бұрын

  have you a hilti part number for the item you replaced. hilti refusing to give me parts diagram and part numbers

• 
  @user-ej4ku1sr5e8 күн бұрын

  Good job

• 
  @cosmos6538 күн бұрын

  Le ciseau a raison de se coincer ce qui t’oblige enfin à nettoyer ton outil.

• 
  @mrsmith542310 күн бұрын

  Русский что ли?

• 
  @rjright737312 күн бұрын

  Hey, this is 5 years old but still applicable. I picked up one of these for $50 and altho i figured out how to disassemble it without breaking anything it was good to view the video, we can tell this isnt your first rodeo. My situation is a bit different altho my oil is poor condition and needs replacing my situation is No power when everything appears to be good including the armature, I have yet to take the cover off for the brushes, that's for later today. Im in no rush but I do need a way of testing the components in the handle, i have some experience with electronics and after testing continuity to wires and connection points can't find any issues, hence the reason im here. Great video still, thanks for posting this for people like me.

• 
  @IsrarAhmad-en3sn14 күн бұрын

  Can I apply lubricant if the moter is rusted

• 
  @enesyazc219015 күн бұрын

  Thank you

• 
  @mehdipanahian809618 күн бұрын

  ❤❤❤❤❤

• 
  @jamesstanford608822 күн бұрын

  Great job mate, thank you

• 
  @paulburfitt344323 күн бұрын

  Hi all, anyone know how much Turmopol oil this model takes please, as I cannot find that anywhere?

• 
  @sajmon710323 күн бұрын

  enough with this word okay always and a nuisance

• 
  @radimvorisek581026 күн бұрын

  super, thank you for this hint!

• 
  @jackdaniels5489Ай бұрын

  I have this angle grinder. I have plenty of problems with switch. Is broken all the time

• 
  @RubberRivetАй бұрын

  Here we have a guy demonstrating that he doesn't know where the hottest part of a flame is.

• 
  @user-dv7rg4qo1xАй бұрын

  тема на 1 минуту, развел мычания на полчаса

• 
  @420BertyАй бұрын

  This is not the same inside as my 2630. At 10:12 there is a ball bearing ring on top of that clip that I cannot remove

• 
  @god-xu3igАй бұрын

  useless instructional video.

• 
  @cosmopezzolla996Ай бұрын

  😂 I was thinking the same thing with the handle nut....Piece of shit 😂😂😂 thanks for the video. It's helping me fix my 905, it's old but it's one of the last things from my father's company so I'm trying to keep it alive! Reminds me of the good old days when dad was still alive! Thanks again

• 
  @FVBmoviesАй бұрын

  Thank you. The video helped to get further.

• 
  @mohammedmomin1471Ай бұрын

  What was the fault for not getting on bro?

• 
  @fredflintstone9702Ай бұрын

  Hi thanks for the video it helped me mend mine it's a bit different as mine has a small aluminium box plotted controller and yours had a coil of wire so I just connected the two thick ones together and bingo it works thanks thanks from England all's good :)

• 
  @juanmanuelmarquezaguilar3346Ай бұрын

  Macho no tienes ni idea

• 
  @Alex-er5wwАй бұрын

  In case you struggle to remove the part with stator, it is possible that while rotating, it melt the plastic in the stator which makes impossible to remove the rotor as done in the video What I've done : - There are 2 screws on the stator that you can remove if you are patient enough - Also you need to remove the 2 screws that attach the rotor Once both of this are done you can remove the rotor on the piece Hopefully it will help someone, I've tried for hours to remove this part...

• 
  @Alex-er5wwАй бұрын

  In case you struggle to remove the part with stator, it is possible that while rotating, it melt the plastic in the stator which makes impossible to remove the rotor as done in the video What I've done : - There are 2 screws on the stator that you can remove if you are patient enough - Also you need to remove the 2 screws that attach the rotor Once both of this are done you can remove the rotor on the piece Hopefully it will help someone, I've tried for hours to remove this part...

• 
  @savinocarretero2111Ай бұрын

  Great video helped me fix mine appreciate it brother

• 
  @nattaponchoomanee2930Ай бұрын

  Thanks to case study.

• 
  @pcgtrainers2570Ай бұрын

  Hi, good video. I have a 4 year old Bosch GWS 22-230 JH. It stopped working while cutting a metal pipe. how do you test the electronic circuit 1-607-233-317 in the switch to see if that is broken down?

• 
  @BenjaminKerr-yj4gsАй бұрын

  I wish these drills were still available to buy

• 
  @user-si1bd2xm7eАй бұрын

  День добрый, кто нибудь ремонтировал контроллер? Меня интересует какой стоит транзистор? У меня выгорел транзистор, надписи сгорели.

• 
  @liemphan4429Ай бұрын

  Cho xin cái ruột cũ

• 
  @Mosaic54Ай бұрын

  what a bullshit video, no solution, just a 10 min waste of time

• 
  @refathmothiur61092 ай бұрын

  Thank you for this useful video. Can you please tell where you got the parts from? I would like to buy. Thanks

• 
  @hasanalitonyali2 ай бұрын

  You had to heat it in 2 stages

• 
  @youth-thube1532 ай бұрын

  Hi all. I need help. My machine did no hammer blow. I replaced the parts you are showing and now I can hammer drill again but there seems to be another issue. When I drill a hole like 8mm into a beton wall then I‘m not able to get the beton drill off the wall because the overload clutch is on and makes this typical cracking noises. Is there an issue in the hammer pipe 1617000609, exactly on the balls 1903230010 which could be worn out?

• 
  @alouisschafer72122 ай бұрын

  Must have done a lot of work. Worn out brushes, worn bearings, gearbox very black and dry.

• 
  @maidi582 ай бұрын

  Belinya di mana bos?

• 
  @zimwasi2 ай бұрын

  Legendary, just found one at a garage sale. A complete lack of maintenance during its whole existence was it's problem ( all jammed up ). Thanks for this video!

• 
  @alexvalienteuceda12 ай бұрын

  Hola donde has comprado el kit con el transistor, me puedes dar el enlace? por favor

• 
  @JanDeruiter2 ай бұрын

  thank you! i jammed a small bit into the anvil and it would not come out. Wasn't sure how to disassemble the hammer case.

• 
  @10514dennisave2 ай бұрын

  My M18 Milwaukee Hammer drill just died. The light turns on and when I hit the button, it goes click. I use it extensively this frame blasting holes in the yard to plant things. It's worked for years. Any ideas? Let me know, please. WHO repairs these.

• 
  @mjatho2 ай бұрын

  Hi, did you find where this part went as I have same issue. Part is cheap but not sure where to locate new one

• 
  @raypesina77272 ай бұрын

  no sound

• 
  @harmongladding82023 ай бұрын

  Your solder melts instantly. Not mine. I try cleaning my solder gun and dipping the tip in flux.

• 
  @adhamnejimov63523 ай бұрын

  Сколка масла надевать ?

• 
  @mohamedchebbi5213 ай бұрын

  Probleme voyant allumer forme cleef merci

• 
  @mohamedchebbi5213 ай бұрын

  Hilti te 76 pe

• 
  @s2vue8193 ай бұрын

  where is the sound? no sound and you provided zero content

• 
  @mkimtiyazahmedahmed79093 ай бұрын

  Kahnatig rad

• 
  @MandlahArtwell3 ай бұрын

  My bit stack in and it broken on the lock

• 
  @UmeshKumar-yw2tk3 ай бұрын

  Give me mobail namber