Пікірлер

• 
  @ElCidPhysics903 күн бұрын

  Doesn’t appear that the Unifi Protect integration is available via HACS any longer

• 
  @tomasosvald3 күн бұрын

  I have just started with UNRAID , I don't know yoe if it is for me yet

• 
  @robcbr916 күн бұрын

  I’m trying to use Siri, with HomeKit but it says device isn’t certified some features are not available

• 
  @balloonpark10 күн бұрын

  This was working for me but randomly now some peers don't work. I deleted and recreated and they still don't work. I have two peers set up the same as remote tunneled access; one on phone and one for a travel router. The phone has full internet access with access to the network shares. The router only gives access to the internet.

• 
  @dirkfuellhase779315 күн бұрын

  Hallo, everyone, I have set everything up according to your instructions. My theme is also displayed. When I log out and log in again, everything goes back to standard. This doesn't just happen in the theme settings, but also in the dashboard. Does anyone have any idea why this is happening?

• 
  @wess739016 күн бұрын

  Thank you sir!

• 
  @josefreiterer372117 күн бұрын

  Thanks for your video! is the functionality still the same for the current versions? I'm asking because it's not running if I use your guide...

• 
  @01left24 күн бұрын

  Which IP Adress do i need to type in, the one from my server or my PCs?thx

• 
  @gabrielpadilla772426 күн бұрын

  how do I find out the ip address of the broadlink in the first place

• 
  @benalsopАй бұрын

  Is this video still relevant? I’ve just set up an Ubuntu server and I would love to know if I can still follow these instructions successfully or will any links/commands be outdated?

• 
  @Skysong84Ай бұрын

  This was EXTREMELY HELPFUL, thank you! You might want to mention that a hard-wired Ethernet connection is required - I was trying to set up on an old Windows tablet and ran into tons of issues before realizing what the problem was. Once I got an Ethernet to USB C adapter, things went pretty smoothly :)

• 
  @Capozzi3Ай бұрын

  Hello im new in this, do i have to install wireguard to secure my HA if im already using cloudflare?

• 
  @chesedАй бұрын

  I love the straight up no-nonsense, easy to follow instructions here. Lean and effective. Perfect. Thank you for this~

• 
  @gerrymoloney83392 ай бұрын

  Is it possible to have an audible sound during entry delay countdown?

• 
  @ajaffarali2 ай бұрын

  Thanks for this- your tutorials are really helpful. I am trying to get the snapshot to my Alexa device instead of a phone and almost everything works except the snapshot doesn't show up on Alexa. It is taking the screenshot and saving it on HA as I can see the screenshot but it's not sending them to my Alexa device. I get the message on Alexa but not the image. Maybe the folder structure has changed?

• 
  @BenFourie-gq6zj2 ай бұрын

  Thank you so much for this - it is excellent. Wondering how to automate shutting down and powering up a Chromebook.

• 
  @zy98672 ай бұрын

  Thank you so much, Juan!

• 
  @blitzio2 ай бұрын

  Thanks for the guide Juan. Question regarding what happens when you need to restart the Adguard container or maybe restart Unraid or do maintenance to the home server. I know it means Adguard will obviously not work, but is there a way to set up the router to have a backup DNS instead in that downtime before coming back again?

• 
  @TheOneMatt912 ай бұрын

  Any way to UNLOCK the PC?

• 
  @iansoper34532 ай бұрын

  The Home Assistant skill doesn't work in Canada. Is there any workaround?

• 
  @leshlie02 ай бұрын

  does this tutorial works behind CGNAT?

• 
  @JayMartinez2 ай бұрын

  I tried using a tag to send an announcement. When I type the announcement and hit save it forces me to rename it. When I do that and close HA and come back then DO part of the automation is now gone. Anyone know why?

• 
  @zero804732 ай бұрын

  Done this - No internet on dveice when connected to vpn - how do i fix this?

• 
  @redradoa2 ай бұрын

  Another great video. Very clear and to the point. Thank you!

• 
  @redradoa2 ай бұрын

  Dear Juan, a really useful tutorial. With all the concepts very well explained. I was completely lost with this integration and now it is clear. Thank you very much for your work.

• 
  @pH03N1xM3 ай бұрын

  Great video, thanks!

• 
  @CBbackberry3 ай бұрын

  set up according to your instructions. In unraid I can ping the iphone. But there is no internet connection on iphone. cannot connect to any website. all browsers on iphone just hang and do not connect. how to fix ?

• 
  @heleomopi3 ай бұрын

  thanks Juan !

• 
  @JayMartinez3 ай бұрын

  I cannot make my alarm sound repeat. I tried with both a google home and a HomePod.

• 
  @kwmaster3 ай бұрын

  Great Video - The only info being helpful would have been that for a list of commands you need to add a "-" as a prefix (as shown in your video - otherwise Home Assistant concatenates all entries into one command.

• 
  @warmapplepie87453 ай бұрын

  Thank you, so if my phone is in my local network and i have PIhole/Adguard set up, my phone has a adblocker that doesn´t drains my phones battery ? Sounds brilliant

• 
  @brandonhill93563 ай бұрын

  thanks for the quality information!

• 
  @marshallmann76204 ай бұрын

  Love you, Juan!

• 
  @lduberger4 ай бұрын

  Great tutorial! Now how can I have another container's traffic to go through that VPN tunnel?

• 
  @rdfogal4 ай бұрын

  Can you show how to trigger an action through UniFi Protect Facial Recognition?

• 
  @nezlok4 ай бұрын

  God tier content.

• 
  @striperseeker4 ай бұрын

  how do you do this on a phone? I do not see add-ons anywhere on my Google HOme App on my Samsung S23

• 
  @JMX2464 ай бұрын

  Thanks for posting - anyone ever found a ZwaveJS Card like the ZHACard to display entities and other information ?

• 
  @danninoash4 ай бұрын

  Thanks Juan for the great video, again! :) Did someone here managed to do the "backend-theme"? once I set in with the "Call service", I couldn't find the backend option...

• 
  @zheka_gal4 ай бұрын

  please tell me why when selecting rf and starting the service, the LED does not light up.

• 
  @Killadragon-rt1bq4 ай бұрын

  this needs an updated video. i already had this running before and then when i wanted to see how to get it to work through DNS so all devices just use it automatically, i ended up trying to delete the whole thing and start over and it wouldnt let me and now im reinstalling it and these things still look different and dont look the same in some places. im so confused.

• 
  @paulpereira40044 ай бұрын

  I'm curious, if I have a matter device added to Home Assistant, will it also be visible and controllable in google home if I scan the QR code? in other words can I view and control a matter device from both HA and Google Nest/Home interchangeably?

• 
  @siliconsoundz4 ай бұрын

  You did an excellent job of describing demonstrating. I am in the process of evaluating Unraid vs Truenas and you've really helped me get a grasp of Unraid. Cheers!

• 
  @skywalknotpossible5 ай бұрын

  Thanks for the video,helps, howerver I'm unable to learn it my RF remotes on 433.92Mhz frequency. No problem when using the Broadlink App, you can set the MHz, however in HA I can't. I've checked the Broadlink doco for HA and tried to get the data using python / cli but failed as those are fairly outdated. Any ideas on how to specify the frequency?? Any ideas? Or any alternative to RM4 Pro? (that itself works really well!) Thank you

• 
  @damienlesecq30265 ай бұрын

  Thank you so much! I was about to send the rm4 back because I was too dumb to make it work correctly. You saved my day!:

• 
  @krzysztofk42555 ай бұрын

  Thanks super helpful! How to increase disk capacity from 32 GB to 128 GB?

• 
  @Hjack73775 ай бұрын

  My picture doesnt show😢

• 
  @newearth335 ай бұрын

  Hey, do you know how to remotely switch on a computer from another computer or smartphone that isn't connected to the same WiFi? Is this possible? Thanks, Adam

• 
  @n3xu599885 ай бұрын

  Do I need to configure DNS settings in my router?

• 
  @ja43065 ай бұрын

  I was finally able to get my NFC tags to run something without having to tap a notification in iOS today thanks to this video. One thing I have a question about, does it matter which NFC tags you buy really? I notice the ones I have sometimes take several seconds to actually register that I scanned them to run the automation. Not sure if it's the tags themselves or whether that's "just the way it is".