Пікірлер

• 
  @gilbertomoran7420Күн бұрын

  What up Ali , nice informative video . What chip reader is that , and where did you purchase ? Also i like that blue mat where did you find that ? Keep it up brother !

• 
  @DallasAutoDiag7 сағат бұрын

  Hey. I bought both from uhs hardware

• 
  @dmitriyyurchenko3047Күн бұрын

  Changed the black piece you was testing but it drives better but got code p0046. Abs on autel popping up

• 
  @marshamckenzie3157Күн бұрын

  Hi it’s July 22 I think do you happen to be coming to Austin? I could use your help 😢

• 
  @DallasAutoDiag7 сағат бұрын

  sorry I dont go there

• 
  @rudygarcia84362 күн бұрын

  Ambient air temperature sensor, change the sensor in front the radiator

• 
  @DallasAutoDiag7 сағат бұрын

  i did. watch the 2nd part

• 
  @scorcher6172 күн бұрын

  Nice work sticking with it, the other two probably do it two with different pin out or magic trick someone else tripped on. Like the comparison videos you did nice job even if you were a little biased lol

• 
  @DallasAutoDiag2 күн бұрын

  lol how?

• 
  @scorcher6172 күн бұрын

  @@DallasAutoDiag I was joking with you you were pushing hard for the CG pro to do it that’s all, yoyo did a video about CG vs new VVDI multi-prog and said the multi would replace 3 of the CG products to me a I don’t care what I use as long as it can do job it doesn’t have to best or fastest just get it done. They can’t all do everything that’s why you need more than one.

• 
  @DallasAutoDiag7 сағат бұрын

  there are 2 reasons why I really believed it would, first if I go by logic and compare it to the vvdi it should read it. second because the tool was recommended to me by a good trusted friend who alreay used it enought to give a good impression about it.

• 
  @scorcher6176 сағат бұрын

  @@DallasAutoDiag Your first video you said a friend did it so I knew you would figure it out , think it was a plus that it didn’t work first time we all learned a little more from the failed attempts. But on xp400 there was an unlock choice you didn’t try was there a reason I don’t have the xp so I was wondering if someone tried that. The xp400 connected to pc might have more options who knows maybe someone will chime it say they did it with other two and how then we will have backup methods, good luck on future videos

• 
  @DallasAutoDiag6 сағат бұрын

  @@scorcher617 I still have a donor bcm. Maybe one day if I have time I will try it with the xp400. Never noticed the unlock option there.

• 
  @nickayivor84322 күн бұрын

  Can't wait for the next video 👍 WHIP SMART,Dallas Auto Diag Take care From Nick Ayivor from London England UK 🇬🇧 ⏰️ 22:40PM Good Evening

• 
  @DallasAutoDiag2 күн бұрын

  Thanks for watching!

• 
  @rrmech112 күн бұрын

  Nice job

• 
  @DallasAutoDiag2 күн бұрын

  Thanks!

• 
  @maintenanceman10152 күн бұрын

  It's only temporary unless it works.

• 
  @DallasAutoDiag7 сағат бұрын

  yup

• 
  @SS-U233 күн бұрын

  Thank you for the valuable information that was provided on this video.

• 
  @DallasAutoDiag3 күн бұрын

  Thank you

• 
  @mostimperial3 күн бұрын

  Since the time you’ve replaced it have you had any issues with it

• 
  @DallasAutoDiag3 күн бұрын

  Zero issues

• 
  @iliyakrustev12415 күн бұрын

  Hello very nice video! I live in Bulgaria, Europe and i tried to flash my tcm on my GMC Sierra 2014. I purchased a subscription SPS for 2 hours and was 18 euros. When i download the software it downloaded me TLCSuite 2, which i think is not the installation file and when i tried to launch techline connect from the browser it gives me error UEH101: null. I waste my money. Please help me and thanks in advance!

• 
  @DallasAutoDiag3 күн бұрын

  Hi, I will not be able to help you because the process here is different than over at your country. Your best thing to do is to call customer support and ask their halp

• 
  @scorcher6175 күн бұрын

  Good video series if you try the VVDI again dropping voltage might help read it just turn it back up to write. 3.6v or 3.2v might be right. The multi-prog looks like a deal

• 
  @DallasAutoDiag3 күн бұрын

  Actually there is another video coming out that I was successful of reading and writing

• 
  @edforthewin85745 күн бұрын

  So did it turn out to be a bad instrument cluster?

• 
  @DallasAutoDiag4 күн бұрын

  Yes

• 
  @edforthewin85744 күн бұрын

  @@DallasAutoDiag thank you! So I checked my after market radio and it’s pulling a lot of amps as well as my cluster but I still have -.164amps drawn. What do you think it could be? Sorry for asking so many questions

• 
  @thomaseakle59965 күн бұрын

  So mine is throwing the P1101 code I think not positive. But it has to do with the emission system. Could that be the throttle body as well? Cleaned the MAF sensor and checked all the tubing but it’s not throwing any other codes?! HELP! lol

• 
  @marcopon21855 күн бұрын

  I have a 2013 , the codes I have are bank 1 sensor 1 , replaced that then I got “running too rich” , with this it checks the engine light on and it drives rough , it stutters from stop and gos at points it stalls out completely, throttle response is also very bad, but as soon as I clear the code everything runs fine , now it won’t stay on unless my foot is on the throttle , but again if I clear the code it’ll run perfectly fine

• 
  @oldspice-lario5 күн бұрын

  As a technician I can say this sensors is a electronical and operated only by computer inside. MOST important thing to do after replacement to do a Zero calibration Point and make it zero before calibration. Warning if u don't do it and u overturned a steering in hope it will calibrate by itself - wrong! the sensor will be white down a code in the EPROM (u can't clean it) - steering angle sensor internal faulty. To reanimate this Angle sensor u have to Reprogram the EPROM

• 
  @DallasAutoDiag7 сағат бұрын

  im starting to learn how to do so. thanks for the tip

• 
  @ocbrownsr5 күн бұрын

  Nice video literally took 15 minutes once I saw your video.

• 
  @DallasAutoDiag7 сағат бұрын

  Glad I could help

• 
  @hermandouglas7686 күн бұрын

  My equinox wont start please help me please

• 
  @DallasAutoDiag7 сағат бұрын

  are you in Dallas?

• 
  @victornaja79276 күн бұрын

  hi what model autel are you using.

• 
  @DallasAutoDiag7 сағат бұрын

  MS919

• 
  @jackmorrison58756 күн бұрын

  This is probably why it binds when I turn sharp

• 
  @DallasAutoDiag6 күн бұрын

  Yes one of the reasons

• 
  @stonefacedninja6 күн бұрын

  This issue's been around for a while. Have a 2011 Altima, same problem. Went to the dealer, they said the MAF was bad, replaced it and reprogrammed the ECM. Light came back of around 40K miles later. I cleaned the throttle body and the light went off. I think the throttle body's are supposed to have regular maintenance. The code comes back after about a year or so, 15-20 miles but cleaning the throttle body gets rid of it.

• 
  @DallasAutoDiag7 сағат бұрын

  yes and most probably a pcm update it a must

• 
  @guitechnickal7 күн бұрын

  Any idea why my '14 Escape died while I was in park with the engine running, then when I insert the key it tells me no key detected? Looking through all manner of things

• 
  @DallasAutoDiag7 сағат бұрын

  did you watch the whole video?

• 
  @santosbramasco83937 күн бұрын

  whishone is it the rele of gas pump?

• 
  @santosbramasco83937 күн бұрын

  cual es el rele de la bomba del gasolina?

• 
  @mks-19827 күн бұрын

  عاشت ايدك

• 
  @ayazbhatti29908 күн бұрын

  Hi sir I have gmc 2019. Same this code coming p129F. Sir replace fuel pump but problem sme some time vehicle stert some time not strt what I do sir plz ans me

• 
  @r-rickofficial8 күн бұрын

  great information very informative

• 
  @ROLYTC8 күн бұрын

  Great video, thanks. i have the same issue with my Lexus. Im going to try everything you did and see if that fixes my problem. Thanks again

• 
  @dc2b20vtec9 күн бұрын

  Ahh the infamous wastegate rattle is a pretty good indication of a possible turbo gone or going bad

• 
  @DallasAutoDiag9 күн бұрын

  Yes

• 
  @kaylastillman20789 күн бұрын

  2017 nissan versa sedan, ac kicking in and out(blowing cold to hot) do you believe it to be the relay?

• 
  @DallasAutoDiag9 күн бұрын

  Not the relay. Maybe low in freon

• 
  @justinwilliams700810 күн бұрын

  Going thru the same thing did rear main seal now I’m getting p0787 not showing on the dash like yours is swapped the solenoid out and nothin happened have went through the whole harness and have seen nothing either so I’m gonna put the tcm in since it’s cheap and if that don’t work I’m parting it out

• 
  @DallasAutoDiag9 күн бұрын

  Remember to program it

• 
  @justinwilliams70089 күн бұрын

  @@DallasAutoDiag I am I have a guy from my local dealer with a tech 2 coming to me today if this don’t work idk what else will🤦🏽‍♂️

• 
  @aj233ed10 күн бұрын

  dont buy Hyundais they are garbage

• 
  @DallasAutoDiag10 күн бұрын

  Agree

• 
  @kwangnam469412 күн бұрын

  Are you located in Dallas? My Sienna is having the exact problem. Would you be able to calibrate it for us?

• 
  @DallasAutoDiag12 күн бұрын

  Yes our shop is in Kennedale TX. look us up on google and contact us to arrange an apointment

• 
  @marjag72able12 күн бұрын

  Hello. I bought yesterday a Rx400h. Both batterys are empty. I gonna buy a new battery tomorrow. Can i somehow Start the engine only with the second battery and just with gas? Is it possible to load the Main HV Battery somehow?

• 
  @DallasAutoDiag12 күн бұрын

  I believe using a csan tool you can activate the gas engine to charge the hybrid battery

• 
  @marjag72able12 күн бұрын

  Hello. I bought yesterday a Rx400h. Both batterys are empty. I gonna buy a new battery tomorrow. Can i somehow Start the engine only with the second battery and just with gas? Is it possible to load the Main HV Battery somehow?

• 
  @DallasAutoDiag12 күн бұрын

  I believe using a csan tool you can activate the gas engine to charge the hybrid battery

• 
  @DavidHernandez-wz7ds13 күн бұрын

  Question man I have the same issue but it give me code po299 turbo boost would this work for that ?

• 
  @DallasAutoDiag12 күн бұрын

  not sure. could be many things

• 
  @GerardoLimon13 күн бұрын

  2016 Malibu LT 1.5 here. Engine power reduced was shown and then the brakes failed as the engine went into a stop. There’s an apparent oil leak as when I checked my oil there was hardly any in there despite having an oil change a month and a half earlier running on usually highway miles. I am currently replacing the oil pressure sensors but I’m also seeing the accelerator pedal needs replacing historically with this model? Also I’m seeing that if there’s oil present in the clamp that keeps the pcv valve cover in place then this part historically needs replacing too on this model? That might be my second and third option if this sensor replacement does not work. Will update this comment if y’all are interested.

• 
  @DallasAutoDiag13 күн бұрын

  Yes sir please keep us updated. Also everything you mentioned is correct. I have another video on this channel that deals with the low oil issue. That was a hand made though. Still a cause of that reduced engine power.

• 
  @ezekielbernades5114 күн бұрын

  What does it mean if my car is shutting off when I stop? The battery symbol will pop up after like it died on me (while idling at a light)

• 
  @DallasAutoDiag12 күн бұрын

  not sure, needs furthur diag

• 
  @gusgavia382714 күн бұрын

  That happened to my 2020 honda civic SI I just pushed the start button 3 times without pressing the brake pedal or the cluth pedal and that fixed the problem.

• 
  @DallasAutoDiag12 күн бұрын

  I dont think a fan has anything to do with the brake pedal. I dont think you watched the whole video. this is a part 1 of 3 video series

• 
  @AceAutoServices14 күн бұрын

  Hello brother I have same issue with my sienna where you located and how can I get in touch with you thank you

• 
  @DallasAutoDiag12 күн бұрын

  hi, contact us on facebook. same name as the channel. dallas auto diag

• 
  @estebanvelasquez7816 күн бұрын

  Do you have a Facebook or Instagram?

• 
  @DallasAutoDiag12 күн бұрын

  yes dallasautodiag on facebook or whatsapp

• 
  @AaronEbrahim16 күн бұрын

  Bro, thank you so much for your video(s) here about this.

• 
  @DallasAutoDiag12 күн бұрын

  My pleasure!

• 
  @vincewright743817 күн бұрын

  5:10 you are the reason honest mechanics still have rep 💪🏾 you are appreciated

• 
  @DallasAutoDiag16 күн бұрын

  Thanks

• 
  @lovkarantoor_17 күн бұрын

  I have an audi q7, i changed my front tires and have all these lights pop up. It locked my steering and i can’t drive, what should i do at this point ?

• 
  @DallasAutoDiag16 күн бұрын

  Gotta scan it to see what could cause it.

• 
  @MarzNet25617 күн бұрын

  Thanks. I'm gonna pick up some of those mini fuse circuit breakers.

• 
  @DallasAutoDiag17 күн бұрын

  They are very useful

• 
  @kylewilhelm939718 күн бұрын

  Real tech 2 or clone?

• 
  @DallasAutoDiag18 күн бұрын

  real one

• 
  @pacecarentertainment622819 күн бұрын

  I had a u1267 p057d… this was it! Thanks

• 
  @DallasAutoDiag18 күн бұрын

  No problem

• 
  @nickayivor843219 күн бұрын

  Happy 4th of July, Dallas Auto Diag Can't wait for the next video My teacher 👍 WHIP SMART ,Dallas Auto Diag From Nick Ayivor from London England UK 🇬🇧 ⏰️ 23:25PM Good Evening

• 
  @DallasAutoDiag19 күн бұрын

  Thanks! You too!

• 
  @rrmech1119 күн бұрын

  Nice job

• 
  @DallasAutoDiag19 күн бұрын

  thanks

• 
  @philh923819 күн бұрын

  Where you get your dinosaur it’s 2000 laptop from?

• 
  @DallasAutoDiag19 күн бұрын

  lol I got it from ebay