Пікірлер

• 
  @anthonysiegel468511 сағат бұрын

  Good video . Helps me ,as I'm upgrading mine soon

• 
  @TePasasALV2 күн бұрын

  Did you change the hose , i might need to change my hose caise im still leaking between my transmission and engine block

• 
  @daboy525617 күн бұрын

  Hey my pin broke and I can’t get it out what do I do

• 
  @DirtydogMech17 күн бұрын

  It broke inside the caliper bracket? If it broke inside and it's accessible, heat it up with a torch. Use pliers to twist and pull while you heat it up and spray lubricant on it. If nothing works need a whole caliper and bracket

• 
  @alanv252725 күн бұрын

  Thank you for the knowledge

• 
  @TH-wq9fuАй бұрын

  Just became an independent woman- and you helped me change my own lightbulb! Thank you!

• 
  @DirtydogMechАй бұрын

  Awesome I'm glad I could be of some help

• 
  @BIsForBudgetАй бұрын

  What did you end up doing? I'm in the same situation. (I'm sure alot of us are.)

• 
  @DirtydogMechАй бұрын

  I ended buying a couple of wrenches to complete some sets. Sold some, traded some. Modified some lol.

• 
  @BIsForBudgetАй бұрын

  @@DirtydogMech Yeah, I guess there is no perfect answer. I sold all of my non-US wrenches and sockets as a bundle for cheap. The remaining items are great quality, but are not a compete set. Thanks!

• 
  @DirtydogMechАй бұрын

  @BIsForBudget yeah as a low key tool hoarder I'd rather keep them than throw them out. I wanted to try and make some sculptures but I've never had real time and do not own a welder

• 
  @dcf3601Ай бұрын

  I did and took it to my vehicle and was able to remove a lug not and tighten it back so the mall battery is 👍

• 
  @DirtydogMechАй бұрын

  Ahhh yes. Not the best batteries. Glad you checked it before

• 
  @dcf3601Ай бұрын

  Yup i got mine from pepboys, barely used but i just grabbed it out of the shed, charging it up and plan to put it in my vehicles trunk

• 
  @DirtydogMechАй бұрын

  Make you check to see if that battery holds a charge. Mine died

• 
  @adrien.c8731Ай бұрын

  Hello, is it bad if I didnt put grease on the Little métal part avec the calipers ? Thanks

• 
  @DirtydogMechАй бұрын

  It isn't bad. But it is recommended to keep consistency in brake feel and performance

• 
  @DefGef772Ай бұрын

  Gonna try this on my 2008 Focus, bought the heavy polishers before and couldn’t manage it so this may be the next best thing for a beginner.

• 
  @Kyle-jd3wm2 ай бұрын

  Dude, your camera angle sucks.

• 
  @nickfields402 ай бұрын

  where do you get the code??

• 
  @emersonrae9052 ай бұрын

  Bless!

• 
  @jesusiswithme247clr2 ай бұрын

  I did that and it came back on as error e 😢

• 
  @teslamr73333 ай бұрын

  What part of NY are you located in?

• 
  @DirtydogMech3 ай бұрын

  Long Island

• 
  @teslamr73333 ай бұрын

  @@DirtydogMech If you aren’t too far out from Brooklyn and do work on the side I might need your assistance for a 04 Civic to change a bad wheel bearing.

• 
  @jamiegaskins36873 ай бұрын

  I got the code straight from Honda and it doesn’t work. Disconnected everything, tried the code again, nothing. All the time I’ve wasted I could’ve just installed an aftermarket one by now.

• 
  @aps55243 ай бұрын

  What if you use this method but you have air in the lines, will I have to pump the brake pedal after I empty the oil or the opposite, thanks

• 
  @aps55243 ай бұрын

  What if you use this method but you have air in the lines, will I have to pump the brake pedal after I empty the oil or the opposite, thanks

• 
  @DirtydogMech3 ай бұрын

  It difficult to know if you have air in the lines for sure or not unless you did some recent brake work. But if you suspect you have in the a line or caliper, you can stick a long pry bar, chisel, screw driver between the brake pedal and the driver seat to depress the brake pedal. Then go to the 1st brake bleeder screw, cracked open, then quickly close once the fluid slows down and repeat. You couldn't also gravity bleed which means filling up the reservoir with fluid then crack all the bleeder screw and let some fluid dribble out as long as you do not step on the brake pedal

• 
  @DirtydogMech3 ай бұрын

  Emptying brake fluid out the reservoir will not take air out of the brake lines

• 
  @gijoe20073 ай бұрын

  Great job. But I got really dizzy from the video jerking around. Moving too fast.

• 
  @DirtydogMech3 ай бұрын

  I know i apologize. I film it on a old cellphone camera that didn't have image stabilization

• 
  @jessiesintuition35173 ай бұрын

  Thank you

• 
  @unicorn54523 ай бұрын

  Omg i was just there with a volcano view on the 2nd fl in Americana however next time im asking for a higher floor lol 😂😂😂❤ this view is insane ❤and at night beautiful

• 
  @DirtydogMech3 ай бұрын

  Yes it definitely is worth it. The night views is relaxing hearing the water. And then in the morning opening up yours curtain to that view. Almost feels like your really on a tropical island

• 
  @lorisoliven24753 ай бұрын

  That didn’t work for me but what did work was touching the ! Button but at least you got me to the area I needed to be in thank you ❤

• 
  @kashdean49683 ай бұрын

  hey just curious is this the same if it just says errr nothing else all mine does is power on none of the buttons work

• 
  @DirtydogMech3 ай бұрын

  No numbers? Try disconnecting and reconnecting your battery. Then press your code

• 
  @mariolopez5663 ай бұрын

  Very helpful till dis day

• 
  @coolgame1213 ай бұрын

  Worked! Thanks man

• 
  @olivi33393 ай бұрын

  Well i see i need a short extention.

• 
  @joseandresgomez77253 ай бұрын

  Sabes cómo poner la Pilot 2011 en modo aprendizaje para los tpms?

• 
  @DirtydogMech3 ай бұрын

  Perdon pero no se. Depronto va nesesita una computadara

• 
  @joseandresgomez77253 ай бұрын

  Ok , gracias, si tengo el scaner solo que no logra sincronizar los tpms. Me dice cancelado.

• 
  @Realworkingpeople3 ай бұрын

  The car should be level this car looks a lot higher in the front

• 
  @ItsKatieB4 ай бұрын

  Thank you! Super helpful ❤

• 
  @DirtydogMech4 ай бұрын

  Im glad it helped

• 
  @YN077184 ай бұрын

  Got it but it’s comical how it when the radio does turn on it straight to a Japanese station , did it to me too

• 
  @DirtydogMech4 ай бұрын

  I know right. I actually think its Korean or Chinese

• 
  @Yawnz_Vlogz_4 ай бұрын

  Hey bro still helping people to this day on my way to go repair this for a client much appreciated I hope your doing good man !

• 
  @DirtydogMech4 ай бұрын

  Whattttt im glad this helped. Im even more more happy that these classic civic are still on the road. These will always be my favorite

• 
  @Yawnz_Vlogz_4 ай бұрын

  @@DirtydogMech man tell me about it the one I’m working on is a 97 !!! I have a 2019 civic man it feels so fragile compared to how they were built before 😂

• 
  @DirtydogMech4 ай бұрын

  @@Yawnz_Vlogz_ Yeah back when things were simple . Less computers and less things to potentially to break

• 
  @jerzuz74634 ай бұрын

  What is 1 6th??????

• 
  @DirtydogMech4 ай бұрын

  Must be my Lisp 😂

• 
  @user-eh7qx9zf3c4 ай бұрын

  All is great, but if the trunk doesn't open when you use the key, then what?

• 
  @unforgiven101inc4 ай бұрын

  can I ask why didn't you take the tires off to do the job

• 
  @DirtydogMech4 ай бұрын

  I was short on time. Yes maybe i should have

• 
  @danlaur79734 ай бұрын

  Take the wheel off for better access

• 
  @bossworldsvideos5 ай бұрын

  iknow this video its 7 years old but thanks for the help what a 2.99 part of a diffrent it made

• 
  @DirtydogMech5 ай бұрын

  Awesome im glad it helped you out

• 
  @travisweese29925 ай бұрын

  You can bleed your breaks by yourself with just a water bottle, clear rubber hosing that will fit over the bleeder screw, and some break fluid

• 
  @johnchesworth94695 ай бұрын

  Thanks mate ❤

• 
  @boatman28015 ай бұрын

  Great video!

• 
  @shappirefishing11865 ай бұрын

  Thanks

• 
  @retrogamerdave3625 ай бұрын

  I gotta do the diff fluid and check the nuts as well

• 
  @DirtydogMech6 ай бұрын

  0:55 there is a button behind this up & down pad that you need to hold down on the Pilot Touring edition

• 
  @produceryia20056 ай бұрын

  When you mention you say you’re gonna hold it down you don’t tell me what you’re holding down?

• 
  @COWBOYTJSTEVENS6 ай бұрын

  I heard about a guy in Florida who died because he didn’t know about the lever I the floor

• 
  @DirtydogMech6 ай бұрын

  Yes I heard about that as well. I've been asked many time what happens if the power goes out

• 
  @user-eh7qx9zf3c4 ай бұрын

  I heard that you can take out the taillight and run power thru the pigtail on the positive side from another battery to make the fob open the door.

• 
  @flyspo6 ай бұрын

  Great video, you really made it easy.

• 
  @silverrunner86876 ай бұрын

  I do this method every 6 months +\- in between 2 year gravity bleeds. Try to keep it as clean and fresh as possible.

• 
  @DirtydogMech6 ай бұрын

  Exactly 💯

• 
  @manuelito6616 ай бұрын

  👎👎👎👎👎👎👎

• 
  @DirtydogMech6 ай бұрын

  ???????

• 
  @JeffLcarz7 ай бұрын

  My man your video was awesome quick to the point. Got the serial number called up the Honda dealership and he gave me my code for free 👍

• 
  @adventureswithedna7 ай бұрын

  What are you using for microphones

• 
  @DirtydogMech7 ай бұрын

  Honestly, it's just my phone. I know im being hypocritical, but that's why Im rarely more than arms length away from my phone because I know it will get distorted and difficult to hear 😅. I believe your content is way better than mine. That is why I believe you'd benefit way more than me

• 
  @adventureswithedna7 ай бұрын

  @DirtydogMech if I use my phones mic I feel like I have to up the volume in editing. The mics I use give me better voice sound but background noise is usually weird or non existent

• 
  @DirtydogMech7 ай бұрын

  @adventureswithedna oh ok I understand. Yeah if I do a car repair video I try and stay as close as I can to my phone. 1. To not sound far away and 2 quality stays ok. I have airplanes and a busy road of traffic where I film. Eventually I'd like to do get s real mic

• 
  @adventureswithedna7 ай бұрын

  @@DirtydogMech we just finished filming our next adventure. Chance forgot to turn on his microphone 😆🤦‍♂️

• 
  @DirtydogMech7 ай бұрын

  @adventureswithedna oh jeez lmao 🤣 😂. Hey at least his willing to learn a dying trade of the automotive maintenance and repair

• 
  @jarde19897 ай бұрын

  - Hold the button (continue to hold) - Insert car key - Turn car on - Release button when light stops blinking

• 
  @DirtydogMech7 ай бұрын

  Perfecto