Пікірлер

• 
  @ardaa03092 күн бұрын

  Hello I did my repair but I have a question in mind. Does it fit perfectly on the plastic legs in the glass regulator or it only holds my 3 screws. I made the adjustment well, but only the plastic coating in the 3 screw regulator that holds my glass does not touch the feet. What should be

• 
  @MarcoCerqueira2 күн бұрын

  Sorry, I don’t think I really understand your question. However, if you’re talking about the three screws that hold the metal regulator in place those should be tight. If you’re talking about the screws that hold the actual glass in place those do not need to be super tight, but there should not be any slack. If I remember correctly, I believe those plastic washers go in front and behind the glass so that there’s no actual metal touching the glass. Everything should go back the way it was before you remove it. Hope this helps. Good luck.

• 
  @samuelchima2476 күн бұрын

  Thank you for sharing

• 
  @robertbeltowski28197 күн бұрын

  Hi, So did you ever get your window washer system working. I was hoping to see you locate the tubing under the dash. My tubing is clogged and blowing air does not free it.

• 
  @nicholasreif34439 күн бұрын

  What is the appropriate length for the chain?

• 
  @MarcoCerqueira8 күн бұрын

  From bracket to bracket, it’s about 13.75”, but this the chain itself vary depending on the carabiners you use at the ends. Good luck

• 
  @nicholasreif344321 күн бұрын

  I had a hard time getting the shock in. Any tips tricks?

• 
  @MarcoCerqueira8 күн бұрын

  Jack up the rear axle until you get the bolts to fit through the eyelet on the shock.

• 
  @subbab428 күн бұрын

  I wanted to watch to see how you bleed the brakes by yourself...lol

• 
  @MarcoCerqueira22 күн бұрын

  I just used the gravity method. Filled up the reservoir and just let it pour out the bleed nipple on the caliper. This doesn’t always work perfectly but in this case it worked fine.

• 
  @djmekavenum2707Ай бұрын

  Greetings, this oil is the same and goes directly to the transmission.

• 
  @geoffreycarter3981Ай бұрын

  I love that you have this car and are sharing it. I have not explored your channel yet, but I hope you get it up and running and in good form again! I'm glad you held onto it while you made sacrifices for your family etc.

• 
  @MarcoCerqueiraАй бұрын

  Thank buddy. Biturbo content gets no views but I’m doing it because I love this car.

• 
  @CC-jy6qfАй бұрын

  What year & model civic /del sol for the brake rotors and front calipers

• 
  @MarcoCerqueiraАй бұрын

  Base EG Civic. I believe 91-95

• 
  @PalmsterАй бұрын

  So wait that 3d print you have in your description for the cup holders is all we need but we need to drill in the holes?

• 
  @MarcoCerqueiraАй бұрын

  I didn’t add mounting holes because they might be different for an Acty with air-conditioning versus an active without air conditioning. This way you can drill the holes accordingly.

• 
  @PalmsterАй бұрын

  @@MarcoCerqueira ok gotcha, is it possible to just put 3M tape at the bottom of it and call it? Lol

• 
  @Melkor54Ай бұрын

  what ecu are you running in the biturbo?, i am doing an efi conversion on my 1985

• 
  @MarcoCerqueiraАй бұрын

  Haltech Elite

• 
  @egemenaydin9195Ай бұрын

  If you’re installing your own stereo this is the video to reference from.

• 
  @musclegtoАй бұрын

  Awesome

• 
  @tomweslowski41162 ай бұрын

  What was the compressed length and extended length of the factory shocks? I have googled the hell out of that question and cannot get the answer. I even put in the stock part number looking for specs. Thank you in advance

• 
  @MarcoCerqueira8 күн бұрын

  Not sure…sorry this was done so long ago. I know the replacement strut matched

• 
  @sargent9282 ай бұрын

  How can I know what kind of chassis I got ...my car is a 2011 e550. Is it W212 or W218 because some body is selling the calipers from 12-18 e550 CL550 W218....PLEASE LET ME KNOW IF THEY WOULD FIT MY 2011 E550.....THANK YOU SO MUCH

• 
  @MarcoCerqueira2 ай бұрын

  Email me, I will see if I can help: [email protected]

• 
  @sargent9282 ай бұрын

  Is W218 THE SAME AS W212 WHAT IS THE DIFFERENCE. ...PLEASE LET ME KNOW. ...THANKS

• 
  @MarcoCerqueira2 ай бұрын

  A W218 is a CLS, not an E-class. Although they are based on the same chassis with a different body.

• 
  @sargent9282 ай бұрын

  I own a 2011 e550 and want to upgrade like you did in yours....please let me know if this could fit my application THE CALIPERS I FOUND from a 12-18 mercedez CL550 W218 PLEASE LET ME KNOW IF THEY FIT MY 2011 E550. THANK YOU SO MUCH

• 
  @MarcoCerqueira2 ай бұрын

  Possibly…is your car 4-Matic? If so you have to make sure you are using calipers from a 4-Matic car.

• 
  @Nanashi_MYOB2 ай бұрын

  Nice vid! The only recommendation I would have made would have been to scrub the battery box and tray with a baking soda solution before painting or etching. Just to neutralize residual acid accumulation so as not to compromise paint integrity.

• 
  @MarcoCerqueira2 ай бұрын

  I didn’t know about that…thanks for sharing.

• 
  @Nanashi_MYOB2 ай бұрын

  @MarcoCerqueira No problem, I learned about it when I was doing a restoration on a 63 Nova that had sat for years. The winter temps cracked the battery and let it drain out all over the passenger side engine compartment. A "body tech" repainted the affected area, and it turned out just as bad a year later. All the paint pealed, and the surface rust had spread further. After asking a buddy who did high-end restoration, he asked if anyone neutralized the spilled acid as just washing won't get rid of residue. He recommended baking soda. Sure enough, over 15 years later, no issues! Hopefully, my irksome and dollar wasting mistake helps save someone some coin and headache.

• 
  @shark700070002 ай бұрын

  I did this on my wifes convertible. Huge job, this is. It's always the same plastic piece that brakes. I'm surprised an aftermarket company hasn't designed a metal on to replace it, so it never brakes again, like the vacuum actuator lever on the intake manifold. Only one window quit working, but I ordered the kit with both repair parts for both sides. It's a good thing, because the other one was broken too. It just didn't bind like the other one. It broke in a slightly different section. Good video. I just got me the same car I got my wife, and now one side is grnding when it goes up. The guy I bought it from said he had it in the shop to repair one of the windows. It seems they only fixed the one and didn't bother with the other one. What? You're not supposed to have extra parts when you're done? I thought that was supposed to be a sign of a good mechanic that can get the job done with less parts. LOL

• 
  @MarcoCerqueiraАй бұрын

  Thanks for watching

• 
  @TurboTurdBurglar2 ай бұрын

  Miata struts work. You have to cut the lower ear off

• 
  @MarcoCerqueira2 ай бұрын

  What year Miata? Definitely want to try

• 
  @TRYHARDMG2 ай бұрын

  Where did you purchase your lift kit?

• 
  @MarcoCerqueira2 ай бұрын

  The lift kit was custom made but I copied a general design that I saw for sale.

• 
  @fletchers1912 ай бұрын

  Does anyone have the part number for these seem to struggle getting them in the uk

• 
  @stopactionsam2 ай бұрын

  I am confused. Did you fix it with the $28 part or with the second one you bought?

• 
  @MarcoCerqueira2 ай бұрын

  Valid question. I believe that the $28 part that I got was faulty even though it was new in the box. The second one I bought was fine.

• 
  @ZUKME2 ай бұрын

  very cool project! just found your channel and getting ready to import my carry. i think it would be cool to follow your camo pattern :)

• 
  @MarcoCerqueira2 ай бұрын

  Cool, thanks!

• 
  @David-cd2ye2 ай бұрын

  I noticed you have bilstein shocks on the truck, can you tell me what model bilstein shocks did you use ?

• 
  @MarcoCerqueira2 ай бұрын

  Yes, here you go: kzread.info/dash/bejne/Y2uAvNJvp7TLdtI.htmlsi=A54a1p1y4brR2fgU

• 
  @mathewantao9992 ай бұрын

  Love the grill!!!

• 
  @girthbrooks8303 ай бұрын

  Did you make or buy your flares?

• 
  @MarcoCerqueira2 ай бұрын

  I made them…here you go: kzread.info/dash/bejne/qJ5q19Org8-bmJs.htmlsi=79-5HccXrFI-PTqD

• 
  @girthbrooks8303 ай бұрын

  Dude!!! I love it!!! Thank you for the STL files!!

• 
  @MarcoCerqueira2 ай бұрын

  Glad you like them!

• 
  @jacksonjack13003 ай бұрын

  Thanks for the video but its not necessary to remove the seats

• 
  @GM-zn2mz3 ай бұрын

  Nice job

• 
  @MarcoCerqueira3 ай бұрын

  Thank you! Cheers!

• 
  @doug_chester3 ай бұрын

  Great video. May I ask where you go the seat covers from?

• 
  @MarcoCerqueira3 ай бұрын

  Thanks for watching. I had them re-upholstered. Below is the link for the video with more detail. kzread.info/dash/bejne/ooyqt7CviNawgMY.htmlsi=B9kKC3Nl6TzlSggA

• 
  @Dadwithallthecool3 ай бұрын

  Are your “ struts”( shocks?) holding the axle from fully extending ? They will fail I think, longer shocks may be a good idea…also just cut off those bolts and chase the threads with a die… I have watched all your Acty videos and am surprised those 2 simple things got by you. Thanks for all the info on the Acty. I am currently on the search for an Attack in nice shape to run around the Wyoming Black Hills….too old for a side by side

• 
  @MarcoCerqueira3 ай бұрын

  My rear shocks were actually completely dead. I upgraded to Bilstein universal shocks with some minor modifications. There are more details in the video link below: kzread.info/dash/bejne/Y2uAvNJvp7TLdtI.htmlsi=TIOtdErwSa9lizt2

• 
  @alexidominguez99973 ай бұрын

  Muy bonita la combinación de colores azul y negro de tu auto. Pero escucho un ruido como si viniera del power Stering.

• 
  @jkraich53173 ай бұрын

  I wonder how that flocking material is holding up

• 
  @MarcoCerqueira3 ай бұрын

  Perfectly. They sell rayon based and nylon based. nylon is rated for outdoor use. That’s what I used and it’s pretty tough stuff

• 
  @Carlos-fr6ex3 ай бұрын

  excellent video, thank you!

• 
  @MarcoCerqueira3 ай бұрын

  Glad it was helpful!

• 
  @crazyyakuza87413 ай бұрын

  Those looks nothing like the e550 caliper

• 
  @MarcoCerqueira3 ай бұрын

  Which ones? The ones I took off or the one I installed?

• 
  @jacques.formateur00603 ай бұрын

  Hello Marco, Always interesting your videos, full of comments and ideas…and you are not afraid to (try/error )until you think is satisfactory for you ! It s just great buddy!! Jacques🇹🇨

• 
  @MarcoCerqueira3 ай бұрын

  Thanks for that!

• 
  @jackleonard20883 ай бұрын

  Nice to see a new video from you. Keep up the great work.

• 
  @MarcoCerqueira3 ай бұрын

  Thanks, will do!

• 
  @nicholasreif34433 ай бұрын

  Nice. Acty video is a great way to start the morning.

• 
  @Melkor543 ай бұрын

  just picked up an 85, doing a fuel injection conversion

• 
  @life_of_ri1ey4 ай бұрын

  Hey how is that flocking holding up these days? Thinking about doing my entire door cards in black flocking.

• 
  @MarcoCerqueira3 ай бұрын

  Held up perfectly. There are two options; rayon and nylon fibers. Nylon is rated for outdoor use which is perfect for high use areas such as door cards.

• 
  @life_of_ri1ey3 ай бұрын

  @@MarcoCerqueira awesome, thanks! That’s what I’ll be doing then!

• 
  @meademorgan66144 ай бұрын

  Awesome video, very informative. Thank you, I just got my ACTY HA3 and was looking at brake components. Man ridiculously expensive, this kit is less than half the price. My ACTY is two wheel drive, .and I don’t have spacers . Will I still need the 1/4 inch spacer behind the rotor? As cheap as you said they were, I’ll use your link and order them any way.

• 
  @MarcoCerqueira3 ай бұрын

  Thanks for watching! Yes you will still need the 1/4” spacer so that the rotor lines up with the caliper. Make sure to use anti-seize on both sides of the spacer. Email me and I can send you the file. Good luck

• 
  @katabi664 ай бұрын

  Great Video thank you. I have 2007 C280 W203 with fiber optic orange wires exactly like yours. Before I watched your video, I was planning on getting the decoder and connecting the decoder to Constant +, ACC +, Ground - and the fiber optic from the car harness to the decoder, then the RCA to the android unit AUX out. Would that work? or do I have to do all the steps that you did? Let me know. Thanks

• 
  @MarcoCerqueira3 ай бұрын

  Email me at [email protected] and I can send you a wiring diagram…thanks

• 
  @bjschandall2854 ай бұрын

  Well done, from a fellow Jersey boy (well, former, now in The South). I have the same HF vice with no place to mount it either: Attach it to a 2 foot length of 2x10 or close to it. Makes it much more stable.

• 
  @MarcoCerqueira4 ай бұрын

  That’s a good idea I have to try that…thanks

• 
  @Ryuts04 ай бұрын

  Need something like this for my Suzuki Carry. Do you sell those brackets?

• 
  @MarcoCerqueira4 ай бұрын

  No sorry.😞

• 
  @joeroe28394 ай бұрын

  Awrsome , who or how did ubdo ur bride seat covers so coooo..keep up the good vids comin

• 
  @MarcoCerqueira4 ай бұрын

  Here is the link for the video on the seats. I explain it all there. Thanks for watching! kzread.info/dash/bejne/ooyqt7CviNawgMY.htmlsi=2B1G5yu44HqGA_uS

• 
  @poet999994 ай бұрын

  i just pulled the plastic and put stickers on the faceplate

• 
  @MarcoCerqueira4 ай бұрын

  That is a simple solution. However that wouldn’t be accurate for me because I’m running larger diameter wheels and tires. Even the OEM speedometer in kph is not correct once you increase the overall diameter of the wheel tire combination. Thanks for watching

• 
  @poet999994 ай бұрын

  @@MarcoCerqueira you can make it accurate as possible. Track on phone GPS for real speed, then make the marks accordingly. Ive not had thr best of luck with vehicle mounted gps speedos. But im in an area with spotty gps

• 
  @danagerds4 ай бұрын

  Very nice. I like the shape of it.

• 
  @MarcoCerqueira4 ай бұрын

  Thank you! Cheers!

• 
  @SelfMadeThousandaire4 ай бұрын

  Great video as always.

• 
  @turkey01654 ай бұрын

  My 95 Honda just started missing, rough running! Positive it's the ECM Module so I bought the correct one at O Reillys for $82.00 Now I need the correct White Thermal Paste between the module and distributor to transfer the heat from the engine build up to the module through the White thermal paste to the cooler distributor, or the new module will fail do to heat! Thanks for the video, I would never gave known had it not been for your video; thanks again! 95 Honda acty 4x4 sdx driver!

• 
  @felipe961504 ай бұрын

  Fala Marco, what's steering ratio on those?

• 
  @MarcoCerqueira4 ай бұрын

  Not sure but not very quick. BMW e30 rack is much nicer.