Пікірлер

• 
  @bakermark68915 сағат бұрын

  Bruhhh!! This Is the best timing Chaín replacement video ... Period!!! You explained everything so perfectly.. AWESOME VIDEO🇺🇲💯🙏🏾

• 
  @adamvalenzuela6626Күн бұрын

  Black interior is the way to go. I have a1966 Chevelle with original black interior.

• 
  @rogerwhiting93102 күн бұрын

  Your resemblance to Kamie Hyneman on Mythbusters is uncanny. Your voices sound exactly the same. A beret would finish it...

• 
  @malicaine92643 күн бұрын

  hello i changed the complete body and the mirror cover but didnt find the way on how to screw the bottom part of the cover because you don't have access to 2 screws hole unless rotating the miror completly , is it possible to open the mirror completely manualy? anyone know how to have acces to these holes?

• 
  @4himsanctified3 күн бұрын

  Quick question... I'm in the midst of doing the Berryman piston soak. I need to replace my valve cover gasket since my 2 and 3 cylinders spark plugs are soaked with oil. I'm wondering if I should replace the gasket now or wait till I'm done with the process?

• 
  @concord252able3 күн бұрын

  What about no air from rear

• 
  @Franco-gn2rn4 күн бұрын

  Did you primed the new tensioners or they come ready to install??

• 
  @kun3lvn8935 күн бұрын

  ❤how very step by step you explain the system.

• 
  @shandegarcia98796 күн бұрын

  I've been struggling for a year can't believe that simple thing can cause a lot of damage and money... I'm safe now 🙏

• 
  @bettyspencer51646 күн бұрын

  If you can what is the name of the parts and how can you run it through the wire that is connected to the part. Do you have a video on it. I have a buick encore 2015, and I need that part for my car. Please help.

• 
  @frankgraczyk64916 күн бұрын

  Thanks! You provided the "little tricks" necessary to do this job the first time without breaking stuff.

• 
  @IAintNoRookie6 күн бұрын

  Can you just take the speaker or do you need the wire that's connected??

• 
  @bettyspencer51646 күн бұрын

  Oh by the way I have a 2014 buick encore. Need the attachment where the sun visor rod connect to.

• 
  @bettyspencer51646 күн бұрын

  What type of tools did you use and how to disconnect the wire.

• 
  @RonnieRichards-x2i7 күн бұрын

  2012 door panel

• 
  @RonnieRichards-x2i7 күн бұрын

  2012 door panel

• 
  @christahall49498 күн бұрын

  Thank you very much for a thorough video

• 
  @mohammednaemwarqa96988 күн бұрын

  good job man !👍

• 
  @cycy.christian8 күн бұрын

  Thank you I pass 2 hours try to remove mine... still there... I don't have this tool but at least now I know how to remove it Thank you SO MUCH

• 
  @ljetzzl32558 күн бұрын

  With this video avoided almost $300 maintenance fee from the dealer

• 
  @Oceanwiew8 күн бұрын

  Hello Chad, I think, I have a similiar problem. Before the problem, I did not see "Phone" mode on the radio screen and always changing radio mode "Phone>Radio>Phone>Radio". I have planned a maintenance for the battery (battery head or cable) I hope, the electrical technician will be fix the problem.

• 
  @anubaral9 күн бұрын

  so deep into the engine and yet didn't change the balance kit wich has a habit of eating the tensioner rail 🤣

• 
  @INFIDEL82AA9 күн бұрын

  PS: Is the comment true? The stating the position of the TDC position being at the exhaust stroke? Thank you.

• 
  @INFIDEL82AA9 күн бұрын

  Yeah, this fix is super easy when the motor is out of the vehicle. Mine just happens to be inside of a Captiva, which is some sort of Japanese f*ck-knot torture box for work space. All I have is a driveway, some tools, a manual, and the internet…. But, Im going to attempt it! Thank you for the information, none the less, because this will be my go-to for on the fly re-call. Thank you!

• 
  @jasonschumacher49211 күн бұрын

  Not great engines! They were garbage from the start!

• 
  @sadgrlpwr11 күн бұрын

  thank you this was so helpful!

• 
  @angiewittman895912 күн бұрын

  Thorough, and clear. Thank you

• 
  @stiggy6042613 күн бұрын

  1. This oil was not changed all that often. 2. This engine has definitely timing chains. 3. I would replace the sprockets, Front Cover and the Front cover gasket. The oil pump is contained in the front cover and it definitely takes a beating on cars without goid oil changes.

• 
  @Mr.Steve-O13 күн бұрын

  Love this video, it is very well done. Wanted to ask though, those Phillips bulbs are H7 which is correct but they are Hologen, not Xenon Fusion (HID) like the originals. Did they still work without any issues and how long did they last you? Thx

• 
  @harleyrider462915 күн бұрын

  Thanks Chad. This really helped.

• 
  @emerireese253915 күн бұрын

  Excellent

• 
  @Amadeo715 күн бұрын

  Thank you very much friend, God Bless you.

• 
  @scottolnhausen482416 күн бұрын

  Glad it worked out for you but you forgot one step the one way valve that feeds to the valve cover should be checked it's location is behind the motor between motor and fire wall .sometimes it fails and parts from it pass through or get stuck in the pcv diaphragm causing damage and pressure fluctuations in the motor

• 
  @BEEZYS-WORLD16 күн бұрын

  I have 03 matrix say misfire in cylinder 1 how do I know which one is 1

• 
  @mylezzpurhourr17 күн бұрын

  This doesn’t work on CVTs to you Honda and Nissan folks!

• 
  @ididntdoit725217 күн бұрын

  Ha I was freaking out out that left side cam now I know not to thanks bud

• 
  @stephaniehernandez_9017 күн бұрын

  I purchased my vehicle about 2 months ago and it had clear liquid in the reservoir. Went I went to get the coolant from the auto parts store, they gave me the one you mentioned. The liquid that was in the reservoir was almost gone so I went ahead and added the new one I bought. Will I have any issues for having mixed the coolants? Please advise 😅

• 
  @jessehernandez84117 күн бұрын

  Do you have a trunk light video

• 
  @CautionHighWavesAhead-19 күн бұрын

  It's the dumbest design for a door hinge but this is GM so it's expected.

• 
  @derek484419 күн бұрын

  Thank you for being clear and basic better than other videos

• 
  @victorgutierrez196520 күн бұрын

  Don’t bother trying that if the engine is seized, you’ll never be able to disconnect the torque converter.

• 
  @normli8606Күн бұрын

  I was wondering the same thing. So there isn't enough clearance on the passenger side to slide it off with the torque converter still attached?

• 
  @wolfmanking10020 күн бұрын

  After installation new part you need the car. need the alignment, or not ?

• 
  @MB-bn9pl21 күн бұрын

  Love the way you explain things and capture what is going on

• 
  @MegHilbs21 күн бұрын

  Thank you so much! This was the easiest instructional video to follow and now my tail light is working 🙏

• 
  @MaxyRepairs21 күн бұрын

  Good evening guys Hope you both good keeping Please provide me da Torque spec of this full engine I am a rebuild from scretch Thank you Keep doing the good work Well done.

• 
  @ytnax22 күн бұрын

  Thanks so much buddy! Really appreciate the straight forward instructions! Keep it up! Happy 4th!

• 
  @crazychannel139222 күн бұрын

  Why didn't you tell us where to flush the coolant

• 
  @dkennedy988522 күн бұрын

  shit sounds brutal im scared to pull panel off lol ill let the shop do it lol

• 
  @nerycorea569922 күн бұрын

  😅😅😢😢😅 0:10 😅😅😅 0:10 😢😅07r. 0:11 😢 0:11

• 
  @TheLostAndNotFound22 күн бұрын

  Oh wow. This was surprisingly super easy and fast! Thanks! I was about to take it to the dealership to get it fixed. Saved me time and money!