How can I contact you to buy the brake conversion kit ?
@Mr_getinthere2 күн бұрын
U got Ig ??
@Mr.Reign9104 күн бұрын
What about the rear brakes?
@Mr_getinthere4 күн бұрын
I have them too
@jessegonzalez70355 күн бұрын
Where’s the sound ?
@terrancewilliams50766 күн бұрын
bro got motion
@terrancewilliams50766 күн бұрын
color pressure
@BoomarangPimp6 күн бұрын
Do you think the LS1 rear brake kit will fit on it?
@vb54576 күн бұрын
😮
@vb54576 күн бұрын
What happened to happy your people???🤷🏿♂️
@chefmitchell45139 күн бұрын
Hell yeah bro
@Mr_getinthere9 күн бұрын
💯💯💯
@arlindkrasniqi331512 күн бұрын
Bro what did you record this with? A potato? Come on bro its 2024 get a better camera
@Mr_getinthere12 күн бұрын
😂😂😂😂, is the car wet or not ?
@reekz156813 күн бұрын
Good shit
@BADAZZ93STANG14 күн бұрын
Yessir!!! Wet Wet!!! Wuzzup brotha!!!
@terenceih19373623 күн бұрын
Hey man… where did u find the “not give a fuk” about the people who didn’t listen the first time… I need to buy some of those😂😂😂😂😂
@Mr_getinthere23 күн бұрын
Lmao , 145 shipped fam
@jaybaker221028 күн бұрын
Can I get a price
@Mr_getinthere28 күн бұрын
1500 shipped
@vicwalter991829 күн бұрын
Can you do that to 70 cutlass
@Mr_getinthere29 күн бұрын
Yess
@vicwalter991829 күн бұрын
Lol im with you thanks for info hatters will always have something negative to say big bro keep doing your thing been rocking with you for years back when nova 2 ns was doing that Malibu
@chesterkinder2729Ай бұрын
I wonder if it would work on a 68 Camaro?
@Mr_getinthereАй бұрын
I have a kit for that car ,this one won't work
@yvesrlachance3832Ай бұрын
Wicked job looks awesome
@dnthateme559Ай бұрын
That gear thing u said that we have to knock off with a hammer cuz it wont fit in the cutlass. Is that true for all gbodys? Would i have to knock it off to get it to fit for my elco?
@Mr_getinthereАй бұрын
Yes you have too knock the abs ring gear off
@dieselapegarageАй бұрын
Appreciate the tips and tricks man I'm about to try to tackle it right now on a G-Body frame myself keep it coming watching an learning 👀🍿💪
@hectorconcepcion5777Ай бұрын
Only reason I subscribed is because this is for the guys who just want to burn a little rubber leaving the!
Have to try this sometime, Im a fan of there other products. I'm due to order something for my next project, was going to use their other product that does well over rust, I think its the DTA epoxy? I think POR is excellent but extremely finicky. First, Paint Over Rust is misleading. They have you convert the rust first via a phosporic acid wash. You then have to rinse the crap out of it IIRC, and then make sure its dry. Then and only then can you put the POR on. The prep is extensive, but to me, the worst part is top coating, which, as you mentioned, is a must if the part will see any UV. You have a very short window to apply a second coat of POR, and the same goes for top coat. Otherwise, you have to scuff, clean, and then recoat. Temperatures need to be pretty warm amd its got isocyanides, so you need a respirator - I lost about 5 lbs of sweat the last time I used it. Oh, and god help you if you want to keep a partial can of POR around.
@RobdaCutlassking87Ай бұрын
My snap ring came off and let the spring fall down...sad
@M33LTicket2 ай бұрын
You have these brackets for 96 caprice
@Mr_getinthereАй бұрын
Yea hubs 325 bracket 275
@RESTLESSOFFICIAL2 ай бұрын
How often do you gotta be replacing them ? Since they are bronze?
@Mr_getinthere2 ай бұрын
I haven't had a sett you need to be replaced
@shermandavis91482 ай бұрын
What's the name of that color bro
@shermandavis91482 ай бұрын
Wet
@WarrenGBody2 ай бұрын
Clean color!
@BoyntonBeach-my1bz2 ай бұрын
🥶💯💯🙏
@bryantracing30222 ай бұрын
I had both 10 bokt and 12 bolt never broke either
@1tonystunts2 ай бұрын
Bro how much you charge to cut my gbody hubs if I send em out to you?
@johnnysaprano52522 ай бұрын
New subscriber bro keep going my g 🔥🔥
@Mr_getinthere2 ай бұрын
Thanks u fam
@memphis10vet342 ай бұрын
Hey man i got a 6.0 motor was the best way to go if i want a 4.10 gears n posi b my 1979 Chevy malibu it have the original rearend
@Mr_getinthere2 ай бұрын
This posi here or torsen zexel
@memphis10vet342 ай бұрын
@@Mr_getinthere can u link me wat to get if u dont mind
@dennisalejandre2 ай бұрын
Could u make this work for a square body c10?
@Mr_getinthere2 ай бұрын
Yess it's the same bracket that will work for that truck , 275 bracket , 325 hubs ,.r rear bracket 220
@dmoney28982 ай бұрын
Oh shit... That's the cutty frame ain't it? 🧐
@Blackmann-ov9uv2 ай бұрын
✊🏾✊🏾✊🏾💪🏾💪🏾💪🏾💯💯💯
@estevanrodriguez71812 ай бұрын
I got the same 6 piston and 15.5 inch rotors off a 2020 CTSV-V3. What bracket kit did u use?
@jamesashford14482 ай бұрын
Bro how do i order this for my c10
@jamesashford14482 ай бұрын
Bro how do i order this for my c10
@mr2hard2see2 ай бұрын
I’m building the exact same thing bruh on my 83 cutty.
@interestinglyso44042 ай бұрын
Are u going to di installation video ?
@Mr_getinthere2 ай бұрын
I have one for brembo brakes
@jasonwright36402 ай бұрын
🫡🫡🫡🫡🫡
@RalphWalter-hu6gm2 ай бұрын
Any way to get the paint code for that color?; I've got a 1995 Chevrolet Caprice I think that would look good on the bubble!
@shermandavis91482 ай бұрын
That's fly ass hell
@montecarlo74372 ай бұрын
You have to ask bro? 6 piston all the way. Run those big wheels
@deviuss84162 ай бұрын
That is a clean ass flip flop spray out!! Great job!!
Пікірлер
How can I contact you to buy the brake conversion kit ?
U got Ig ??
What about the rear brakes?
I have them too
Where’s the sound ?
bro got motion
color pressure
Do you think the LS1 rear brake kit will fit on it?
😮
What happened to happy your people???🤷🏿♂️
Hell yeah bro
💯💯💯
Bro what did you record this with? A potato? Come on bro its 2024 get a better camera
😂😂😂😂, is the car wet or not ?
Good shit
Yessir!!! Wet Wet!!! Wuzzup brotha!!!
Hey man… where did u find the “not give a fuk” about the people who didn’t listen the first time… I need to buy some of those😂😂😂😂😂
Lmao , 145 shipped fam
Can I get a price
1500 shipped
Can you do that to 70 cutlass
Yess
Lol im with you thanks for info hatters will always have something negative to say big bro keep doing your thing been rocking with you for years back when nova 2 ns was doing that Malibu
I wonder if it would work on a 68 Camaro?
I have a kit for that car ,this one won't work
Wicked job looks awesome
That gear thing u said that we have to knock off with a hammer cuz it wont fit in the cutlass. Is that true for all gbodys? Would i have to knock it off to get it to fit for my elco?
Yes you have too knock the abs ring gear off
Appreciate the tips and tricks man I'm about to try to tackle it right now on a G-Body frame myself keep it coming watching an learning 👀🍿💪
Only reason I subscribed is because this is for the guys who just want to burn a little rubber leaving the!
What’s that part called I need it for a MC
Gbody header panel
How can I order me some brackets for my truck
[email protected]
Have to try this sometime, Im a fan of there other products. I'm due to order something for my next project, was going to use their other product that does well over rust, I think its the DTA epoxy? I think POR is excellent but extremely finicky. First, Paint Over Rust is misleading. They have you convert the rust first via a phosporic acid wash. You then have to rinse the crap out of it IIRC, and then make sure its dry. Then and only then can you put the POR on. The prep is extensive, but to me, the worst part is top coating, which, as you mentioned, is a must if the part will see any UV. You have a very short window to apply a second coat of POR, and the same goes for top coat. Otherwise, you have to scuff, clean, and then recoat. Temperatures need to be pretty warm amd its got isocyanides, so you need a respirator - I lost about 5 lbs of sweat the last time I used it. Oh, and god help you if you want to keep a partial can of POR around.
My snap ring came off and let the spring fall down...sad
You have these brackets for 96 caprice
Yea hubs 325 bracket 275
How often do you gotta be replacing them ? Since they are bronze?
I haven't had a sett you need to be replaced
What's the name of that color bro
Wet
Clean color!
🥶💯💯🙏
I had both 10 bokt and 12 bolt never broke either
Bro how much you charge to cut my gbody hubs if I send em out to you?
New subscriber bro keep going my g 🔥🔥
Thanks u fam
Hey man i got a 6.0 motor was the best way to go if i want a 4.10 gears n posi b my 1979 Chevy malibu it have the original rearend
This posi here or torsen zexel
@@Mr_getinthere can u link me wat to get if u dont mind
Could u make this work for a square body c10?
Yess it's the same bracket that will work for that truck , 275 bracket , 325 hubs ,.r rear bracket 220
Oh shit... That's the cutty frame ain't it? 🧐
✊🏾✊🏾✊🏾💪🏾💪🏾💪🏾💯💯💯
I got the same 6 piston and 15.5 inch rotors off a 2020 CTSV-V3. What bracket kit did u use?
Bro how do i order this for my c10
Bro how do i order this for my c10
I’m building the exact same thing bruh on my 83 cutty.
Are u going to di installation video ?
I have one for brembo brakes
🫡🫡🫡🫡🫡
Any way to get the paint code for that color?; I've got a 1995 Chevrolet Caprice I think that would look good on the bubble!
That's fly ass hell
You have to ask bro? 6 piston all the way. Run those big wheels
That is a clean ass flip flop spray out!! Great job!!
This go crazy
I need one for g body what's the price
1500 shipped