I hope to provide the best in free entertainment for my fellow youtubers. I post everything from "how to videos" to "funny videos" so stay tuned. I hope in the coming year to increase content to at least 1 video per week, take care everyone.
Hmmm, seems like a pretty huge job. Thanks for being the guinea pig for us.
@deluxepressure10 сағат бұрын
A lot of bitching and moaning need more lights more light, oh batteries so heavy. But I need more power. I’m not even a Dewalt fan if it was made in America, it would’ve been even more expensive because somebody has to pay for employee insurance! That’s why I stick with my Milwaukee, precise and compact
@THEBEARDEDTOOLGUYКүн бұрын
The battery with a Base LIGHT NICE
@MrBostonBillyКүн бұрын
If it's got a defect take it back get another, mine was fine and works fabulous getting another for the shop
@Sunshone7311Күн бұрын
@@MrBostonBilly I don’t give a passes, Dewalt needs to tighten their QC.
@THEBEARDEDTOOLGUYКүн бұрын
Mine was great did a live UNBOXING with it and i THINKING about Turning it into a 3/8 ANVIL in and getting another one just have to do my RESEARCH i get BORED FAST and it has CO$T me about $10.000 in Cordless power tools and OPE
@minhdaubu2363Күн бұрын
A lot of people say It tends to automatically switch to lower speed mid way when driving large fastener. Can you test to see if it does that?
@Sunshone7311Күн бұрын
Will do
@THEBEARDEDTOOLGUYКүн бұрын
It down shifts into 2 speed but only under HEAVY LOAD I don't like the HEAT the 860 puts out when you really work it Hard
@minhdaubu2363Күн бұрын
@@THEBEARDEDTOOLGUY if the that’s not in the spec and not intended by Dewalt then that’s defect.
@gdu370Күн бұрын
tighten the screws
@Sunshone7311Күн бұрын
Screws are tight, it’s a casting issue.
@slingin_tiresКүн бұрын
That doesn't qualify as a defect
@Sunshone7311Күн бұрын
Name me one Dewalt tool that does that. I’ve never seen it and it’s most certainly a manufacturing defect.
@slingin_tiresКүн бұрын
@@Sunshone7311 I mean it certainly doesn't affect the performance at all
@Sunshone7311Күн бұрын
@@slingin_tires It’s a $200 tool, this isn’t from Harbor Freight. You pay more so you don’t get things like this. I would like Dewalt to see this video.
@nickp32702 күн бұрын
mine came out of the box with the gap too!!! im so glad it wasnt just me lol its been driving me crazy
@Sunshone73112 күн бұрын
@@nickp3270 Glad to hear he wasn’t just me. It’s not right and Dewalt should recall them.
@nickp32702 күн бұрын
@@Sunshone7311 agreed obviously im not glad yours was messed up lol i just thought i got the only one like that also they should have put a specialized mode like dewalts precision mode on this impact because its impossible to use on any delicate work the milwaukee is able to do delicate work with the trigger alone
@Sunshone73112 күн бұрын
@@nickp3270 I had a typo in my reply, hope that didn’t come off wrong, lol. “He” should have been “glad to hear “it” wasn’t just me.”
@thehegt11 күн бұрын
Hi , may i know how much is the brakes and rotors cost to complete the job
@JasPlun12 күн бұрын
I prefer Honda GX 200 engines I am not a fan of the Predator just my personal preference. I have an older Kawasaki FR 691V on my older mower. I have been tempted to try and put it on a Mini-Bike ha ha! I am afraid it will stick out the sides too much though.
@mtso112216 күн бұрын
May I know how to identify the common wire?
@jdreynolds2916 күн бұрын
Thanks for the walkthrough , full of valuable information
@leonardchizoba38917 күн бұрын
How much can one get these cars now?
@Legalize_Meth18 күн бұрын
You should see the Cummins oil filter it’s in an even worse location
@bowwow750523 күн бұрын
TY, who knew? Not me
@fatmirsejdini599226 күн бұрын
What a tiny oil filter. I remember them being bigger on the 3rd gen
@cindel848628 күн бұрын
My Goodman doesn’t have a capacitor connected to the blower, should I be concerned or is that typical normal? So far I haven’t noticed anything else with my unit.
@lylereinier498928 күн бұрын
For gods sake people. If you take your time and give the filter time to drain bit by bit as you remove it! You don’t get oil all over the place or on any part of the truck. As for the sway bar or cross member big deal, it cleans right off.
@Thuglyfee_29 күн бұрын
My 2015 Honda accord exl was totaled & fixed almost back to new. I don’t have the intake resonator on due to reconstruction. It can’t fit now. Is my car still fine to drive? The air box filter is on but the circle part is open. Do I need to close it? Also I can’t find the name of the ac line with the blue cap.
@georgemariahogan2693Ай бұрын
I totally agree with you. This is the absolutely worse vehicle to change oil in I have ever had. Just did it yesterday 2019 Ram Longhorn 1500. I did manage to fill the filter up with oil and get it back up there without spilling it but it sure sucks to take it off. Thank you for the video and your patience. Take care and enjoy your Ram
@jayvlog9841Ай бұрын
where u gona rising mount
@BP8599Ай бұрын
Great video. Very well done and thoroughly helpful. Thank you.
@bammerbiff1621Ай бұрын
Great video. Mine's the 3.6L and it isn't much easier (except the filter...maybe). The filter location on the V6 is directly to the left of the oil fill neck but under a plastic cover (because why not). At least we all lube our sway bars every 5k miles or so.
@denverdanorenoАй бұрын
To the point and informative with classy articulation. What more is there to like ? The flex tools!
@HJ-jy7fwАй бұрын
Thanks!
@walshep7Ай бұрын
Does it matter where you connect each of the brown cables or are they both the same?
@landfnbr6215Ай бұрын
Hey do the harbor freight predator engines 212 cc fit in a B200R? My engine blew up I need a engine that fits
@Sunshone7311Ай бұрын
You’ll need to do some modifications to make it fit mostly you’ll need to make sure that it’s the same shaft size and not a five eights because the harbor freight engine is three-quarter inch. You can buy an adapter but generally, it’s better just to get a different clutch assembly or switch to a CVT.
@landfnbr6215Ай бұрын
@@Sunshone7311 could I get a torque converter? Would it fit better with one?
@darin271Ай бұрын
There are several oil filter relocation kits for the RAM 5.7L. There is also an oil plug extension.
@alexvaro8326Ай бұрын
Thats not a 2013 1.8L
@angelomartinez26032 ай бұрын
Even the dealership where I had my first oil change done on my Ram obviously just let oil get everywhere. It smelled enough that I thought I had a leak when I got home. Most vehicles today suck for the owner to do any routine maintenance.
@seb91682 ай бұрын
Thanks. Can I extend the capacitor wiring on the air handler which is in the attic to make it easier to reach? Not as young as I once was.
@Sunshone73112 ай бұрын
Yes, but not too long because it needs to be close to the fan.
@seb91682 ай бұрын
@@Sunshone7311 I want to extend it 3 ft. Does the capacitor have to be enclosed?
@Sunshone73112 ай бұрын
@@seb9168you’ll have to check your local code, but generally yes it does have to enclosed. I would suggest no longer than 18” because it is high current. The wiring will need to be the same gauge and spliced very well.
@tonylee17552 ай бұрын
Thank you.
@davidramallo37302 ай бұрын
DESARMÓ MEDIO AUTO😢
@ahmedjaji89202 ай бұрын
How do u know when to service it or change the engine oil
@user-qm2ti2pv3s2 ай бұрын
It’s a good thing
@DWadeH942 ай бұрын
My new speakers won’t play unless I plug the old tweeter back in as well. How do I fix?
@abbasshokrieh61922 ай бұрын
❤very good.thnks
@nicksilva67242 ай бұрын
When he talks about having to hammer out the lower knuckle Bolt the easiest way is to take a second smaller Jack and put it under the lower control arm joint it's located just right on the other side of the lower part of the brake disc then raise it enough so there's no pressure from the strut and it pops right out with ease😊
@jordonstreet9352 ай бұрын
Everything I needed answer in a quick manner.. nice work thanks man
@DMoore55032 ай бұрын
Just completed following your instructions. My only request would be that you add the tool and socket sizes to the video description; otherwise, fantastic walkthrough.
@chefchutardo52152 ай бұрын
i was hoping to do this on mine soon. Is the window interfering with the speaker magnet when its rolled down ? I was hoping to put some 6.5" speakers that need a lot of space in the back for a very big and thick magnet.
@1954933 ай бұрын
How you remove the glue ?
@user-hl4gh4bt5m3 ай бұрын
hello, from where u find your repair manaul. tank you
@robkingston45183 ай бұрын
Awesome, thanks! So thorough and meticulous! Man... That engine bay, so clean! If you hadn't said the mileage, i would have guessed it was brand new!
@Sunshone73113 ай бұрын
Thank you, it’s easier to keep clean in California
@GGFROOK3 ай бұрын
10k miles oil change?
@stereolababy3 ай бұрын
who cares if oil gets on the sway bar jeez
@gmailcgs3 ай бұрын
Pro tip, put jack stands under while up on those cheap plastic ramps. When the truck falls on you,.. you'll wish you did put the jack stands
Пікірлер
Hmmm, seems like a pretty huge job. Thanks for being the guinea pig for us.
A lot of bitching and moaning need more lights more light, oh batteries so heavy. But I need more power. I’m not even a Dewalt fan if it was made in America, it would’ve been even more expensive because somebody has to pay for employee insurance! That’s why I stick with my Milwaukee, precise and compact
The battery with a Base LIGHT NICE
If it's got a defect take it back get another, mine was fine and works fabulous getting another for the shop
@@MrBostonBilly I don’t give a passes, Dewalt needs to tighten their QC.
Mine was great did a live UNBOXING with it and i THINKING about Turning it into a 3/8 ANVIL in and getting another one just have to do my RESEARCH i get BORED FAST and it has CO$T me about $10.000 in Cordless power tools and OPE
A lot of people say It tends to automatically switch to lower speed mid way when driving large fastener. Can you test to see if it does that?
Will do
It down shifts into 2 speed but only under HEAVY LOAD I don't like the HEAT the 860 puts out when you really work it Hard
@@THEBEARDEDTOOLGUY if the that’s not in the spec and not intended by Dewalt then that’s defect.
tighten the screws
Screws are tight, it’s a casting issue.
That doesn't qualify as a defect
Name me one Dewalt tool that does that. I’ve never seen it and it’s most certainly a manufacturing defect.
@@Sunshone7311 I mean it certainly doesn't affect the performance at all
@@slingin_tires It’s a $200 tool, this isn’t from Harbor Freight. You pay more so you don’t get things like this. I would like Dewalt to see this video.
mine came out of the box with the gap too!!! im so glad it wasnt just me lol its been driving me crazy
@@nickp3270 Glad to hear he wasn’t just me. It’s not right and Dewalt should recall them.
@@Sunshone7311 agreed obviously im not glad yours was messed up lol i just thought i got the only one like that also they should have put a specialized mode like dewalts precision mode on this impact because its impossible to use on any delicate work the milwaukee is able to do delicate work with the trigger alone
@@nickp3270 I had a typo in my reply, hope that didn’t come off wrong, lol. “He” should have been “glad to hear “it” wasn’t just me.”
Hi , may i know how much is the brakes and rotors cost to complete the job
I prefer Honda GX 200 engines I am not a fan of the Predator just my personal preference. I have an older Kawasaki FR 691V on my older mower. I have been tempted to try and put it on a Mini-Bike ha ha! I am afraid it will stick out the sides too much though.
May I know how to identify the common wire?
Thanks for the walkthrough , full of valuable information
How much can one get these cars now?
You should see the Cummins oil filter it’s in an even worse location
TY, who knew? Not me
What a tiny oil filter. I remember them being bigger on the 3rd gen
My Goodman doesn’t have a capacitor connected to the blower, should I be concerned or is that typical normal? So far I haven’t noticed anything else with my unit.
For gods sake people. If you take your time and give the filter time to drain bit by bit as you remove it! You don’t get oil all over the place or on any part of the truck. As for the sway bar or cross member big deal, it cleans right off.
My 2015 Honda accord exl was totaled & fixed almost back to new. I don’t have the intake resonator on due to reconstruction. It can’t fit now. Is my car still fine to drive? The air box filter is on but the circle part is open. Do I need to close it? Also I can’t find the name of the ac line with the blue cap.
I totally agree with you. This is the absolutely worse vehicle to change oil in I have ever had. Just did it yesterday 2019 Ram Longhorn 1500. I did manage to fill the filter up with oil and get it back up there without spilling it but it sure sucks to take it off. Thank you for the video and your patience. Take care and enjoy your Ram
where u gona rising mount
Great video. Very well done and thoroughly helpful. Thank you.
Great video. Mine's the 3.6L and it isn't much easier (except the filter...maybe). The filter location on the V6 is directly to the left of the oil fill neck but under a plastic cover (because why not). At least we all lube our sway bars every 5k miles or so.
To the point and informative with classy articulation. What more is there to like ? The flex tools!
Thanks!
Does it matter where you connect each of the brown cables or are they both the same?
Hey do the harbor freight predator engines 212 cc fit in a B200R? My engine blew up I need a engine that fits
You’ll need to do some modifications to make it fit mostly you’ll need to make sure that it’s the same shaft size and not a five eights because the harbor freight engine is three-quarter inch. You can buy an adapter but generally, it’s better just to get a different clutch assembly or switch to a CVT.
@@Sunshone7311 could I get a torque converter? Would it fit better with one?
There are several oil filter relocation kits for the RAM 5.7L. There is also an oil plug extension.
Thats not a 2013 1.8L
Even the dealership where I had my first oil change done on my Ram obviously just let oil get everywhere. It smelled enough that I thought I had a leak when I got home. Most vehicles today suck for the owner to do any routine maintenance.
Thanks. Can I extend the capacitor wiring on the air handler which is in the attic to make it easier to reach? Not as young as I once was.
Yes, but not too long because it needs to be close to the fan.
@@Sunshone7311 I want to extend it 3 ft. Does the capacitor have to be enclosed?
@@seb9168you’ll have to check your local code, but generally yes it does have to enclosed. I would suggest no longer than 18” because it is high current. The wiring will need to be the same gauge and spliced very well.
Thank you.
DESARMÓ MEDIO AUTO😢
How do u know when to service it or change the engine oil
It’s a good thing
My new speakers won’t play unless I plug the old tweeter back in as well. How do I fix?
❤very good.thnks
When he talks about having to hammer out the lower knuckle Bolt the easiest way is to take a second smaller Jack and put it under the lower control arm joint it's located just right on the other side of the lower part of the brake disc then raise it enough so there's no pressure from the strut and it pops right out with ease😊
Everything I needed answer in a quick manner.. nice work thanks man
Just completed following your instructions. My only request would be that you add the tool and socket sizes to the video description; otherwise, fantastic walkthrough.
i was hoping to do this on mine soon. Is the window interfering with the speaker magnet when its rolled down ? I was hoping to put some 6.5" speakers that need a lot of space in the back for a very big and thick magnet.
How you remove the glue ?
hello, from where u find your repair manaul. tank you
Awesome, thanks! So thorough and meticulous! Man... That engine bay, so clean! If you hadn't said the mileage, i would have guessed it was brand new!
Thank you, it’s easier to keep clean in California
10k miles oil change?
who cares if oil gets on the sway bar jeez
Pro tip, put jack stands under while up on those cheap plastic ramps. When the truck falls on you,.. you'll wish you did put the jack stands
The plastic ramps are fine, they don’t break.
Upgrade that battery to a 35R!
taking off the cover is not a "tear down"