I know what you mean about the lids - need a lot of care to avoid chipping the glass. Your more recent video about the leaking is worth watching.
@bobsfishytailsКүн бұрын
I have the 182 with exactly the same problem - water coming out by capillary action which was made worse by my tank developing a slight lean. I managed to re-level the tank and for now stopped the leaks with silicon and dropping the water level. I would not buy another,
@user-iw4ty3jx9mКүн бұрын
2 amp x 6 ports at once = 12a. In no way would that trip a breaker. It’s too bad they don’t sell such a model.
@alandouglas27896 күн бұрын
Can you please explain what the plastic knobs do on the back? The two seem to slide something up and down
@johnmossy375714 күн бұрын
Love mine great little light. Mine had the same problem. Simple fix: stretch the spring problem solved.
@mcplutt15 күн бұрын
What would happen if you played real music? 😄
@bigredracingdog46621 күн бұрын
Couldn't finish this vid due to all the camera wiggling...
@stevenstjohn668126 күн бұрын
Thanks for the review nice heater
@ZeeshanGondal59927 күн бұрын
You a legend mate. Cheers!!
@user-jt5vm3mi1wАй бұрын
Is that with the supplied battery?
@1267DeanoАй бұрын
Where is the link for the company ? I would like to buy one if there not to expensive 👍🤔
@1267DeanoАй бұрын
Where is the link for the company ? I would like to buy one if there not to expensive 👍🤔
@Stevegrande1Ай бұрын
Hey mate how did you go with connecting the gas up ?? I just bought this heater from Bunnings but the gas connections are both female so female thread on both. Not sure where you are located but I’m in Sydney, the gas battle has internal thread and so does the black connection on the heater
@spudgun4728 күн бұрын
New bbqs and stuff have an external thread so black handle not green
@Stevegrande128 күн бұрын
@@spudgun47Thankyou. Yes found that out since my post
@lexicase8805Ай бұрын
So if you leave it on and full overnight, and the ice melts, it doesn't just pump the water up again and reuse it like the bullet ice makers? I have a bullet type devanti machine and too many plastic moving parts, it breaks frequently and i repair it and it breaks again because the stress on the moving parts is crazy. I like ice ready to go first thing in the mornings so the bullet machine is good like that, just re makes the melted ice back into fresh ice over and over until theres too much ice or not enough water. Hoping this unit would do the same. I don't have a big enough freezer to be storing ice
@seanlovall4221Ай бұрын
Your mic can't process the bass, sad to say. That being it probably means it is really good.
@georginjose7430Ай бұрын
How long it will take it ignite full
@theworldsbonkersАй бұрын
Pick mine up tomorrow 😊
@stevenrobertson7069Ай бұрын
Why not use the Ryobi 12v adapter beside the 240v.. you will.get more run time
@virgiljohnson4260Ай бұрын
brilliant! I use my 18v inverter for all kinds of things. I can run a full size fridge off the 20v battery and 300W inverter (when the power goes out)
@udinsalam47512 ай бұрын
you just saved my money. Thanks. I'll wait for an upgraded version (if any in the future)
@Umi-Dgaf2 ай бұрын
Link? I can't find these anywhere and I'm in need
@Sur6402 ай бұрын
I’ve had one for a couple of months and no leaks yet .no other complaints on any forums or youtube on the horizon models curved front was a disaster. I would have made a claim to Petbarn where I got mine straight away .
@leonshao57652 ай бұрын
I think it will be a little faster ,if you are in sport and manual mode 🤔
@STANDUP472 ай бұрын
Holy that is fast!!!
@ilyameshcheryakov70942 ай бұрын
Looks like they fixed that flaw in latest version, battery sits absolutely tight, it's 21700 battery with protection board (that adds few millimeters to battery length). I also have Convoy with 21700 without protection board, I tried to put this battery in NWL20, and as I thought it's too small, doesn't even touch both contacts. So if you want to have spare battery for NWL20 you should buy protected 21700, most likely it will fit, if not - use the coin. By the way, both batteries work fine in Convoy S21E.
@randomescu2 ай бұрын
i considered this, LedLenser W6R Work and the Olight Swivel Pro and ProMax. thanks for the input, i ended buying a Fenix CL26R.
@Lee-lb9qhАй бұрын
Dude Dewalt made a light just like this! It's 1000 lumens, getting that instead
@deeeyewhy59492 ай бұрын
I’m Waiting for the ryobi days sale this summer hoping I can get the ryobi high torque with 2 ho batteries and 2 free tools for $279. I have the p262 and it’s great I also have the 3/8” extended reach ratchet I got them both with a charger and 4 batteries for $350 usd. Ryobi is a great option I’m not sure that Milwaukee is worth the difference in price. TTI makes good tools regardless of the brand but why pay 33-66% more for something that’s just as good as the cheaper option?
@MJMDiY90913 күн бұрын
Any luck on sales for Ryobi days
2 ай бұрын
You got your money's worth.
@martintongper67032 ай бұрын
❤❤❤
@ibnugracie44672 ай бұрын
Same problem as mine, fixed by putting a five cents US coin on it's (-) end, no more rattling
@MrJamesdimaano15162 ай бұрын
i just wrapped electrical tape on the battery it fixed the flickering. the battery indicator is still faulty on my unit though..
@techhead31242 ай бұрын
Not a bad idea might give that a try not that we should be doing these things on a new product
@monnimunday24382 ай бұрын
How did you build the stand? I’m having troubles because there was no instructions
@trademark451122 күн бұрын
Did you figure it out? You can find the instructions online
@drive-channel18342 ай бұрын
Can we add a copper washer to remove the slack?
@The_Animal_Man2 ай бұрын
What would happen if I replaced the radiater with another comp rt sub? Would it sound better?
@predatoryfishkeepingАй бұрын
No the radiator is there for a reason , it has a purpose box is too small for 2 12s
@That_Stanced_Toyota2 ай бұрын
Gonna throw one of these in my single sub slim box that’s sealed with a 1,600 watt amp once my 48cdf124 blows. Or the basic kicker comp 12. Hoping it blows soon! been pushing its limits. They recommend 150rms 300 peak. I run a 300 peak BUUUUT that’s cause ima run a 180-200rms and the amp probably clips being a 1,600 watt amp which isn’t good for the sub and can do the same as over powering it. Hopefully she lets go sometime soon! No signs of blowing as of right now though💀🤘🏼
@cybersarge68913 ай бұрын
Fella needs a bath
@ssfsteve3 ай бұрын
I hope you clean that contraption. And you are supposed to lock down the blade with a screwdriver before removing and replacing. 😂 You’re also supposed to rebalance when you sharpen such a beat up blade. Finally, what language are you speaking? 😂😂🤣
@augustoghisleni9613 ай бұрын
Try using a Fenix 21700 battery, it is a bit longer
@andrysuryadi3 ай бұрын
Phew I recently near to buy, but you saved me Hopely they quickly replace it or recall the products on the market as soon as There you go, Thank you mate Btw, Just wondering how about if we use the flat top battery? Does it fit and still functioning?
@BOMBON1873 ай бұрын
FINALLY a Ryobi tool that looks like it has actually been used and seen some abuse. Thanks mate.
@STANDUP472 ай бұрын
I put mine through abuse. It's an older brushless model. Owned it for about a year now. Because it's only 400Nm there is a fair amount it struggles with. But I just hold the trigger down with some ear defenders on and about 30-40 seconds of impacting and it'll usually get it off. Gets very hot but hey. I think it's finally dying after doing a subrame on my car. Brush is going. So I think I'll replace it with either this P262 or the high torque.
@konstantine3813 ай бұрын
Sounds annoying but it seems like an easy fix? Can stick a stronger spring in there
@andrysuryadi3 ай бұрын
Maybe you can adding a quarter on the bottom of the battery (negative side)
@konstantine3813 ай бұрын
@@andrysuryadiI got mine in the mail a few days ago. No issues even if i shake the light a ton. Id say your one is defective but if returning isnt an option i would think even some tin foil or something would work fine.
@nitecoreservice3 ай бұрын
This is NITECORE Service, and we are glad to help, could you contact us or leave your email for further help?
@fredmccarroll34763 ай бұрын
You might try raising the sub off the floor. I used yoga block under the legs. I have the Klipsch R-SWi down firing sub. and I have hardwood floors. I also placed a bath towel under the sub!
@ohscarivera3 ай бұрын
I have the same issue. The battery doesn't fit well but overall happy with it.
@El-Jalap3 ай бұрын
Yeah rev that shit cold you monster
@billmantelis46703 ай бұрын
Hey mate you need to clean your mower.😮
@superduperboyx4 ай бұрын
SPEAK LOUDER TO THE MIC and STOP MUMBLING!
@rongomez67854 ай бұрын
More like Used and abused! I use Milwaukee and snap on and they last 3 years with the abuse and daily wear and tear...If Ryobi lasts the same amount of time for $200 less guess what I'm using next
@thepubliceye4 ай бұрын
What do you have in your mouth? The tool sounds normal.
Пікірлер
I know what you mean about the lids - need a lot of care to avoid chipping the glass. Your more recent video about the leaking is worth watching.
I have the 182 with exactly the same problem - water coming out by capillary action which was made worse by my tank developing a slight lean. I managed to re-level the tank and for now stopped the leaks with silicon and dropping the water level. I would not buy another,
2 amp x 6 ports at once = 12a. In no way would that trip a breaker. It’s too bad they don’t sell such a model.
Can you please explain what the plastic knobs do on the back? The two seem to slide something up and down
Love mine great little light. Mine had the same problem. Simple fix: stretch the spring problem solved.
What would happen if you played real music? 😄
Couldn't finish this vid due to all the camera wiggling...
Thanks for the review nice heater
You a legend mate. Cheers!!
Is that with the supplied battery?
Where is the link for the company ? I would like to buy one if there not to expensive 👍🤔
Where is the link for the company ? I would like to buy one if there not to expensive 👍🤔
Hey mate how did you go with connecting the gas up ?? I just bought this heater from Bunnings but the gas connections are both female so female thread on both. Not sure where you are located but I’m in Sydney, the gas battle has internal thread and so does the black connection on the heater
New bbqs and stuff have an external thread so black handle not green
@@spudgun47Thankyou. Yes found that out since my post
So if you leave it on and full overnight, and the ice melts, it doesn't just pump the water up again and reuse it like the bullet ice makers? I have a bullet type devanti machine and too many plastic moving parts, it breaks frequently and i repair it and it breaks again because the stress on the moving parts is crazy. I like ice ready to go first thing in the mornings so the bullet machine is good like that, just re makes the melted ice back into fresh ice over and over until theres too much ice or not enough water. Hoping this unit would do the same. I don't have a big enough freezer to be storing ice
Your mic can't process the bass, sad to say. That being it probably means it is really good.
How long it will take it ignite full
Pick mine up tomorrow 😊
Why not use the Ryobi 12v adapter beside the 240v.. you will.get more run time
brilliant! I use my 18v inverter for all kinds of things. I can run a full size fridge off the 20v battery and 300W inverter (when the power goes out)
you just saved my money. Thanks. I'll wait for an upgraded version (if any in the future)
Link? I can't find these anywhere and I'm in need
I’ve had one for a couple of months and no leaks yet .no other complaints on any forums or youtube on the horizon models curved front was a disaster. I would have made a claim to Petbarn where I got mine straight away .
I think it will be a little faster ,if you are in sport and manual mode 🤔
Holy that is fast!!!
Looks like they fixed that flaw in latest version, battery sits absolutely tight, it's 21700 battery with protection board (that adds few millimeters to battery length). I also have Convoy with 21700 without protection board, I tried to put this battery in NWL20, and as I thought it's too small, doesn't even touch both contacts. So if you want to have spare battery for NWL20 you should buy protected 21700, most likely it will fit, if not - use the coin. By the way, both batteries work fine in Convoy S21E.
i considered this, LedLenser W6R Work and the Olight Swivel Pro and ProMax. thanks for the input, i ended buying a Fenix CL26R.
Dude Dewalt made a light just like this! It's 1000 lumens, getting that instead
I’m Waiting for the ryobi days sale this summer hoping I can get the ryobi high torque with 2 ho batteries and 2 free tools for $279. I have the p262 and it’s great I also have the 3/8” extended reach ratchet I got them both with a charger and 4 batteries for $350 usd. Ryobi is a great option I’m not sure that Milwaukee is worth the difference in price. TTI makes good tools regardless of the brand but why pay 33-66% more for something that’s just as good as the cheaper option?
Any luck on sales for Ryobi days
You got your money's worth.
❤❤❤
Same problem as mine, fixed by putting a five cents US coin on it's (-) end, no more rattling
i just wrapped electrical tape on the battery it fixed the flickering. the battery indicator is still faulty on my unit though..
Not a bad idea might give that a try not that we should be doing these things on a new product
How did you build the stand? I’m having troubles because there was no instructions
Did you figure it out? You can find the instructions online
Can we add a copper washer to remove the slack?
What would happen if I replaced the radiater with another comp rt sub? Would it sound better?
No the radiator is there for a reason , it has a purpose box is too small for 2 12s
Gonna throw one of these in my single sub slim box that’s sealed with a 1,600 watt amp once my 48cdf124 blows. Or the basic kicker comp 12. Hoping it blows soon! been pushing its limits. They recommend 150rms 300 peak. I run a 300 peak BUUUUT that’s cause ima run a 180-200rms and the amp probably clips being a 1,600 watt amp which isn’t good for the sub and can do the same as over powering it. Hopefully she lets go sometime soon! No signs of blowing as of right now though💀🤘🏼
Fella needs a bath
I hope you clean that contraption. And you are supposed to lock down the blade with a screwdriver before removing and replacing. 😂 You’re also supposed to rebalance when you sharpen such a beat up blade. Finally, what language are you speaking? 😂😂🤣
Try using a Fenix 21700 battery, it is a bit longer
Phew I recently near to buy, but you saved me Hopely they quickly replace it or recall the products on the market as soon as There you go, Thank you mate Btw, Just wondering how about if we use the flat top battery? Does it fit and still functioning?
FINALLY a Ryobi tool that looks like it has actually been used and seen some abuse. Thanks mate.
I put mine through abuse. It's an older brushless model. Owned it for about a year now. Because it's only 400Nm there is a fair amount it struggles with. But I just hold the trigger down with some ear defenders on and about 30-40 seconds of impacting and it'll usually get it off. Gets very hot but hey. I think it's finally dying after doing a subrame on my car. Brush is going. So I think I'll replace it with either this P262 or the high torque.
Sounds annoying but it seems like an easy fix? Can stick a stronger spring in there
Maybe you can adding a quarter on the bottom of the battery (negative side)
@@andrysuryadiI got mine in the mail a few days ago. No issues even if i shake the light a ton. Id say your one is defective but if returning isnt an option i would think even some tin foil or something would work fine.
This is NITECORE Service, and we are glad to help, could you contact us or leave your email for further help?
You might try raising the sub off the floor. I used yoga block under the legs. I have the Klipsch R-SWi down firing sub. and I have hardwood floors. I also placed a bath towel under the sub!
I have the same issue. The battery doesn't fit well but overall happy with it.
Yeah rev that shit cold you monster
Hey mate you need to clean your mower.😮
SPEAK LOUDER TO THE MIC and STOP MUMBLING!
More like Used and abused! I use Milwaukee and snap on and they last 3 years with the abuse and daily wear and tear...If Ryobi lasts the same amount of time for $200 less guess what I'm using next
What do you have in your mouth? The tool sounds normal.
Speak-up and don't mumble!