Hey, i dont know why, sometimes youtube changes the resolution of the video to 360p. To change this, click on the little gearwheel at the bottom of the video. I think than you should be able to see everythink. Best regards Kai
@DSICCAspres24 күн бұрын
Thank you !
@dominikyda9537Ай бұрын
straight to the point! thanks 👍
@numericalsimulationsАй бұрын
Very helpful!!
@KaizanCalsimanАй бұрын
Thanks, this helps a lot
@martyschaefer862Ай бұрын
Any easy way to Un Apply filters from track? I managed to (prior to this video) add a 'stack' of 5 filters to the track, mostly by accident, that I had used on a previous scene, I was hoping for a one click solution i.e. right click on the hour glass/drip icon ->remove filters. I'll try to remove all 5 individually, or add a new track, delete old track.
@shorttutorialsdonequickАй бұрын
Hey, if you devide the track in multiply clips with a filter on the track it will apply to every clip, but if you remove the filter on the track it will removed from every clip. I hope i get your question right. Best regards Kai
@arindamoiАй бұрын
i dont have internet connection and my interface file is read only.... it doesnt have an ip how can i fix this, apt-get install gedit doesnt work
@arindamoiАй бұрын
i mean my linux doesnt have internet connection
@shorttutorialsdonequickАй бұрын
@@arindamoi Hey, i think this is a solution: askubuntu.com/questions/974/how-can-i-install-software-or-packages-without-internet-offline Best regards Kai
@user-ib8zr3vk2w2 ай бұрын
Thanks bro. Its very very helpful without wasting any time.
@LuizObara2 ай бұрын
tks
@antoniovijande2 ай бұрын
Thanks, guy, I was really frustrated with this topic. Your solution works fine.
@johnsamu2 ай бұрын
Thanks, this video is just what I was looking for, a simple and clear explanation. It's already working for me now👍👍
@markondes6662 ай бұрын
A suggestion for another tutorial, I don't know if it's possible: Filter the map feature being exported in the Atlas + the layer that is intersecting with it. For example, I have a subdivision map, where I have a layer that represents the indexes and another that represents the lots, I can filter the index using the Atlas, but it would also be interesting if I filtered just the lot in question with a similar function with "overlay_within" or something like that.
@shorttutorialsdonequick2 ай бұрын
Hey markondes, thank you for your suggestion. If i understand you right, i think the solution is in the video after 01:14 ? Is that the right solution ? Best regards Kai
@markondes6662 ай бұрын
@@shorttutorialsdonequick Now that you say it, it's true! I hadn't understood this part very well and let it go unnoticed, English isn't my main language. Once again, thank you very much and much sucess to you.
@shorttutorialsdonequick2 ай бұрын
@@markondes666 you are welcome, I am pleased that I was able to help you. Best reagrds Kai
@markondes6662 ай бұрын
Thank you very much, I was racking my brain for hours and couldn't do it at all, you saved me.
@zacariasfloresdelcampo13303 ай бұрын
Thanks a lot!
@aakavous13273 ай бұрын
H,i thanks for your video. 👍🙏❤ I am trying to use vi to edit a -rw-r--r-- modules.blacklist file in android x86 8.1 r6. This file is in /etc directory which 1rwxrwxrwx with -> /system/etc at the end of the listing. I have tried to use: chmod -R 777 etc. But it does not work. And when I try to edit it with vi it says it is readonly. The android installation has not got sudo, and when i type su before the command i dont see any difference. I appreciate it if you please help me chown or chmod or edit the file using vi. Thanks again 🙏🌹❤️🙏
@shorttutorialsdonequick3 ай бұрын
Hey, uh its a hard question. Maybe you try the app's "SuperSU" and/or "Magisk" to get the admin rights. I hope it will help you. Best reagards Kai
@romariocarvalhoneto78314 ай бұрын
Great stuff!
@josefrundstrom4 ай бұрын
Lovely! Just what I was looking for!
@ElfengourAbdelhakGIS4 ай бұрын
Very helpful tutorial, thanks for sharing.
@marshalldaniels98365 ай бұрын
Promo-SM 👀
@raianu1915 ай бұрын
Thank you so much for this tutorial. I was on the verge of doing it manually 😅
@elhamrif.e445 ай бұрын
Its so fast Sir
@mocmichal6 ай бұрын
laz2txt doesnt write any file- any ideas why?
@shorttutorialsdonequick6 ай бұрын
Is LAStools working correctly ? Did you test it ? Is the layer (file) containing the point data ?
@user-hx5ue4bb1x6 ай бұрын
What is the command the resolution is bad
@shorttutorialsdonequick6 ай бұрын
sudo gedit filename
@bangjey54396 ай бұрын
Thank you! this video help me so much.
@bangjey54396 ай бұрын
Thank you! this video help me so much.
@siddharthiyer72448 ай бұрын
Short, sweet and helpful. Thank you! This is how tutorials ought to be.
@incredibledews668 ай бұрын
I am unable to edit ubuntu commands for configuring snort, do you have any suggestions to have read, write and execute permissions
@shorttutorialsdonequick8 ай бұрын
Hey, puh sorry. I dont use snort ... :/ Best regards Kai
@azevedopedro19 ай бұрын
Thank You
@TECHBRUST-kl2nw9 ай бұрын
whats app please BRO 😟
@shorttutorialsdonequick9 ай бұрын
No, sorry. Maybe other peolple can learn from your problem :) so post it here. Best regards Kai
@makintus9 ай бұрын
Thank you so much!
@gambitpandi3199 ай бұрын
bro I need help, I wrote the command sudo apt-get install gedit but it didn’t help, what should I do?
@shorttutorialsdonequick9 ай бұрын
Hey, what error message is displayed?
@RobouVideos9 ай бұрын
I did deverything, but my Ubuntu seems to try to run a "lasview" command instead of a "lasview.exe". And i do have only the .exe in my folder! ersion de QGIS : 3.32.3-Lima Révision du code : 67d46100b5 Version de Qt : 5.15.3 Version de Python : 3.10.12 Version de GDAL : 3.4.1 Version de GEOS : 3.10.2-CAPI-1.16.0 Version de Proj : Rel. 8.2.1, January 1st, 2022 Version de PDAL : 2.3.0 (git-version: Release) Algorithme commencé à: 2023-09-22T14:22:20 Démarrage de l'algorithme 'lasview'… Paramètres en entrée: { 'ADDITIONAL_OPTIONS' : '', 'COLORING' : 0, 'GUI' : False, 'INPUT_LASLAZ' : '/home/romain/Documents/carto/moine/LHD_FXX_1006_6543_PTS_C_LAMB93_IGN69_0_1.laz', 'POINTS' : 5000000, 'SIZE' : 0, 'VERBOSE' : True } LAStools command line /usr/bin/wine /home/romain/.local/share/QGIS/QGIS3/profiles/default/LAStools/bin/lasview -v -i "/home/romain/Documents/carto/moine/LHD_FXX_1006_6543_PTS_C_LAMB93_IGN69_0_1.laz" -points 5000000 LAStools console output 007c:fixme:hid:handle_IRP_MN_QUERY_ID Unhandled type 00000005 007c:fixme:hid:handle_IRP_MN_QUERY_ID Unhandled type 00000005 007c:fixme:hid:handle_IRP_MN_QUERY_ID Unhandled type 00000005 007c:fixme:hid:handle_IRP_MN_QUERY_ID Unhandled type 00000005 wine: failed to open "/home/romain/.local/share/QGIS/QGIS3/profiles/default/LAStools/bin/lasview": c0000135 Execution completed in 4.78 secondes Résultats: {'': None} Chargement des couches de résultat Algorithme 'lasview' terminé
@findeep9 ай бұрын
You are not showing what the title says - you haven't imported xyz and converted to DEM raster - you've merged existing raster files
@shorttutorialsdonequick9 ай бұрын
Hey, im imported the xyz simply by drag and drop, otherwise you can import xyz files via "Data Soucre Manager" than on "raster" and choose your xyz file. It will be transferred into a DEM Raster. Best regards Kai
@findeep9 ай бұрын
@@shorttutorialsdonequick Kai - I apologise - you are absolutely correct-something new learned so thank you
@Kuiperbelttt10 ай бұрын
did you record the video with toaster machine? what the heck? look at that poor quality video.. dude
@shorttutorialsdonequick10 ай бұрын
No, with my Grandma's PC :) ... Sometimes its played with 360p, change it to 1080p. It looks ok for me .... :)
@Kuiperbelttt10 ай бұрын
@@shorttutorialsdonequick I am working on something. I have two object. One is a wall other is a pipe. But the problem is i need to put that pipe inside of the wall and make inside of the pipe empty. There is no resource about it. Can you explain me or make a video about it please? I will going to lose my mind
@shorttutorialsdonequick10 ай бұрын
@@Kuiperbelttt Hey, i dont think paraview is the right tool for that. Have you tried it with OnShape or FreeCad ? Best regards Kai
@Kuiperbelttt10 ай бұрын
@@shorttutorialsdonequick Thank you so much I am gonna check it out!!
@Kuiperbelttt11 ай бұрын
what the heck?
@saty1978200811 ай бұрын
Good, but too fast to follow. Have to pause multiplr times
@adanadow4967 Жыл бұрын
Why is it that SAGA tools are greyed out? and secondly, when running the fill sink tool it displays an error, something like "SAGA version 7.3.0 not officially supported - algorithms may encounter issues" and I have indeed encountered the same problems. Kindly please help. what is the solution? Thank you.
@shorttutorialsdonequick11 ай бұрын
The last official Version of SAGA is 2.0 in 2007. After that the development team decided to make the project open source. Therefore all version bigger than 2.0 are not official supported. Best regards Kai
@Rodrigo.S.Santiago Жыл бұрын
Hi there, Thank you for sharing these video. I am trying to replicate your tutorial on a geometry I've made using python (with SDF and PyScaffolder libraries) but after I follow your instructions but I can't find the GroupID in the dropdown menu. Any tips on what I am doing wrong ?
@shorttutorialsdonequick11 ай бұрын
Hey, mh do you create a STL File out of python ?
@DigitalNomad53234 Жыл бұрын
If there are multiple points in a polygon and you want to calculate the mean of an attribute/column for points inside each polygon, how do do that?
@shorttutorialsdonequick11 ай бұрын
Yes, the name of the tool is "Join attributes by location (summary)" I will make a video about it. Best regards Kai
@DigitalNomad5323411 ай бұрын
@@shorttutorialsdonequick Thank you found it!
@francisconegrao3931 Жыл бұрын
Wow, I think this is the best tutorial I've seen in my life. Short, to the point and simple.
@bigtreeg7690 Жыл бұрын
wow it works! Thanks!
@inceemreince Жыл бұрын
thank you
@hemrog Жыл бұрын
Thank you! Just what I needed to the point!
@architectureengineering9292 Жыл бұрын
Works the same “Layer” * 0 + 1
@shorttutorialsdonequick Жыл бұрын
Thank you, yes it will work, but only if you set your NoData Value. If not maybe you endup with an rectangle of one's. Best regard Kai
@FrederikReese Жыл бұрын
Hi, I always get an error. Layer not created. Can you tell me why?
@shorttutorialsdonequick Жыл бұрын
Hey, are Spaces or other fancy charakters in the path ? Maybe this causes the error. Best regards Kai
@Theflush_ Жыл бұрын
Thank you ! your videos are very helpful! please do more :)
@DaniTessa Жыл бұрын
thank you thank you thank youuu
@abdullahsikder3236 Жыл бұрын
thanks brother,it saved me
@holthuizenoemoet591 Жыл бұрын
Does qgis come with lastools installed? If not how can one acquire it
@shorttutorialsdonequick Жыл бұрын
Hey, no i dont think so. Here is a good tutorial: rapidlasso.com/2013/09/29/how-to-install-lastools-toolbox-in-qgis/ Best regards Kai
@felixotto6006 Жыл бұрын
There is a Plugin
@shorttutorialsdonequick Жыл бұрын
Hey, i made a short video about the installation. kzread.info/dash/bejne/i3aV3MGElK27qps.html Best regards Kai
@ireneli3482 Жыл бұрын
Thank you for the video! It is very helpful! I want to know how to apply this action on a batch file (over 8000 TIFF files)?
@shorttutorialsdonequick Жыл бұрын
Hey, you can try the video kzread.info/dash/bejne/emWDudWvl6bOdto.html in this Video i use r.resamp.stats. You can use this tool as a batch process. Best regards Kai
Пікірлер
I cannot see what yiu are doing
Hey, i dont know why, sometimes youtube changes the resolution of the video to 360p. To change this, click on the little gearwheel at the bottom of the video. I think than you should be able to see everythink. Best regards Kai
Thank you !
straight to the point! thanks 👍
Very helpful!!
Thanks, this helps a lot
Any easy way to Un Apply filters from track? I managed to (prior to this video) add a 'stack' of 5 filters to the track, mostly by accident, that I had used on a previous scene, I was hoping for a one click solution i.e. right click on the hour glass/drip icon ->remove filters. I'll try to remove all 5 individually, or add a new track, delete old track.
Hey, if you devide the track in multiply clips with a filter on the track it will apply to every clip, but if you remove the filter on the track it will removed from every clip. I hope i get your question right. Best regards Kai
i dont have internet connection and my interface file is read only.... it doesnt have an ip how can i fix this, apt-get install gedit doesnt work
i mean my linux doesnt have internet connection
@@arindamoi Hey, i think this is a solution: askubuntu.com/questions/974/how-can-i-install-software-or-packages-without-internet-offline Best regards Kai
Thanks bro. Its very very helpful without wasting any time.
tks
Thanks, guy, I was really frustrated with this topic. Your solution works fine.
Thanks, this video is just what I was looking for, a simple and clear explanation. It's already working for me now👍👍
A suggestion for another tutorial, I don't know if it's possible: Filter the map feature being exported in the Atlas + the layer that is intersecting with it. For example, I have a subdivision map, where I have a layer that represents the indexes and another that represents the lots, I can filter the index using the Atlas, but it would also be interesting if I filtered just the lot in question with a similar function with "overlay_within" or something like that.
Hey markondes, thank you for your suggestion. If i understand you right, i think the solution is in the video after 01:14 ? Is that the right solution ? Best regards Kai
@@shorttutorialsdonequick Now that you say it, it's true! I hadn't understood this part very well and let it go unnoticed, English isn't my main language. Once again, thank you very much and much sucess to you.
@@markondes666 you are welcome, I am pleased that I was able to help you. Best reagrds Kai
Thank you very much, I was racking my brain for hours and couldn't do it at all, you saved me.
Thanks a lot!
H,i thanks for your video. 👍🙏❤ I am trying to use vi to edit a -rw-r--r-- modules.blacklist file in android x86 8.1 r6. This file is in /etc directory which 1rwxrwxrwx with -> /system/etc at the end of the listing. I have tried to use: chmod -R 777 etc. But it does not work. And when I try to edit it with vi it says it is readonly. The android installation has not got sudo, and when i type su before the command i dont see any difference. I appreciate it if you please help me chown or chmod or edit the file using vi. Thanks again 🙏🌹❤️🙏
Hey, uh its a hard question. Maybe you try the app's "SuperSU" and/or "Magisk" to get the admin rights. I hope it will help you. Best reagards Kai
Great stuff!
Lovely! Just what I was looking for!
Very helpful tutorial, thanks for sharing.
Promo-SM 👀
Thank you so much for this tutorial. I was on the verge of doing it manually 😅
Its so fast Sir
laz2txt doesnt write any file- any ideas why?
Is LAStools working correctly ? Did you test it ? Is the layer (file) containing the point data ?
What is the command the resolution is bad
sudo gedit filename
Thank you! this video help me so much.
Thank you! this video help me so much.
Short, sweet and helpful. Thank you! This is how tutorials ought to be.
I am unable to edit ubuntu commands for configuring snort, do you have any suggestions to have read, write and execute permissions
Hey, puh sorry. I dont use snort ... :/ Best regards Kai
Thank You
whats app please BRO 😟
No, sorry. Maybe other peolple can learn from your problem :) so post it here. Best regards Kai
Thank you so much!
bro I need help, I wrote the command sudo apt-get install gedit but it didn’t help, what should I do?
Hey, what error message is displayed?
I did deverything, but my Ubuntu seems to try to run a "lasview" command instead of a "lasview.exe". And i do have only the .exe in my folder! ersion de QGIS : 3.32.3-Lima Révision du code : 67d46100b5 Version de Qt : 5.15.3 Version de Python : 3.10.12 Version de GDAL : 3.4.1 Version de GEOS : 3.10.2-CAPI-1.16.0 Version de Proj : Rel. 8.2.1, January 1st, 2022 Version de PDAL : 2.3.0 (git-version: Release) Algorithme commencé à: 2023-09-22T14:22:20 Démarrage de l'algorithme 'lasview'… Paramètres en entrée: { 'ADDITIONAL_OPTIONS' : '', 'COLORING' : 0, 'GUI' : False, 'INPUT_LASLAZ' : '/home/romain/Documents/carto/moine/LHD_FXX_1006_6543_PTS_C_LAMB93_IGN69_0_1.laz', 'POINTS' : 5000000, 'SIZE' : 0, 'VERBOSE' : True } LAStools command line /usr/bin/wine /home/romain/.local/share/QGIS/QGIS3/profiles/default/LAStools/bin/lasview -v -i "/home/romain/Documents/carto/moine/LHD_FXX_1006_6543_PTS_C_LAMB93_IGN69_0_1.laz" -points 5000000 LAStools console output 007c:fixme:hid:handle_IRP_MN_QUERY_ID Unhandled type 00000005 007c:fixme:hid:handle_IRP_MN_QUERY_ID Unhandled type 00000005 007c:fixme:hid:handle_IRP_MN_QUERY_ID Unhandled type 00000005 007c:fixme:hid:handle_IRP_MN_QUERY_ID Unhandled type 00000005 wine: failed to open "/home/romain/.local/share/QGIS/QGIS3/profiles/default/LAStools/bin/lasview": c0000135 Execution completed in 4.78 secondes Résultats: {'': None} Chargement des couches de résultat Algorithme 'lasview' terminé
You are not showing what the title says - you haven't imported xyz and converted to DEM raster - you've merged existing raster files
Hey, im imported the xyz simply by drag and drop, otherwise you can import xyz files via "Data Soucre Manager" than on "raster" and choose your xyz file. It will be transferred into a DEM Raster. Best regards Kai
@@shorttutorialsdonequick Kai - I apologise - you are absolutely correct-something new learned so thank you
did you record the video with toaster machine? what the heck? look at that poor quality video.. dude
No, with my Grandma's PC :) ... Sometimes its played with 360p, change it to 1080p. It looks ok for me .... :)
@@shorttutorialsdonequick I am working on something. I have two object. One is a wall other is a pipe. But the problem is i need to put that pipe inside of the wall and make inside of the pipe empty. There is no resource about it. Can you explain me or make a video about it please? I will going to lose my mind
@@Kuiperbelttt Hey, i dont think paraview is the right tool for that. Have you tried it with OnShape or FreeCad ? Best regards Kai
@@shorttutorialsdonequick Thank you so much I am gonna check it out!!
what the heck?
Good, but too fast to follow. Have to pause multiplr times
Why is it that SAGA tools are greyed out? and secondly, when running the fill sink tool it displays an error, something like "SAGA version 7.3.0 not officially supported - algorithms may encounter issues" and I have indeed encountered the same problems. Kindly please help. what is the solution? Thank you.
The last official Version of SAGA is 2.0 in 2007. After that the development team decided to make the project open source. Therefore all version bigger than 2.0 are not official supported. Best regards Kai
Hi there, Thank you for sharing these video. I am trying to replicate your tutorial on a geometry I've made using python (with SDF and PyScaffolder libraries) but after I follow your instructions but I can't find the GroupID in the dropdown menu. Any tips on what I am doing wrong ?
Hey, mh do you create a STL File out of python ?
If there are multiple points in a polygon and you want to calculate the mean of an attribute/column for points inside each polygon, how do do that?
Yes, the name of the tool is "Join attributes by location (summary)" I will make a video about it. Best regards Kai
@@shorttutorialsdonequick Thank you found it!
Wow, I think this is the best tutorial I've seen in my life. Short, to the point and simple.
wow it works! Thanks!
thank you
Thank you! Just what I needed to the point!
Works the same “Layer” * 0 + 1
Thank you, yes it will work, but only if you set your NoData Value. If not maybe you endup with an rectangle of one's. Best regard Kai
Hi, I always get an error. Layer not created. Can you tell me why?
Hey, are Spaces or other fancy charakters in the path ? Maybe this causes the error. Best regards Kai
Thank you ! your videos are very helpful! please do more :)
thank you thank you thank youuu
thanks brother,it saved me
Does qgis come with lastools installed? If not how can one acquire it
Hey, no i dont think so. Here is a good tutorial: rapidlasso.com/2013/09/29/how-to-install-lastools-toolbox-in-qgis/ Best regards Kai
There is a Plugin
Hey, i made a short video about the installation. kzread.info/dash/bejne/i3aV3MGElK27qps.html Best regards Kai
Thank you for the video! It is very helpful! I want to know how to apply this action on a batch file (over 8000 TIFF files)?
Hey, you can try the video kzread.info/dash/bejne/emWDudWvl6bOdto.html in this Video i use r.resamp.stats. You can use this tool as a batch process. Best regards Kai