Пікірлер

• 
  @BlackNight1987115 күн бұрын

  Hey my friends, ich have a i7 8700k cpu, rtx 3070 from gigabyte and 32gb RAM. My Display is an peaq 2k. I fly with the same airplane with you and I have 59 fps with frame generation. In the Menü I have under 50 fps. My settings is middle. Can you Help me? I want to buy in the future a Display with 4k. Is the problem, if I have a 2k monitor

• 
  @dugganmartin198316 күн бұрын

  Thanks for the lesson because of you I have just completed my first landing!

• 
  @panhakhmer622416 күн бұрын

  How about ram 8g corei 5-42 general?

• 
  @salvadorcarrillo5113Ай бұрын

  Should i get the latest version or the lne u got

• 
  @Deda8000Ай бұрын

  Hey m8 .this work on rtx 3060 and this is affects and other games ;

• 
  @twamleyАй бұрын

  well that was excellent, cant wait to try it.

• 
  @mariuszk26392 ай бұрын

  Unfortunately, it doesn't work. There is no FPS improvement at all. I own a RTX 3060 12GB card nothing has helped....

• 
  @iDF_goon2 ай бұрын

  you’re making this difficult, i literally don’t know where to go after the github part

• 
  @deepfryme653 ай бұрын

  Can't wait for the next test. The rumor is that the next test is gonna be more centered around stress testing the servers with players in the lobbies and less bots

• 
  @chrismalone32333 ай бұрын

  Perfect! Thank you!

• 
  @MrBJC34 ай бұрын

  i followed the instructions to the letter twice and i still don't see the option for framrate. So sad :(

• 
  @elbapino65314 ай бұрын

  Sir i have an rxt 4060, since your video there is a new version of fram gen file called universal; in my pc, do i have to just drag and drop the new universal files in the content of msfs or install first old version, disable nvidia settings and then install universal version one ? i a little confuse. Can you help me ?

• 
  @OzzySafa4 ай бұрын

  You have a 40 series card I wouldn’t do anything since it works perfectly with frame gen without doing anything with the files

• 
  @elbapino65314 ай бұрын

  @@OzzySafa thks sir

• 
  @colindegreat4 ай бұрын

  my render latency or average pc latency was always at 15-20ms now its at 140ms using this and hardware scheduelling on, what could be the issue? I get the FPS increase but I noticed latency gone terible, is this bad?

• 
  @xyrxFR4 ай бұрын

  because it is technically not supported it might be glitchy from game to game

• 
  @sunbeauty97824 ай бұрын

  This was so useful!

• 
  @1956guillermo5 ай бұрын

  Please help, what am I doing wrong? My files for MSFS are in Xbox Games. I dropped the 2 files in the content folder of Microsoft Flight Simulator. I enabled the Hardware=accelerated GPU scheduling. What am I missing?

• 
  @1956guillermo5 ай бұрын

  Solved!! I had to change to Directx Version 12

• 
  @dank63725 ай бұрын

  i7-9700K + 3070ti. Got about 80-105 fps in heavy airports where it used to be 40-50 on the same settings. Unbelievable. Some flickering and ghosting is present but mainly in sim menus and loading screens. Vsync is off (G-Sync enabled), HAGS on, TAA antialiasing (which is much sharper than DLSS). My only question: is this really safe for GPU?

• 
  @OzzySafa5 ай бұрын

  Well so far my temps have been fine so far but can’t speak for anyone else. At your own risk I guess

• 
  @captaindreadable64485 ай бұрын

  got it working, but having a huge frame drop not an increase. 3080ti using the latest build from nexus mods which doesnt require reg edit and still its jsut tearing crazy and not working.

• 
  @SiikkIndividuaL5 ай бұрын

  Just wait til MFS 2024 comes out, be so much better optimised

• 
  @OzzySafa5 ай бұрын

  We can only hope

• 
  @MaximosTheGamer5 ай бұрын

  does it work with gtx 1650?

• 
  @OzzySafa5 ай бұрын

  Just RTX series

• 
  @_Vertixx_5 ай бұрын

  Hey man don’t know if your going to respond but I don’t get the pop up to say that dlss is loaded before launching you know why? This also doesn’t affect my frames what so ever they stay the same?

• 
  @OzzySafa5 ай бұрын

  I don’t understand what you mean by dlss loaded

• 
  @_Vertixx_5 ай бұрын

  The small white little pop up box you get when loading into msfs 2020

• 
  @OzzySafa5 ай бұрын

  @@_Vertixx_ can you see the frame generation option and what gpu do you have ?

• 
  @_Vertixx_5 ай бұрын

  @@OzzySafaif by the farm generation option you meaning the choice between dlss and fsr then yes there is I have a Rex 3080

• 
  @OzzySafa5 ай бұрын

  @@_Vertixx_ by frame generation I mean the option where it says frame generation: on / off under your DLSS settings

• 
  @SkynetDrone126 ай бұрын

  Mate I really appreciate this, you did all the hard work and this made the difference between playing dcs and not playing as getting the VR out and setup and using it is always hard. I have not played since my daughter was born as an 18 month old running around is not easy to play with VR. Your a legend

• 
  @tugifb_6 ай бұрын

  I really did everything as explained in the video. But the DLLS Frame Generation does not appear in my graphics settings. I have a 3060Ti. Has anyone else experienced this?

• 
  @WeWiZHD5 ай бұрын

  same need some support on this

• 
  @captaindreadable64485 ай бұрын

  make sure hardware acceleration is on in windows settings and restart

• 
  @andrearaujo796 ай бұрын

  Very nice! For my 3080ti; More and smoother fps, same VRAM usage, but less GPU usage and temperatures. Definitely a game changer! Until NVIDIA blocks it in future drivers! 😊

• 
  @emailrobertbm6 ай бұрын

  I did this but when switched to DirectX12 my FBW a320 freezes after flying for 10 minutes or so. My PMDG737 works fine with this setting.

• 
  @nobody-ef8rs6 ай бұрын

  ı did everythink you did but not working

• 
  @julienleconte80096 ай бұрын

  I've tried but nothing work for me. lastest drivers, VSYNC off on MSFS and NCP, Frame Generator ON, DX12, tested on DLSS, TAA, None, AMD ... nothing works. No more FPS but lot of screen tearing. Useless for me (Running on 3 screens on QHD with 3070Ti / AMD 5900X / 32GB / SSD NVME)

• 
  @OzzySafa6 ай бұрын

  Did you restart your system after enabling hags

• 
  @julienleconte80096 ай бұрын

  @@OzzySafa thanks for your reply ! I can see frame generation working now but too much screen tearing and not working with FENIX A320 (computer says that the card is overclocked and finally freeze

• 
  @mlontz16 ай бұрын

  Why does my MSFS not give me the option for DX12 beta? Do I need to have it for frame gen? 😢

• 
  @Level10Productions6 ай бұрын

  Does the FSR3 mod do anything good for the 4090 card? If so, by how much??

• 
  @OzzySafa6 ай бұрын

  No but you can try it. Let me know what you get before and after

• 
  @jrjackson39466 ай бұрын

  Dizzy just watching this and your glass cockpit is basically useless with all that flickering and blurriness. Some tweaking could be made but someone getting over 60fps on their system by default no need for frame gen.

• 
  @user-qh4sm1ud6j6 ай бұрын

  Sir my fps not higher than 30 also with frame generation and i have rtx 2070 would you please help me, tnx

• 
  @OzzySafa6 ай бұрын

  You need a better cpu for best use of frame generation it works better when around 50 fps. Try lowering your in game settings

• 
  @Photoshopmanipulator6 ай бұрын

  if you are getting 70 fps with frame gen off. that 100 fps does not look any better

• 
  @AlceuBap6 ай бұрын

  Would it work with VR?

• 
  @andrearaujo796 ай бұрын

  Now Nvidia has something to block in future driver versions 😉

• 
  @OzzySafa6 ай бұрын

  If they do we can always roll back drivers ;)

• 
  @jamesthe737expert6 ай бұрын

  I don’t have merge

• 
  @OzzySafa6 ай бұрын

  Does it let you drag and drop the files ?

• 
  @FinlandGuy7476 ай бұрын

  I tried it. It almost worked but whem i move my view the whole screen flickers.

• 
  @OzzySafa6 ай бұрын

  How about inside of the cockpit

• 
  @FinlandGuy7476 ай бұрын

  @@OzzySafa Especially there

• 
  @OzzySafa6 ай бұрын

  @@FinlandGuy747 did you turn v sync off in the sim and have it enabled in Nvidia control panel

• 
  @FinlandGuy7476 ай бұрын

  @@OzzySafa Yup

• 
  @OzzySafa6 ай бұрын

  @@FinlandGuy747 what’s your dlss settings ? And also what resolution are you playing at

• 
  @FinlandGuy7476 ай бұрын

  Magic. I just hope this doesn't effect my pc in long term and end up burning my whole pc.

• 
  @OzzySafa6 ай бұрын

  It will melt and burn all the way to hell🔥 I havent had a problem with my temps I haven’t experienced any crashes. It’s entirely your own risk ;)

• 
  @vukjeremic54876 ай бұрын

  Performance looks much better, but is the quality severely decreased?

• 
  @OzzySafa6 ай бұрын

  I can’t tell the difference between FG on and Off with dlss at quality. Still looks clear to me

• 
  @chrisgard40766 ай бұрын

  still cant get 50% improvement

• 
  @OzzySafa6 ай бұрын

  What’s your cpu and gpu?

• 
  @henryho98486 ай бұрын

  i have a 4070ti and applied this Frame Gen addon, but the FPS did not have a significant change, I'm not sure what happen, any idea?

• 
  @OzzySafa6 ай бұрын

  Because the 4000 series has frame gen already enabled in the sim. There’s no need to drag and drop the files. Go back and remove them. The whole point of the video is for people that have RTX gpu that are for 2000 - 3000 series. Frame gen is an exclusive feature for the 4000 series. This video is just a workaround for those on lower models

• 
  @henryho98486 ай бұрын

  How about update the nvngx_dlss to 3.5 ?@@OzzySafa

• 
  @OzzySafa6 ай бұрын

  @@henryho9848 yes this may help you improve the performance

• 
  @henryho98486 ай бұрын

  Thank you for your reply. I have tired enable DLSS with Quinty setting, the FPS is just 30-50 FPS.........@@OzzySafa

• 
  @stuartholt94686 ай бұрын

  What are the rest of your graphics settings? Yes, your FPS is high (and gets higher) but the visual quality appears very poor in this video. Each to their own I guess, but I prefer getting the best visual settings and happy with 30 FPS (on my 3080)

• 
  @andrearaujo796 ай бұрын

  God bless Nvidia! What about GPU usage/temperature? what's the normal values using this? The same as in a 40?

• 
  @OzzySafa6 ай бұрын

  My gpu vram actually went down and my temps were fine

• 
  @jorisbonson3866 ай бұрын

  Misleading title though...

• 
  @OzzySafa6 ай бұрын

  Why is it misleading? I actually gained 55% performance increase. Do you know how to calculate percentage increases ?

• 
  @jorisbonson3866 ай бұрын

  @@OzzySafaErm, it's misleading because you state DLSS frame generation in the title but it's actually FSR 3 🤦‍♂

• 
  @OzzySafa6 ай бұрын

  @@jorisbonson386 Well I do mention that in the video - lured you in didn't I :P welcome to KZread

• 
  @jorisbonson3866 ай бұрын

  @@OzzySafa lol whatever buddy - you didn't need to specify DLSS in the title to 'lure people in', just state FSR3 FG 😉 Otherwise some people will automatically assume 4000 series only before even getting to the 'all RTX cards' part of the title...

• 
  @OzzySafa6 ай бұрын

  @@jorisbonson386 frame generation is an exclusive feature to the 4000 series. People with 4000 series cards would not need to be bothered about FSR3

• 
  @BlarryOfficial6 ай бұрын

  Some settings to consider changing when getting crashes and/or screen tearing: - in NCP, disable custom refresh rate - in game, try out different anti aliasing methods. On my 2070S, both DLSS and TAA crashed the sim, yet AMD FSR2 worked fine, ironically. That's not really a deal breaker, since DLSS is of questionable usefulness on any airplane with glass cockpit avionics, to say the least.

• 
  @js_filming77016 ай бұрын

  I cannot get this to work (with the versions 50 to 80). With version 50 the error screen appeares (so its supposed to be inmstalled the correct way), but the switch in the sim is still not showing up. Newest NVIDIA driver for my RTX2070 Super.

• 
  @OzzySafa6 ай бұрын

  Try 50 and if that doesn’t work make sure to enable hags and restart the pc

• 
  @js_filming77016 ай бұрын

  HAGS = VSync? If so it is enabled. Ill try, thanks.@@OzzySafa

• 
  @OzzySafa6 ай бұрын

  @@js_filming7701 please watch 08:19

• 
  @js_filming77016 ай бұрын

  Turned on as well. With version 50 i am getting the error screen but still no option to turn it on in the sim@@OzzySafa

• 
  @OzzySafa6 ай бұрын

  @@js_filming7701 you restarted the pc and the sim ? Is DLSS on?

• 
  @wayne61816 ай бұрын

  Hi all, has anyone had success with this in VR? I have installed and can get it all running as it is supposed to but it kills FPS in VR. I'm on a 3080ti and using Open XR toolkit with my Reverb G1. I can get a super crisp image but it has a massive frame hit so wondering if there is a VR tut on this or does it really only work when using a monitor?

• 
  @xyrxFR4 ай бұрын

  will try this with my quest 2 today

• 
  @FunFunFun88886 ай бұрын

  Time to dump your Nvidia RTX 4090 Super for a RX 7900 XTX. Set take-off flaps!!

• 
  @jorisbonson3866 ай бұрын

  Can't wait to use this in VR with my valve index and 4090!! 😃

• 
  @TBMPilot7366 ай бұрын

  Nice! Could you give me a feedback if it works? Thanks 🙏

• 
  @Andy006-tj7ts6 ай бұрын

  Try using the ingame fps monitor and you will see you are back to normal frame rate.

• 
  @OzzySafa6 ай бұрын

  Ofcourse the in game fps counter will only show you the frame rate of the real frames and not the generated frames. The ai generated frames are counted using external fps counters

• 
  @speedbrakes3656 ай бұрын

  What is your monitor refresh rate? Mine is 60 hertz and with frame generator goes to 60

• 
  @izzyahmed6 ай бұрын

  Thank you for sharing! But mine is still greyed out, help please.

• 
  @OzzySafa6 ай бұрын

  Follow exactly everything in the same order. Make sure hags is enabled and restart your pc

• 
  @izzyahmed6 ай бұрын

  @@OzzySafaHello, so it looked like it worked now but I am getting only 35 fps. I have. Rtx 4070 ti. Help please

• 
  @OzzySafa6 ай бұрын

  @@izzyahmed you have a 4000 series card just put the frame generation on like you normally would. You’ll be better off. No need to drag and drop the files. It’s only for older RTX cards. Also the in game fps counter only shows you the real frames and not the generated frames. You need to use an external fps counter to see the difference.