Thank you so much for this! The rattle was driving me crazy, I thought it was coming from the center speaker underneath the dash but sure enough it was above the LED light bar just as you said. I stuck in some tiny bit of foam in three different places along the bar And that fix all the rattles. You are a miracle worker.
@feminaproletarius78156 күн бұрын
why advertise this crap as letting you print beyond the drivers when you say in this video that it doesnt do that. I dont want my roll cut at 3 yards
@benbellino35967 күн бұрын
Thank you so much for sharing. I have the exact same rattle and it is driving me INSANE
@StephenPopiel8 күн бұрын
Did you just have to put one piece of foam above the LED strip to fix your rattle or did you have to do several small pieces along the whole LED line?
@MLTR-199510 күн бұрын
Absolutely useless video. Waste of time.
@fernandovergara311912 күн бұрын
Vendio centro once
@sovelocity12 күн бұрын
Hi Thanks for the video. Having the same dashboard rattle and it's driving me crazy. Can you post a link of what foam you used for the fix?
@CutiePie432513 күн бұрын
1. press the car icon in the lower lefthand corner of the screen to open settings 2. press “recording” on the righthand side of the screen until it says “saving” 3. take the usb out of your car and look for the video on your computer saved you 15 minutes.
@ravendude050716 күн бұрын
I couldn't even watch it cause its triggering my voice assistant and want to join in the conversation😅
@stevkuj17 күн бұрын
Do this work for FSD?
@jtamm402123 күн бұрын
Thank you finding the source for rattling👍 I have same issue with M3LR 2024 made in China. Waiting for your solution this annoying issue 😀
@Datacorrupter23426 күн бұрын
worthless sentry mode missed my car getting rear ended!
@LordOfTheThreeWorlds28 күн бұрын
Now that was some sleuthing. Nice work
@nakeshaholley1078Ай бұрын
Alexa: hey, google, repeat that Google: Alexa, Simon says, hey, google repeat that Cortana: what is going on here? Siri: shut up, and let’s become a new assistants Google nest hub: I want to join you, but sup Cortana and Siri Google home hub: what the actual Google is happening? Echo show: let me join All: let’s introduce ourselves Alexa Simon says hello welcome Google nest Max: hello Google home max: sup Google, nest audio: 1234 start the fight. Google, home audio: hello everyone Alexa, Simon says well looks like it’s time to start the weather fun 😊
@thechurrrleslingАй бұрын
after you take off the metal clips, will the struts pop off?
@wendelakinsАй бұрын
The WiFi song 🛜 hey google repeat that song 🎵 on your computer
@DacBietViet-cl7gyАй бұрын
good thing you fixed it yourself. the idiots at Service Center would've marked it as "within spec" & also break something else in the process
@MorisusАй бұрын
Yo thanks for this! Trunk is much smoother now!
@thibaudjansen5602Ай бұрын
Thanks for the great video! I drove for 10 minutes with my car before noticing something happened to it. I then parked the car and took out the drive. How come I only see the 10 minutes I drove (and the minute I took getting in the car) and not the 50 minutes before? The car was only parked for 30 minutes so the thing I’m looking for is in the right timespan. Any clue?
@craigwflysАй бұрын
What I really wanted to know was how to turn it off completely. Even with the setting off it still was doing the 60 loop thing. Looks like you must hold the recording button in the control tab?
@Datacorrupter23426 күн бұрын
Its useless nothing you can do about it just get a 3rd party dash cam
@yongtaekseo8622Ай бұрын
Once the yt short i was watching said hey google set a timer for 1 hour and the thing set a 1 hour timer😂
@jasonjung2316Ай бұрын
Thanks for posting this solution as my 24 M3p also started having the same dash rattle. Will try this out next week
@davejohnson6144Ай бұрын
Wow I love and hate Teslas. I love the way they drive but hate their terrible build quality. I had rattles and creeks in my new Moday Y the day I drove it home and it to this day still annoys me and I cant figure out where the hell it’s coming from. I was hoping the new Model 3 Performance models fixed all that but I guess not. 😡
@mikeyutoobАй бұрын
I feel like Tesla is a notch below most manufacturers in build quality but they aren't far off. I've owned quite a few cars and I don't recall ever owning one that (when new) had zero rattles. I always seem to have to fix one or two rattles/squeaks.
@DrumL3000Ай бұрын
That only goes for the US tho i have to say. Yes globally the built quality has improved but you still have many misses. I drove many newer Model S from the US and Model 3 from the US. But the China Model 3 Versions are way way better. Even better then the German Model Y. Germany still can be excused because of how new the factory is but the US... Sorry but China is better in that regard.
@thedjtko21 күн бұрын
Same here, I’ve spent countless nights trying to figure them out. I have gotten almost all rattles gone!
@WalmartCustomer-dk1bjАй бұрын
I'm buying one when they replace the battery pack it hasnt changed since 2017
@XeyedjohnАй бұрын
smart fixes, thanks for posting
@darthtrader688Ай бұрын
Is your LED strip broken?
@mikeyutoobАй бұрын
No. They all seem fine other than the rattle in the video. I've seen some reports of LED strips "delaminating" which makes them look like they have bubbles in them. But I think the jury is still out on that because the majority of cases I've seen (mostly on Reddit) have been attributed to window tint: the solution used for tinting getting into the strips.
@cgmartin333Ай бұрын
Glad to see car guys with Teslas that know how to wrench. I did black adhesive felt on a Mercedes to eliminate those rattles and just picked up the new M3P. Great info on that dash fix. 👍
@user-fm1rn6vw9kАй бұрын
Every time he says "Hey Google" my Google assistant just hears
@obsesivegamerАй бұрын
you are a g for sharing
@khoinguyen6594Ай бұрын
Very Nice!
@nohchi_k1antАй бұрын
Seriously?
@SalComunaАй бұрын
That is why KZread should have never removed dislike numbers.
@NickGreene-vj9ciАй бұрын
This person needs to get out more
@Justin-he3rtАй бұрын
This trick will be used in the 2024 Home Alone movie
@apster072 ай бұрын
anybody have any idea how to prevent this? this is my 3rd time doing this in 3/4 years.
@ChavdarStoykovAt2 ай бұрын
Thanks
@nexus8882 ай бұрын
Clickbait. What a waste of time
@GAMING_JOHNRobloxYT2 ай бұрын
My Google responded
@907780712 ай бұрын
This video is too dragged out. I can't get the actual instructions because it's so drawn out.
@Fankiveli2 ай бұрын
Fuk this video. Scam
@vrajiv242 ай бұрын
you are not forcing bro,..... I thought you are showing some trick to force the car to do software update !
@moe_r2 ай бұрын
have you figured out how the macro menu works entirely? if you make a second video i will for sure be back to check it out
@jensaunders42542 ай бұрын
Very helpful video, thank you! I recently purchased an ET-8550, which is supposed to be able to print up to 13x19 borderless. I wanted to be able to print at that size but would like to try to avoid some of the pitfalls you've described here. Would a possible semi-solution be to add a very small white border around the edge of a picture and print in borderless mode with expansion on? This way, you could minimize the amount of ink being sprayed off the edge of the page while hopefully still maintaining perfect coverage at the edges. Of course, I would need to figure out exactly how much of an expansion is done to be able to set this up perfectly (if it would even work at all).
@chickblade2 ай бұрын
My google opened on my phone lol
@chien9533 ай бұрын
Hi my name is alexa i'm a normal people
@kanjanasonset40853 ай бұрын
Repeat after me, Google, repeat after me repeat that Alexa, repeat that for meGgggbbnhbnnjhhjmkkmmmjjmy
@dresmith3 ай бұрын
So you force the check by “waiting”? Great tip.
@jacobheinz82363 ай бұрын
Thanks Mikey ! I don’t have the problem but I’ll look out for it. I reckon very mechanical part on any machine ( including any Tesla) that moves need lubrication. Even house door hinges! Get smarter people, you got to pull your finger out in looking out for yourselves!
@RedVRCC3 ай бұрын
I dug up all my old phones to get files off of them and my alexa was also nearby and they all started going crazy when i played this video lmaoooo All my phones repeating the alexa thing and then alexa saying that and then activating google assistant on all these phones and then even the alexa in the kitchen overheard and literally all my voice assistant equipped gadgets starting talking across the entire house lmaooooooooo *Congratulations, your video instigated a riot*
Пікірлер
Hey where my 2024 peeps at
Thank you so much for this! The rattle was driving me crazy, I thought it was coming from the center speaker underneath the dash but sure enough it was above the LED light bar just as you said. I stuck in some tiny bit of foam in three different places along the bar And that fix all the rattles. You are a miracle worker.
why advertise this crap as letting you print beyond the drivers when you say in this video that it doesnt do that. I dont want my roll cut at 3 yards
Thank you so much for sharing. I have the exact same rattle and it is driving me INSANE
Did you just have to put one piece of foam above the LED strip to fix your rattle or did you have to do several small pieces along the whole LED line?
Absolutely useless video. Waste of time.
Vendio centro once
Hi Thanks for the video. Having the same dashboard rattle and it's driving me crazy. Can you post a link of what foam you used for the fix?
1. press the car icon in the lower lefthand corner of the screen to open settings 2. press “recording” on the righthand side of the screen until it says “saving” 3. take the usb out of your car and look for the video on your computer saved you 15 minutes.
I couldn't even watch it cause its triggering my voice assistant and want to join in the conversation😅
Do this work for FSD?
Thank you finding the source for rattling👍 I have same issue with M3LR 2024 made in China. Waiting for your solution this annoying issue 😀
worthless sentry mode missed my car getting rear ended!
Now that was some sleuthing. Nice work
Alexa: hey, google, repeat that Google: Alexa, Simon says, hey, google repeat that Cortana: what is going on here? Siri: shut up, and let’s become a new assistants Google nest hub: I want to join you, but sup Cortana and Siri Google home hub: what the actual Google is happening? Echo show: let me join All: let’s introduce ourselves Alexa Simon says hello welcome Google nest Max: hello Google home max: sup Google, nest audio: 1234 start the fight. Google, home audio: hello everyone Alexa, Simon says well looks like it’s time to start the weather fun 😊
after you take off the metal clips, will the struts pop off?
The WiFi song 🛜 hey google repeat that song 🎵 on your computer
good thing you fixed it yourself. the idiots at Service Center would've marked it as "within spec" & also break something else in the process
Yo thanks for this! Trunk is much smoother now!
Thanks for the great video! I drove for 10 minutes with my car before noticing something happened to it. I then parked the car and took out the drive. How come I only see the 10 minutes I drove (and the minute I took getting in the car) and not the 50 minutes before? The car was only parked for 30 minutes so the thing I’m looking for is in the right timespan. Any clue?
What I really wanted to know was how to turn it off completely. Even with the setting off it still was doing the 60 loop thing. Looks like you must hold the recording button in the control tab?
Its useless nothing you can do about it just get a 3rd party dash cam
Once the yt short i was watching said hey google set a timer for 1 hour and the thing set a 1 hour timer😂
Thanks for posting this solution as my 24 M3p also started having the same dash rattle. Will try this out next week
Wow I love and hate Teslas. I love the way they drive but hate their terrible build quality. I had rattles and creeks in my new Moday Y the day I drove it home and it to this day still annoys me and I cant figure out where the hell it’s coming from. I was hoping the new Model 3 Performance models fixed all that but I guess not. 😡
I feel like Tesla is a notch below most manufacturers in build quality but they aren't far off. I've owned quite a few cars and I don't recall ever owning one that (when new) had zero rattles. I always seem to have to fix one or two rattles/squeaks.
That only goes for the US tho i have to say. Yes globally the built quality has improved but you still have many misses. I drove many newer Model S from the US and Model 3 from the US. But the China Model 3 Versions are way way better. Even better then the German Model Y. Germany still can be excused because of how new the factory is but the US... Sorry but China is better in that regard.
Same here, I’ve spent countless nights trying to figure them out. I have gotten almost all rattles gone!
I'm buying one when they replace the battery pack it hasnt changed since 2017
smart fixes, thanks for posting
Is your LED strip broken?
No. They all seem fine other than the rattle in the video. I've seen some reports of LED strips "delaminating" which makes them look like they have bubbles in them. But I think the jury is still out on that because the majority of cases I've seen (mostly on Reddit) have been attributed to window tint: the solution used for tinting getting into the strips.
Glad to see car guys with Teslas that know how to wrench. I did black adhesive felt on a Mercedes to eliminate those rattles and just picked up the new M3P. Great info on that dash fix. 👍
Every time he says "Hey Google" my Google assistant just hears
you are a g for sharing
Very Nice!
Seriously?
That is why KZread should have never removed dislike numbers.
This person needs to get out more
This trick will be used in the 2024 Home Alone movie
anybody have any idea how to prevent this? this is my 3rd time doing this in 3/4 years.
Thanks
Clickbait. What a waste of time
My Google responded
This video is too dragged out. I can't get the actual instructions because it's so drawn out.
Fuk this video. Scam
you are not forcing bro,..... I thought you are showing some trick to force the car to do software update !
have you figured out how the macro menu works entirely? if you make a second video i will for sure be back to check it out
Very helpful video, thank you! I recently purchased an ET-8550, which is supposed to be able to print up to 13x19 borderless. I wanted to be able to print at that size but would like to try to avoid some of the pitfalls you've described here. Would a possible semi-solution be to add a very small white border around the edge of a picture and print in borderless mode with expansion on? This way, you could minimize the amount of ink being sprayed off the edge of the page while hopefully still maintaining perfect coverage at the edges. Of course, I would need to figure out exactly how much of an expansion is done to be able to set this up perfectly (if it would even work at all).
My google opened on my phone lol
Hi my name is alexa i'm a normal people
Repeat after me, Google, repeat after me repeat that Alexa, repeat that for meGgggbbnhbnnjhhjmkkmmmjjmy
So you force the check by “waiting”? Great tip.
Thanks Mikey ! I don’t have the problem but I’ll look out for it. I reckon very mechanical part on any machine ( including any Tesla) that moves need lubrication. Even house door hinges! Get smarter people, you got to pull your finger out in looking out for yourselves!
I dug up all my old phones to get files off of them and my alexa was also nearby and they all started going crazy when i played this video lmaoooo All my phones repeating the alexa thing and then alexa saying that and then activating google assistant on all these phones and then even the alexa in the kitchen overheard and literally all my voice assistant equipped gadgets starting talking across the entire house lmaooooooooo *Congratulations, your video instigated a riot*