A charitable channel where I buy bikes to save them, sell them on at reasonable prices and use the profits for many different charitable causes. My favourite is fixing and servicing peoples bikes for them for free.
It's not about making money it's about saving bikes and helping people out.
Instagram...... Motorcycle rescuer
Facebook group....... Motorcycle rescuer
Пікірлер
😊😊😊
I would like to thank the channel members...... Will boypr Oldskools cool Hairy Bastid Mattys on the move Glowskulls 100 John Weller Tom Milner Tony Taylor Jake Forbes Pickwizard Stevie Terence Jarrett Aydin Eshref Derek Dingwall Stuart John's Daniel Barnes
Thanks, Great video! Have tried to pinch the little bits of info can but still have question or 2! I have a Bullit Hero 125 (EFI) and want to switch out for a carb... with all the extra electrical wires that went to the original throttle body, do you just tie em up an forget about em?!
Yes that's exactly what I did. They will throw a light on the dash but these lights aren't checked for mot. I even took the bulb out. The bike ran so much better on the carb. I'm curious though, why are you switching to carb? Also how will you get your fuel flow?
About £20
Sounds about right
Lol
You are a Gentleman Charlie you have a good heart.
Cheers Lee. Appreciate the kind words mate
👍✌️❤ all good buddy. Life gets it's ups n downs. Just be yourself you have a good heart. 👍
Cheers Springy. Hope your well mate
Always loved the look of these bikes. I like the K light more than the Superlight im not a fan of the huge mud guards. The factory tyres on these where not good i dont know if they changed them or not? But they had poor grip in the wet. I'm guessing they where a really hard rubber.
Yes the rear is a better one and I just put a Michelin on the front. So all good. It's a great bike this one. Cheers Lee.
hey Bro where's RabJab you could do with another pair of hands.
Someone to keep the chair warm lol. He's working at the moment. I see him about though
Nice bike Charlie,,,should fly the mot
Already did and deposit taken. Someone said its not worth a w4nk lol. But I'm not sure what a w4nk cost now days haaaaaaaaa
muppet u waste 15minutes of my life to not even se if u got the bike goin , big no no ,, not funny , and i wont be watchin any more u stupid videos
Watch the other vids to see the fix. Also watch some English writing vids to help you with your spelling.
Break out the Paco Robanne Charlie lol. Hop it goes well for you both.
Hahaha old spice lol
My true scent does it all. Grease and petrol
£1250 😂😂😂 aint worth a w4nk
Not worth a w4nk ? The immaturity within you means your probably still at that stage you have to have a w4nk, with a forehead like yours and the fact your negative against someone else’s positivity, tells me you haven’t had a misses in about 12 stone a hairline and 11 years, your a troll.
What's a wank worth?
It did make me chuckle when you forgot to put the ht lead back on, any recommendations for a new 125cc 2.5k to 3k max?. Love the channel n keep up the videos. Regards gb patriot.
Hi GB, sadly prices are crazy at the moment on bikes. Personally I would be getting the best second hand ktm duke or any yamaha or Honda etc
🤔😊👍
Cheers Derek
Leaving the spark plug lead off rookie errors I do it all the time 😂 I’d do the fork seals not to hard, I did some on my old Honda xl125 the other week and I now needs to do them on my Honda xr125 doesn’t take to long and it would get your sale bike tip top and a video on it to , go on do them 👍
They didn't even come up as an advisory though. I gave them a clean using a seal buddy and they will be find for now. And yeh I do stupid things like that all the time with the spark lol
Diamond in the rough lol.... poor maintenance or lack of experience to service/adjust/repair. Easy quick flip & nicely diagnosed Charlie- aka the bike whisperer 😅😅
Lol cheers Daniel
Stick some gaitors on the forks, they can't remove them for MOT test.
They are only lightly misting at this stage. Didn't even get a minor on mot. But will need changing for next mot I'm sure.
What are the two reservoirs on each side of the front of the frame for?
They are brake fluid.
Hi Charlie. Sounds a lot sweeter than the rotavator sounding bike it was initially 😅 Great job Charlie 😀👍👍
I got lucky, was a easy enough fix.
Wowww sounds soo much better! Nice job
Was so weird, the washer wasn't crushed at all. Someone must have messed with it
Really good video
Cheers Georgie
I would like to thank the channel members...... Will boypr Oldskools cool Hairy Bastid Mattys on the move Glowskulls 100 John Weller Tom Milner Tony Taylor Jake Forbes Pickwizard Stevie Terence Jarrett Aydin Eshref Derek Dingwall Stuart John's Daniel Barnes
I've not bothered reading the comments but if you considr that the back cylinder is running hotter due to air flow, winnd the mixture screw back by half a turn 1.5 turns that should do the job! Happy biking!
That's great advice. Cheers Barry
This will be fun to watch
I can't remember what it was?
nice looking bike you can do it ❤
Will be nice I think. Drives beautifully
I would like to thank the channel members...... Will boypr Oldskools cool Hairy Bastid Mattys on the move Glowskulls 100 John Weller Tom Milner Tony Taylor Jake Forbes Pickwizard Stevie Terence Jarrett Aydin Eshref Derek Dingwall Stuart John's Daniel Barnes
Hopefully another nice quick turnaround on the Keeway Charlie.
Fingers crossed glow. Cheers mate
Nice to see another project Charlie, I don’t do any filming but the amount I’ve learnt from you on this channel has helped me massively. Keep up the good work mate. The Porsche is looking nice too.
Cheers biker. I've learned over the years through trial and error mate. When you do a few it will start to become second nature.
Please film the kTM valve adjust/check..
Yes I'll film it when I get round to it. Full service definitely needed this summer.
@@motorcyclerescuer legend!
Sorry to hear of your recent loss Charlie. Keeway k.lite looks just under maintained and charges of garages put them off investing....only a hunch. Hopefully a quick turn around.
Thanks Daniel. Appreciate the kind words. It's a good runner mate.
It's a runner though Charlie👍
Runs great Derek. Cheers mate
Another nice project for you Charlie 😀 shouldn't be to hard to get it up to scratch either 👍😀😃
No so far it seems very straightforward. Possibly needs a front tyre. Small service. That's about it.
i do have a question my mate just starting deliveries on a 125 cc scooter chinese how often would you change the oil i said once a month need your advice ❤
Once a year if it's good oil. Once every 6 months if it's doing alot of miles.
nice one mate tyres leave for them they know and make it look easy engines your job ❤
Lol agreed
Having the same issue with my SYM..thanks , I have a better idea of what's going on.
No worries, good luck with it
Got the switch off and the little register pin is broken off. New switch on the way. Thanks again
@bobneilly1295 you are better of judt connecting the 2 wires that bring spark back and taping them off. The switches regularly go wrong
I have just brought one of these and I don't know how the pipes are run from carburettor manifold
Normally one goes to the fuel tap for suction?
@@motorcyclerescuer is there away I could show you a picture please because I never seen this before
If you join the motorcycle rescuer and friends Facebook group you can post pics and get advice from a bunch of us
@@motorcyclerescuer can't seem to find you
facebook.com/share/hEQktsqjbyWyNpSm/
Never leave the valve in when sealing the bead, 😊
This valve was so hard to get the core out. Had to put a new valve in. Cheers Martyn
keep posting more
Cheers buddy
🏍👍👍👍
Cheers mate
🏍👍👍👍
Cheers Stephen
Hi Charlie 😀 great video as always 👍 Great to see you've got an mot for her. Statement, "There aren't any mechanics in your area", that's because YOU are the mechanic in your area Charlie 🤣
Lol, I meant real on the books working mechanics. But thank you for your confidence in me 😅
The only reason I change my motorbike tyres or scooter ones is that the garage over the way lets me use their tyre machine. But if its tubed 9 times out of 10 it goes to the tyre fitter which only charges £8 and saves me puncturing it.😊
Exactly. I always prefer to pay. For ease. Cheers Glow
I feel for you Charlie . I share your hate of fitting tyres . Seldom had any luck with them . I don't do my own now . I just take them to the local bike shop . Not worth the hassle . If they are spoked wheels I always seemed to catch the tube with the levers and cause a leak . Hope you get it sorted . Nice bike that Lexmoto . Sounds good too .
I can't stand doing them either. I did the hard part then took it to the shop to get the bead to seat.
spray a bit of brake cleaner in the tyre, and light it, should pop the bead in nicely.
I've never done that before. I've seen clips of it.
Braver man than me...hate changing a tyre !!
It was easy enough although I could not get the bead to seat and I tried every trick in the book. Had the maitland guys do it in the end. Hope your well Daniel
I would like to thank the channel members...... Will boypr Oldskools cool Hairy Bastid Mattys on the move Glowskulls 100 John Weller Tom Milner Tony Taylor Jake Forbes Pickwizard Stevie Terence Jarrett Aydin Eshref Derek Dingwall Stuart John's Daniel Barnes
El abanico para donde tiene ke echar el aigre si me pueden contestar porfa
I'm afraid I don't understand
hey man whats exhaust is that on the duke?
It's a full scorpion system I believe. The scorpion and the black widow sound pretty much the same