Пікірлер

• 
  @1969Bossman42911 күн бұрын

  Good job and great video...Thanks for sharing! I am repairing two skylights on our 34ft Starcraft Black Pearl edition that were broken from hail damage. The Maxxfan lid was an easy screw-on installation, but these skylights are more time-consuming. Appreciate you taking the time to make this video and we are in Kentucky, too!

• 
  @mariobisson146319 күн бұрын

  Where do I can buy a plastic scraper?

• 
  @LonghaulLifesavers18 күн бұрын

  Any home improvement store or Walmart will have plastic scrapers

• 
  @matthewc.westover2522Ай бұрын

  Just came across the Ranch hand YT video that you posted 3 years ago. How has the powder coat held up ? Getting ready to purchase the FBD195BLRC for my 2022 Ram dually. Thanks

• 
  @LonghaulLifesaversАй бұрын

  I haven’t had the truck for a year but before I traded it in, there was no issues

• 
  @ClarkeMotorsOCАй бұрын

  So the lines still had some original transmission fluid in them, did you end up having any issues mixing the Lucas Hydraulic & Transmission fluid with it?

• 
  @LonghaulLifesaversАй бұрын

  Yes the only way to get it all out would be to disconnect all the hydraulic lines at every jack and do a flush.

• 
  @rcaldridge9230Ай бұрын

  Mine has a canopy over the top of the slide. How do I address that to replace the seal?

• 
  @sean808080Ай бұрын

  great video. you make removing the caulk look so easy. thanks for explaining it! i wonder if instead of using caulk as a border, you could use non self-leveling caulk so it would not run? thanks again!

• 
  @rvfuntimes6144Ай бұрын

  I was setting here watching your video and I go that decal looks familiar. Click on the Rv in my pic and you will see why. Enjoyed it Vana.

• 
  @lindsayspates8907Ай бұрын

  If you bead the edges then swirl the tip as you fill in the center you won't need the barrier, you'll waste less lap seal, and you won't need that enormous bead in the center. Nobody is hating on you, they're just giving you advice to be more efficient in the future.

• 
  @rubinrowles9634Ай бұрын

  Cheap, yes, but a lot more added weight. I like the idea though!

• 
  @victoriapoitras944Ай бұрын

  Just a couple of questions! Do the plastic pieces that go under the microwave plate melt? It’s there a certain temp you don’t go above? And how do you use the combination setting?

• 
  @williambolds7982Ай бұрын

  Thanks for this video!

• 
  @banginsteel49782 ай бұрын

  Thanks, I will try the barrier idea!

• 
  @ScottyPCrypto2 ай бұрын

  Those are pretty easy; HOWEVER, I'm stumped on changing the led light over the stovetop.......those at least had the little clips. I don't see that on the stove top one.

• 
  @Stevie66362 ай бұрын

  Damn I love that little flame thrower.

• 
  @brtjones252 ай бұрын

  What is the caulk barrier???? I would like to use it

• 
  @embededfabrication44822 ай бұрын

  Needs to be white oak

• 
  @michellefields90852 ай бұрын

  A real review. Thank you

• 
  @edschultz74382 ай бұрын

  Perfect, concise instructions. Thank you!

• 
  @philsalsbery99942 ай бұрын

  Just came across your great video. Once the black tank is properly flushed, do you recommend adding several gallons of fresh water via holding down the flush on the toilet to keep some water in the tank at all times?

• 
  @davidmittlesteadt15462 ай бұрын

  Great video!

• 
  @brianswiger93902 ай бұрын

  Thanks for taking the time and making this video! Sorry there are so many negative people in this world especially on the internet. If you don't like this method... don't use it and move on or better yet, make your own video for people to criticize.

• 
  @eedom692 ай бұрын

  That looks a lot softer than sikaflex no?

• 
  @guydeb2debbie4623 ай бұрын

  Silly question the time is still the same as what a regular oven calls for? Pizza 16-18 mins in regular oven. Same in convection?

• 
  @guydeb2debbie4623 ай бұрын

  Thank you so much for posting this. My rv oven glass is loose and don’t wanna take a chance until we get that fixed

• 
  @jodirachel45263 ай бұрын

  Can youhelp me replace the inside d seals please

• 
  @jodirachel45263 ай бұрын

  How do i replace the inside d seals

• 
  @RicardoTrujillo-im2dd3 ай бұрын

  How do I get volume

• 
  @1987whipper3 ай бұрын

  Hyper extended. Hahaha. Can’t hide the nurse in ya

• 
  @lizheadrick62844 ай бұрын

  What about turning off the power??! Should have been the first thing to do??? Thanks for making the video easy to understand

• 
  @LonghaulLifesavers4 ай бұрын

  If you have the lights turned to the off position there is no power running to the lights when you change them

• 
  @hiddenspringshappenings39454 ай бұрын

  Great video.

• 
  @patrickyork29755 ай бұрын

  Thank you for posting this straight forward maintenance video. I need to do this to mine and felt it was just a simple job not worth paying someone a stupid fee to do it. As my camper is just a van it is small and will take no tie to do this.

• 
  @user-pm7kt9zp2p5 ай бұрын

  whatt does it cost?

• 
  @user-pm7kt9zp2p5 ай бұрын

  great video btw

• 
  @grantmccabe89666 ай бұрын

  I never use Dicor because it cracks after a few years, I see people slapping on coat after coat of Dicor and getting a huge build up of caulking, better to use Mulco or something similar.

• 
  @sallyburkett-caskinette87237 ай бұрын

  Thank you, you were a big help!

• 
  @forgottenamericana7 ай бұрын

  Thanks Morgan and Jon!!! Your video came up when we searched for how tos on redoing our seals!! See you guys at Trailer Village next time we’re around!

• 
  @brianroberts63566 ай бұрын

  Eterna bond adhesive tape might have been an easier solution

• 
  @kckettridge7 ай бұрын

  It's Nov. 2023. Any updates?

• 
  @bladerunner9838 ай бұрын

  When Vanna White turns a letter, she's having a vowel movement...

• 
  @starhopper4579 ай бұрын

  A very interesting video, and thank you!! A question if I may - what was the type of WD40 were you using? Silicon or PTFE based?

• 
  @LonghaulLifesavers9 ай бұрын

  Silicone

• 
  @sherrie19569 ай бұрын

  Do they pans have to be made out of a certain metal? Can I use any metal pan?

• 
  @onealmr9 ай бұрын

  I have unsubscribed. :(

• 
  @Airassault83859 ай бұрын

  I would not remove old lap sealant. I would just clean old and add new on top of old where needed. But what ever works.

• 
  @SkunkNWindow9 ай бұрын

  this is helpful, thanks for sharing

• 
  @charlesmiller31349 ай бұрын

  Why did you use Lysol cleaner?

• 
  @krisg398410 ай бұрын

  Good job !

• 
  @petesumthin335510 ай бұрын

  Just a tip for future reference, when you space out the pieces in the middle, you create weeks spots thereby threatening the integrity of the build. Keep them together.

• 
  @henrymills822111 ай бұрын

  Shouldn’t the new oil jug be higher than the tank for it to siphon properly.

• 
  @lauramore413411 ай бұрын

  Great tips - especially using round pans!

• 
  @jeffnoland920311 ай бұрын

  Did you do all the edges or just the front? 0:32

• 
  @vaasnaad11 ай бұрын

  As a local, I'm aware of the state of things a couple years ago. What a difference time and new owners can make! Staff is super SUPER friendly and helpful, no problem with the sites, lots of upgrades, fantastic Wifi, facilities are nice and clean, property is very well maintained. They don't have a 10 year rule but I hate those as a semi-vintage owner finishing off a custom job. I'm not going to be an RV snob but there is nothing egregious parked on premises. Neighbors have felt like... well like neighbors did back in the late 70's. It's not Fort Wilderness, but it's a great little town park with its own charm. I've been seriously enjoying my stay!

• 
  @malanalan111 ай бұрын

  Looks like you don't value your time.