Пікірлер

• 
  @kyleerhard92845 күн бұрын

  I still screwed it up, and the bottom few levels dont fold out 😂 I feel dumb

• 
  @unboxingsynapses92614 күн бұрын

  It's funny because behind the scenes I've screwed it up as well. Lol

• 
  @kyleerhard92844 күн бұрын

  @unboxingsynapses9261 🤣 I don't feel quite as bad now. After some contemplation, I had to switch 2 sleeves around at the bottom, and it fixed the bottom 2 compartments Now, it is correct. That simple switch was so hard to see LOL

• 
  @unboxingsynapses92614 күн бұрын

  @@kyleerhard9284 👍👍👍

• 
  @mnarlis7 күн бұрын

  Brought one back in April and lasted one and a half washes then just stopped working so weird but unlike your review there are plenty of negative ones too. Would never purchase this so-called American-made washer. This company has really gone downhill and now let's see if they will refund me for this junk.

• 
  @unboxingsynapses92614 күн бұрын

  @mnarlis That is very unfortunate. Hopefully you get yours refunded. Please let me know how that goes through with the customer service. Luckily for mine it's still working just fine for the past year. I have a 2-acre property and my driveway is very long and it grows lots of slimy molds and moss but thank goodness my power spray hasn't failed me yet. Thank you for your comment.

• 
  @Saravan-efx8 күн бұрын

  Can it be mopped

• 
  @user-dk9ig4rd2w13 күн бұрын

  Thanks gang

• 
  @skippyrod253214 күн бұрын

  What bolt did you use to break the rotor free?

• 
  @jimmysp4des22924 күн бұрын

  Jesus christ, whats with the damn voice?

• 
  @Harry_YE27 күн бұрын

  Hello, enjoyed your video. We would like to invite you to try our robot vacuum cleaner, how can I contact you?

• 
  @maryrosekeithcaro1491Ай бұрын

  Ssssssss#sss

• 
  @ryanreeves70Ай бұрын

  $19 at lowes on clearance

• 
  @unboxingsynapses9261Ай бұрын

  Damn. That's like 50% off.

• 
  @milanchetoantony12262 ай бұрын

  This iscwaste of money it can't even get on table and other staf to ckean them, thus just cleans the floor...

• 
  @unboxingsynapses92612 ай бұрын

  You got a point Sir. But for me it's been a little helper. It has really keep my house just a little bit more cleaner. yes there are areas to which the bot can't reach but that's okay. Lastly I also bought it because at that time it was on sale. thanks for the comments.

• 
  @daylightangel14942 ай бұрын

  What about the soap tube??? Did you not get that?

• 
  @unboxingsynapses92612 ай бұрын

  Yes. I did get the soap hose with the pressure washer. Thank you for asking.

• 
  @daylightangel14942 ай бұрын

  @@unboxingsynapses9261 ok I didn't see not one video about it. The thing is it's not sucking up the soap lol. I kept searching videos, found something that Says you have to use the soap attachment for the sprayer for it to work. Is that true?? Or how did you get it to work ?

• 
  @unboxingsynapses92612 ай бұрын

  @@daylightangel1494 Sorry I didn't utilize the siphon hose in my video. If you already hooked "the soap hose" up to the barbed fitting located right by the high-pressure hose and place the end of chemical siphon hose with filter on it into container holding cleaning solution and lastly by using the black tip for low pressure so that you are able to disperse the soap properly then you're set. There's also a video of another youtuber if you'd like to watch @ around 5:50 he was showing how he was utilizing the siphon hose. kzread.info/dash/bejne/nn6B1Maej6S6Xc4.html . and lastly, Use only soaps and chemicals designed for pressure washer use. Do not use bleach. Hope this will help you. thank you

• 
  @mrb4012 ай бұрын

  Nice unboxing and test. I’m trying to decide between this model or the pricier 3000 w the Honda engine. Any thoughts between the two?

• 
  @unboxingsynapses92612 ай бұрын

  @@mrb401 I heard Honda engines are pretty reliable. I'm not sure what your applications are? but if you're just using it occasionally. then you're probably okay with the latter if you're on a budget and not using it for some super heavy duty stuff.

• 
  @angeltradess2 ай бұрын

  Thanks

• 
  @unboxingsynapses92612 ай бұрын

  Thank you

• 
  @benjaminleslie31552 ай бұрын

  Key word "assembled"

• 
  @warnersfunhouse59382 ай бұрын

  Rumbas

• 
  @sevvalnazireyalcin14842 ай бұрын

  😮😮😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😊😊😊😊😊😊😊😊😊

• 
  @warnersfunhouse59382 ай бұрын

  I love roumbas

• 
  @FamiliaLopezHerasme2 ай бұрын

  Thank you! It was easier wtching this video

• 
  @renipatvilmoskorte74582 ай бұрын

  You still alive? Hows the harness doing?

• 
  @unboxingsynapses92612 ай бұрын

  Thanks for checking on me. So far the harness has been keeping me alive. I've only fell one 60 foot maple tree so far. Now I realize felling trees is no joke and very dangerous.

• 
  @user-nd5xk8vm2z3 ай бұрын

  just want to state that "all parking brake systems are self-adjusting" is wrong on our truck. There is NO self-adjuster on this year Tundra, it is manual at pedal, linkage/balancer junction under the driver seat AND in the rotor/hub. Usually the self-adjuster is in the drum portion of the rotor, but this vehicle does NOT have a self adjuster. As you stated later, it is manual, so not sure why you said "all parking brake systems are self-adjusting" earlier in the video (I wish it were like most vehicles)

• 
  @unboxingsynapses92612 ай бұрын

  @user-nd5xk8vm2z Thank you for pointing it out. Sorry but the statement that you specifically mentioned was referenced to: Chilton Repair manual # 68610 Tundra 2007-2012 Section page 9-21 Brakes on 12 Parking Brake adjustment. Information (1). None the less thank you for your info gladly appreciate your advices.

• 
  @mikecoil36263 ай бұрын

  Great video :) it was the fall at the beginning that got me 😂

• 
  @unboxingsynapses92613 ай бұрын

  Lol. Thanks for watching

• 
  @jasonburton72073 ай бұрын

  woo

• 
  @ishowstudent3 ай бұрын

  4:29

• 
  @funone2no4 ай бұрын

  Nice Video Thank You. I bought vacuum for $8.00 Goodwill

• 
  @unboxingsynapses92614 ай бұрын

  $8 Bucks. Wow. Lucky you @funone2no. But hopefully it works just fine.

• 
  @andrewlewis92344 ай бұрын

  How much oil did you add?

• 
  @unboxingsynapses92614 ай бұрын

  Hello, I poured almost 1 pint or 473 mL

• 
  @unboxingsynapses92614 ай бұрын

  Just make sure to keep checking your dip stick level.

• 
  @Gabbyfd84 ай бұрын

  Gracias 🤩

• 
  @unboxingsynapses92614 ай бұрын

  De nada.

• 
  @user-ob8nq5jk5r4 ай бұрын

  😮😮😮

• 
  @mvblitzyo5 ай бұрын

  wow what an most excellent how to if you had want thanks for the education ..

• 
  @candycooley24225 ай бұрын

  Thank you so much for posting this! Your video makes this look easy. I took everything out of the box, looked at the instructions, and said, "Nope. I don't feel like spending my evening attempting to assemble this thing!" LOL. Now that it makes sense, I'll go put it together. 😄

• 
  @unboxingsynapses92615 ай бұрын

  Thank you for watching as well. Believe it or not it did take me a little bit trying to piece those little things together. Lol

• 
  @libertyvilleguy29036 ай бұрын

  Very helpful; with this, I was able to avoid a $150 service call. Took me all of 2 minutes. Much appreciated!

• 
  @user-jk9vq5ox9v6 ай бұрын

  Уой

• 
  @heathergrutt47696 ай бұрын

  Thank you for posting this. This shoe rack was not the easiest to put together.

• 
  @unboxingsynapses92616 ай бұрын

  You're right. it did take me a couple tries to put it together. Lol

• 
  @renmo39746 ай бұрын

  Mine was working fine for a few weeks but now the door won’t close. I removed all the shoes and the metal tabs at top that hang over the door aren’t laying flush. Any suggestions? It sure was great while it lasted.

• 
  @unboxingsynapses92616 ай бұрын

  Hello? Those metal tabs that hang over the door are not heavy duty. It might have stretched out causing the tab to go uneven. Re-bend the tab to their original angle and it should fit back like it was new.

• 
  @JesusCruz-ng7bm6 ай бұрын

  I got a left over screw

• 
  @unboxingsynapses92616 ай бұрын

  Lol.

• 
  @golfhack35816 ай бұрын

  A well done review! I've had this model for 11 months. It worked just okay, but unless you have a pet that sheds hair, a regular vacuum will do a much better job and much faster too. It takes my Roomba i3+ (i3550) 42 minutes to vacuum our family room that takes me just 5 minutes.

• 
  @unboxingsynapses92616 ай бұрын

  Totally agree. It's been about 11 months since and I haven't had any major issues except from time to time I would loose connection. and the second thing that I learned is always check for accumulation of hair getting caught up on the corner brush and the roller brush. You keep these parts clean it'll stays very sufficient at what it does, pick up crumbs and dirt.

• 
  @MrEnjoyment2 ай бұрын

  ⁠@@unboxingsynapses9261qbt I’m in😅😮❤❤❤pc b a min I’m in❤❤❤

• 
  @Gortman12 ай бұрын

  Ya but that's 5 minutes of doing something else. Also you have to get the vacuum out and put it away. You might have to vacuum 2 - 3 times per week when this can run overnight. Also if you have pets like I do it needs to go more like 5 - 10 times per week.

• 
  @unboxingsynapses9261Ай бұрын

  @@Gortman1 You got a pretty good point as well. So far it's been pretty good for me.

• 
  @QuantumMechanic_886 ай бұрын

  I'm not fond of short videos, but this was a decent review . I'll check out the Husky saw. Thanks

• 
  @unboxingsynapses92616 ай бұрын

  Thank you @QuantumMechanic_88.

• 
  @J.J.Barrientes6 ай бұрын

  I wear a size 11 will this rack fit all my pairs of shoes?

• 
  @unboxingsynapses92616 ай бұрын

  For big sizes 11 and up You can, BUT I wouldn't recommend it. Your size will be sticking out about 6 to 8 inches out. Also, it wasn't designed for high top shoes either.

• 
  @kellyhall94715 ай бұрын

  My husband is a size 15. His shoes stick out a little, but it's a lotttt better than what we had.

• 
  @unboxingsynapses92615 ай бұрын

  @@kellyhall9471 Size 15 Shoes? You could probably only fit one pair of shoes? lol

• 
  @daniellehoops31936 ай бұрын

  Wow your robot is so cool😮

• 
  @BlackHamRadioUniversity7 ай бұрын

  Hey man thank you for this video. I just wanted to let you know that I finished the project and have posted a 4 part video series of the start to finished product topped off with a video of the launch. Here is the link to the video series. kzread.info/dron/PMx1VPM5t7ntR2e7xEc6EQ.html

• 
  @unboxingsynapses92617 ай бұрын

  Yes Sir. I did watch all of your videos and enjoyed the process. Thank you Sir.

• 
  @BlackHamRadioUniversity7 ай бұрын

  @@unboxingsynapses9261 I ment to give you a shot out on the first and final video but I forgot to add it in. I will do a video specifically giving you a shot out.

• 
  @herbhungwell81347 ай бұрын

  Dude! You got a federal warrant or what? lol. Whats up with the face cover and voice change..Kinda sketchy to say the least

• 
  @unboxingsynapses92617 ай бұрын

  Lol. No Warrant here Sir. I'm still getting used to being on the video. My focus is mainly on the subject or the product I'm showing or working on.

• 
  @chadlbradly29425 ай бұрын

  @@unboxingsynapses9261I enjoyed the fact that you used an AI layover, very very easy to understand for people who are not native speakers 😊

• 
  @unboxingsynapses92615 ай бұрын

  @@chadlbradly2942 Thank you for your kind comments.

• 
  @fenix111raulin87 ай бұрын

  Este robot lo venden en el cosco

• 
  @unboxingsynapses92617 ай бұрын

  Creo que venden roombas en cosco

• 
  @jamielorence47927 ай бұрын

  put your vid on slow replay. followed your directions step by step. Thanks man!

• 
  @BlackHamRadioUniversity7 ай бұрын

  Thank you so much for taking your time to provide us with these links. I know you didnt have to do it but you did and I am grateful. I was look at the video and the links and it looks like the 1 in. x 2 in. MIP Red Brass Nipple Fitting that you provided in your links look a lot longer that the 1 in. x 2 in. MIP Red Brass Nipple Fitting in the 8:36 mark of this video. Take a look and tell me if they look the same. one looks longer than the other.

• 
  @unboxingsynapses92617 ай бұрын

  Not a problem at all Sir. The good thing about those parts is that you can interchange with different parts as you desire. On the brass nipples as long as they are not too long nor too short and you can tightly screw both ends to the 2 Pieces of 1-1/2 in. x 1 in. PVC Schedule 40 SPG x Hub Reducer Bushing Fitting. That's what matters. On the side note. While I was at Home Depot or Lowe's I pre fitted most of the parts just to make sure they all align together.

• 
  @BlackHamRadioUniversity7 ай бұрын

  I have been looking for almost two weeks for the 1 - 1/2 inch x 1 in PVC Reducer Bushing ($2.95) and cannot find it at all. Can you do me a HUGE favor and send me a direct link. I really cant find this bushing. Also the 1 - 1/2 inch x 1 - 1/2 inch SCH40 Coupling is missing in action also. I went to home Depot but they dont have these exact kind. The ones they have only allow the PVC to go into the coupling about 1/4 in. Please help LOL Also when I went to get the 1- 1/2 SCH40 PVC piping for the air tank and the barrel they did not fit any of the other items that you listed.

• 
  @unboxingsynapses92617 ай бұрын

  Hello Sir. Hope this will help you 1 - 1/2 inch x 1 in PVC Reducer Bushing ($2.95): www.homedepot.com/p/VPC-1-1-2-in-x-1-in-PVC-Schedule-40-SPG-x-Hub-Reducer-Bushing-Fitting-27-438-211B/317246327 1 - 1/2 inch x 1 - 1/2 inch SCH40 Coupling: www.homedepot.com/p/Charlotte-Pipe-1-1-2-in-PVC-Schedule-40-S-x-S-Coupling-PVC021001400HD/203811389 Good luck

• 
  @BlackHamRadioUniversity7 ай бұрын

  @@unboxingsynapses9261 Thanks. I now have everything I need to make the launcher.

• 
  @unboxingsynapses92617 ай бұрын

  @@BlackHamRadioUniversity Would love to see your creation Sir. Good luck

• 
  @rrydinhigh24528 ай бұрын

  Thank you. Good vid. -👍🏽

• 
  @mymiscellaneouslife72288 ай бұрын

  Thank you for posting this one. I was having hard time to put things together. And wanted to return. But this video saved all the efforts. ☺️

• 
  @BlackHamRadioUniversity8 ай бұрын

  Can you tell me where you got the 1 - 1/2 inch x 1/2 SCH 40 PVC Reducer Bushing . I looked at Home Depot and Lowes but I could not find it. Where did you get it from?

• 
  @unboxingsynapses92618 ай бұрын

  1-1/2 in. SPG X 1/2 in. FPT Red SCH40 PVC Bushing: www.homedepot.com/p/VPC-1-1-2-in-SPG-X-1-2-in-FPT-Red-SCH40-PVC-Bushing-27-438-209B/317246325

• 
  @BlackHamRadioUniversity8 ай бұрын

  In the 7:05 mark of this video it said 24" PVC Pipping but what size is it? 2", 3"?

• 
  @unboxingsynapses92618 ай бұрын

  I got it at lowe's * 5ft. PVC pipe, Silver-Line Plastics 1-1/2-in x 5-ft 330 Psi Schedule 40 PVC Pipe www.lowes.com/pd/Charlotte-Pipe-1-1-2-in-dia-x-5-ft-L-330-PSI-PVC-Pipe/3133039

• 
  @BlackHamRadioUniversity8 ай бұрын

  @@unboxingsynapses9261 Thanks man. You are that greatest man LOL

• 
  @unboxingsynapses92618 ай бұрын

  @@BlackHamRadioUniversity Thank you as well Sir. Good luck, hopefully you can get all those things in your local Home Depot. By the way you got a nice cool channel. I just subscribed. Lastly, If you ever made the cannon I'm hoping to see it in your channel.

• 
  @starttofinishpodcasting37218 ай бұрын

  @@unboxingsynapses9261 For some reason youtbe thought I was spamming so it will not allow me to comment with my other channel for 24 hours so I am responding to you on my other youtube channel. But yeah I will make sure I make a video to the DIY air cannon. Thanks again!

• 
  @BlackHamRadioUniversity7 ай бұрын

  @@unboxingsynapses9261 Absolutely!

• 
  @BlackHamRadioUniversity8 ай бұрын

  Can you provide a list of all the stuff you used. I went to Lowes and Home Depot and couldnt find any of this stuff in its proper size.

• 
  @unboxingsynapses92618 ай бұрын

  I will be providing all the list on the description shortly to make it easier for everyone. Sorry it's giving you a little trouble looking for all those items. Please be mindful that sometimes it depends on the location where you at. In my area I had to drive to 3 different Home Depot or Lowe's to get what I needed.

• 
  @mikeramsey97478 ай бұрын

  Definitely one of the better builds that I have seen, I like a larger pressure tank 3" schedule 40 and using a springer control valve for the release, but you made probably one of the nicer launchers.

• 
  @unboxingsynapses92618 ай бұрын

  yes Sir. I did see that cannon with a springer control valve as a trigger release and it is sweet. In my application it all went down to how much would I be using the cannon (turned out to be once in a blue moon) and lastly, I wanted to spend very little as possible.

• 
  @WayneAlbergotti-zy3hh8 ай бұрын

  To the point, spot on instructional video. Much appreciated!

• 
  @davidconway5658 ай бұрын

  Shorten the flip line and put the bottom strap around the spur shanks.