We are the #1 brand representing the Trucker and Diesel Industry worldwide! Give that Like and Subscribe button a click and come visit us at diesellife.com
The only way that's articulating is if you roll over. And then you got bigger things to worry about.
@rob373210 сағат бұрын
Hey Chris …. Rob from Toronto …. That car wash has 1300 reviews and they are basically All 5 star. Apart from the music there is also a pretty cool light show. Not sure how close you are to this location, but perhaps take the “burb” through.
@pauljoyce852912 сағат бұрын
Mate in one ear and out the other. You keep on rocking just as your are and bollock's too the keyboard warrior's.
@cahillsonia024561516 сағат бұрын
Not necessarily your getting it done 🤙🏽
@robertmcbee467120 сағат бұрын
Howdy Chris, When you were talking about tying down that Deere loader I noticed that there is a stamp on the counter weight at the back of the machine that instructs to use that point. As far as using the pivot latch, and for the small distances you travel, I would imagine that you would be safe. But, something to consider is that an ounce of prevention is worth a pound of cure. Ultimately your decision as you are the driver and sole person in charge. Stay safe!
@marekr671323 сағат бұрын
Ihthghr8
@marshallross1634Күн бұрын
It is just a safety device , some haulers use them and some do not .
@carlmarr2984Күн бұрын
I do think this guy is full of BS
@robpenn48Күн бұрын
Hello Chris , love your videos bud. I wanted to say I never set the trailer brakes when detaching the neck unless I’m dropping the trailer completely. Maybe give it a try. I see you always forget to push the brake knob when you’re detaching. Just wanted to share my technique. Have a great day sir.
@nightfall22Күн бұрын
Another great video down for the books. I had to play catch up a bit 😂
@grantbaker2037Күн бұрын
The lean green money machine,looking lean and mean sir
@allen9544Күн бұрын
Good luck with the emissions truck
@nomadmarine0331Күн бұрын
The DRIVER rules. End of story.
@Tyronewiggums1Күн бұрын
Gotta get fonz to run the one stack Mack, seems like he really enjoys that kind of work
@Tyronewiggums1Күн бұрын
Ordering a new 589 (I know), but what color green is that?
@Nick-nw6zgКүн бұрын
Hahahahhaha love the Elevator music
@perrybarton7269Күн бұрын
She is super clean!!!!!!!!!!!!!!
@Ted_UnderhillКүн бұрын
Hardest working man on KZread. Keep the content comin!
@shawnjarman9860Күн бұрын
Where I’m at, technically, if you don’t use the frame lock,you are supposed to have 4 points on both the front half of the loader and same for the back half of the loader, as well as the bucket chained down, but when I did heavy haul, I pretty much did it the way you do, don’t let the haters bug you, just not worth it
@tbomber7716Күн бұрын
Don't know about Florida but here in Indiana, anything articulate that can be locked better be. DOT loves to look for that. One thing I know for sure. There is nothing lazy about you.
@loganllewellyn9330Күн бұрын
I’m sure the way you’ve been chaining down is more than enough, at the end of the day as long as you’re confident with your securement & DOT doesn’t have any issues with it then just send it! No need to change it up. Like you said, If you’re going across state lines then maybe I can see the need for more chains, but for the most part you’re local, I can tell you the lowboy guys I used to work with do it pretty much identical to how you do it, and there has never been an issue 🤷🏻 Keep doing what you’re doing Chris! As always stay safe brother 🤙🏼
@chadsmith9979Күн бұрын
Part of where you're tying it down is by the frame so I think he's misspelling or misspeaking
@jasonjackson7154Күн бұрын
Well they must be upset they can’t pull with a beautiful Pete, everyone is different as long as you are comfortable with it is all it matters 👊🇺🇸🇺🇸
@chadsmith9979Күн бұрын
The Red bar keeps the machine from swaying back and forth going down the road keep it from turning but if you're only going 10 minutes down the road I wouldn't worry about it
@BillDozer316Күн бұрын
DOT can get you for not having that articulation lock in place. Take that as you will. For what it's worth, I don't pin that crap either lol tie down 4 corners and roll🤷♂ If DOT wants to get you on something, they'll get you regardless.
@kellysimpson5081Күн бұрын
I can't believe you got that comment got to love the haters though much as I hate they still watch
@DiesellifeclothingКүн бұрын
That's right bro👊
@nightfall22Күн бұрын
Oh hell yeah brother. I’m loving the green lantern look 🤘🏾👊🏾😍
@DiesellifeclothingКүн бұрын
Appreciate it!!👊
@cl6426Күн бұрын
It was probably your buddy commenting that in the white truck that tells you can't park there. He's a professional.
@cary2677Күн бұрын
Are you interested in a light load run from San Antonio, Tx to Bunnell, Fl?
@loganllewellyn9330Күн бұрын
She looks absolutely stunning Chris!! 🤙🏼
@DiesellifeclothingКүн бұрын
Thanks 👊
@chrisstokes1093Күн бұрын
Good Job 💪
@michaelspadafore9634Күн бұрын
You are hard working no dispute there but according to fmcsr any machine that articulates must be secured on all four corners of the front of the unit and rear unit unless it is equiped with a mechanical locking device. The only thing i dislike about drivers is to make a statement that I'm only going 10 miles! Accidents can happen at anytime and if you cause injuries those lawyers for the plaintiff will have a field day with you in court. And the dot will be right behind. Your right though people should be nice about giving their opinions. Be safe ! And cover your ass against the money grabbers. You should have a small green book with the fmcsr's in the truck.(its required)
@DiesellifeclothingКүн бұрын
Noted thanks
@johnmollenkofsr7379Күн бұрын
GM Chris u are far from lazy the way u hustle the work u do shit he just jelly bc he ain't got the bad ace Pete like u got and no were near the work u got
@user-om1sx9hz8lКүн бұрын
What kinda weight do you have there
@PhilWolfe-tp3tvКүн бұрын
Have a great day. I am with you about caining down.
@leeshaver7825Күн бұрын
I've said it before on other channels I watch and I'll say it here It's your truck your trailer you pay the truck payment and the insurance along with that trailer it's your heavy haul business you don't need to be schooled or critiqued on how you run your business or load equipment
@dustincavell5254Күн бұрын
I think he’s talking about running a chain through the articulation point. That’s how I was tought.
@martinc21952Күн бұрын
You are one of the hardest working truckers I have seen on here. As long as it holds the load in place, there is nothing wrong with the way you tie it down. Don't worry about the haters. They are just showing their ignorance and jealousy.
@raymondbrowder6770Күн бұрын
If your going to haul boats you have to add boats to your MC-150 boats don’t fall under machinery
@crockettslateКүн бұрын
I found the more lights the better. Semi retired after 42yrs, Giddyupgo and be safe about it 😊
@raymondbrowder6770Күн бұрын
Check out sling companies in your area and crane rigging supply there is a place I Sarasota that sells chain
@Klove5343Күн бұрын
I would be so nervous driving with those blocks
@ericreincke4441Күн бұрын
There is no way you can
@randywhelan8944Күн бұрын
I hope this once you put your fenders on that you don't keep forgetting to raise up the neck brace on the trailer. That neck brace can wreck a set of fenders QUICK.
@douglaskinder9385Күн бұрын
He doesn't he's already junked 2 sets of fenders
@randywhelan8944Күн бұрын
Ooh hadn't seen the fenders on it yet , got to go back some videos I guess.
@rodneyrote6261Күн бұрын
Little hard on the gloves when you run over them with a roller
@erniewood9935Күн бұрын
Good morning
@andrewcox74162 күн бұрын
Remember this industry is a marathon not a sprint, form a routine and don’t stray away from it. Haste makes waste
@DarrkMane2 күн бұрын
There's always someone out there who's done worse / expensive BS. All good, brother. She still looks good regardless.
Пікірлер
That is a sweet Pete❤
Good looking truck. What a clean machine!
The only way that's articulating is if you roll over. And then you got bigger things to worry about.
Hey Chris …. Rob from Toronto …. That car wash has 1300 reviews and they are basically All 5 star. Apart from the music there is also a pretty cool light show. Not sure how close you are to this location, but perhaps take the “burb” through.
Mate in one ear and out the other. You keep on rocking just as your are and bollock's too the keyboard warrior's.
Not necessarily your getting it done 🤙🏽
Howdy Chris, When you were talking about tying down that Deere loader I noticed that there is a stamp on the counter weight at the back of the machine that instructs to use that point. As far as using the pivot latch, and for the small distances you travel, I would imagine that you would be safe. But, something to consider is that an ounce of prevention is worth a pound of cure. Ultimately your decision as you are the driver and sole person in charge. Stay safe!
Ihthghr8
It is just a safety device , some haulers use them and some do not .
I do think this guy is full of BS
Hello Chris , love your videos bud. I wanted to say I never set the trailer brakes when detaching the neck unless I’m dropping the trailer completely. Maybe give it a try. I see you always forget to push the brake knob when you’re detaching. Just wanted to share my technique. Have a great day sir.
Another great video down for the books. I had to play catch up a bit 😂
The lean green money machine,looking lean and mean sir
Good luck with the emissions truck
The DRIVER rules. End of story.
Gotta get fonz to run the one stack Mack, seems like he really enjoys that kind of work
Ordering a new 589 (I know), but what color green is that?
Hahahahhaha love the Elevator music
She is super clean!!!!!!!!!!!!!!
Hardest working man on KZread. Keep the content comin!
Where I’m at, technically, if you don’t use the frame lock,you are supposed to have 4 points on both the front half of the loader and same for the back half of the loader, as well as the bucket chained down, but when I did heavy haul, I pretty much did it the way you do, don’t let the haters bug you, just not worth it
Don't know about Florida but here in Indiana, anything articulate that can be locked better be. DOT loves to look for that. One thing I know for sure. There is nothing lazy about you.
I’m sure the way you’ve been chaining down is more than enough, at the end of the day as long as you’re confident with your securement & DOT doesn’t have any issues with it then just send it! No need to change it up. Like you said, If you’re going across state lines then maybe I can see the need for more chains, but for the most part you’re local, I can tell you the lowboy guys I used to work with do it pretty much identical to how you do it, and there has never been an issue 🤷🏻 Keep doing what you’re doing Chris! As always stay safe brother 🤙🏼
Part of where you're tying it down is by the frame so I think he's misspelling or misspeaking
Well they must be upset they can’t pull with a beautiful Pete, everyone is different as long as you are comfortable with it is all it matters 👊🇺🇸🇺🇸
The Red bar keeps the machine from swaying back and forth going down the road keep it from turning but if you're only going 10 minutes down the road I wouldn't worry about it
DOT can get you for not having that articulation lock in place. Take that as you will. For what it's worth, I don't pin that crap either lol tie down 4 corners and roll🤷♂ If DOT wants to get you on something, they'll get you regardless.
I can't believe you got that comment got to love the haters though much as I hate they still watch
That's right bro👊
Oh hell yeah brother. I’m loving the green lantern look 🤘🏾👊🏾😍
Appreciate it!!👊
It was probably your buddy commenting that in the white truck that tells you can't park there. He's a professional.
Are you interested in a light load run from San Antonio, Tx to Bunnell, Fl?
She looks absolutely stunning Chris!! 🤙🏼
Thanks 👊
Good Job 💪
You are hard working no dispute there but according to fmcsr any machine that articulates must be secured on all four corners of the front of the unit and rear unit unless it is equiped with a mechanical locking device. The only thing i dislike about drivers is to make a statement that I'm only going 10 miles! Accidents can happen at anytime and if you cause injuries those lawyers for the plaintiff will have a field day with you in court. And the dot will be right behind. Your right though people should be nice about giving their opinions. Be safe ! And cover your ass against the money grabbers. You should have a small green book with the fmcsr's in the truck.(its required)
Noted thanks
GM Chris u are far from lazy the way u hustle the work u do shit he just jelly bc he ain't got the bad ace Pete like u got and no were near the work u got
What kinda weight do you have there
Have a great day. I am with you about caining down.
I've said it before on other channels I watch and I'll say it here It's your truck your trailer you pay the truck payment and the insurance along with that trailer it's your heavy haul business you don't need to be schooled or critiqued on how you run your business or load equipment
I think he’s talking about running a chain through the articulation point. That’s how I was tought.
You are one of the hardest working truckers I have seen on here. As long as it holds the load in place, there is nothing wrong with the way you tie it down. Don't worry about the haters. They are just showing their ignorance and jealousy.
If your going to haul boats you have to add boats to your MC-150 boats don’t fall under machinery
I found the more lights the better. Semi retired after 42yrs, Giddyupgo and be safe about it 😊
Check out sling companies in your area and crane rigging supply there is a place I Sarasota that sells chain
I would be so nervous driving with those blocks
There is no way you can
I hope this once you put your fenders on that you don't keep forgetting to raise up the neck brace on the trailer. That neck brace can wreck a set of fenders QUICK.
He doesn't he's already junked 2 sets of fenders
Ooh hadn't seen the fenders on it yet , got to go back some videos I guess.
Little hard on the gloves when you run over them with a roller
Good morning
Remember this industry is a marathon not a sprint, form a routine and don’t stray away from it. Haste makes waste
There's always someone out there who's done worse / expensive BS. All good, brother. She still looks good regardless.