This depends on the type of flight. For cruising, you can expect around 8-10 minutes. For aggressive freestyle, it's about 5 minutes. With a larger battery, like 1300mAh or 1500mAh, you might get a bit more flight time, but I prefer using multiple batteries and swapping them out frequently.
@demarcolife3Күн бұрын
If we use DJI controller 2? Is all the same or something changes? Also, all cables and everything else comes with tbe kits or need to be bought separately? Many thanks.
@fpv-geekКүн бұрын
I'm not very familiar with the DJI controller, but you won't need the ELRS receiver, and in Betaflight, you'll need to configure it to receive control signals from the air unit. By the way, this isn't a kit; I put these parts together based on my personal preferences. However, there are ready-made kits available for purchase.
@capbabyface2505Күн бұрын
Do you have links to the parts?
@fpv-geekКүн бұрын
I ordered the parts from different stores, do you need the link for a specific part? The stores are: n-factory.de drone-fpv-racer.com
@capbabyface2505Күн бұрын
@@fpv-geek no I think I can find them thank you
@andrewamadorchavira37052 күн бұрын
Does this work with the DJI Goggles 3? I just bought an AVATA 2 combo 3 weeks ago, I'm planning on buying a freestyle drone later but idk what drones work with the Goggles 3
@fpv-geek2 күн бұрын
Unfortunately I don't know, I use the Integra.
@_Elix_7 күн бұрын
"ultimate freestyle build " while having a dji 03 on a deadcat frame and a variable tilt mount at the font is a crazy thing to say lmfaooo
@fpv-geek7 күн бұрын
Would you say that an X-frame makes that much difference? And what's the problem with the O3 and a variable tilt mount?
@SkKH-hh7gn7 күн бұрын
$$ ?❤😊
@fpv-geek7 күн бұрын
What do you mean?
@TonyArndt10 күн бұрын
Why no capacitor
@fpv-geek10 күн бұрын
there is a capacitor (03:15)
@levioa127010 күн бұрын
Can you tell me what use remote control for fly
@fpv-geek10 күн бұрын
I use the radiomaster zorro
@levioa127010 күн бұрын
@@fpv-geekplease tell me can i use remote jumper v2
@fpv-geek10 күн бұрын
It depends on your receiver module. which module do you use?
@levioa127010 күн бұрын
@@fpv-geek jumper v2 t-litle 4 in 1
@fpv-geek9 күн бұрын
And which RX module is in your copter?
@DroneBySM11 күн бұрын
GREAT VIDEO MATE
@fpv-geek11 күн бұрын
Thank you ☺️
@drcyb3r12 күн бұрын
Almost all those FPV drones look identical. People use the same parts in every build. That motherboare was used in so many videos and the frame also looks identical. Why don't they just sell them as a fully built drone and why woudl you put a lot of time in to built it?
@fpv-geek12 күн бұрын
You can buy RTF fpv drones which are fully assembled. But I just have more fun building them.
@drcyb3r12 күн бұрын
@@fpv-geek ok, having fun building it is a point
@Energetic_Ballistic_Solutions12 күн бұрын
Info for parts?
@fpv-geek12 күн бұрын
I have a complete build video of this drone with all parts which I’ve used. Checkout my channel for more details.
@Energetic_Ballistic_Solutions12 күн бұрын
@@fpv-geek thanks will do
@redel_reiz12 күн бұрын
5 рама
@spaceminer487512 күн бұрын
You didn’t use the xt60 cut on the frame to connect battery?
@fpv-geek12 күн бұрын
Yes, I had no desire to desolder my already finished xt60 plug.
@2Bcrumbled_fpv12 күн бұрын
love mark5, got this frame too. freestyle4live.
@tl_hyped325112 күн бұрын
Which flight Controller do you use? I am personally trying to build a FPV drone but I can’t really find FCs for 4 single ESCs, which I already bought. Thx and I’m sorry for my bad English, I am German
@2Bcrumbled_fpv12 күн бұрын
its a f4
@2Bcrumbled_fpv12 күн бұрын
gruss aus herten
@fpv-geek12 күн бұрын
SpeedyBee F405 V4 with 55A ESC. I have a complete build video on my channel.
@fpv-geek12 күн бұрын
Grüße gehen zurück 👋🏻
@tl_hyped325112 күн бұрын
Thanks alot, am I able to connect 4 single ESCs to any FC or are there flight controllers that are specifically for single or 4in1 ESCs? Grüße aus Baden Württemberg
@patrick-kp4ie13 күн бұрын
Nice cuts at the end! 🔥🔥🔥
@coimbrafpv13 күн бұрын
Good job!
@fpv-geek13 күн бұрын
Thank you 🤩
@devnmgowda350813 күн бұрын
I built the same drone... But can i know about the tuning u did on this drone???
@fpv-geek13 күн бұрын
But of course. I spent many hours tuning the copter with PIDToolbox. What exactly do you want to know? Did you use the same motors and flight stack?
@devnmgowda350813 күн бұрын
@@fpv-geek can i get your insta id?
@fpv-geek13 күн бұрын
Yes, you can follow my link on my channel
@vigneshwaran977517 күн бұрын
Can you give the back side tpu design
@fpv-geek17 күн бұрын
Sure. I updated the description with a link to thingiverse ☺️
@deaafrizal17 күн бұрын
i like your video, very detail! subscribed.
@fpv-geek17 күн бұрын
Thank you very much!
@szymonzak668117 күн бұрын
id always recognise "calling for you" by venjent, or any of his songs for that matter😂
@fpv-geek17 күн бұрын
I love that song. 🎵 🤩
@patrick-kp4ie18 күн бұрын
Great build!
@fpv-geek18 күн бұрын
Thank you!
@CanaaniteRanger18 күн бұрын
True ... color correction makes wounders
@lokaero18 күн бұрын
Bro, everything is fine, but for the soldering part, include more flux and the finish of the soldering should be round mirror finish, like you need to be able to see your face in it. cover more surface area as possible and immerse the wire conductor as much as possible into the solder.
@fpv-geek18 күн бұрын
Many thanks for your tips. Unfortunately, my solder joints really don't look that good. But I'll try again with more flux. Do I have to desolder the areas first, or can I simply apply more flux and re-solder?
@lokaero18 күн бұрын
@@fpv-geek You could add flux on the existing joint, and add some more lead. But for a clean build, remove all the solder joint and re tin then solder again with flux. Mr.steele has made a video specifically on this. it can clarify all of our doubts regarding soldering.
@fpv-geek18 күн бұрын
@@lokaero Many thanks for your tips. I will try to re-solder it
@Sivart432318 күн бұрын
Dude Flux
@fpv-geek18 күн бұрын
You mean soldering?
@Sivart432317 күн бұрын
@@fpv-geek yes, for the solder, everything else looks great though. thanks for the video :)
@fpv-geek17 күн бұрын
Thank you! Yes, I have already ordered flux and will re-solder it. Thanks for your tips.
@nugrostv460019 күн бұрын
Great result ....
@fpv-geek19 күн бұрын
Thank you 🤩
@ClydeFog19 күн бұрын
galaxy props look better imo
@fpv-geek19 күн бұрын
Thank you
@sohelmahamudhridoy461820 күн бұрын
great video love you sir from bangladesh. i just want to how do i can buy a used Radiomaster boxer radio? very cheap price?
@fpv-geek20 күн бұрын
Thank you very much. You can have a look on ebay to see if there are any available.
@sparky773020 күн бұрын
Hey man. I know there is a ton of information online on what to buy when getting into FPV. I live in Germany too. I have a budget of 1.5 - 2k. What would you recoomend me to buy (also equipment to build)?
@fpv-geek20 күн бұрын
Want to get started with a 5-inch FPV drone? There are ready-made sets to buy. You'll get there with your budget. Otherwise, look for a Tinywhoop set. Like the Cetus X from BetaFPV. That's what I started with. I also have a crash compilation on my channel of this drone. Such sets are available for around 300-400€. They're all good for getting started in the hobby ☺ If you have any questions, just let me know.
@spaceminer487520 күн бұрын
Is that through dji camera? I have the same drone in green with different parts that’s yours.
@fpv-geek20 күн бұрын
One scene was shot with an Insta360 go2. The green would have been nice too, but I was afraid that it would make them harder to find in the tall grass. 😄
@spaceminer487519 күн бұрын
@@fpv-geek yep that’s true I have to rely on the beeper to find mine in grass lol
Пікірлер
Flight time???
This depends on the type of flight. For cruising, you can expect around 8-10 minutes. For aggressive freestyle, it's about 5 minutes. With a larger battery, like 1300mAh or 1500mAh, you might get a bit more flight time, but I prefer using multiple batteries and swapping them out frequently.
If we use DJI controller 2? Is all the same or something changes? Also, all cables and everything else comes with tbe kits or need to be bought separately? Many thanks.
I'm not very familiar with the DJI controller, but you won't need the ELRS receiver, and in Betaflight, you'll need to configure it to receive control signals from the air unit. By the way, this isn't a kit; I put these parts together based on my personal preferences. However, there are ready-made kits available for purchase.
Do you have links to the parts?
I ordered the parts from different stores, do you need the link for a specific part? The stores are: n-factory.de drone-fpv-racer.com
@@fpv-geek no I think I can find them thank you
Does this work with the DJI Goggles 3? I just bought an AVATA 2 combo 3 weeks ago, I'm planning on buying a freestyle drone later but idk what drones work with the Goggles 3
Unfortunately I don't know, I use the Integra.
"ultimate freestyle build " while having a dji 03 on a deadcat frame and a variable tilt mount at the font is a crazy thing to say lmfaooo
Would you say that an X-frame makes that much difference? And what's the problem with the O3 and a variable tilt mount?
$$ ?❤😊
What do you mean?
Why no capacitor
there is a capacitor (03:15)
Can you tell me what use remote control for fly
I use the radiomaster zorro
@@fpv-geekplease tell me can i use remote jumper v2
It depends on your receiver module. which module do you use?
@@fpv-geek jumper v2 t-litle 4 in 1
And which RX module is in your copter?
GREAT VIDEO MATE
Thank you ☺️
Almost all those FPV drones look identical. People use the same parts in every build. That motherboare was used in so many videos and the frame also looks identical. Why don't they just sell them as a fully built drone and why woudl you put a lot of time in to built it?
You can buy RTF fpv drones which are fully assembled. But I just have more fun building them.
@@fpv-geek ok, having fun building it is a point
Info for parts?
I have a complete build video of this drone with all parts which I’ve used. Checkout my channel for more details.
@@fpv-geek thanks will do
5 рама
You didn’t use the xt60 cut on the frame to connect battery?
Yes, I had no desire to desolder my already finished xt60 plug.
love mark5, got this frame too. freestyle4live.
Which flight Controller do you use? I am personally trying to build a FPV drone but I can’t really find FCs for 4 single ESCs, which I already bought. Thx and I’m sorry for my bad English, I am German
its a f4
gruss aus herten
SpeedyBee F405 V4 with 55A ESC. I have a complete build video on my channel.
Grüße gehen zurück 👋🏻
Thanks alot, am I able to connect 4 single ESCs to any FC or are there flight controllers that are specifically for single or 4in1 ESCs? Grüße aus Baden Württemberg
Nice cuts at the end! 🔥🔥🔥
Good job!
Thank you 🤩
I built the same drone... But can i know about the tuning u did on this drone???
But of course. I spent many hours tuning the copter with PIDToolbox. What exactly do you want to know? Did you use the same motors and flight stack?
@@fpv-geek can i get your insta id?
Yes, you can follow my link on my channel
Can you give the back side tpu design
Sure. I updated the description with a link to thingiverse ☺️
i like your video, very detail! subscribed.
Thank you very much!
id always recognise "calling for you" by venjent, or any of his songs for that matter😂
I love that song. 🎵 🤩
Great build!
Thank you!
True ... color correction makes wounders
Bro, everything is fine, but for the soldering part, include more flux and the finish of the soldering should be round mirror finish, like you need to be able to see your face in it. cover more surface area as possible and immerse the wire conductor as much as possible into the solder.
Many thanks for your tips. Unfortunately, my solder joints really don't look that good. But I'll try again with more flux. Do I have to desolder the areas first, or can I simply apply more flux and re-solder?
@@fpv-geek You could add flux on the existing joint, and add some more lead. But for a clean build, remove all the solder joint and re tin then solder again with flux. Mr.steele has made a video specifically on this. it can clarify all of our doubts regarding soldering.
@@lokaero Many thanks for your tips. I will try to re-solder it
Dude Flux
You mean soldering?
@@fpv-geek yes, for the solder, everything else looks great though. thanks for the video :)
Thank you! Yes, I have already ordered flux and will re-solder it. Thanks for your tips.
Great result ....
Thank you 🤩
galaxy props look better imo
Thank you
great video love you sir from bangladesh. i just want to how do i can buy a used Radiomaster boxer radio? very cheap price?
Thank you very much. You can have a look on ebay to see if there are any available.
Hey man. I know there is a ton of information online on what to buy when getting into FPV. I live in Germany too. I have a budget of 1.5 - 2k. What would you recoomend me to buy (also equipment to build)?
Want to get started with a 5-inch FPV drone? There are ready-made sets to buy. You'll get there with your budget. Otherwise, look for a Tinywhoop set. Like the Cetus X from BetaFPV. That's what I started with. I also have a crash compilation on my channel of this drone. Such sets are available for around 300-400€. They're all good for getting started in the hobby ☺ If you have any questions, just let me know.
Is that through dji camera? I have the same drone in green with different parts that’s yours.
One scene was shot with an Insta360 go2. The green would have been nice too, but I was afraid that it would make them harder to find in the tall grass. 😄
@@fpv-geek yep that’s true I have to rely on the beeper to find mine in grass lol
🔥🔥nice flight
Nice
Wow! 🌳
Nice
Nice
Nice build! Which parts did you use?
Thank you☺️ GEPRC Mark5 DC, DJI O3, ELRS, Velox V3 2207 2050kv, SpeedyBee F405 V4
Nice
Wow! 🌼
Beautiful ❤
Dang
Nice
What drone do you ise
AOS 3.5 and GEPRC Mark5 DC
Dang good job
thx
Perfect 👌🏻
Smooth flight ! Nice
Very nice
Looks dizzy lol
haha, yes
💥💥💥
Nice spot
chillig 😏