Exploring the art and science of flicking a knife open and then closing it and then doing it again...and other stuff about knives and maybe other stuff about EDC gear too.
Love that they delete the stupid lanyard hole. Just ordered the same set 🍻
@ChalupaBatman111 сағат бұрын
I'm gonna blade swap my m4 tenacious whenever mine comes in
@MitchBolligКүн бұрын
Thanks for a nice cover of this new and interesting deviation from CS's stable..and I agree with you on the ticonnectors being much better. 👊🤙
@WallachGamingКүн бұрын
How's the lockup on yours?
@bladecentered2264Күн бұрын
Solid!
@Kris_StilettoКүн бұрын
That is sweet! :-) Peace, Stiletto :-)
@hostygallardo6012 күн бұрын
The only fucked up thing about this knife is the thumb studs. My thumb is all messed up thanks to that stupid idea of having it pointed. I would change the color to red
@joshuaricks78822 күн бұрын
Nice boots, I prefer Nick’s myself 👍
@bladecentered22642 күн бұрын
Yeah Nick's are top tier!
@joshuaricks78822 күн бұрын
@@bladecentered2264 I’ve been tieing my boots the wrong way, am glad I stumbled across your video 🙏
@benhicks13923 күн бұрын
What brand of boots?
@bladecentered22642 күн бұрын
Drew's Boots
@bigglock54783 күн бұрын
Fuck I just ordered a 200$ knife. Guess I’ll order another one!
@bladecentered22643 күн бұрын
It happens lol
@RobinsonOhio3 күн бұрын
This and the Demko shark cub that will be 60$ are gonna sell a ton
@JROTCBALL4 күн бұрын
I already have the Lynch NW clip on the way, hope to find out if it’s one of the better ones, I have always loved their clips on my spydercos
@MPerry-ox9qb4 күн бұрын
Cold Steel hasn’t made a winner for over a decade. I’m probably going to pick this one up.
@andreykotovsky4 күн бұрын
No way, cold steel finally made something pretty, and not looking like 3 bucks chinese shiet?
@agitodclxvi5 күн бұрын
what's 9:36 thumbstud model? tie connector?
@bladecentered22644 күн бұрын
Yup Ti connector
@notfixingit4 күн бұрын
@@bladecentered2264can you provide a link to which model, they have several
@aleksgogol30075 күн бұрын
გუშინ ვნახე უმაგრესია
@datboisnoiceofficial47855 күн бұрын
Does it have a steel lock bar insert to keep the blade off the titanium? Also have you experienced any lock stick or lock rock?
@bladecentered22645 күн бұрын
Yes it does have a steel insert. No lock stick or rock
@datboisnoiceofficial47854 күн бұрын
@@bladecentered2264 I think I’m gonna pick up one and swap the blade for an s35vn one.. we’ll see though
@ChalupaBatman111 сағат бұрын
@datboisnoiceofficial4785 my brother in grace I just picked one up to blade swap with my m4 brown g10 one. You're also a genius
@thepugilist43795 күн бұрын
Great video, man. I’d never guessed that’s a Cold Steel…Thx for the breakdown🔪🔪🔪
@WallachGaming5 күн бұрын
Can I ask how the detent is on this one? Some of these Atlas locks have pretty weak detents like some crossbar lock stuff (like the Deka for example).
@bladecentered22645 күн бұрын
This one is perfect
@FerretChloride5 күн бұрын
Yeah that’s a winner.
@sloanNYC5 күн бұрын
It is very weird at first because it is sooooo thin compared to "normal" knives. I bet a polished handle version would sell really well too.
@protomon5 күн бұрын
is it not out? I can't find it
@bladecentered22645 күн бұрын
It's only on the cold Steel website for now I think
@protomon5 күн бұрын
Why can't I find this knife anywhere?
@bladecentered22645 күн бұрын
Check cold Steel website
@timothy95965 күн бұрын
Big time bummer that it's T6 on the body screws. The only screws I've ever stripped are T6 which is why I won't spend my money on a knife that has them, except on the clip which still sucks. I can't even fathom why companies are still using them when the entire community has said they need to be T8 for years.
@fredp19836 күн бұрын
I saw this thing on some bladeshow videos... Im liking it alot... but WHERE did you get one??? I cant find it anywhere... and how much!??
@bladecentered22646 күн бұрын
Cold steel's website. $199
@priority26 күн бұрын
Not the same as the Demko Shark lock…quite a bit different actually
@EnriqueScott-se3vp6 күн бұрын
I remember years ago when I started buying pocket knives before EDC lol they were very expensive and they were just pocket knives no clips when they finally put a clip on it they were literally fall off Cold Steel I paid $79 Voyager this was back in late 80 s and I EDC in Chef pants I return it three times in a year and 2 months call tio send me a letter saying third time would be the last time and that was the last year that I purchased a cold steel
@EnriqueScott-se3vp6 күн бұрын
And the price
@bladecentered22646 күн бұрын
$199
@justthetipedc78356 күн бұрын
Got this one in 2 days ago and it’s freaking amazing, it’s my only cold steel model.
@BrentonCarr6 күн бұрын
me likey
@MatthewdePaula6 күн бұрын
Thanks for the disassembly video. I was wondering why the big cutout in the heel of the blade and as suspected, it's to fit the lock-bar mechanism when the blade is folded in the handle. Production quality looks top-notch. You can see they scalloped the blade tang to meet up with the stop pin for more/better contact. Really good. These are Taiwan-made if I recall correctly. Also, I actually like this lock design better than the Shark Lock because the pull tab is completely out of the way. This knife really has a lot going for it, including the uncomplicated design aesthetic. Would be interesting if they did a version with thinner blade stock and slightly thicker handle scales, maybe in G10, and at a lower price point.
@bosrey78076 күн бұрын
Who carries these?
@WallachGaming5 күн бұрын
The black one is in stock on Cold Steel's website right now. Satin one is still out of stock.
@tgonzalez19836 күн бұрын
Looks nice. Is there a lanyard pin on it? Blade play?
@bladecentered22646 күн бұрын
No place for a lanyard. No blade play at all!
@tgonzalez19836 күн бұрын
Cool. How about blade stock thickness?
@nathanwhite56027 күн бұрын
That is nice
@chucknunface7 күн бұрын
Regrind?
@bladecentered22647 күн бұрын
Yup, great performer now!
@chucknunface7 күн бұрын
@bladecentered2264 that's sicc. Who did the work?
@bladecentered22647 күн бұрын
@@chucknunface BGM knives on Instagram
@chucknunface7 күн бұрын
@@bladecentered2264 he does good work. I've had a couple regrinds and a fixed from him.
@Aaronrjasso7 күн бұрын
Got my launch 20 for $108 🤘🏼
@Shambley17 күн бұрын
This thing looks sweet. Might have just found me a new EDC.
@Narrow_Gate_Forge7 күн бұрын
Link for the pocket clip?
@bladecentered22647 күн бұрын
Look what I found on Etsy: www.etsy.com/listing/909725942/black-titanium-deep-carry-pocket-clip?ref=share_v4_lx
@tacmechanic8 күн бұрын
What is the blade thickness? Dont see it listed? Inassume its .125
@bladecentered22647 күн бұрын
It's .11"
@pooslinger68398 күн бұрын
I am getting one. I neeed one. And it runs on washers?! Almost too good to be true. It’s actually made to do work
@WallachGaming5 күн бұрын
Right? Where did this design even come from, suddenly Cold Steel has one of the best slim EDC designs on the market?
@SparrowAg8 күн бұрын
Agree, Good Recomendation
@calebwinslow59179 күн бұрын
Is it on bearings or washers?
@bladecentered22648 күн бұрын
Washers
@mynamesjeff3479 күн бұрын
Did I miss when these are gonna be available? I have to snag one of these
@bladecentered22649 күн бұрын
I got it directly from the cold Steel website, not sure when they'll be at dealers
@virgilbarnett37706 күн бұрын
How long did it take to receive after placing your order with Cold Steel? Thanks much.
@bladecentered22646 күн бұрын
@@virgilbarnett3770 not too long, maybe four days
@TripleEEDC9 күн бұрын
Great comparison!
@agitodclxvi10 күн бұрын
what is the measurement for the scale's width? Cold steel website don't have that
@bladecentered22649 күн бұрын
It's .32" inches thick/ 8mm
@agitodclxvi9 күн бұрын
@@bladecentered2264 wow that is even thinner than bugout!!
@Foodiedad1710 күн бұрын
I was surprised how good this looked/looks when I saw Stassa’s video. I’m watching this on silent currently. Is this China made or Taiwan?
@manofgod625010 күн бұрын
Taiwan
@mynamesjeff3479 күн бұрын
I'm excited for this too after seeing stassas video
@dan_taninecz_geopol5 күн бұрын
@@manofgod6250🇹🇼🇹🇼🇹🇼 Taiwan is amazing.
@derekwedge0910 күн бұрын
Where do you get thumbstuds with a TI connector? Is there an aftermarket clip that would match those thumbstuds and is the current clip titanium? Thank you!
@bladecentered22649 күн бұрын
Yeah the thumb studs are from Ti connector. The clip is stainless
@derekwedge099 күн бұрын
@@bladecentered2264 dope thank you
@edrader10 күн бұрын
weight?
@bladecentered226410 күн бұрын
3.8ozs
@mcsquirgle11 күн бұрын
This is not what I expected from Cold Steel. It's slim
@MrEddy41111 күн бұрын
Man i need one
@nachocheese338212 күн бұрын
Okay you and I both know you should have reached that initial deployment. Lol
Пікірлер
Love that they delete the stupid lanyard hole. Just ordered the same set 🍻
I'm gonna blade swap my m4 tenacious whenever mine comes in
Thanks for a nice cover of this new and interesting deviation from CS's stable..and I agree with you on the ticonnectors being much better. 👊🤙
How's the lockup on yours?
Solid!
That is sweet! :-) Peace, Stiletto :-)
The only fucked up thing about this knife is the thumb studs. My thumb is all messed up thanks to that stupid idea of having it pointed. I would change the color to red
Nice boots, I prefer Nick’s myself 👍
Yeah Nick's are top tier!
@@bladecentered2264 I’ve been tieing my boots the wrong way, am glad I stumbled across your video 🙏
What brand of boots?
Drew's Boots
Fuck I just ordered a 200$ knife. Guess I’ll order another one!
It happens lol
This and the Demko shark cub that will be 60$ are gonna sell a ton
I already have the Lynch NW clip on the way, hope to find out if it’s one of the better ones, I have always loved their clips on my spydercos
Cold Steel hasn’t made a winner for over a decade. I’m probably going to pick this one up.
No way, cold steel finally made something pretty, and not looking like 3 bucks chinese shiet?
what's 9:36 thumbstud model? tie connector?
Yup Ti connector
@@bladecentered2264can you provide a link to which model, they have several
გუშინ ვნახე უმაგრესია
Does it have a steel lock bar insert to keep the blade off the titanium? Also have you experienced any lock stick or lock rock?
Yes it does have a steel insert. No lock stick or rock
@@bladecentered2264 I think I’m gonna pick up one and swap the blade for an s35vn one.. we’ll see though
@datboisnoiceofficial4785 my brother in grace I just picked one up to blade swap with my m4 brown g10 one. You're also a genius
Great video, man. I’d never guessed that’s a Cold Steel…Thx for the breakdown🔪🔪🔪
Can I ask how the detent is on this one? Some of these Atlas locks have pretty weak detents like some crossbar lock stuff (like the Deka for example).
This one is perfect
Yeah that’s a winner.
It is very weird at first because it is sooooo thin compared to "normal" knives. I bet a polished handle version would sell really well too.
is it not out? I can't find it
It's only on the cold Steel website for now I think
Why can't I find this knife anywhere?
Check cold Steel website
Big time bummer that it's T6 on the body screws. The only screws I've ever stripped are T6 which is why I won't spend my money on a knife that has them, except on the clip which still sucks. I can't even fathom why companies are still using them when the entire community has said they need to be T8 for years.
I saw this thing on some bladeshow videos... Im liking it alot... but WHERE did you get one??? I cant find it anywhere... and how much!??
Cold steel's website. $199
Not the same as the Demko Shark lock…quite a bit different actually
I remember years ago when I started buying pocket knives before EDC lol they were very expensive and they were just pocket knives no clips when they finally put a clip on it they were literally fall off Cold Steel I paid $79 Voyager this was back in late 80 s and I EDC in Chef pants I return it three times in a year and 2 months call tio send me a letter saying third time would be the last time and that was the last year that I purchased a cold steel
And the price
$199
Got this one in 2 days ago and it’s freaking amazing, it’s my only cold steel model.
me likey
Thanks for the disassembly video. I was wondering why the big cutout in the heel of the blade and as suspected, it's to fit the lock-bar mechanism when the blade is folded in the handle. Production quality looks top-notch. You can see they scalloped the blade tang to meet up with the stop pin for more/better contact. Really good. These are Taiwan-made if I recall correctly. Also, I actually like this lock design better than the Shark Lock because the pull tab is completely out of the way. This knife really has a lot going for it, including the uncomplicated design aesthetic. Would be interesting if they did a version with thinner blade stock and slightly thicker handle scales, maybe in G10, and at a lower price point.
Who carries these?
The black one is in stock on Cold Steel's website right now. Satin one is still out of stock.
Looks nice. Is there a lanyard pin on it? Blade play?
No place for a lanyard. No blade play at all!
Cool. How about blade stock thickness?
That is nice
Regrind?
Yup, great performer now!
@bladecentered2264 that's sicc. Who did the work?
@@chucknunface BGM knives on Instagram
@@bladecentered2264 he does good work. I've had a couple regrinds and a fixed from him.
Got my launch 20 for $108 🤘🏼
This thing looks sweet. Might have just found me a new EDC.
Link for the pocket clip?
Look what I found on Etsy: www.etsy.com/listing/909725942/black-titanium-deep-carry-pocket-clip?ref=share_v4_lx
What is the blade thickness? Dont see it listed? Inassume its .125
It's .11"
I am getting one. I neeed one. And it runs on washers?! Almost too good to be true. It’s actually made to do work
Right? Where did this design even come from, suddenly Cold Steel has one of the best slim EDC designs on the market?
Agree, Good Recomendation
Is it on bearings or washers?
Washers
Did I miss when these are gonna be available? I have to snag one of these
I got it directly from the cold Steel website, not sure when they'll be at dealers
How long did it take to receive after placing your order with Cold Steel? Thanks much.
@@virgilbarnett3770 not too long, maybe four days
Great comparison!
what is the measurement for the scale's width? Cold steel website don't have that
It's .32" inches thick/ 8mm
@@bladecentered2264 wow that is even thinner than bugout!!
I was surprised how good this looked/looks when I saw Stassa’s video. I’m watching this on silent currently. Is this China made or Taiwan?
Taiwan
I'm excited for this too after seeing stassas video
@@manofgod6250🇹🇼🇹🇼🇹🇼 Taiwan is amazing.
Where do you get thumbstuds with a TI connector? Is there an aftermarket clip that would match those thumbstuds and is the current clip titanium? Thank you!
Yeah the thumb studs are from Ti connector. The clip is stainless
@@bladecentered2264 dope thank you
weight?
3.8ozs
This is not what I expected from Cold Steel. It's slim
Man i need one
Okay you and I both know you should have reached that initial deployment. Lol
Lol yeah that was totally my bad