Trucks looking great 👍🏽really like the gauge cluster very nice. 👍🏽. I’m putting together a 63 . Longbed Fleetside. youtube.com/@theoldfartsgarage?si=V1JN7hCxE5nU3J2v
@tnfiftyfives3 күн бұрын
newer cars are hell to work on
@Twistedleafrodshop3 күн бұрын
@@tnfiftyfives yeah nothing like the classics!
@heybobalou1004 күн бұрын
I’m liking these new videos, not as boring as your old stuff
@Twistedleafrodshop4 күн бұрын
Thanks! Trying to be more entertaining!
@bamaknifeguy4 күн бұрын
Hahaha. Back when vehicles Actually had enough room to hop in, close the hood and get to work. lol 😂
@Twistedleafrodshop4 күн бұрын
@@bamaknifeguy almost could’ve fit another person too lol
@thebiochemist25926 күн бұрын
it really do be like that sometimes
@Twistedleafrodshop6 күн бұрын
@@thebiochemist2592 it do be
@thomasbarlow42236 күн бұрын
Long as you crank that welder up all the way, it works pretty good
@Twistedleafrodshop6 күн бұрын
@@thomasbarlow4223 yeah I’ve had them before where they take a few tries but this one came out first try
@user-hg5fm2id8e8 күн бұрын
Those pulleys are going to work with that bracket
@Twistedleafrodshop8 күн бұрын
@@user-hg5fm2id8e had to trim that little bit that you saw in the video and will need to change the spacing on the alternator but should work fine
@tokslut11 күн бұрын
why not just make the holes elongated ;)
@Twistedleafrodshop11 күн бұрын
What holes?
@tokslut11 күн бұрын
@@Twistedleafrodshop @5:12
@Twistedleafrodshop11 күн бұрын
@@tokslutoh! I just liked this idea better I guess
@LP-ok9rl12 күн бұрын
i’m getting the vapors 😂
@Twistedleafrodshop12 күн бұрын
@@LP-ok9rl lol I’m glad someone liked that one
@nsup0710912 күн бұрын
How tight would be the sway bar link bolts?
@Twistedleafrodshop12 күн бұрын
@@nsup07109 they usually have a lock nut, get it past the lock at least but for the sway bar to work correctly they should be as tight as you can get them
@isaiahhoffer950714 күн бұрын
Perfect ❤
@Twistedleafrodshop14 күн бұрын
Yeah it was a good time!
@jonvanderploeg662916 күн бұрын
Get to the point
@Twistedleafrodshop16 күн бұрын
@@jonvanderploeg6629 thank you for feedback, I’ve been working on it with my newer videos!
@heybobalou10018 күн бұрын
I like the designs, might have to get me a hat
@Twistedleafrodshop18 күн бұрын
Get ya one!
@hzxnmc18 күн бұрын
americans🤮
@mariannegrandmont984518 күн бұрын
😂😅lol 😆 🤣 😂
@Twistedleafrodshop18 күн бұрын
Looks great right? 😉😂😂
@heybobalou10018 күн бұрын
Looks terrible in the middle
@Twistedleafrodshop18 күн бұрын
@@heybobalou100 your mom looked terrible in the middle when I was done with her
@theterminator840525 күн бұрын
Badass truck but ugly ass front end you need to do a circle light conversion put 70s front end
@Twistedleafrodshop25 күн бұрын
@@theterminator8405 totally agree, the front end looked terrible!
@ZachHawley9226 күн бұрын
Very well done
@Twistedleafrodshop24 күн бұрын
Thank you very much!
@heybobalou10026 күн бұрын
Those bags look like they’re for a mini truck
@Twistedleafrodshop26 күн бұрын
@@heybobalou100 yeah I wasn’t happy with them, I ordered some bigger ones for it
@zipie15Ай бұрын
who names something big bootie co💀💀😭😭
@TwistedleafrodshopАй бұрын
Haha don’t ask me!
@msladebeatzАй бұрын
Great content!! I'm seeing this 2 years afterwards. I'm interested in a parts kit if you're still able to share.
@TwistedleafrodshopАй бұрын
Unfortunately no kit, but thanks for watching!
@Six6FitАй бұрын
Dope! Did you ever drop a jig video? I think I can see it well enough to freestyle it if you haven’t
@TwistedleafrodshopАй бұрын
No I ended up having to sell off most of my stuff, basically make a ramp, flip it over and then build the jig off the back of it
@Six6FitАй бұрын
@@Twistedleafrodshop thanks man 🫡 keep it up!
@isaacabram2423Ай бұрын
WOOOO take that girl to the prom looking that good
@TwistedleafrodshopАй бұрын
Take your mom to prom last night
@heybobalou100Ай бұрын
Won’t make it any quieter
@TwistedleafrodshopАй бұрын
It’ll help, mostly just wanted it all the be “finished” takes the build to the next level
@heybobalou100Ай бұрын
Starting to coming together, I’m ready to see this thing back together
@TwistedleafrodshopАй бұрын
Soon…. Soon
@TM-fx5leАй бұрын
Why ur head so big
@TwistedleafrodshopАй бұрын
Cause my brains big! You wouldn’t know……
@barthonshul8127Ай бұрын
I don't know which has bigger heads in it that engine, or a hat if dude was wearing one😅
@TwistedleafrodshopАй бұрын
Hey I’m proud of my 6 head!
@ejayjones5Ай бұрын
Nice build, how much would you charge for the kit?
@TwistedleafrodshopАй бұрын
Unfortunately I don’t have the ability to make the kits anymore
@isaacabram2423Ай бұрын
Through the bed!
@TwistedleafrodshopАй бұрын
Yeah I’m liking through the bed too
@BirdyFabАй бұрын
Agreed. That thing sounds pretty dang good too.
@TwistedleafrodshopАй бұрын
@@BirdyFab thank ya! Can’t wait to get it on the road!
@heybobalou100Ай бұрын
Sounds rowdy!
@TwistedleafrodshopАй бұрын
Yeah it does!!
@fsu3784Ай бұрын
Best feeling ever
@TwistedleafrodshopАй бұрын
I felt pretty damn good that’s for sure!
@pilchermtАй бұрын
Sounds awesome!
@pilchermtАй бұрын
What mufflers are those? Cam?
@TwistedleafrodshopАй бұрын
@@pilchermt thank you! These are just some no name stainless 2.5 mufflers off Amazon, and I’m not sure on the cam to be honest with you, I picked the motor up used and haven’t torn into it yet
@jbheinz8944Ай бұрын
No such thing as a "nas" car. It's not a national association of stock car. It is a national association of stock car racing... car. Sorry it's a pet peeve and side note I don't even like Nascar.
@TwistedleafrodshopАй бұрын
Thanks for the comment!
@lilfaded....1400Ай бұрын
Yup, just how you said it😂👍🏼
@TwistedleafrodshopАй бұрын
Basically said it perfect right? Lol
@lilfaded....1400Ай бұрын
@@Twistedleafrodshop thought he was doing it for the motor when he started, 🤣👍🏼
@happymauiАй бұрын
Swifflepolppers
@TwistedleafrodshopАй бұрын
Not sure what that means but thanks for watching!
@heybobalou100Ай бұрын
That seat looks like it was made for the truck!
@TwistedleafrodshopАй бұрын
Hey thanks! I like it a lot better than the grey one!
@heybobalou100Ай бұрын
Man I didn’t think it was that easy!
@TwistedleafrodshopАй бұрын
Oh yeah that big sidewall is easy to do, when you get into those low profiles tires it’s a bit tougher
@heybobalou100Ай бұрын
@@Twistedleafrodshop you said you were using a flat head screw driver?
@TwistedleafrodshopАй бұрын
@@heybobalou100 yep! A long decent sized flat head, harbor freight sells tires spoons for cheap though if you’re wanting to try it yourself
@TwistedleafrodshopАй бұрын
@@heybobalou100 yep! A long decent sized flat head, harbor freight sells tires spoons for cheap though if you’re wanting to try it yourself
@dillonworkman3252Ай бұрын
What do those wheels and tires go to?
@ZachHawley92Ай бұрын
Gotta love those ankle vents
@TwistedleafrodshopАй бұрын
Yeah now it’s gonna get hot in there…..
@dillonworkman3252Ай бұрын
Is that a back seat?
@TwistedleafrodshopАй бұрын
It is! Out of like a 2014-2018 gm truck
@heybobalou100Ай бұрын
I thought it looked familiar!
@heybobalou100Ай бұрын
Column looks good
@TwistedleafrodshopАй бұрын
Thanks!
@BirdyFabАй бұрын
I like the engine choice. The stock engine in my 62 is seized, and I've been thinking of swapping in a 4.2l I6 just to be different.
@TwistedleafrodshopАй бұрын
I actually end up changing this in a newer video, still would’ve been cool to run this engine though!
@heybobalou100Ай бұрын
Looks good to me!
@TwistedleafrodshopАй бұрын
Thanks!
@heybobalou100Ай бұрын
@@Twistedleafrodshop when do we get back to the chassis videos?
@TwistedleafrodshopАй бұрын
@@heybobalou100 it’ll be soon! Finally got some headers
@heybobalou100Ай бұрын
@@Twistedleafrodshop can’t wait, I’m ready to see this thing on the road
@TwistedleafrodshopАй бұрын
@@heybobalou100 it’ll be a little while before it’s on the road but I’m making the exhaust video right now and I’ll be on the chassis for a little while
@dillonworkman32522 ай бұрын
Once you get the floor and surrounding panels seam sealed. We should take it to work and we can use a sprayable under coat and do the underside and the inside of the cab. I think it will be a better option than bed liner. Plus it comes in a different colors and I think will have better heat dissipation and nvh qualities. I think we can get white, beige, grey, or black.
@Twistedleafrodshop2 ай бұрын
I’ll think about it!
@heybobalou1002 ай бұрын
Should’ve just bought the patch panels
@Twistedleafrodshop2 ай бұрын
Why do you say that?
@heybobalou1002 ай бұрын
@@Twistedleafrodshop it would have been easier
@Twistedleafrodshop2 ай бұрын
@@heybobalou100 yeah maybe but all the patch panels for these pieces would’ve been a couple hundred and I don’t have the budget for that
@heybobalou100Ай бұрын
@@Twistedleafrodshop yeah I guess but it would’ve been worth it in the end
@heybobalou1002 ай бұрын
Looks terrible
@Twistedleafrodshop2 ай бұрын
Yeah, I know, but it’s strong!!
@heybobalou100Ай бұрын
@@Twistedleafrodshop yeah I guess that’s true, it’ll be under carpet anyway
Пікірлер
Trucks looking great 👍🏽really like the gauge cluster very nice. 👍🏽. I’m putting together a 63 . Longbed Fleetside. youtube.com/@theoldfartsgarage?si=V1JN7hCxE5nU3J2v
newer cars are hell to work on
@@tnfiftyfives yeah nothing like the classics!
I’m liking these new videos, not as boring as your old stuff
Thanks! Trying to be more entertaining!
Hahaha. Back when vehicles Actually had enough room to hop in, close the hood and get to work. lol 😂
@@bamaknifeguy almost could’ve fit another person too lol
it really do be like that sometimes
@@thebiochemist2592 it do be
Long as you crank that welder up all the way, it works pretty good
@@thomasbarlow4223 yeah I’ve had them before where they take a few tries but this one came out first try
Those pulleys are going to work with that bracket
@@user-hg5fm2id8e had to trim that little bit that you saw in the video and will need to change the spacing on the alternator but should work fine
why not just make the holes elongated ;)
What holes?
@@Twistedleafrodshop @5:12
@@tokslutoh! I just liked this idea better I guess
i’m getting the vapors 😂
@@LP-ok9rl lol I’m glad someone liked that one
How tight would be the sway bar link bolts?
@@nsup07109 they usually have a lock nut, get it past the lock at least but for the sway bar to work correctly they should be as tight as you can get them
Perfect ❤
Yeah it was a good time!
Get to the point
@@jonvanderploeg6629 thank you for feedback, I’ve been working on it with my newer videos!
I like the designs, might have to get me a hat
Get ya one!
americans🤮
😂😅lol 😆 🤣 😂
Looks great right? 😉😂😂
Looks terrible in the middle
@@heybobalou100 your mom looked terrible in the middle when I was done with her
Badass truck but ugly ass front end you need to do a circle light conversion put 70s front end
@@theterminator8405 totally agree, the front end looked terrible!
Very well done
Thank you very much!
Those bags look like they’re for a mini truck
@@heybobalou100 yeah I wasn’t happy with them, I ordered some bigger ones for it
who names something big bootie co💀💀😭😭
Haha don’t ask me!
Great content!! I'm seeing this 2 years afterwards. I'm interested in a parts kit if you're still able to share.
Unfortunately no kit, but thanks for watching!
Dope! Did you ever drop a jig video? I think I can see it well enough to freestyle it if you haven’t
No I ended up having to sell off most of my stuff, basically make a ramp, flip it over and then build the jig off the back of it
@@Twistedleafrodshop thanks man 🫡 keep it up!
WOOOO take that girl to the prom looking that good
Take your mom to prom last night
Won’t make it any quieter
It’ll help, mostly just wanted it all the be “finished” takes the build to the next level
Starting to coming together, I’m ready to see this thing back together
Soon…. Soon
Why ur head so big
Cause my brains big! You wouldn’t know……
I don't know which has bigger heads in it that engine, or a hat if dude was wearing one😅
Hey I’m proud of my 6 head!
Nice build, how much would you charge for the kit?
Unfortunately I don’t have the ability to make the kits anymore
Through the bed!
Yeah I’m liking through the bed too
Agreed. That thing sounds pretty dang good too.
@@BirdyFab thank ya! Can’t wait to get it on the road!
Sounds rowdy!
Yeah it does!!
Best feeling ever
I felt pretty damn good that’s for sure!
Sounds awesome!
What mufflers are those? Cam?
@@pilchermt thank you! These are just some no name stainless 2.5 mufflers off Amazon, and I’m not sure on the cam to be honest with you, I picked the motor up used and haven’t torn into it yet
No such thing as a "nas" car. It's not a national association of stock car. It is a national association of stock car racing... car. Sorry it's a pet peeve and side note I don't even like Nascar.
Thanks for the comment!
Yup, just how you said it😂👍🏼
Basically said it perfect right? Lol
@@Twistedleafrodshop thought he was doing it for the motor when he started, 🤣👍🏼
Swifflepolppers
Not sure what that means but thanks for watching!
That seat looks like it was made for the truck!
Hey thanks! I like it a lot better than the grey one!
Man I didn’t think it was that easy!
Oh yeah that big sidewall is easy to do, when you get into those low profiles tires it’s a bit tougher
@@Twistedleafrodshop you said you were using a flat head screw driver?
@@heybobalou100 yep! A long decent sized flat head, harbor freight sells tires spoons for cheap though if you’re wanting to try it yourself
@@heybobalou100 yep! A long decent sized flat head, harbor freight sells tires spoons for cheap though if you’re wanting to try it yourself
What do those wheels and tires go to?
Gotta love those ankle vents
Yeah now it’s gonna get hot in there…..
Is that a back seat?
It is! Out of like a 2014-2018 gm truck
I thought it looked familiar!
Column looks good
Thanks!
I like the engine choice. The stock engine in my 62 is seized, and I've been thinking of swapping in a 4.2l I6 just to be different.
I actually end up changing this in a newer video, still would’ve been cool to run this engine though!
Looks good to me!
Thanks!
@@Twistedleafrodshop when do we get back to the chassis videos?
@@heybobalou100 it’ll be soon! Finally got some headers
@@Twistedleafrodshop can’t wait, I’m ready to see this thing on the road
@@heybobalou100 it’ll be a little while before it’s on the road but I’m making the exhaust video right now and I’ll be on the chassis for a little while
Once you get the floor and surrounding panels seam sealed. We should take it to work and we can use a sprayable under coat and do the underside and the inside of the cab. I think it will be a better option than bed liner. Plus it comes in a different colors and I think will have better heat dissipation and nvh qualities. I think we can get white, beige, grey, or black.
I’ll think about it!
Should’ve just bought the patch panels
Why do you say that?
@@Twistedleafrodshop it would have been easier
@@heybobalou100 yeah maybe but all the patch panels for these pieces would’ve been a couple hundred and I don’t have the budget for that
@@Twistedleafrodshop yeah I guess but it would’ve been worth it in the end
Looks terrible
Yeah, I know, but it’s strong!!
@@Twistedleafrodshop yeah I guess that’s true, it’ll be under carpet anyway
It doesn't have to be pretty to be functional
Wooo hooo!
I like the old school motor!
Thanks!
Looks good
Thank you!