Welcome to The BIM Coordinator KZread channel! As an expert in the field of BIM and design technology, I'm here to help both newcomers and seasoned professionals excel in their careers. On this channel, you'll find valuable insights on a wide range of tools and processes, such as Revit, Navisworks, Python, and Dynamo. Though my primary focus is on these tech stacks, I occasionally delve into other topics and workflows, including BIM management, InfraWorks, and AutoCAD. The realm of BIM coordination is vast and brimming with opportunities to explore, and I encourage you to absorb as much knowledge as possible and never shy away from asking questions. Let me be your trusted guide on this exciting journey, as you carve your own unique path in the world of BIM coordination.
Пікірлер
Sir I made a bricks pattern in a wall. In shaded viewport I can't select the pattern for rotating.. sir plzz solve my problem
...that is all great when you are already skilled programmer, but what if you are beginner, how would you then set up your template, because as a beginner you will do more fails than wrtting clean codes in a matter of second? any suggestions?, thank you
Is it necessary to perform this step in order to create custom dynamo node using python? also if I understood correctly those two locations for module that you have written in first three lines are for like you said organisational purposes?, so what is all in between first two lines of codes and that last one where you typing OUT....? how is that relevant (all thise lines in between to all what you've presented in this video?, sorry if you are going to repeat some staff again but if you could explain little bit more in broader picture how did you set up all that and like break that in smaller parts?
Hi, can you tell me, i am unable to find some nodes , so can you help me for find the package that need to get the node .thank you
OMG pls prepare a scrypt before recording, this video coulded lastet 6 minutes.
Can we link dwg files directly using ACC or we should also have to have ADC?
I am not sure. I'd assume your could for 2023+ models but I'd have to test that out. Let me know if you get a chance to try it.
And how can I change it to a non-shared one in the family itself?
Does not work in Revit 2021 or 2022
Thanks for the shared materials...
Thanks for the video.
thanks for your video. Where can I find the script for replace shared parameter with family parameter? Thanks
can save this xml files and upload? i did before but it was always lost my sets and profiler…
can generate a 3d viewer in power bi of the 3d view of a Revit file in BIM360?
I was searching for a way to learn how loop node actually works and by your video, I understand the logic behind it. Thank you for uploading it. I was thinking of using looping node for getting analysis results in different situations. to decrease the manual work. I will work on it if I manage to make it I hope I'll update it here.
How to get the power point
it is helpful thanks
Hlo Sir Bluebeam Software download link send me please
helped lots, thank you
Thanks for the video, was super helpful. I'm just curious especially cause of the data size of bigger point clouds, woulnd't it just be easier to set a common zero for the project and then cut it into pieces so instead of creating those layers more ore less export them as their own .rcp-files? If you then just upload into revit what you need it will still all be in the same coordinate system. Or is my method flaud? I dont try to be a smartass here im just curious since im still learning with ReCap^^
peace for you ..i hope to get solution for the problem you have mention which is dynamo order the selected elements as by Ids ..my Question is how we re order it by starting element
There isn't a way to change the selection order far as I know but you can use a different method for getting the order of the selection which is using the connection points and a start and end.
Not working to slow
life saver.
Thanks for sharing! I know the basics of Python but not well enough to efficiently write scripts. So the other day I asked ChatGPT to write me a script to randomize some names and send out an email. It did a good job and then with my limited knowledge base was able to get it to a spot where it did what I wanted. I'm excited its there to help me out.
Yes, it is a wonderful tool. I use it all the time to update my existing scripts that I haven't had time to update. In the applications I am building, I use co-pilot to speed up my development, but I don't let it write whole functions/methods.
Thanks for sharing... Love it... I am a BIM engineer.. Right now i trying to integrate BIM model, speckle, and power BI for project measures system in my project.. It would be great if you can share about it.. I am struggling to make a system of it.. 😢😢
What kind of information are you trying to show in powerbi?
@@TheBIMCoordinator The information I want to display includes earned value KPIs such as SPI, CPI, and others, which I obtained from schedule tracking in Microsoft Project. I want to make it real-time is that possible?
Idk much about Microsoft Project but if the data is available it should be possible. I connect all sorts of data together across different systems. Sometimes they require different approaches. Like sometimes there isn't an api for direct data queries but there is a way to schedule downloads of Excel, which you can easily tie into PowerBI. It is hard to say though if what you want can actually be done. Good luck! Let me know how it goes for you!
Thanks for the clip! For me, it did not work in the 2.19 folder, only in the 2.13 folder!
This explanation is great, but man I had to skip 6 minutes for you to get to the point... in a 10 minutes video. I think anyone interested in this video should know what a nested family is, no need for explanations
100% agree Dalton, even with particular options on ACC where it can only be switched on and set once on a project like the ISO-STANDARD NAMING CONVENTION or choosing the main coordination space folder these types of irreversible options on live projects can be daunting if you are not 100% sure of its ramifications and potential impact to a project.
😘 thanks ♥️
Do you know if model and weights are available?
Can you share a link to download this addin, please ?
How about the dyn, can you share that? I'm new to dynamo. And new to revit haha but some of my coworkers are pros in it. My company would be willing to pay for a [something] that can automate the process of extracting smart rooms (or spaces) from 2D cad for use in Revit. We are an MEP firm and a few of our architect clients still use CAD and it's an extremely expensive, time-intensive process to manually do room tags on large buildings
NICE
totally agree!!! do hope factory can hear you. i used ACC and APS for quite some time, having same issues, for instance, you need account admin right to integrate APS app into ACC which is kind of risky before fully tested. for trial version of both ACC and APS, you need to register Autodesk account w/ (new) email address, why not let user using same email address after expired (Autodesk can simply delete all data)? so user won't have to create multiple new (and rubbish) email addresses just for trial purpose.
why not use simple or node?
"Element Types" node now is renamed to "Categories" node "All Elements of Type" is renamed to "All Elements of Category"
No, it hasn't
@@TheBIMCoordinator yes it has. Just recreated this script with a new nodes.
MY PROBLEM [42000] [Microsoft][ODBC Microsoft Access Driver] Syntax error in field definition. (-3553)
-Integrating BIM into design teams is essential, considering its value for all team members. -Active engagement and open communication are pivotal for a smooth integration of BIM in design teams. -Effective communication, collaboration, and patience are universally recognized as key factors for successfully implementing BIM in design teams. -Many experts emphasize the importance of team structures and highlight the essential role of communication and collaboration. -The integration of BIM into design teams is widely acknowledged for promoting collaboration and streamlining team processes. -Constant and dynamic communication within the team is considered crucial for the successful integration of BIM into design processes. -Encouraging team members to share achievements and tools is recognized as a motivating factor that can lead to new advocates and collaborators.
thank you so much ❤❤
Amazing work 🙏
Thanks for the video, though I'm wondering is that something can be achieved through FME?
Not sure but you’d have to buy FME which is a slight limitation
Have you experimented with Autodesk APS Data Model API
What exactly does this work flow do/ can be used for?
In this case I am looking to audit a IFC. I'll explain more in the video I post tonight.
these added data are only in navisworks or it could be switched to revit ?
Finally been waiting for this video for a month. Thank you.
whatare you using for drawing?
The flow chart? Canva whiteboard. Many tools have whiteboards.
Thank you for the video. Please share the UpdateDynamoConfig.bat file
nice procedure but result didnt came as expect ...can u do briefly pls it is veryuseful
very seductive voice
Revit ASMR 😉
Great. Thanks
NICE