QSFPTEK is a high-tech company specializing in optical network solutions and services for all enterprises around the world. Our products including Optical Transceiver, Mux Demux, Media Converter and Patch Cable etc, will meet all your demands in telecom solutions. Factory-to-Customer is our new pattern to better serve customers, you’ll enjoy the lowest cost together with high-quality products in QSFPTEK.
website:www.qsfptek.com/
Пікірлер
Really nice. For me if there are rings I would not use velcro to for the cables. It just adds another operational hazard . If there are no rings I would use velcro before the cables turn inside each slot.
Nice video, but thus test was probably best done using, a more optimized pcie 2.5gb ethernet controller that would eliminate noise, not a USB 3.0 port. I never really trust USB 3 for anything other than maybe temporary lash drive file transfer and/or peripherals.
So cool and calm thank you..
Thumbnail says what is "OSFP"
Now that’s a good looking switch
Can you add a link to this switch I can not find it on your website
Hello, please indicate the distance in kilometers (km), or meters, if it is compatible for single-mode and multimode link. Greetings from Nicaragua. Company CLOUD NICARAGUA
Thank you for your video about Fiber Optic Cables Connectors types.
Connector is upside down. You dumb.
Thanks for your video. Do you have video for all types of Fiber optic cables, all models and different between them. Thank you
kzread.info/dash/bejne/aIZrlZiml8bLfs4.html This video may help you~
Thank you for your clearly video about DAC vs AOC Cables
good moive
Отвратительно. Жилы кривые, подрезка длинная. После укладывания жил по порядку, необходимо зажать их двумя пальцами и волнообразными движениями выровнять. Тогда при надевании коннектора они не будут топорщиться. Подрезать жилы нужно на 1,2-1, 5 сантиметра от изоляции, чтоб изоляция попала под зажим коннектора. Тогда при эксплуатации не вырешь жилы.
Nice tutorial ❤
Which switch support this transiver?
For example, CISCO and other brands of switches with 800G ports.😄
¿por que yt me recomendo este video?
I’m so confused
Where can i get them?
на что смотрим-то? на красоту васильковых патч-кордов?
#greytechlive comes to mind. Video replicated.
Oh yeah baby.
❤
Where's that in your front room 😂
❤Nice
only a geek like me can be turn on with this 😂
Are those TERA ports?
Looks like sfp28 on the right 25 gigabits each
They are QSFP28 100G ports. The new Terabit Ethernet telco units we're testing are QSFP-DD.
I wasn't referring to terabit speeds, I'm talking about the physical port named tera. It's used for cat7
WTF is this?
dislikes bugged.
Y'all couldn't get some ears for your own switches...?
check, clean and plug. Don't skip the most important thing
Why it is not aligned to the U??? Please align this patchpanel to correct to full U
Whats the full throughput of the device ?
This is our S7300-24X2C switch with 800Gbps throughput.
Nice
Beautiful
When I see a fiber patch cable, white-yellow, and on some ports it's yellow -white Please explain.
Because this is a duplex fiber optic cable, it follows the B polarity, with one end designated for transmitting (TX, Transmit) and the other for receiving (RX, Receive) optical signals. This involves cross transmission, hence the colors are reversed.
The sfp ports on the bottom are flipped so that you can reach the tab to remove the cable from the adapter. If they were oriented the same way, you wouldn't be able to unplug the bottom cables. Also, yes, the cables are TX/RX.
OMG! NO! DO NOT just gravity rack your equipment! What kind of psychopath are you!
My boy rawdoggin that fiber
"attenuation" isn't really the best word to use to describe why you have a slower bitrate at longer distance. Yes it is a factor but what affects the system more it "bit error rate" which ends up causing more transmit errors and retransmissions. This is why you see the longer the cable is, the more wave-like the transfer rate looks.
Ive been in IT for over 3 decades and have no idea what kind of sorcery this is. My guess, a GigaSwitch Centracon networking appliance 9000
This is for optical network termination basically a big aggregation switch for fiber
Use a 19 inch rack: OK Use rackmount switches: OK MOUNT THEM: Nah Just why?
Yeah, wird aplication. Probobly some marketing people make this clip 😂
1st
Pls tell me what is all this , I wanna understand btw I'm subscribing to ya 🎉
Thanks for subscribing, we are using our network switch.
@@QSFPTEK_officialyou mean, abusing your network switch lol😂
Hell yeah
Hell yeah
Curious on what this is??
This is our OTN device.
In short which one is suitable for switch to switch or OLT connections?
Whether to use DAC or AOC between switches mainly depends on whether the port is an electrical port or an optical port, and the transmission distance. OLT equipment is more suitable for using DAC.😀
Didnt see you clean or inspect those optics before mating them. Bad practice and poor form.
Our modules will be equipped with dust-proof plugs after use, so there won't be a lot of dust.😀
@@QSFPTEK_official ANY dust can be catastrophic. This is an uphill battle with IT Geeks. As a career layer one technician, "clean, inspect, connect" is best practice.
@@niniliumify Sure, I‘ll be open to accepting your suggestions.😀
Thought porn wasnt allowed on youtube....
What
For the prople who dont understand. This is a server rack. He is installing network switches. Those strange 2 wire cables are optic fiber cables, they use light to send data. It splits the network into many ethernet ports to connect other servers too. Very expensive.
Hey buddy I have fiber connnection if I connect my roter to a switch by ethernet and add one more router to switch will both router give me internet connection
@@iconiccaptainben8974 You don't connect your router to a switch, you connect it to your modem
@@mazarinee Uh, no.
@@iconiccaptainben8974 Weird place to ask for advice. You need a router that can connect to 2 internet providers and do load balancing or failover. Replace your 2 old routers with this new router and configure it correctly.
@@JayCGypsy yes...? In all home networks, it goes: coax -> modem -> router
What is this?
Networking
DO NOT BUY THIS PRODUCT!!! It is 100% fraud! There is no way to get the control software shown here.