Пікірлер

• 
  @alexiejulius492727 күн бұрын

  How long you cured the gasket maker? I changed mine and cured it 24 hours and still leaks

• 
  @big74blazer27 күн бұрын

  I let it sit for 5 minutes before reassembling then I started it probably 3 hours later. Never leaked. Did you clean both surfaces really good?

• 
  @alexiejulius492727 күн бұрын

  Yeah I cleaned the surface cover sealant was new and the balancer. Don’t know why mine is leaking.

• 
  @big74blazer27 күн бұрын

  @@alexiejulius4927 what sealant did you use

• 
  @alexiejulius492724 күн бұрын

  @@big74blazer Loctite 518

• 
  @rogerreed97682 ай бұрын

  Good job on the change out. Straight forward without all the stupid talk you'll find on other videos. What was the total time you had prior to having to change out? Just wondering

• 
  @big74blazer2 ай бұрын

  Under 400 hours

• 
  @christiancrow2 ай бұрын

  Doesn't that need air to move that sound underneath, my sub always moves air , it be hard to drill in that bucket all I am saying

• 
  @gavincornell2612 ай бұрын

  I’m pretty sure a Nissan versa can beat this thing!

• 
  @user-tireauction3 ай бұрын

  Great video

• 
  @big74blazer3 ай бұрын

  Thanks!

• 
  @michaelscorzelli88303 ай бұрын

  Thanks for the video! Is that regular motor oil you're putt on the bolt threads? Also, how long did you wait for the sealant to cure before running the motor?

• 
  @matttexas21055 ай бұрын

  I have a mosin with a PU Scope and mount and I want to convert it to a PEM Scope and mount, are the drill holes on the side the same length apart on the PU rifles as the PEM ones? Would I be able to just remove the PU Scope and Mount and replace with the PEM Scope and Mount without any additional gunsmithing?

• 
  @big74blazer5 ай бұрын

  No the spacing is totally different

• 
  @bruceintas5 ай бұрын

  Non stop thunder

• 
  @mitch95215 ай бұрын

  These are such garbage cars.

• 
  @Video-co1eu6 ай бұрын

  My Innova 2.4 is still faster

• 
  @TheEuroGarage6 ай бұрын

  Holy cow that was a 13 sec 0-60!

• 
  @toedtick61789 ай бұрын

  Since when Jhon Marston start whacking this mfs?

• 
  @spiffiK9 ай бұрын

  Luxurious, comfortable, quiet, stock 0 to 60 around 7 seconds, notoriously reliable, and the beautiful sound of that 2jz at high rpms. What's not to love?

• 
  @markdoherty14417 ай бұрын

  It looks as boring as your mother with her clothes off

• 
  @ThaGVPSon6 ай бұрын

  I'm buying one. Affordable too!

• 
  @000Sunshine8210 ай бұрын

  That is scary just seeing how dark it gets in the sky, knowing a storm is coming..😮

• 
  @jaredzeno10 ай бұрын

  I had both mine done. 2006 twin 150's. Sometimes when I put the boat into gear both motors cut off like a light switch. They start right back up and run great. I had the balancers done as soon as I bought the boat so im not sure if it did this before. Any insight on why they may do that? thanks -Jared

• 
  @jaredzeno6 ай бұрын

  realized I was just to sofft when shifting into gear. Gotta put it in like you want it to go in gear havent had a stall since.

• 
  @odtampa870811 ай бұрын

  Do you know if the “new and improved “ Part number ending in 04 will work for my 06/07 which calls for part number 02

• 
  @big74blazer11 ай бұрын

  Yes it will that's what I used and mine are 2006/07

• 
  @FishHuntDive11 ай бұрын

  Thank you for doing this!

• 
  @stevemuskett9553 Жыл бұрын

  Thanks great info!! I’ve got an 05 F-150 and trying to figure out if I should replace it or delete it?

• 
  @big74blazer Жыл бұрын

  I heavily considered it, but I decided I wanted them.

• 
  @jayblackwell8484 Жыл бұрын

  Where did you get the service instructions?

• 
  @big74blazer Жыл бұрын

  f01.justanswer.com/oldnewenglandmarine/024d8917-0024-482c-8d19-805bd5718401_F150_Balancer.pdf That is a download able PDF of the procedure. If you don't trust links on KZread you can Google "Yamaha F150 balancer replacement" and find the JustAnswer link I posted above. Good luck!

• 
  @jayblackwell8484 Жыл бұрын

  @@big74blazer thank you sir. Very helpful

• 
  @waynesimmons7052 Жыл бұрын

  What’s the red stuff on the balancer? Does it come with new balancer?

• 
  @big74blazer Жыл бұрын

  Locktite 518 and it does not come with the balancer

• 
  @waynesimmons7052 Жыл бұрын

  @@big74blazer ty

• 
  @robbiefetterman7723 Жыл бұрын

  Noon to midnight in seconds

• 
  @user-zw5ci6kw9f Жыл бұрын

  Thanks for the video. Did mine yesterday. Took about 2 hours. Nice and quiet now. The original was really tight, the replacement had some slop like you showed. 2009 Yamaha F150, low hours.

• 
  @big74blazer Жыл бұрын

  Good to hear!

• 
  @dougplommer9961 Жыл бұрын

  We will see

• 
  @dougplommer9961 Жыл бұрын

  My 04 Yamaha's 150s have 1100 hours on them. Is it possible i will never have this problem?

• 
  @big74blazer Жыл бұрын

  Yes its possible. It seems like, and this is totally anecdotal, it's the older F150s with low hours that have problems

• 
  @CaptainSloose Жыл бұрын

  i have twin F150s m/y 04/05 on my grady with similar hours now- when i bought the boat the motors at 860 hours, the balancers were replaced once under the TSB, and they were so badly worn and out of time that the yamaha mechanic was concerned abotu premature main bearing failure. The motors had a slight but pronounced shake at idle and the balancers squeaked. If you havent replaced your balancers since new, you might wanna get them checked. They are considered a wear item now, some people say to replace them every 500 hours. I'm going to keep an eye on mine once i get to 500 since replacement and listen for squeaks...which will be ~1360 hours. Good luck.

• 
  @donschrank Жыл бұрын

  This was a really helpful video. Thank you! I replaced my balancer yesterday so I'm going to fire up the engine today.

• 
  @big74blazer Жыл бұрын

  Hope start up went great!

• 
  @apsamansky Жыл бұрын

  Great video. Thank you! Do you have to drain all the engine oil before removing the old balancer, or is the static oil level below when it comes off? Hoping to do mine tomorrow…

• 
  @big74blazer Жыл бұрын

  No need to drain oil

• 
  @rysterstech Жыл бұрын

  Could use a tune

• 
  @bestofmma7043 Жыл бұрын

  Thankyou for the tutorial!

• 
  @midgetmayo Жыл бұрын

  I don't care what the haters say , this is arguably one of the best sounding cars ever made.

• 
  @itsallalie3769 Жыл бұрын

  Changed mine today. I have the 2008 tech manual but your video helped. Thanks brother.

• 
  @bestofmma7043 Жыл бұрын

  Hey man I have 2008 too but it’s not making the noise yet! I’m not the first owner so I don’t know if they replaced it. How many hours did you have when you have to replace yours? Mine got 640 hrs

• 
  @itsallalie3769 Жыл бұрын

  @@bestofmma7043 My engine is a 2006. The instructions for the change out are in the 2008 tech manual. Same procedure for all F150s. Mine wasn't as loud as the one in the vid but I changed it because I ran up on a bar hard. That has the potential to damage the balancer as it spins twice, or there about, the engine RPMs. The engine has 1000 hrs.

• 
  @big74blazer Жыл бұрын

  ​@@bestofmma7043 these motors have under 400 hours

• 
  @britboard Жыл бұрын

  @@bestofmma7043 if you look at about 3:42 you can see the balancer pack, there is a small round piece in the casting with some numbers in it. Just above that you can see a stamped in number which states the generation of the balancer pack anything stamped 4 and above is good and has the oiler built in anything below 4 is the problem packs

• 
  @alexiejulius492728 күн бұрын

  What kind of gasket maker you have?

• 
  @itsallalie3769 Жыл бұрын

  What sealant did you use and did you end up with any leaks?

• 
  @big74blazer Жыл бұрын

  This is the stuff Yamaha recommends and it had no leaks. Loctite 518 is the stuff a.co/d/1cGRYOQ

• 
  @brittoncorbin7144 Жыл бұрын

  Indian Head gasket works great

• 
  @KingDuukey Жыл бұрын

  If all the serial numbers match and the bolt's lever is not bent, does that indicate that the bolt has never been used in a sniper rifle? And if that is the case, can we conclude that the rifle in question is not a sniper rifle?

• 
  @big74blazer Жыл бұрын

  No that is not an indication. They force matched bolts as well

• 
  @Crosbie85 Жыл бұрын

  That ending wo

• 
  @Crosbie85 Жыл бұрын

  Ahh yes I remember this storm anybody In 317 remembers this day because it was crazy

• 
  @samwh4775 Жыл бұрын

  It’s clear that the gearing of the 7 speed in this is not the same as the 7 speed in the G37/Q50, they probably did it because it’s a truck I guess

• 
  @mrtuvok557811 ай бұрын

  Yeah gearing is longer

• 
  @mrsim1976 Жыл бұрын

  The sky turning dark seems apocalyptic ! 😮🌩

• 
  @samfranklin248 Жыл бұрын

  Put your car in the garage!

• 
  @marvinhanson6942 Жыл бұрын

  You want the v on the top on the intake as well, the v is there to deflect the oil on to the valves

• 
  @kristenfuller91682 жыл бұрын

  Wow love this video. What kind of storm was this this wasn't a normal thunderstorm thunderstorms don't normally get pitch black like that. I just had a nasty loud thunderstorm right over top of my house last night. My mom said she was watching that black cloud and It stopped and It started pouring down.

• 
  @scholastica16582 жыл бұрын

  the clouds turned the atmosphere very dark and terrifying. . wow. beautiful video thanks

• 
  @markcopeland44482 жыл бұрын

  Here we are almost exactly 9 years later........Do you still live there, because as of 7:30pm you are in the crosshairs. If you are still there, you should record it. I know the town you lived in and it will hit you around 7:50 - 7:55.

• 
  @kylegillespie75482 жыл бұрын

  I remember this... were you in same house when 120mph hit in 06

• 
  @joeschneider672 жыл бұрын

  Is that titan stock?

• 
  @big74blazer2 жыл бұрын

  Yes

• 
  @Schrodingers_kid2 жыл бұрын

  You are very damn lucky with that rifle Not many of them are accurate(war time mosins)

• 
  @chrisholland20162 жыл бұрын

  Yeah just got mine not too long ago and it accelerates just fine. Never had any major issues with it. Now I have something to haul my horse with. Love my Texas Edition Titan it's alot better than my tundra that's for damn sure.

• 
  @dangerousfreedom49652 жыл бұрын

  Where can I buy the PEM mount?

• 
  @onlyeightpsi2 жыл бұрын

  Best car ever made!!!

• 
  @stevendaniel81262 жыл бұрын

  Terrifying......

• 
  @stevendaniel81262 жыл бұрын

  Terrifying........

• 
  @bubayaga72072 жыл бұрын

  Big guns aren’t made for little boys!