Was this recent? Trail looks pretty clear. We went last year in August total of 5 sprinter vans and the step up was crazy.
@RoamWithJon3 күн бұрын
Mmm I shot this a week before I posted it. Very recent. Yeah if you’re coming up in a sprinter van I wouldn’t suggest coming in through the normal entrance lol. There’s other ways to get to bowman lake.
@krissryanmndz5063 күн бұрын
Nice video! How long is the trail like miles?
@RoamWithJon3 күн бұрын
Thank you! Very very short, if I had to guess probably about 3 miles.
@krissryanmndz5062 күн бұрын
@@RoamWithJon 3 miles and u see the lake? Yeah we planning to go there with couple of friends . This will be our firs time
@krissryanmndz5062 күн бұрын
We are kindna rookie about trails it it going down hill? Thanks for sharing the info!
@RoamWithJon2 күн бұрын
@@krissryanmndz506 should be just about. It’s actually fairly short. Only took us about 20-30 minutes if I remember correctly.
@RoamWithJon2 күн бұрын
@@krissryanmndz506 it’s actually pretty steep uphill in some portions. One really off camber section, a coupe water crossings, but aside from that the trail was pretty easy
@stevenhyles64164 күн бұрын
Your Tacoma looks great, what brand of awnings did you go with
@RoamWithJon4 күн бұрын
Thank you, I was using a roam adventure co awning for a while but moved to an ovs 180 degree awning 🤙🏽
@sib30four5 күн бұрын
Ya'll seems like a fun crew! I was at Saw Mill from the 17th -23rd.
@RoamWithJon5 күн бұрын
Aha thanks! Love the area, sawmill was going to be a backup if there was no room at bowman.
@theanimalspike15 күн бұрын
I just installed mine and once full, it doesn't feel like it supports it well enough. I would like to ask how does it hold up to some rough roads and or bumps?
@RoamWithJon5 күн бұрын
It’s a little wobbly with the stock set up. I eventually ended up making my own mounts. You can use a couple 100lb zip ties to keep it from rocking but then you’d lose the ability to take it off. No issues though off-road it just rocked back and fourth lol
@Essera265 күн бұрын
"This is where we switch" 😂. I bet you switched at that hair pin turn eh? I was just there today. Just got home. Great place. My wife wanted nothing to do with the driving lol. I'm definitely going back. Dope spot for sure! Take care! 👊🏽
@RoamWithJon5 күн бұрын
Yeah it was the sharp turn with the step up lol I think she would’ve been fine if the jeep guy would’ve give us way. Usually the people going up have the right away but the guy kept going 🤦🏻♂️ Love bowman, we try to go up twice a year if we have time. Cheers 🍻
@CheeseLayong5 күн бұрын
Dope
@RoamWithJon5 күн бұрын
🙌🏽🙌🏽
@footnassfishermen88176 күн бұрын
Sucks how busy and blown up it is now ,Facebook and KZread ruined it,but I'm glad to see your family enjoying it! It's definitely a sacred place, and we need to try to keep it that way.
@loslakers5306 күн бұрын
Love the vids and rig brotha! I was here last week during Fathers Day!
@RoamWithJon6 күн бұрын
Thank you! That sounds like a good Father’s Day aha
@pete76747 күн бұрын
Nice install, thanks.
@RoamWithJon7 күн бұрын
No worries 🤙🏽
@dk47907 күн бұрын
a little late to this video, i just picked up a 24 tacoma OR, you think stock suspension should be enough for this trail?
@RoamWithJon7 күн бұрын
With some carefully driving you could. I honestly wouldn’t if you didn’t at least have some good tires and sliders
@nickorozco59337 күн бұрын
That’s so sick. The only con is how much money I will spend for this set up 😂
@RoamWithJon7 күн бұрын
That is true LOL not gonna lie but it’s nice having everything premade and fitted
@nickorozco59337 күн бұрын
Do you know if this rack would be compatible if I have a sunroof? Do you think it would interfere with it?
@RoamWithJon7 күн бұрын
@@nickorozco5933 it shouldn’t, it’s just like any other rack in the market and mounts the same Way.
@dgarcia7358 күн бұрын
The skids have to come off when you do a fluid change to the transfer case and transmission?
@RoamWithJon8 күн бұрын
There’s a little door you can take off. You can then use something like a box or half of a cup to block the initial flow of oil so it doesn’t go everywhere. Then replace it with a fumoto valve if you’d like
@NVLunarTaco10 күн бұрын
Nice, bro. I’ll be heading up there in a month with some family. Great place to chill for sure.
@RoamWithJon10 күн бұрын
Ahh man it’s gonna be super nice, we might go back up this weekend haha.
@JP-ul8di10 күн бұрын
Let's do it again pare
@RoamWithJon10 күн бұрын
Ya next time I stay the whole weekend lol
@laceface413015 күн бұрын
This video is how I found out they only sent me two relocation brackets, so now my front end is torn apart and I can’t finish until I get the other bracket. Do you have to have the part by the passenger side bolted down?
@RoamWithJon15 күн бұрын
Tbh I’m not 100% sure, I’d ask the cali raised guys to see if they would be an issue in the mean time, I would think structurally the front ones are the most important.
@laceface413015 күн бұрын
Ok thanks for the reply. Now for some reason my bolts don’t line up exactly with the holes so I gotta figure that out. Did you have any issues getting on the 6 bolts? Me and my neighbor just wrestled with it for 30 minutes before calling it a night
@RoamWithJon15 күн бұрын
@@laceface4130 negative had zero issues it was a basic bolt on process for me
@krishayward525917 күн бұрын
My buddy put on his f150, he said he almost lost his shit putting it on. They look great though.
@RoamWithJon17 күн бұрын
Lmao when theyre new it’s kinda rough but they break in and become easier to take down and put up
@tambosnipes165221 күн бұрын
Would this be good hybrid xamper for work and camping
@RoamWithJon20 күн бұрын
Oh 100% gear is easily accessible through the side doors and it’s very sturdy. I also sleep in the bed when I go camping.
@phungelium21 күн бұрын
I’ve had the same one for years & it works great. Only issue is the air gauge broke very early on which is a bummer. Don’t rely on it to be accurate, always have a traditional gauge in your rig.
@RoamWithJon20 күн бұрын
Mines still going strong, I use it as a secondary compressor now mostly to air up my water tank or what ever needs to be air’d up lol
@RoamWithJon21 күн бұрын
It’s a lot more like cushiony, it’s not just a straight dive it’s hard to tell in the video.
@kazarjar632921 күн бұрын
So, pretry much the same
@RoamWithJon7 күн бұрын
This video probably wasn’t a good representation lol, it’s honestly more felt in the driver seat.
@redneck_buddha23 күн бұрын
Great shots! Looks like a blast! Been meaning to get up to Medocino but a haul from Santa Cruz.
@RoamWithJon23 күн бұрын
Oh that would be a drive and a half haha well worth the drive though!
@busdriv3r23 күн бұрын
how dare you blur out the best parts of this video!
@RoamWithJon23 күн бұрын
LOL can’t be caught slippin!
@DGILtv19 күн бұрын
😂
@ORG4Runna23 күн бұрын
🔥
@RoamWithJon23 күн бұрын
🤪🤙🏽
@slowblueoval199725 күн бұрын
Glad I found this solution I installed an S&B intake today but my Redline tuning strut doesn't fit on the passenger side. Thanks for the install video. Just ordered my single strut kit.
@RoamWithJon25 күн бұрын
Nice 👍🏽 it’s still going strong for me
@luissantiago14727 күн бұрын
Great video! I have a question…does this kit come with torque values? I don’t see where you mention any.
@RoamWithJon27 күн бұрын
You can contact cali raised for that info, but I believe I used the same torque spec as the similar SSO bumper
@aghamatic28 күн бұрын
Got the Ai13 cause of this video. Thanks brother.
@RoamWithJon28 күн бұрын
🤙🏽🤙🏽
@bmwfnboy29 күн бұрын
Lol just incase you run out you have one extra pray it dont rain 🤣🤣
@RoamWithJon29 күн бұрын
Lmao I bring extra extra just in case
@bmwfnboy29 күн бұрын
Lol fr
@bmwfnboyАй бұрын
Thats cool
@RoamWithJonАй бұрын
thank you
@bmwfnboy29 күн бұрын
Yw man hope to see more in the future
@RoamWithJon29 күн бұрын
@@bmwfnboy yeee already got the next one qued up
@bmwfnboy29 күн бұрын
Def gonna watch it lemme know when its out
@1rkmagee1Ай бұрын
Are you in the Bay Area? I live in Newark. I just bought the 0082 for when I go to Pismo.
@RoamWithJonАй бұрын
Yessir.
@1rkmagee1Ай бұрын
@@RoamWithJon Hit me up next time you go out. I went Frank Raines a couple weeks ago. Got my first scratches. I plan on going through SWAT Customs in Fremont for my Bilstein lift, steel grill and winch.
@KirbyLouisАй бұрын
aux lights on in broad day light: broverlander things
@RoamWithJonАй бұрын
Which lights? Usually we run chase lights to let the person behind know how much space they have, and ditch lights or light bars to let the person in from know if they lost someone in the dust. The front lights also let people coming from the opposite direction know we’re coming up.
@mikelabreeАй бұрын
Do the buckles on the bottom of the tailgate scratch it? I’m in the fence about buying one. I don’t like sleeping diagonally anymore.
@RoamWithJonАй бұрын
I haven’t any issues with scratching. If you want to I suppose you could lay a microfiber across where the straps would make contact and where the buckles are. I hated sleeping diagonally or curled up in a ball lmao. My only downside is it does kinda get floppy when it’s windy. But I figured out if I push a backpack up against it, it got rid of that issue.
@mnmz6934Ай бұрын
Yoo is this plaskett ridge? Sucks they are closed indefinitely
@RoamWithJonАй бұрын
Prolly 😉 yeah sucks they closed down basically that whole area for camping.
@CommonUnityProductionsАй бұрын
Did you end up putting that tent sealant on? If not, did it leak?
@RoamWithJonАй бұрын
I didn’t, never had any leaking issues during the time I had the soft topper
@reynantesarmiento7597Ай бұрын
Where to buy that trd pro grill?
@RoamWithJonАй бұрын
Bullet proof fabricating
@reynantesarmiento7597Ай бұрын
@@RoamWithJon is this grill with front censor fitment?
@RoamWithJonАй бұрын
@@reynantesarmiento7597 I had no issues with my front sensor
@reynantesarmiento7597Ай бұрын
@@RoamWithJon it's sold out 2018+
@MrWortWort1Ай бұрын
Nice How's the pole holding? Did you need to replace it?
@RoamWithJonАй бұрын
It’s been good, been using the same pole since this video lol
@peterfernandez3135Ай бұрын
Good to hear. Do you notice any wind noise or decrease in mileage by running the topper
@RoamWithJonАй бұрын
Nah no extra noise, my mpg has always been bad since there’s so much gear on my truck.
@peterfernandez3135Ай бұрын
@@RoamWithJon thanks for the feedback…I’ll probably order one this week and set up install in NorCal
@RoamWithJonАй бұрын
@@peterfernandez3135 no worries
@peterfernandez3135Ай бұрын
How are you liking the topper. Im very interested getting one
@RoamWithJonАй бұрын
I like it a lot, zero complaints. I kinda wish I got the full camper with rtt lol.
@contentlessincali602Ай бұрын
How long did it take to receive your order, I hear it takes forever and a day until they’re delivered? Any rattling or vibration noises? Thx for the vid, im definitely considering this product 👍
@RoamWithJonАй бұрын
I personally don’t have any rattles or noises coming from mine. Also not sure how long they take to ship would think it’s dependent on stock
@mergenocide26 күн бұрын
Mines took several months
@RoamWithJon26 күн бұрын
@@mergenocide sheeesh I was under the impression they were ready to ship
@contentlessincali60225 күн бұрын
@@mergenocideDo your cat covers rattle as you drive off road or the highway, I was about to order a pair until heard about the annoying rattling issue.
@RoamWithJon25 күн бұрын
@contentlessincali602 I have no rattles. I’m pretty sure the people who have rattled either messed up the install or have a defective unit.
@forgottenknowledge8917Ай бұрын
Use jam nuts on carriage bolts. That'll keep em tight
@RoamWithJonАй бұрын
That’s a good idea. I think I ended up using some locking washers.
@jehadgharibАй бұрын
nice setup kuya ! subscribed
@RoamWithJonАй бұрын
Tyty 🙏🏽
@shiggyTacomaАй бұрын
do you have a video of how "YOU" wired your lights to the power switch, coz IDK what to do with the on/off Switch that comes with the wiring kit.
@RoamWithJonАй бұрын
For the light bar or the pod lights? I might drop a video soon on lighting and lighting since it’s probably the most often question I’ve been asked
@shiggyTacomaАй бұрын
Do you need a relay when you are connecting your light bar to the power switch? Does the garmin power switch replaces the relay? That is the missing information I’m looking for.
@RoamWithJonАй бұрын
@@shiggyTacoma if the light bar exceeds 30w the power switch turns off
@jsn1300Ай бұрын
@@shiggyTacoma yes it replaces the relay. each contact on the garmin powerswitch is rated at 30 amps, so as long as your draw in under 30 amps then you don't need the relay. The whole point of switch controllers is to remove the need for having relays for most of your devices. Adding a relay would be redundant in this application. In your case, you would cut off the on/off switch if wiring to a switch panel like a power switch. you would only need the two wires that go directly to the light bar. The positive wire would connect to your switch panel output terminal, and the negative wire would land on a ground terminal. That's all that is needed for a light.
@cartymediaАй бұрын
This looks like a lot of work for when it snaps. Why not use a Wash 15 mount?
@RoamWithJonАй бұрын
Dunno I think at the time this was the solution that was fastest and easiest. Haven’t had any issues with it so far
@nashgamalinda5383Ай бұрын
What does LTE means in awning?
@RoamWithJonАй бұрын
Not sure I’d assume it’s just a light version, smaller and compact
@robertmuth8566Ай бұрын
It’s didn’t leak lol it looks like you unlocked it first before putting it in the hole. First align the hook towards the gas hole edges then you unlock it and push it down so it can pour easier I have one and it works fine
@RoamWithJon7 күн бұрын
Sorry for the late reply I might have unlocked it before I picked it up and didn’t relock it all the way lol. But either way it mostly to show how cumbersome and clunky it was to use and that the fill time was extra long with the oem nozzle. With the free flow nozzle I found it’s less cumbersome, clunky, and overall emptied the roto pack much faster. Overall less work and headache.
@mattfelix-smith4257Ай бұрын
Thank you for the video. I got my skids second hand off a totaled truck. A few parts were missing with this video I was able to figure it all out
Пікірлер
🔥🔥🔥 amazing vid as always brotha! 🤙🏼
Thanks Braddah when are you coming out lol
❤️
Was this recent? Trail looks pretty clear. We went last year in August total of 5 sprinter vans and the step up was crazy.
Mmm I shot this a week before I posted it. Very recent. Yeah if you’re coming up in a sprinter van I wouldn’t suggest coming in through the normal entrance lol. There’s other ways to get to bowman lake.
Nice video! How long is the trail like miles?
Thank you! Very very short, if I had to guess probably about 3 miles.
@@RoamWithJon 3 miles and u see the lake? Yeah we planning to go there with couple of friends . This will be our firs time
We are kindna rookie about trails it it going down hill? Thanks for sharing the info!
@@krissryanmndz506 should be just about. It’s actually fairly short. Only took us about 20-30 minutes if I remember correctly.
@@krissryanmndz506 it’s actually pretty steep uphill in some portions. One really off camber section, a coupe water crossings, but aside from that the trail was pretty easy
Your Tacoma looks great, what brand of awnings did you go with
Thank you, I was using a roam adventure co awning for a while but moved to an ovs 180 degree awning 🤙🏽
Ya'll seems like a fun crew! I was at Saw Mill from the 17th -23rd.
Aha thanks! Love the area, sawmill was going to be a backup if there was no room at bowman.
I just installed mine and once full, it doesn't feel like it supports it well enough. I would like to ask how does it hold up to some rough roads and or bumps?
It’s a little wobbly with the stock set up. I eventually ended up making my own mounts. You can use a couple 100lb zip ties to keep it from rocking but then you’d lose the ability to take it off. No issues though off-road it just rocked back and fourth lol
"This is where we switch" 😂. I bet you switched at that hair pin turn eh? I was just there today. Just got home. Great place. My wife wanted nothing to do with the driving lol. I'm definitely going back. Dope spot for sure! Take care! 👊🏽
Yeah it was the sharp turn with the step up lol I think she would’ve been fine if the jeep guy would’ve give us way. Usually the people going up have the right away but the guy kept going 🤦🏻♂️ Love bowman, we try to go up twice a year if we have time. Cheers 🍻
Dope
🙌🏽🙌🏽
Sucks how busy and blown up it is now ,Facebook and KZread ruined it,but I'm glad to see your family enjoying it! It's definitely a sacred place, and we need to try to keep it that way.
Love the vids and rig brotha! I was here last week during Fathers Day!
Thank you! That sounds like a good Father’s Day aha
Nice install, thanks.
No worries 🤙🏽
a little late to this video, i just picked up a 24 tacoma OR, you think stock suspension should be enough for this trail?
With some carefully driving you could. I honestly wouldn’t if you didn’t at least have some good tires and sliders
That’s so sick. The only con is how much money I will spend for this set up 😂
That is true LOL not gonna lie but it’s nice having everything premade and fitted
Do you know if this rack would be compatible if I have a sunroof? Do you think it would interfere with it?
@@nickorozco5933 it shouldn’t, it’s just like any other rack in the market and mounts the same Way.
The skids have to come off when you do a fluid change to the transfer case and transmission?
There’s a little door you can take off. You can then use something like a box or half of a cup to block the initial flow of oil so it doesn’t go everywhere. Then replace it with a fumoto valve if you’d like
Nice, bro. I’ll be heading up there in a month with some family. Great place to chill for sure.
Ahh man it’s gonna be super nice, we might go back up this weekend haha.
Let's do it again pare
Ya next time I stay the whole weekend lol
This video is how I found out they only sent me two relocation brackets, so now my front end is torn apart and I can’t finish until I get the other bracket. Do you have to have the part by the passenger side bolted down?
Tbh I’m not 100% sure, I’d ask the cali raised guys to see if they would be an issue in the mean time, I would think structurally the front ones are the most important.
Ok thanks for the reply. Now for some reason my bolts don’t line up exactly with the holes so I gotta figure that out. Did you have any issues getting on the 6 bolts? Me and my neighbor just wrestled with it for 30 minutes before calling it a night
@@laceface4130 negative had zero issues it was a basic bolt on process for me
My buddy put on his f150, he said he almost lost his shit putting it on. They look great though.
Lmao when theyre new it’s kinda rough but they break in and become easier to take down and put up
Would this be good hybrid xamper for work and camping
Oh 100% gear is easily accessible through the side doors and it’s very sturdy. I also sleep in the bed when I go camping.
I’ve had the same one for years & it works great. Only issue is the air gauge broke very early on which is a bummer. Don’t rely on it to be accurate, always have a traditional gauge in your rig.
Mines still going strong, I use it as a secondary compressor now mostly to air up my water tank or what ever needs to be air’d up lol
It’s a lot more like cushiony, it’s not just a straight dive it’s hard to tell in the video.
So, pretry much the same
This video probably wasn’t a good representation lol, it’s honestly more felt in the driver seat.
Great shots! Looks like a blast! Been meaning to get up to Medocino but a haul from Santa Cruz.
Oh that would be a drive and a half haha well worth the drive though!
how dare you blur out the best parts of this video!
LOL can’t be caught slippin!
😂
🔥
🤪🤙🏽
Glad I found this solution I installed an S&B intake today but my Redline tuning strut doesn't fit on the passenger side. Thanks for the install video. Just ordered my single strut kit.
Nice 👍🏽 it’s still going strong for me
Great video! I have a question…does this kit come with torque values? I don’t see where you mention any.
You can contact cali raised for that info, but I believe I used the same torque spec as the similar SSO bumper
Got the Ai13 cause of this video. Thanks brother.
🤙🏽🤙🏽
Lol just incase you run out you have one extra pray it dont rain 🤣🤣
Lmao I bring extra extra just in case
Lol fr
Thats cool
thank you
Yw man hope to see more in the future
@@bmwfnboy yeee already got the next one qued up
Def gonna watch it lemme know when its out
Are you in the Bay Area? I live in Newark. I just bought the 0082 for when I go to Pismo.
Yessir.
@@RoamWithJon Hit me up next time you go out. I went Frank Raines a couple weeks ago. Got my first scratches. I plan on going through SWAT Customs in Fremont for my Bilstein lift, steel grill and winch.
aux lights on in broad day light: broverlander things
Which lights? Usually we run chase lights to let the person behind know how much space they have, and ditch lights or light bars to let the person in from know if they lost someone in the dust. The front lights also let people coming from the opposite direction know we’re coming up.
Do the buckles on the bottom of the tailgate scratch it? I’m in the fence about buying one. I don’t like sleeping diagonally anymore.
I haven’t any issues with scratching. If you want to I suppose you could lay a microfiber across where the straps would make contact and where the buckles are. I hated sleeping diagonally or curled up in a ball lmao. My only downside is it does kinda get floppy when it’s windy. But I figured out if I push a backpack up against it, it got rid of that issue.
Yoo is this plaskett ridge? Sucks they are closed indefinitely
Prolly 😉 yeah sucks they closed down basically that whole area for camping.
Did you end up putting that tent sealant on? If not, did it leak?
I didn’t, never had any leaking issues during the time I had the soft topper
Where to buy that trd pro grill?
Bullet proof fabricating
@@RoamWithJon is this grill with front censor fitment?
@@reynantesarmiento7597 I had no issues with my front sensor
@@RoamWithJon it's sold out 2018+
Nice How's the pole holding? Did you need to replace it?
It’s been good, been using the same pole since this video lol
Good to hear. Do you notice any wind noise or decrease in mileage by running the topper
Nah no extra noise, my mpg has always been bad since there’s so much gear on my truck.
@@RoamWithJon thanks for the feedback…I’ll probably order one this week and set up install in NorCal
@@peterfernandez3135 no worries
How are you liking the topper. Im very interested getting one
I like it a lot, zero complaints. I kinda wish I got the full camper with rtt lol.
How long did it take to receive your order, I hear it takes forever and a day until they’re delivered? Any rattling or vibration noises? Thx for the vid, im definitely considering this product 👍
I personally don’t have any rattles or noises coming from mine. Also not sure how long they take to ship would think it’s dependent on stock
Mines took several months
@@mergenocide sheeesh I was under the impression they were ready to ship
@@mergenocideDo your cat covers rattle as you drive off road or the highway, I was about to order a pair until heard about the annoying rattling issue.
@contentlessincali602 I have no rattles. I’m pretty sure the people who have rattled either messed up the install or have a defective unit.
Use jam nuts on carriage bolts. That'll keep em tight
That’s a good idea. I think I ended up using some locking washers.
nice setup kuya ! subscribed
Tyty 🙏🏽
do you have a video of how "YOU" wired your lights to the power switch, coz IDK what to do with the on/off Switch that comes with the wiring kit.
For the light bar or the pod lights? I might drop a video soon on lighting and lighting since it’s probably the most often question I’ve been asked
Do you need a relay when you are connecting your light bar to the power switch? Does the garmin power switch replaces the relay? That is the missing information I’m looking for.
@@shiggyTacoma if the light bar exceeds 30w the power switch turns off
@@shiggyTacoma yes it replaces the relay. each contact on the garmin powerswitch is rated at 30 amps, so as long as your draw in under 30 amps then you don't need the relay. The whole point of switch controllers is to remove the need for having relays for most of your devices. Adding a relay would be redundant in this application. In your case, you would cut off the on/off switch if wiring to a switch panel like a power switch. you would only need the two wires that go directly to the light bar. The positive wire would connect to your switch panel output terminal, and the negative wire would land on a ground terminal. That's all that is needed for a light.
This looks like a lot of work for when it snaps. Why not use a Wash 15 mount?
Dunno I think at the time this was the solution that was fastest and easiest. Haven’t had any issues with it so far
What does LTE means in awning?
Not sure I’d assume it’s just a light version, smaller and compact
It’s didn’t leak lol it looks like you unlocked it first before putting it in the hole. First align the hook towards the gas hole edges then you unlock it and push it down so it can pour easier I have one and it works fine
Sorry for the late reply I might have unlocked it before I picked it up and didn’t relock it all the way lol. But either way it mostly to show how cumbersome and clunky it was to use and that the fill time was extra long with the oem nozzle. With the free flow nozzle I found it’s less cumbersome, clunky, and overall emptied the roto pack much faster. Overall less work and headache.
Thank you for the video. I got my skids second hand off a totaled truck. A few parts were missing with this video I was able to figure it all out
Nice glad I could help