That is one solid bench! When you cut the braces, if you just cut one angle then alternate the brace orientation you cut less & don’t lose the length of the triangle off cut🤓
@ValioMadre77 ай бұрын
I love my mute button.
@WildBoreWoodWind7 ай бұрын
That's poorly executed, obviously someone who is not a cabinetmaker - This is an example of what not to do.
@caseyf82298 ай бұрын
😳 Promo*SM
@paulmonk78209 ай бұрын
Why is the winch so high? Put a pulley on top and lower the winch.
@ez797710 ай бұрын
Great use! But you should not join/glue different species together. They will hold different moisture levels and expand/contract at different rates and separate.
@woodlandtreeworks34209 ай бұрын
That's true. I'm intrigued to see how this table lasts.
@mainey9711 ай бұрын
Good job 🎉
@aaronwatkins897311 ай бұрын
That doesn't seem like nearly enough glue.
@mainey9711 ай бұрын
No problem
@mainey9711 ай бұрын
Good job fam
@woodlandtreeworks342011 ай бұрын
Thank you!
@mainey9711 ай бұрын
Great job
@threestarfancywoodworks1902 Жыл бұрын
youtube.com/@threestarfancywoodworks1902
@dougb100 Жыл бұрын
Just came across your video, I recently turned a pen from a piece similar to your scraps & made a pen with the top half a semi live edge. One of my favourite pieces now!
@mena46pr Жыл бұрын
Love it!
@cold868 Жыл бұрын
My kids would love that!
@woodlandtreeworks3420 Жыл бұрын
They are super fun!
@salimahmed38992 жыл бұрын
bhai apna ke donon band Hone Ko Nahin dhanyvad
@lukasabdullahzionisvvisnub45992 жыл бұрын
Great good
@lukasabdullahzionisvvisnub45992 жыл бұрын
Yes,i need video knot like this step bystep with easy to see knot. Thank you
@user-ky5dk7kn5x2 жыл бұрын
А последний пример это вообще непонятно что и зачем, просто полная отсебятина на базе булиня, для получения двойного булиня есть настоящий элегантный и простой способ, смотритена канале Максим Чечетов
@user-ky5dk7kn5x2 жыл бұрын
На 0:58 неправильно показано продевание холового конца, правильно с другой стороны ходового
@joshpederson59262 жыл бұрын
Awesome video! Great tutorial. I make my own fishing lures and i was wondering how to cut down on waste and get most of the blanks i cut? So how much allowance from square to round do you allow? I know most pen blanks are 3/4".
@woodlandtreeworks34202 жыл бұрын
Thank you! The size of the blank depends on the pen barrel size. 3/4" square blank is good for the bigger size blanks and down. But you could cut it even smaller for a 7mm blank.
@joshpederson59262 жыл бұрын
I was unaware of that was the barrel size measurement, also was a bit unclear how to explain it. I do not make pens as of yet. I do however make fushing lures. So to be more clear if my lure body is 3/4 at its peak diameter how much do i need to add like 1/4 in so i start with a 1" blank? Thand for any help
@woodlandtreeworks34202 жыл бұрын
@@joshpederson5926 yeah a 1" blank would be a good size for that.
@maa_vankal_Charpai_kala2 жыл бұрын
Nice 🙏
@maa_vankal_Charpai_kala2 жыл бұрын
Nice 🙏
@daveboyt68102 жыл бұрын
Loved watching it go from a log to the final project. Those odd shapes are tricky, but you managed it nicely! Showed it to my wife, & now I've got another honey-do project!
@brettmcconochie2 жыл бұрын
kzread.info/dash/bejne/do17xtiFaZC2Y5M.html
@SciurusGray2 жыл бұрын
What do you do with the planks?
@woodlandtreeworks34202 жыл бұрын
They are perfect for resin tables, shelves, countertops, anything really.
@SciurusGray2 жыл бұрын
@@woodlandtreeworks3420 that sounds pretty cool.
@richjones54322 жыл бұрын
This is stupid & wastes everyone's time.
@woodlandtreeworks34202 жыл бұрын
Appreciate the feedback 😀
@ijleach2 жыл бұрын
Why?
@gregeastman66622 жыл бұрын
show us a finished pen
@woodlandtreeworks34202 жыл бұрын
Check out some of my other videos like this one. kzread.info/dash/bejne/d4ig3LJrdM2Zkrg.html
@gmrocwater99222 жыл бұрын
Nice job 👍, I'll be doing that in about 4 weeks 😃
@romaineathey65123 жыл бұрын
I did it myself. I used Stodoys woodworking plans for this.
@thomasschmitthomesteadproj60253 жыл бұрын
It great to find good wood in trees that you don't think you will
@jaytodd58093 жыл бұрын
So if you get a 4 ft extension on top of the trailer package do you also have to buy extra adjustable legs?..and do they include an extension harness for the brake lights..thx
@jaytodd58093 жыл бұрын
I want to add..assembly with music nicely done!
@woodlandtreeworks34203 жыл бұрын
If I'm not mistaken, a set of legs might be included in the 4' extension package. If not then yes you need to get another pair of legs. And the wiring they give you for the rear lights is long enough to extend to the back with one 4' extension. They don't recommend the trailer package if you get more then one 4' extension. But you can get two removable 2' extensions for either end.
@diamondaxe83 жыл бұрын
Hey, Did you dry the wood?
@woodlandtreeworks34203 жыл бұрын
I let all my pen blanks soak in pentacryl for 24 hours. This stabilizes them whether they were wet or dry. Then let the pen blank dry in a loosely closed cardboard box. I shoot for a moisture content of at most 10%, preferably less. Depending on the type of wood this may only take a few weeks after the pentacryl for the blank to be ready to turn.
@sonnybedez70403 жыл бұрын
Great job. How do I find this hardware
@woodlandtreeworks34203 жыл бұрын
Thank you! I get most of my hardware from pennstateind.com . Here is the link for this specific one. www.pennstateind.com/store/PKBPNKCGM.html
@sonnybedez70403 жыл бұрын
@@woodlandtreeworks3420 thank you
@a-lyssa14783 жыл бұрын
Hey you probably won’t see this but would you need to cure the wood or anything or would I be able to start my process from there?
@woodlandtreeworks34203 жыл бұрын
Good question. I always give my pen blanks a pentacryl soak for 24 hours and that stabilizes them amazingly.
@MaritimingNow3 жыл бұрын
What options did you purchase when you bought the mill?
@woodlandtreeworks34203 жыл бұрын
Thanks for watching! We didn't get any of the hydraulics. We got the full trailer kit as you can see, the glorified grill cover for the engine mount (definitely worth it). Also got the 4' permanent extension and another cross bar. Recently we did also purchase one removable 2' extension.
@MaritimingNow3 жыл бұрын
@@woodlandtreeworks3420 I was trying to figure out if the axle/wheels/jacks were options. Now I know.
@bradpj534 жыл бұрын
White oak? That will hold up nicely. I'm interested in milling curved timbers on my soon-to-arrive Wood-Mizer LT15.
@woodlandtreeworks34204 жыл бұрын
Very nice. It feels good being able to utilize wood that others might cast aside.
@jaruston4 жыл бұрын
Great assembly video. Thanks
@woodlandtreeworks34204 жыл бұрын
It was pretty fun too.
@jaruston4 жыл бұрын
I can't decide between the 29 or 36. But one of them are in the future!
@woodlandtreeworks34204 жыл бұрын
@@jaruston just remember the actual board that you can cut is less than you can fit on the machine. The max width for the 36 is 28".
@apolloniajuliano82714 жыл бұрын
Do you have video of how you engraved the name?
@woodlandtreeworks34204 жыл бұрын
Not yet, ill add one soon though
@apolloniajuliano82714 жыл бұрын
So cool!!
@woodlandtreeworks34204 жыл бұрын
Thanks! :)
@mainey974 жыл бұрын
Uncle Ben !!!These are so cool. The A team 🐯🐯🐯🐯🐯🐯🐯🐯🐯
@cwebster904 жыл бұрын
Awesome project. Best part is when the sand paper flew! 🤣
@woodlandtreeworks34204 жыл бұрын
Thanks!
@apolloniajuliano82714 жыл бұрын
The way you make the numbered dots 😱😱 awesome!!
@cwebster904 жыл бұрын
Wow! They look great! If only these were available online for purchase!?!
Пікірлер
That is one solid bench! When you cut the braces, if you just cut one angle then alternate the brace orientation you cut less & don’t lose the length of the triangle off cut🤓
I love my mute button.
That's poorly executed, obviously someone who is not a cabinetmaker - This is an example of what not to do.
😳 Promo*SM
Why is the winch so high? Put a pulley on top and lower the winch.
Great use! But you should not join/glue different species together. They will hold different moisture levels and expand/contract at different rates and separate.
That's true. I'm intrigued to see how this table lasts.
Good job 🎉
That doesn't seem like nearly enough glue.
No problem
Good job fam
Thank you!
Great job
youtube.com/@threestarfancywoodworks1902
Just came across your video, I recently turned a pen from a piece similar to your scraps & made a pen with the top half a semi live edge. One of my favourite pieces now!
Love it!
My kids would love that!
They are super fun!
bhai apna ke donon band Hone Ko Nahin dhanyvad
Great good
Yes,i need video knot like this step bystep with easy to see knot. Thank you
А последний пример это вообще непонятно что и зачем, просто полная отсебятина на базе булиня, для получения двойного булиня есть настоящий элегантный и простой способ, смотритена канале Максим Чечетов
На 0:58 неправильно показано продевание холового конца, правильно с другой стороны ходового
Awesome video! Great tutorial. I make my own fishing lures and i was wondering how to cut down on waste and get most of the blanks i cut? So how much allowance from square to round do you allow? I know most pen blanks are 3/4".
Thank you! The size of the blank depends on the pen barrel size. 3/4" square blank is good for the bigger size blanks and down. But you could cut it even smaller for a 7mm blank.
I was unaware of that was the barrel size measurement, also was a bit unclear how to explain it. I do not make pens as of yet. I do however make fushing lures. So to be more clear if my lure body is 3/4 at its peak diameter how much do i need to add like 1/4 in so i start with a 1" blank? Thand for any help
@@joshpederson5926 yeah a 1" blank would be a good size for that.
Nice 🙏
Nice 🙏
Loved watching it go from a log to the final project. Those odd shapes are tricky, but you managed it nicely! Showed it to my wife, & now I've got another honey-do project!
kzread.info/dash/bejne/do17xtiFaZC2Y5M.html
What do you do with the planks?
They are perfect for resin tables, shelves, countertops, anything really.
@@woodlandtreeworks3420 that sounds pretty cool.
This is stupid & wastes everyone's time.
Appreciate the feedback 😀
Why?
show us a finished pen
Check out some of my other videos like this one. kzread.info/dash/bejne/d4ig3LJrdM2Zkrg.html
Nice job 👍, I'll be doing that in about 4 weeks 😃
I did it myself. I used Stodoys woodworking plans for this.
It great to find good wood in trees that you don't think you will
So if you get a 4 ft extension on top of the trailer package do you also have to buy extra adjustable legs?..and do they include an extension harness for the brake lights..thx
I want to add..assembly with music nicely done!
If I'm not mistaken, a set of legs might be included in the 4' extension package. If not then yes you need to get another pair of legs. And the wiring they give you for the rear lights is long enough to extend to the back with one 4' extension. They don't recommend the trailer package if you get more then one 4' extension. But you can get two removable 2' extensions for either end.
Hey, Did you dry the wood?
I let all my pen blanks soak in pentacryl for 24 hours. This stabilizes them whether they were wet or dry. Then let the pen blank dry in a loosely closed cardboard box. I shoot for a moisture content of at most 10%, preferably less. Depending on the type of wood this may only take a few weeks after the pentacryl for the blank to be ready to turn.
Great job. How do I find this hardware
Thank you! I get most of my hardware from pennstateind.com . Here is the link for this specific one. www.pennstateind.com/store/PKBPNKCGM.html
@@woodlandtreeworks3420 thank you
Hey you probably won’t see this but would you need to cure the wood or anything or would I be able to start my process from there?
Good question. I always give my pen blanks a pentacryl soak for 24 hours and that stabilizes them amazingly.
What options did you purchase when you bought the mill?
Thanks for watching! We didn't get any of the hydraulics. We got the full trailer kit as you can see, the glorified grill cover for the engine mount (definitely worth it). Also got the 4' permanent extension and another cross bar. Recently we did also purchase one removable 2' extension.
@@woodlandtreeworks3420 I was trying to figure out if the axle/wheels/jacks were options. Now I know.
White oak? That will hold up nicely. I'm interested in milling curved timbers on my soon-to-arrive Wood-Mizer LT15.
Very nice. It feels good being able to utilize wood that others might cast aside.
Great assembly video. Thanks
It was pretty fun too.
I can't decide between the 29 or 36. But one of them are in the future!
@@jaruston just remember the actual board that you can cut is less than you can fit on the machine. The max width for the 36 is 28".
Do you have video of how you engraved the name?
Not yet, ill add one soon though
So cool!!
Thanks! :)
Uncle Ben !!!These are so cool. The A team 🐯🐯🐯🐯🐯🐯🐯🐯🐯
Awesome project. Best part is when the sand paper flew! 🤣
Thanks!
The way you make the numbered dots 😱😱 awesome!!
Wow! They look great! If only these were available online for purchase!?!
Was the wood dry or wet.
This wood was dry.