Men! 🤩😍🥰 So good looking and Cool Mini Bronco 😮!!! And is a performer to🎉 🐻❄️🏁🐼👌🏻
@pandacrawler6x65 күн бұрын
WoW 😮❤😮 Awesome And Cool RC!!!! 🐼🏁🐻❄️👌🏻
@Fernandoepg8 күн бұрын
I moded one inspired by your creation. kzread.info/dash/bejne/eouiy5Kck8evhJM.htmlsi=2e2erodrPH7sT208
@thesouthwestern9 күн бұрын
Pajero is awesome hehe
@Sfattucci9 күн бұрын
🤭💪
@chaoticadventure14 күн бұрын
Any idea where to get parts for these?
@Sfattucci14 күн бұрын
@@chaoticadventure part of rc car? Or part of course? Course is all selfmade ... car parts on aliexpress you can find all. Motor, servo, wheel, tire, axle ...
@user-lr4mr9xt8j15 күн бұрын
😃...Luar biasa..Keren Saya suka Dengan Tempilannya..dengan Skala yang Kecil / Mini Rc ini menjadi Sangat Ralistis.. dan mudah di bawa Kemana²..tidak Harus Memerlukan Kantong yang Besar ,, bisa di mainkan dimana saja , Tantangan Untuk mencari Medan Offroad yang Asik untuk bermain Bersamanya...❤ Saya Ingin Memilikinya...❤🙏😃
@Sfattucci15 күн бұрын
thanks!! 🤗
@dr.dosage63515 күн бұрын
man u r the best.
@Sfattucci15 күн бұрын
@@dr.dosage635 thanks 🤗
@ralptyrab.849516 күн бұрын
very cool !
@Sfattucci16 күн бұрын
🤗
@rccrawlerextreme16 күн бұрын
Nice 👍
@Sfattucci16 күн бұрын
🤗
@GunsandGuava24 күн бұрын
What an awesome idea, nice landscape, perfect for an off road adventure! I drive a 2013 F150 IRL but I am to scared to take it off road lol . Have a great weekend!
@Sfattucci24 күн бұрын
thanks! the spot is awesome for trail/crawl 🤗
@ralptyrab.849525 күн бұрын
is that a 1:64 scale accessories?
@Sfattucci25 күн бұрын
3d printed 1/35 scale
@dvfpv26 күн бұрын
Hello! what mods do you have on this ? does the body have two led buckets for headlight and one for taillight ? Thanks.
@Sfattucci26 күн бұрын
front one way, rear blocked and gyro. All other stock. and light ... have 4 on front and 4 on rear. like my latest kyosho Nissan 2000GT :)
@dvfpv25 күн бұрын
@@Sfattucci : Looks amazing man! Good stuff! Thanks for the reply.
@Sfattucci25 күн бұрын
@@dvfpv you're welcome 💪
@dvfpv22 күн бұрын
@@Sfattucci : Can I solder 4 leds in parallel for headlights and the same for taillights ? No issues with current ? Spec of the LED : Forward voltage: 2.8 ~ 5V Reverse current: 50 µA Continuous forward current: 20mA
@Sfattucci22 күн бұрын
@@dvfpv i did the same with my Nissan GT2000. parallel.
@Sidecharacter1912Ай бұрын
This is why I love small scale.
@SfattucciАй бұрын
me too 🤤🤭😜💪
@snorrevonflakeАй бұрын
Would love to see how you have done that. (Cut the body, make the bed and rear window)
@snorrevonflakeАй бұрын
Just got mine, i wish it was a little bit more performance oriented than scale looking. Maybe i am expecting too much, coming from modded SCX24s. A few little things would help, less weight on top with a lighter, more minimal body, slightly bigger tires for more ground clearance and softer springs or mounted just a bit different.
@SfattucciАй бұрын
just see playlist and my last custom pickup x43 :) or this : kzread.info/dash/bejne/iHyOxZh8ddOddNI.html
@thesouthwesternАй бұрын
Now that is smoooooth...!
@SfattucciАй бұрын
i love this kind of build, my favourite ( pickup/long wheelbase and FOC motor system )
@thesouthwesternАй бұрын
@@Sfattucci Yea it is AWESOME combo.
@SteveGhee420Ай бұрын
Hey mate, unrelated to this post but I have a problem with my Ldarc x43. I've connected it to the transmitter but it won't stop revving even if I'm not pressing throttle and the steering servo is spazzing out. Any ideas? Cheers
@SfattucciАй бұрын
No problem, i have also telegram group for this reason. So, try resetting the model and when you bind do it with the telemetry protocol. the procedure is to first put the remote control in bind mode and then the machine.
@SteveGhee420Ай бұрын
@Sfattucci no worries thank you 🤙
@FullKarenMusicАй бұрын
Nice! I thought that body would make an awesome scale trail truck.
@SfattucciАй бұрын
that body is perfect to crawl/trail. it is narrower :)
@joseywilds3133Ай бұрын
I do not own any FMS at the moment but this will be my first one when I do!!! Happy rcing my friend!!! I mean I will get the smasher RTR,
@SfattucciАй бұрын
smasher is a great micro monster truck :))
@Rc_Alex_76Ай бұрын
Yeah the smasher is great
@BidenmytimeАй бұрын
Put fenders on , holes look eww.
@SfattucciАй бұрын
it's a step build no finish :))
@snorrevonflakeАй бұрын
This would be cool as a crawler, a shame that it seems to have a long/fast transmission ratio.
@tifflynn2215Ай бұрын
Where did you score them wheels they look sweet
@SfattucciАй бұрын
thanks. is my own 3d printed wheel with full offset. on my thingiverse account to print :)
@snorrevonflakeАй бұрын
I enjoy watching this in slow motion.
@snorrevonflakeАй бұрын
Would buy if it came with slow motion mode.
@SfattucciАй бұрын
not have slowmotion. Only speed :)
@snorrevonflakeАй бұрын
Almost ordered one, then remembered that it does not come with a slow motion mode. Might stay with crawlers. And maybe Computer games for this kind of action.
@SfattucciАй бұрын
it's a great monster truck. only this, you can't crawl ... is only rear wheel drive :)
@snorrevonflakeАй бұрын
I would appreciate a "how to" video about the mods, also how you made the pickup body. Doesnt have to be long, just show a few things to give others and idea whats possible. (Writing this while i still wait for mine to arrive.)
@SfattucciАй бұрын
when i have time i make a new body for my friend ... and take a "how to" video to post here. :)
@snorrevonflakeАй бұрын
Awesome, better than my SCX24s.
@SfattucciАй бұрын
this is a very great micro "desk" crawler ... love it
@snorrevonflakeАй бұрын
I wonder how solid those are, if sth. breaks i throw it away ? Did you order more than one for spare parts ?
@SfattucciАй бұрын
untill now ... work perfect. no broken anything... and i "crawl" with it. see the playlist. abuse averyday 🤭
@meegssan5716Ай бұрын
Where can i get that servo?
@SfattucciАй бұрын
on Aliexpress here :tinyurl.com/mvvmmrtu
@meegssan5716Ай бұрын
@@Sfattucci Sweet! thanks!
@B2396BАй бұрын
This is perfect 🔥
@SfattucciАй бұрын
thanks, this micro rigs is awesome fun :)
@ralptyrab.8495Ай бұрын
hello, i have a question, does my ldarc x43 having issues such as stuck servo like it stuck turning left, and sometimes it jittering , whats the problem?
@SfattucciАй бұрын
need to take new. more x43 have this problem. mine until now is ok
@ralptyrab.8495Ай бұрын
@@Sfattucci the S17E Servo for x43 is hard to find, can we use other brand or model aside from this stock servo?
@SfattucciАй бұрын
@@ralptyrab.8495 is like a 1.7g servo of Orlandoo Hunter
@ralptyrab.8495Ай бұрын
@@Sfattucci do you have a facebook or ig where i could pm you? i have to show you some servo i saw at our local online shop, maybe you could help me?
@ralptyrab.8495Ай бұрын
@@Sfattucci or gmail
@EidstaRCАй бұрын
Would you consider making a shot video explaining how you did the chock mod? I have an extra set of shocks from an Orlandoo. Thx
@SfattucciАй бұрын
just change a metal pin inside the shock and change a spring inside, 2mm short of stock. the Orlandoo metal pin one is 1.5mm to long. so ... add extra torsion and lowering. :)
@Kingsvenn2 ай бұрын
Are you using the D4L system with the ecu? I have a furitek springtail motor, and wanted to keep the lights and sound from the D401T module (mines the MO1). This is my first ever rc car build, so I have no idea what I am doing lol. I wasnt sure if I could simply plug in a furitek brushless/brushed combo esc into the D401T.
@Sfattucci2 ай бұрын
if you don't use a D4L sustem, you need to built another system to have sound and light with brushless combo ( or with all other esc ). Dasmikro have a micro sound module ( you put on esc channel ). to have a light you need to build on new channel ( example ... ch3 ... of new radio/nano receiver ) with a extra channel switch where you build a led system you want.
@KingsvennАй бұрын
@@Sfattucci I currently have everything wired to the D4L modules. I was trying to avoid having to rewire everything and swap out by D4L module just to go brushless. So basically I can plug in the ESC to my D4L for the motor channel? Thanks again!
@SfattucciАй бұрын
@@Kingsvenn i think can work if you find how to swap trottle channel (ch2)
@Rc_Alex_762 ай бұрын
Power
@pandacrawler6x62 ай бұрын
Nice and Powerfull RC ❤
@tifflynn22152 ай бұрын
I just ordered the furitek Orlandoo 1/32 it was very expensive 269 bucks but it’s ready to run
@Sfattucci2 ай бұрын
also the combo brushless i use with 65€ is ready to run 😅
@Everett-xe3eg2 ай бұрын
This is an awesome little trailer
@Sfattucci2 ай бұрын
thanks. is shared for print on my thingiverse account :)
@Rc_Alex_762 ай бұрын
Jumps and lands great are u running oil shocks thanks
@Sfattucci2 ай бұрын
stock shock with custom "pen" spring, and some weight brass. :)
@Rc_Alex_762 ай бұрын
@Sfattucci ah I like the pen spring mod it looks like oil shocks the way it lands thanks 👍🏻
@aja_rc2 ай бұрын
🕺❤❤
@Sfattucci2 ай бұрын
🤜🤛
@giverthebeans97112 ай бұрын
How fast is it with the HW2300KV? I have a stock ryft and I was thinking about throwing one in it. But I don’t want to lose all of the bouncing speed
@Sfattucci2 ай бұрын
not have power of stock elettronic, i want to use only crawler. but ... is not bad. you have a power to bounce on the rock. to put down gear ratio i put on second gear and blocked on first. if you want more velocity this is best choise with fusion pro. i have on now a 14T pignon and for me is perfect for my use. See all playlist to see :)
Пікірлер
Men! 🤩😍🥰 So good looking and Cool Mini Bronco 😮!!! And is a performer to🎉 🐻❄️🏁🐼👌🏻
WoW 😮❤😮 Awesome And Cool RC!!!! 🐼🏁🐻❄️👌🏻
I moded one inspired by your creation. kzread.info/dash/bejne/eouiy5Kck8evhJM.htmlsi=2e2erodrPH7sT208
Pajero is awesome hehe
🤭💪
Any idea where to get parts for these?
@@chaoticadventure part of rc car? Or part of course? Course is all selfmade ... car parts on aliexpress you can find all. Motor, servo, wheel, tire, axle ...
😃...Luar biasa..Keren Saya suka Dengan Tempilannya..dengan Skala yang Kecil / Mini Rc ini menjadi Sangat Ralistis.. dan mudah di bawa Kemana²..tidak Harus Memerlukan Kantong yang Besar ,, bisa di mainkan dimana saja , Tantangan Untuk mencari Medan Offroad yang Asik untuk bermain Bersamanya...❤ Saya Ingin Memilikinya...❤🙏😃
thanks!! 🤗
man u r the best.
@@dr.dosage635 thanks 🤗
very cool !
🤗
Nice 👍
🤗
What an awesome idea, nice landscape, perfect for an off road adventure! I drive a 2013 F150 IRL but I am to scared to take it off road lol . Have a great weekend!
thanks! the spot is awesome for trail/crawl 🤗
is that a 1:64 scale accessories?
3d printed 1/35 scale
Hello! what mods do you have on this ? does the body have two led buckets for headlight and one for taillight ? Thanks.
front one way, rear blocked and gyro. All other stock. and light ... have 4 on front and 4 on rear. like my latest kyosho Nissan 2000GT :)
@@Sfattucci : Looks amazing man! Good stuff! Thanks for the reply.
@@dvfpv you're welcome 💪
@@Sfattucci : Can I solder 4 leds in parallel for headlights and the same for taillights ? No issues with current ? Spec of the LED : Forward voltage: 2.8 ~ 5V Reverse current: 50 µA Continuous forward current: 20mA
@@dvfpv i did the same with my Nissan GT2000. parallel.
This is why I love small scale.
me too 🤤🤭😜💪
Would love to see how you have done that. (Cut the body, make the bed and rear window)
Just got mine, i wish it was a little bit more performance oriented than scale looking. Maybe i am expecting too much, coming from modded SCX24s. A few little things would help, less weight on top with a lighter, more minimal body, slightly bigger tires for more ground clearance and softer springs or mounted just a bit different.
just see playlist and my last custom pickup x43 :) or this : kzread.info/dash/bejne/iHyOxZh8ddOddNI.html
Now that is smoooooth...!
i love this kind of build, my favourite ( pickup/long wheelbase and FOC motor system )
@@Sfattucci Yea it is AWESOME combo.
Hey mate, unrelated to this post but I have a problem with my Ldarc x43. I've connected it to the transmitter but it won't stop revving even if I'm not pressing throttle and the steering servo is spazzing out. Any ideas? Cheers
No problem, i have also telegram group for this reason. So, try resetting the model and when you bind do it with the telemetry protocol. the procedure is to first put the remote control in bind mode and then the machine.
@Sfattucci no worries thank you 🤙
Nice! I thought that body would make an awesome scale trail truck.
that body is perfect to crawl/trail. it is narrower :)
I do not own any FMS at the moment but this will be my first one when I do!!! Happy rcing my friend!!! I mean I will get the smasher RTR,
smasher is a great micro monster truck :))
Yeah the smasher is great
Put fenders on , holes look eww.
it's a step build no finish :))
This would be cool as a crawler, a shame that it seems to have a long/fast transmission ratio.
Where did you score them wheels they look sweet
thanks. is my own 3d printed wheel with full offset. on my thingiverse account to print :)
I enjoy watching this in slow motion.
Would buy if it came with slow motion mode.
not have slowmotion. Only speed :)
Almost ordered one, then remembered that it does not come with a slow motion mode. Might stay with crawlers. And maybe Computer games for this kind of action.
it's a great monster truck. only this, you can't crawl ... is only rear wheel drive :)
I would appreciate a "how to" video about the mods, also how you made the pickup body. Doesnt have to be long, just show a few things to give others and idea whats possible. (Writing this while i still wait for mine to arrive.)
when i have time i make a new body for my friend ... and take a "how to" video to post here. :)
Awesome, better than my SCX24s.
this is a very great micro "desk" crawler ... love it
I wonder how solid those are, if sth. breaks i throw it away ? Did you order more than one for spare parts ?
untill now ... work perfect. no broken anything... and i "crawl" with it. see the playlist. abuse averyday 🤭
Where can i get that servo?
on Aliexpress here :tinyurl.com/mvvmmrtu
@@Sfattucci Sweet! thanks!
This is perfect 🔥
thanks, this micro rigs is awesome fun :)
hello, i have a question, does my ldarc x43 having issues such as stuck servo like it stuck turning left, and sometimes it jittering , whats the problem?
need to take new. more x43 have this problem. mine until now is ok
@@Sfattucci the S17E Servo for x43 is hard to find, can we use other brand or model aside from this stock servo?
@@ralptyrab.8495 is like a 1.7g servo of Orlandoo Hunter
@@Sfattucci do you have a facebook or ig where i could pm you? i have to show you some servo i saw at our local online shop, maybe you could help me?
@@Sfattucci or gmail
Would you consider making a shot video explaining how you did the chock mod? I have an extra set of shocks from an Orlandoo. Thx
just change a metal pin inside the shock and change a spring inside, 2mm short of stock. the Orlandoo metal pin one is 1.5mm to long. so ... add extra torsion and lowering. :)
Are you using the D4L system with the ecu? I have a furitek springtail motor, and wanted to keep the lights and sound from the D401T module (mines the MO1). This is my first ever rc car build, so I have no idea what I am doing lol. I wasnt sure if I could simply plug in a furitek brushless/brushed combo esc into the D401T.
if you don't use a D4L sustem, you need to built another system to have sound and light with brushless combo ( or with all other esc ). Dasmikro have a micro sound module ( you put on esc channel ). to have a light you need to build on new channel ( example ... ch3 ... of new radio/nano receiver ) with a extra channel switch where you build a led system you want.
@@Sfattucci I currently have everything wired to the D4L modules. I was trying to avoid having to rewire everything and swap out by D4L module just to go brushless. So basically I can plug in the ESC to my D4L for the motor channel? Thanks again!
@@Kingsvenn i think can work if you find how to swap trottle channel (ch2)
Power
Nice and Powerfull RC ❤
I just ordered the furitek Orlandoo 1/32 it was very expensive 269 bucks but it’s ready to run
also the combo brushless i use with 65€ is ready to run 😅
This is an awesome little trailer
thanks. is shared for print on my thingiverse account :)
Jumps and lands great are u running oil shocks thanks
stock shock with custom "pen" spring, and some weight brass. :)
@Sfattucci ah I like the pen spring mod it looks like oil shocks the way it lands thanks 👍🏻
🕺❤❤
🤜🤛
How fast is it with the HW2300KV? I have a stock ryft and I was thinking about throwing one in it. But I don’t want to lose all of the bouncing speed
not have power of stock elettronic, i want to use only crawler. but ... is not bad. you have a power to bounce on the rock. to put down gear ratio i put on second gear and blocked on first. if you want more velocity this is best choise with fusion pro. i have on now a 14T pignon and for me is perfect for my use. See all playlist to see :)